jetrike mkii plans
Post on 27-Apr-2015
268 Views
Preview:
DESCRIPTION
TRANSCRIPT
JETRIKE - MkIIAn Open DesignCopyright (c) 2007, Henry ThomasAll rights reserved.
Acknowledgments: thanks to 25mhz, Dirk Bonne, George Durbridge and Carl Punton for their suggestions.
Redistribution and use of plans, with or without modification, are permitted provided that the following conditions are met:
Redistributions of plans must retain the above copyright notice, this list of conditions and the 1.following disclaimer.
Neither the name of Henry Thomas or JETRIKE nor the names of any contributors may be used to 2.endorse or promote products derived from these plans without specific prior written permission.
THESE PLANS ARE PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INJURY OCCASIONING BODILY HARM OR DEATH; LOSS OF PROFITS; PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THESE PLANS, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
A
C
B
C
D
1
1
2
2
3 4
A
B
3 4
D
Bottom Bracket Mount
Boom
Left Dropout
Tiller
Handle Bars
Seat Frame
Left Swing Arm
Right Swing Arm
Rocker ArmFrame
Right Dropout
Steering Pivot
Spec
ific
atio
ns
Seat Brace
Forks
A
C
B
C
D
1
1
2
2
3 4
A
B
JETRIKE.COM
Dwg. No.
MkII
Title
FWD Tilting Recumbent Trike
Size Rev
AA4Scale 1:10 Sheet 2 of 21
Redistribution and use of these plans in electronic or printed form, are permitted
provided all the conditions of the open designlicense are met. See Page 1 for details.
AN OPEN DESIGN
© Henry Thomas 2007, All Rights Reserved.
Drawn by: Henry Thomas
Material: C450
Weight: 12.8kg
Finish: Painted
Do Not Scale Drawing
30
40
36
68
39.7
34.8
1.37
R6
6
12
12
39.7
10
15
2012 39
.7
40
14 14
Tap withM6 Thread
Item 1Bottom Bracket Shell
1.37 x 24 TPI
Item 9BB Mount
Sleeve
Item 43BB Mount
BinderA
C
B
C
D
1
1
2
2
3 4
A
B
JETRIKE.COM
Dwg. No.
MkII
Title
BB Mount
Size Rev
AA4Scale 1:1 Sheet 3 of 21
Redistribution and use of these plans in electronic or printed form, are permitted
provided all the conditions of the open designlicense are met. See Page 1 for details.
AN OPEN DESIGN
© Henry Thomas 2007, All Rights Reserved.
Drawn by: Henry Thomas
Material: C450
Weight: 260g
Finish: Painted
Do Not Scale Drawing
19
7.5
7.512.5
50.5
°
66.5
° 24.8369.5
36.2
145.8
23.4
A 25
25
35
125
45°
20
40
VIEW A
Item 10SHS 40 x 2.5mm
Item 14SHS 35 x 1.6mm
Item 15
Item 24SHS 25 x 1.6mm
Item 26Item 27
Item 28
Item 29
Item 30
Item 45Square 12mm
Item 34Flat 40 x 6mm
Item 25
A
C
B
C
D
1
1
2
2
3 4
A
B
JETRIKE.COM
Dwg. No.
MkII
Title
Drive Train
Size Rev
AA4Scale 1:4 Sheet 4 of 21
Redistribution and use of these plans in electronic or printed form, are permitted
provided all the conditions of the open designlicense are met. See Page 1 for details.
AN OPEN DESIGN
© Henry Thomas 2007, All Rights Reserved.
Drawn by: Henry Thomas
Material: C450
Weight: 3597g
Finish: Painted
Do Not Scale Drawing
506.
9
498.
4
8.4
35
13.5
°
Item
14
163
186.6
8.4 15.2
13.5° 23.5°
Item 15
40
73 Item
10
40
85
R20
12.70.50
20
20
Item
34
A
C
B
C
D
1
1
2
2
3 4
A
B
JETRIKE.COM
Dwg. No.
MkII
Title
Drive Train
Size Rev
AA4Scale 1:2 Sheet 5 of 21
Redistribution and use of these plans in electronic or printed form, are permitted
provided all the conditions of the open designlicense are met. See Page 1 for details.
AN OPEN DESIGN
© Henry Thomas 2007, All Rights Reserved.
Drawn by: Henry Thomas
Material: C450
Weight: 3597g
Finish: Painted
Do Not Scale Drawing
25
25
19.8° 45°
9 Item 26
243.1
218.1
25
2545°
243.1
232.7
10.4
22.5°
Item 27
Item 2760
.1
24.7
10.4
25
45°
22.5
°
Item 28
63.6
28.3
2510
.4
22.5
°45
°
Item 24
121.6
111.2
22.5°
10.4
113.8
19.8°
122.7
9
Item 25
Item 25
A
C
B
C
D
1
1
2
2
3 4
A
B
JETRIKE.COM
Dwg. No.
MkII
Title
Drive Train
Size Rev
AA4Scale 1:2 Sheet 6 of 21
Redistribution and use of these plans in electronic or printed form, are permitted
provided all the conditions of the open designlicense are met. See Page 1 for details.
AN OPEN DESIGN
© Henry Thomas 2007, All Rights Reserved.
Drawn by: Henry Thomas
Material: C450
Weight: 3597g
Finish: Painted
Do Not Scale Drawing
334.3
383.4
49.1
27°
25
53.7 84
.1
30.3
39.5°
Item 29
Item
30
19
50
Item 45
12
50
2
Tap withM6 Thread
6
12
25
A
C
B
C
D
1
1
2
2
3 4
A
B
JETRIKE.COM
Dwg. No.
MkII
Title
Drive Train
Size Rev
AA4Scale 1:2 Sheet 7 of 21
Redistribution and use of these plans in electronic or printed form, are permitted
provided all the conditions of the open designlicense are met. See Page 1 for details.
AN OPEN DESIGN
© Henry Thomas 2007, All Rights Reserved.
Drawn by: Henry Thomas
Material: C450
Weight: 3597g
Finish: Painted
Do Not Scale Drawing
4062
.5
M10 x 1mm
R12
R8
R5
10
25.5
3445°
29.5
5512
62.5
40
R5
1012.5
12.5
45°
55
20
20
Item 32Flat 40 x 6mm
Item 33
A
C
B
C
D
1
1
2
2
3 4
A
B
JETRIKE.COM
Dwg. No.
MkII
Title
Dropouts
Size Rev
AA4Scale 1:1 Sheet 8 of 21
Redistribution and use of these plans in electronic or printed form, are permitted
provided all the conditions of the open designlicense are met. See Page 1 for details.
AN OPEN DESIGN
© Henry Thomas 2007, All Rights Reserved.
Drawn by: Henry Thomas
Material: C450
Weight: 258g
Finish: Painted
Do Not Scale Drawing
22.225
0.875
R60
120
60°
200
84.9°
Item 4
Item 5
A
C
B
C
D
1
1
2
2
3 4
A
B
JETRIKE.COM
Dwg. No.
MkII
Title
Handle Bars
Size Rev
AA4Scale 1:2 Sheet 9 of 21
Redistribution and use of these plans in electronic or printed form, are permitted
provided all the conditions of the open designlicense are met. See Page 1 for details.
AN OPEN DESIGN
© Henry Thomas 2007, All Rights Reserved.
Drawn by: Henry Thomas
Material: C450
Weight: 458g
Finish: Painted
Do Not Scale Drawing
Item 11SHS 40 x 1.6mm
Item 12Item 13
Item 35Flat 32 x 5mm
Item 36
Item 37
Gusset Item 40Plate 38 x 52 x 3mm
Item 2CHS Nominal Bore 32mm
Extra Heavy
Item 17
Item 31SHS 25 x 1.6mm
Item 16SHS 35 x 1.6mm
2.5
16.5
16°
120
7
12.6
37.5°
A
C
B
C
D
1
1
2
2
3 4
A
B
JETRIKE.COM
Dwg. No.
MkII
Title
Frame
Size Rev
AA4Scale 1:4 Sheet 10 of 21
Redistribution and use of these plans in electronic or printed form, are permitted
provided all the conditions of the open designlicense are met. See Page 1 for details.
AN OPEN DESIGN
© Henry Thomas 2007, All Rights Reserved.
Drawn by: Henry Thomas
Material: C450
Weight: 3362g
Finish: Painted
Do Not Scale Drawing
40
332.
2
173.
4
BIt
em 1
1
4028
330.
3
35°
37.5°
Item
11
35
35
17.5
17.5
15.4
20.3
46.1
DETAIL B SCALE 1 : 1
212.4
184.4
28
35°
Item 12
70
20.1
16°
Item 13
73
35
Item
16
70°
40
35
5
49°8
20.4
30.2
37.1
52
Item 40
A
C
B
C
D
1
1
2
2
3 4
A
B
JETRIKE.COM
Dwg. No.
MkII
Title
Frame
Size Rev
AA4Scale 1:2 Sheet 11 of 21
Redistribution and use of these plans in electronic or printed form, are permitted
provided all the conditions of the open designlicense are met. See Page 1 for details.
AN OPEN DESIGN
© Henry Thomas 2007, All Rights Reserved.
Drawn by: Henry Thomas
Material: C450
Weight: 3362g
Finish: Painted
Do Not Scale Drawing
313
35
Item
17
18.3
°
436.1
352.4
75.4 8.3
25
18.3°
Item 31
R16 12.70.50
112
827
.5
80
20.5
Item 35
R16 12.70.50
32
43.5 27
.5
Item37 Item 36
32
73.5
R16
12.70.5
057.5
A
C
B
C
D
1
1
2
2
3 4
A
B
JETRIKE.COM
Dwg. No.
MkII
Title
Frame
Size Rev
AA4Scale 1:2 Sheet 12 of 21
Redistribution and use of these plans in electronic or printed form, are permitted
provided all the conditions of the open designlicense are met. See Page 1 for details.
AN OPEN DESIGN
© Henry Thomas 2007, All Rights Reserved.
Drawn by: Henry Thomas
Material: C450
Weight: 3362g
Finish: Painted
Do Not Scale Drawing
Item 42Round 20mm
6003 or 7003Bearing Housing
OD 35mmID 17mmW 10mm
Item 2CHS Nominal Bore 32mm
Extra Heavy
42.4
37
32.6
70 50
10
42.4
10
20
17
12.7
0.5050
17
1010
A
C
B
C
D
1
1
2
2
3 4
A
B
JETRIKE.COM
Dwg. No.
MkII
Title
Steering Pivot
Size Rev
AA4Scale 1:1 Sheet 13 of 21
Redistribution and use of these plans in electronic or printed form, are permitted
provided all the conditions of the open designlicense are met. See Page 1 for details.
AN OPEN DESIGN
© Henry Thomas 2007, All Rights Reserved.
Drawn by: Henry Thomas
Material: C450
Weight: 366g
Finish: Painted
Do Not Scale Drawing
127.5
Item 18
Item 19
Item 3
35
82.3
R16.9200
30R1
5
8
17.5
17.5
30
R15
8
290
35
2.5
2.526
0
17.5
A
C
B
C
D
1
1
2
2
3 4
A
B
JETRIKE.COM
Dwg. No.
MkII
Title
Rocker Arm
Size Rev
AA4Scale 1:2 Sheet 14 of 21
Redistribution and use of these plans in electronic or printed form, are permitted
provided all the conditions of the open designlicense are met. See Page 1 for details.
AN OPEN DESIGN
© Henry Thomas 2007, All Rights Reserved.
Drawn by: Henry Thomas
Material: C450
Weight: 750g
Finish: Painted
Do Not Scale Drawing
Item 3CHS Nominal Bore 25mm
Extra Heavy
33.7
7.93
80.
3125
7.93
80.
3125
24.7
33.7
28.5751.125
70 4.5
2.563
33.7
28.575
1.125
24.7
R8Bearing Housing
OD 1 1/8"ID 1/2"W 5/16"
A
C
B
C
D
1
1
2
2
3 4
A
B
JETRIKE.COM
Dwg. No.
MkII
Title
Swing & Rocker Pivot
Size Rev
AA4Scale 1:1 Sheet 15 of 21
Redistribution and use of these plans in electronic or printed form, are permitted
provided all the conditions of the open designlicense are met. See Page 1 for details.
AN OPEN DESIGN
© Henry Thomas 2007, All Rights Reserved.
Drawn by: Henry Thomas
Material: C450
Weight: 205g
Finish: Painted
Do Not Scale Drawing
Item 3CHS Nominal Bore 25mm
Extra Heavy
Item 21
Item 22
Item 23
Item 20SHS 35 x 1.6mm
Item 43Round 20mm
Endcap Item 41Plate 35 x 35 x 1.5mm
Item 20
35
Item 43
20
14
84.5
17.5
R1530
2.5
55
R16.9
15
7°
A
C
B
C
D
1
1
2
2
3 4
A
B
JETRIKE.COM
Dwg. No.
MkII
Title
Swing Arm
Size Rev
AA4Scale 1:2 Sheet 16 of 21
Redistribution and use of these plans in electronic or printed form, are permitted
provided all the conditions of the open designlicense are met. See Page 1 for details.
AN OPEN DESIGN
© Henry Thomas 2007, All Rights Reserved.
Drawn by: Henry Thomas
Material: C450
Weight: 951g
Finish: Painted
Do Not Scale Drawing
51.5
14.5
35
22.5°
Item
21
R16.9
66
Item 21
229.8
229.8
14.514.5
244.3
22.5°
22.5°
Item 22 83.5 69
35
14.5
22.5°
Item
23
20
35
17.5
17.5
Item
23
A
C
B
C
D
1
1
2
2
3 4
A
B
JETRIKE.COM
Dwg. No.
MkII
Title
Swing Arm
Size Rev
AA4Scale 1:2 Sheet 17 of 21
Redistribution and use of these plans in electronic or printed form, are permitted
provided all the conditions of the open designlicense are met. See Page 1 for details.
AN OPEN DESIGN
© Henry Thomas 2007, All Rights Reserved.
Drawn by: Henry Thomas
Material: C450
Weight: 951g
Finish: Painted
Do Not Scale Drawing
303
40
Item 6Tube OD 3/4 x 0.064"
Item 7
Item 8
Item 38Flat 20 x 5mm
Item 39
Item
8
R10
R10820
45.1 47.6
Item
38
[0.375]R9.5
Item
8
20
5
83.8 75.9
19.10.75
90.2
7.9
22.5
°
R10850
20
10
40
Item
39
A
C
B
C
D
1
1
2
2
3 4
A
B
JETRIKE.COM
Dwg. No.
MkII
Title
Seat
Size Rev
AA4Scale 1:1 Sheet 18 of 21
Redistribution and use of these plans in electronic or printed form, are permitted
provided all the conditions of the open designlicense are met. See Page 1 for details.
AN OPEN DESIGN
© Henry Thomas 2007, All Rights Reserved.
Drawn by: Henry Thomas
Material: C450
Weight: 2332g
Finish: Painted
Do Not Scale Drawing
50°
50
21°
10°
50
230
190
460
120
116.6
Item 6
R9.50.375
45°
450
85Item 7
A
C
B
C
D
1
1
2
2
3 4
A
B
JETRIKE.COM
Dwg. No.
MkII
Title
Seat
Size Rev
AA4Scale 1:3 Sheet 19 of 21
Redistribution and use of these plans in electronic or printed form, are permitted
provided all the conditions of the open designlicense are met. See Page 1 for details.
AN OPEN DESIGN
© Henry Thomas 2007, All Rights Reserved.
Drawn by: Henry Thomas
Material: C450
Weight: 2332g
Finish: Painted
Do Not Scale Drawing
1
23
6
4
5
7
9
10
11
12
13
18
19
16
14
15
17
21
2223
8
20
25
26
27
28
29
30
31
33
32
34
35
37
36
38
39
44
45
41
42
43
40
24
A
C
B
C
D
1
1
2
2
3 4
A
B
3 4
D
ITEM NO. DESCRIPTION QTY. LENGTH TOTAL1 BB Shell 1.37 x 24 TPI 1 682 CHS Nominal Bore 32mm Extra Heavy 1 70 703 CHS Nominal Bore 25mm Extra Heavy 3 70 2104 Tube OD 7/8 x 0.064 inch 1 200 2005 Tube OD 7/8 x 0.064 inch 1 365.7 365.76 Tube OD 3/4 x 0.064 inch 2 807.3 1614.67 Tube OD 3/4 x 0.064 inch 3 482.8 1448.48 Tube OD 3/4 x 0.064 inch 2 90.2 180.49 SHS 40 x 40 x 2.0mm 1 40 4010 SHS 40 x 40 x 2.0mm 1 73 7311 SHS 40 x 40 x 1.6mm 1 358.8 358.812 SHS 40 x 40 x 1.6mm 1 212.4 212.413 SHS 40 x 40 x 1.6mm 1 72.8 72.814 SHS 35 x 35 x 1.6mm 1 506.9 506.915 SHS 35 x 35 x 1.6mm 1 186.6 186.616 SHS 35 x 35 x 1.6mm 1 73 7317 SHS 35 x 35 x 1.6mm 1 313 31318 SHS 35 x 35 x 1.6mm 1 82.3 82.319 SHS 35 x 35 x 1.6mm 1 290 29020 SHS 35 x 35 x 1.6mm 2 100 20021 SHS 35 x 35 x 1.6mm 2 66 13222 SHS 35 x 35 x 1.6mm 2 244.3 488.623 SHS 35 x 35 x 1.6mm 2 83.5 16724 SHS 25 x 25 x 1.6mm 2 63.6 127.225 SHS 25 x 25 x 1.6mm 2 122.7 245.426 SHS 25 x 25 x 1.6mm 2 161.7 323.427 SHS 25 x 25 x 1.6mm 2 243.1 486.228 SHS 25 x 25 x 1.6mm 2 60.1 120.229 SHS 25 x 25 x 1.6mm 1 383.4 383.430 SHS 25 x 25 x 1.6mm 1 84.1 84.131 SHS 25 x 25 x 1.6mm 2 436.1 872.232 Flat 40 x 6mm 1 96.5 96.533 Flat 40 x 6mm 1 75 7534 Flat 40 x 6mm 2 85 17035 Flat 32 x 5mm 2 73.5 14736 Flat 32 x 5mm 2 112 22437 Flat 32 x 5mm 2 43.5 8738 Flat 20 x 5mm 2 45.1 90.239 Flat 20 x 5mm 2 50 10040 Gusset Plate 38 x 52 x 3mm 2 38 x 10441 Endcap Plate 35 x 35 x 1.5mm 3 35x 10542 Round 20mm 1 70 7043 Round 20mm 2 35 7044 Square 12mm 2 14 2845 Square 12mm 2 11.5 23
TOTALS Tube OD 7/8 x 0.064 inch 565.7Tube OD 3/4 x 0.064 inch 3243.4
SHS 40 x 40 x 2.0mm 113SHS 40 x 40 x 1.6mm 644SHS 35 x 35 x 1.6mm 2439.4SHS 25 x 25 x 1.6mm 2642.1
Flat 40 x 5mm 341.5Flat 32 x 5mm 458Flat 20 x 5mm 190.2Round 20mm 140Square 12mm 51
top related