jet airpresentationways

Aman KumarVishwanath Jha

Niraj MahapatraAnkur Aggarwal

Amit Kumar

Introduction: Maintenance Management

• Boeing supplied its MPT to Jet Airways

• MPT is maintenance performance toolbox of software solutions

• MPT gives quick access to streamline the cumbersome process of

customizing online maintenance manual

• Jet Airways engineering and Maintenance facility includes C checks

upgraded further to D checks

• Carries its maintenance activities at night halting statins at Chennai,

Kolkata and Bangalore.

Technical Dispatch Reliability

• Having the highest reliability rate of 99.2 % and above

• Maintenance operation can be divided into 3 categories:

Line maintenance

C or phase 10 checks(C checks)

Heavy maintenance checks(D checks)

Line Maintenance

• Consists of

Routine, Scheduled maintenance checks

Preflight, daily and overnight checks

any diagnostic and routine repairs

C Checks

• Carried out after a maximum of 4800 flight hours

takes an average of 8 days for its Boeing Aircraft

• Sometimes results in a loss of service for a period of up to 10 days

• Leased a maintenance facility at Bangalore from HAL on its Boeing

Aircraft

Heavy Maintenance or D checks

• Consists of more complex inspections

• Servicing of Aircrafts that require longer maintenance period

• Follows a prescheduled agenda of major overhauls defined in the Aircraft

manual

• Based on number of flights flown by the Aircraft or the age of the Aircraft

• A typical D check may result in a loss of service of a Boeing 737 aircraft

for approx. 45 days

• Currently carried by the US FAA and the DGCA

Cost control Measures

• Cost of quality depends upon

Prevention

Appraisal

Internal Failure

External Failure

• TQM

• TPM

• Preventive Maintenance can be used

Areas of quality Management and Operational Strategy

• Operations Strategy

Planning, analyzing, implementation and control

Decisions that relate to the design of a process and infrastructure

needed to support it.

Quality, assurance and control approaches

Make great products and services & to deliver service quality

Make the product to Deliver products when serviced

Ability to deal with dynamic market demand

Long term competitive strategies with Corporate strategies

Flexibility

Total Quality Maintenance Customer Satisfaction Value Fitness for use Support Employee Involvement Cultural Changes Teams1. Problem solving teams2. special purpose teams3. self-managed teams Continuous improvement in performance PDSA (Plan-Do-Study-Act) Lean system can be used

Bath Tub Curve• Used in order to maintain and ensure the system reliability

Raliability

Maintenance

• It has established a maintenance hanger complex with workshop

and allied facilities at Mumbai.

• The cost of the maintenance hanger and related workshops and

engineering facilities is US Dollar 15 Million.

• The hanger is used for C checks, line checks, storage, and minor

rectification of engines and workshops for composite structural

repairs.

THANK YOU