kettmaps user guide ios (deutsch)

1

version 2.3

Iphone / Ipad Guide

S-Line Display compatible

Premium Display compatible

2

With KETTMaps / S-FIT app, you can run, ride or rowing over more

than 100,000km of motion videos all over the world and daily updated

by the users themselves. Try to follow their rhythm under the same

conditions at the pace they were recorded. Use the KINOMAP portal

and choose you own real life video. Increase your fitness by using your

own interval in resistance or in power mode.

Connect directly your compatible KETTLER equipment. Alternatively,

use the front facing camera giving you an optical cadence, stride or

stroke sensor.

3

1. Account

4

If you want to use KETTMaps, you have first to connect using

your Kinomap account. Once your login is successful, you can

start your training session. If you do not log-off, you will remain

logged next time you launch the App.

If you do not have a KETTMaps / Kinomap account, please Sign

In to get a free account.

Sign In

5

The default version is free, giving you access to a set of free videos as well as interval

workouts.

A subscription is required later on to get access to all eligible content including thousands of

real life videos, a multiplayer mode, a heart rate control workout and many more.

After the first login, the app can prompt you for an activation code. If you have one, enter it in

the appropriate field settings to activate your subscription for the app.

You can call the option >>add an activation code<< whenever you need later on.

Activation code

6

You can also subscribe for the service, based on a monthly or yearly subscription, giving

you access to enhanced features.

Go to Settings >> subscribe to KETTMaps >> KETTMaps

After activation, see your subscription on my subscription.

Activation code

7

2. Connection

8

3. IPhone / IPad connection

During two minutes, you can connect S- Line device with your

smartphone. Ensure Bluetooth is ON. Then go to the Bluetooth settings

inside your IPhone and press on showing fitness device.

Preparation of BluetoothKETTLER S-Line Device

1. Make the fitness computer visible:

2. Press the OK Button for more than 5 seconds

When the Bluetooth name is displayed and the outer ring changes the

color, the device is ready for Bluetooth connection to a smartphone /tablet

for 2 minutes. Figure similar

Example: Racer S A73F69

9

Equipment connectionKETTLER S-Line device

4. successful connection if seeing the blue ring

Starting App

5. Go to Settings / Equipment to add a new equipment for

wireless communication.

6. Add a new equipment with the button +.

7. Effect step 1 – 4 until your device was listed successful.

Outer Ring will light up

constantly blue

You can add a new equipment. Once

done, you can also add an additional

sensor (cadence, Heart Rate….)

10

Preparation of bluetoothKETTLER E-Premium Display

1. Premium display visible

Turn on Bluetooth at the display of the device.

device settings > Bluetooth ON

2. Change the mode to APP/PC

device name and device number available below. Go

back to the main menu.

Figure similar

example: ERGO C12 Display

3. Iphone /Ipad connection

It is possible, to find your device on smartphone / tablet

which support BLE 4.0.

You can pair the display and the app directly from

inside the app.

You can see the device, as soon as

bluetooth is turned ON inside the device

11

Equipment connectedKettler E-Premium Display

Ensure you have saved your training equipment after selection.

Go on the Settings > Equipment > New equipment

When the App is connected with the fitness computer, the display is showing the

following message: „device connected to Kettler supported Software“ .

On your training screen, you can see your exercise detection device. Once

confirmed, you can start training.

For a 2nd use , you do not need to confirm the Bluetooth connection of the device

again. You can start your training session directly.

Premium Display is not connected

Premium Display connected with the

app and ready to start

12

Equipment connection

Start the App

Go to the main menu to add new equipment.

Add new equipment with the + button

Select your own equipment and model from the list

13

Equipment connectionUsing your fitness device with external sensor

Using your fitness device with optical sensor

External Sensor: You can also use an external sensor like heart rate sensor by pressing + button to add new

sensor.

Optical Sensor: If you do not have any Bluetooth device for a wireless communication, you can use an

optical sensor (front camera) for simulate the speed.

Search for the correct training device to add additional sensor or select a training device with sensor /

camera. You can also select the optical sensor on device detection at the start of the training.

14

Equipment connectedKETTLER S-Line Device

Ensure that you have saved your training equipment after its selection.

The equipment is listed on the Settings > Equipment > Current equipment.

The app is connected with the computer set on your fitness equipment , if the

outer ring lights up constantly blue or comparable Bluetooth indication.

You can now start with your training.

On the training display, you see your exercise detection device.

For a 2nd use, you have to confirm the known device in the Bluetooth settings of

the IPhone / IPad and then start app.

15

3. Training

16

There are several lists of videos made available, on which you can choose the video you want

to train on it during your workout session. There is a filter function to ensure you get access to

the videos you are looking for (Featured, popular, most viewed, most recent, duration,

distance, incline…)

Videos selection

For each video, you can see relevant information: its name,

the contributor (who published the video), country, duration,

distance, average of positive slope, average speed.

17

At the top of the screen are displayed the video data and other relevant

information.

At the bottom, you can switch between 4 tabs showing alternatively the map,

the elevation profile, a dashboard and overall track information.

Workout display

Start Screen

Seeing profile on the left and training parameters on the right side.

18

On the screen, you get instructions when having to adjust the resistance

according to the elevation profile (altitude) when using a cadence or an

optical sensor.

When being connected to the KETTLER device wireless, you can still

change the resistance with „+“ and „-“

Set resistance / gears

19

Start your workout

To initiate your training session,

press Start

Select your movement, mode and

equipment.Wait few seconds to initiate the video

20

If you want to pause or stop the workout, just stop pedaling or use the Pause button in the corner of the

workout. Click on „resume“ text or icon to resume an unachieved workout.

Stop workout

Click here to resume the

training session.

21

Join the profile training for your individual workout plan and use appropriate profiles. If the interactive device

is connected with the app, you can decide, which type of training do you want to have. Select “Resistance” for

a level adjusted training or “ Power” for a classic RPM independent ergometer training.

Profile training

22

You only have to choose the time (< >) for count down and start training. With the Button + and - you can

change the selected parameter.

Profile training

Easy and clearly presented profile training with your

Kettler device. Change the difficulty in % or the target

power.

23

Do you use a cross trainer for your training and add it as the same? In that case, we suggest running tracks for an elliptical

movement, these running videos being more accurate than cycling ones.

Please search for running videos even if cycling videos are possible as well. Don’t forget to set your training device as running

before start.

Specials

24

Do you want to train in portrait or in landscape mode? Please select the suitable position of the tablet before

you select a video. A change of the mode during training is not possible when using an iPhone or iPad.

Specials

25

4. Reporting

26

Open the main menu on the left hand side to click on “Training log” .

You can see here the history of your past workouts including name of the video you

trained, date of that workout, performed duration and distance.

Click on any specific workout to get all information.

Training logs

27

Your training log includes a map, a summary and a set of detailed charts reporting your past speed,

power, cadence, heart rate.

Note that the workout log can be automatically exported to various platforms including RunKeeper,

Strava or Selfloops.

Training logs

28

5. Search

29

There are several ways to find the appropriate video. You can search by

clicking on the search bar. Once you typed at least 3 characters, an auto

completion search is made.

You can also have a geographical search. Go

to the main menu to select “Map”.

Search

30

6. Settings

31

Go to the main menu to the Settings and set your user details including units, height, weight, birthday, gender,

frontal area. There are also some advanced settings to complete.

User Settings

32

Playlists

Search for more public playlists within

the app.

Create and use your individual playlists of your favorite videos directly from your account. You can share it for

everybody (public) or only for your own.

33

7. Other

34

The App is optimized for an external display: please use an HDMI adaptor opr Apple TV via Air Play.

External display

35

The Help menu gives you access to the online support

including FAQ / trouble ticketing.

Help & FAQ