knife gate valves - redvalve.com · the legendary knife gate valve for tough slurries red valve...
Post on 01-Sep-2019
16 Views
Preview:
TRANSCRIPT
KNIFE GATE VALVESFor Handling Tough Slurries
The Legendary Knife Gate Valve for Tough Slurries
Red Valve Slurry Knife Gate Valves are designed for on/off service. A heavy-duty, stainless steel gate passes through two cartridge-reinforced rubber slurry seats. These special elastomer slurry seats provides a drop tight seal. When the valve is in the open position, the full port eliminates flow obstructions, keeping abrasive wear to a minimum.
Rugged and Dependable Service
KNIFE GATE VALVESFor Handling Tough Slurries
Series DX Valves used for tailings isolation at the bottom of thickener in a Peruvian Mine.
Series D Flexgate Valves used in surge bin overflow for frac sand mining.
Pnuematic cylinder actuated Series DX Valves used for tailings service at a copper mine in Mexico.
The topworks, including the gate, in our knife gate valves require very little maintenance. The only replacement parts in the Series DX are the cartridge slurry seats. In the Series D Flexgate, the only replacement parts are cartridge slurry seats and packing. Both of these valves have a unique design that allows the slurry seats to be replaced easily, with no valve disassembly required. The valve is simply unbolted from the line, the old seats are removed, and the new slurry seats are inserted into the valve.
The Series DX has a wiper blade that eliminates the need for packing. The Series D Flexgate has its packing material contained within a unique “inverted” packing box that simplifies replacement. The valves can remain inline while their topworks, gates and packing boxes are removed. Both of these innovative designs eliminate the need to dig old packing from deep within a valve body.
KNIFE GATE VALVESFor Handling Tough Slurries
Pulp and Paper MillsRed Valve Knife Gate Valves have many uses throughout the papermak-ing process. They are ideally suited for the harsh external environment in pulping areas. The stainless steel gate ensures a positive shutoff, even through pulp fibers. The precision-machined gate keeps packing wear to a minimum.
Water & Wastewater Treatment PlantsLarge Diameter Knife Gate Valves are often used in water and wastewater treatment plants and stormwater pumping stations. The positive shutoff and reliable performance of Red Valve Knife Gate Valves make them ideal for a variety of applications, such as pump isolation, on materials ranging from stormwater to raw sewage, grit and sludge.
Power IndustryRed Valve Knife Gate Valves are ideal for widespread use throughout a fossil uel power plant, with fly ash, bottom ash, lime and cooling water all popular applications. Low operating torque provided by the double-seal ACME stem makes them the preferred choice of operational personnel. A specially designed, metal-seated valve is available for high-temperature fly and bottom ash.
General IndustryChemical processing, brewing, cement, tanneries, sugar mills, chemical plants, animal feed manufacturing and many other industries all benefit from Red Valve Knife Gate Valves. Series DX and Series D Valves are used in many different industries where a low-profile, high-performance valve is needed. Popular installations include hopper discharge valves, pump isolation valves, diverter valves, emergency shutoff valves and tank-drain valves.
A Knife Gate Solution for Every Industry
Mining IndustryRed Valve Knife Gate Valves are widely used in copper and phosphate mines and many mining-related processes, including chemical separation and thickener underflow lines. Replaceable seats on the Series DX and Series D make them ideal for abrasive applications. Both offer outstanding performance and value.
Series DXRed Valve’s Series DX Slurry Knife Gate Valves are the most durable and user-friendly valves avaiable for difficult slurry applications. The fully elastomer-lined DX Valveprevents slurry build-up or dewatering by eliminating the seat cavity. Bodies madefrom ductile iron provide a ruggedness that can only be provided by castings havingsignificant elongation.
When open, the DX Valve’s reinforced elastomer sleeves seal against each other,providing a 100% full-port opening which minimizes turbulence and wear. In this openposition, the seats isolate and protect all metal parts of the valve from coming in contact with the process. When closed, the sleeves provide a drop-tight seal in both directions.
Each time the DX Valve strokes, it discharges a small amount of slurry, which keepsthe gate path and seat area clear of entrapped particulates. Unlike traditional knife gatevalves, the DX prevents slurry build-up in the seat area, which might otherwise prohibitthe valve’s ability close. Both the slurry sleeves and gates are field-replaceable.
A wiper blade mounted on top of the valve prevents the gate lubricant and process from leaking through the top. The DX Valve’s innovative design eliminates the need for traditional packing. This wiper blade also prevents external grit from entering the valve body. To control slurry discharging from slot in the valve, a plate style splash guard is utilized. Optional systems to pipe or flush slurry away are also available.
KNIFE GATE VALVESFor Handling Tough Slurries
Series DX
Ductile Iron BodyAvailable Sizes 3” - 30”
Abrasion-Resistant Slurry Sleeves are Field Replaceable and Provide Bi-Directional, Drop-Tight Shutoff
100% Full Port Design
Heavy-Duty 316 Stainless Steel Gate
Wiper Blade Eliminates Need for Packing
Open/Close Lock-Out Feature (Optional)
Robust Corrosion-Resistant Ductile Iron Yoke
Slotted Flange Holes for Easy Through-Bolt Installation
Grease Fittings for Gate and Stem Lubrication
Series DX
Materials of Construction►Ductile iron body standard 3”- 30”►Fabricated steel body 26” and larger►Available sleeve materials: Pure Gum Rubber, EPDM or BUNA-N, other materials available on request ►Standard gate material: 316L SS ►Optional gate materials: 17-4PH, 317L, 904L, duplex, alloy 20 and C-276►Optional proprietary gate coatings: PTFE, PFA and FEP►Optional splash guard and pipe-away containment
Retaining rings are optional in valve sizes 3” - 8” and standard in sizes 10” and larger.36”, 42” and 48” available upon request.
Valve Size
Length F to FHeightClosed
C
HeightOpen
H
Max Operating Pressure
316 SS Gate (psi)
Max Operating Pressure
17-4 PH Gate (psi)
Weight (lbs)
Without Retaining Flanges
With Retainig Flanges
3” 5.875” 6.875” 17.13” 20.38” 100 150 494” 5.875” 6.875” 18.25” 22.63” 100 150 666” 6” 7” 21.06” 27.18” 100 150 1098” 6.25” 7025” 26.56” 34.50” 100 150 173
10” --- 8.875” 32.44” 43.63” 100 150 22212” --- 10.125” 37” 50.88” 100 150 34014” --- 10.125” 43.63” 57.63” 100 150 49516” --- 11” 47.5” 63” 100 150 63518” --- 12.125” 52.53” 70” 100 150 89520” --- 14.125” 57.94” 74.13” 100 150 106024” --- 14.625” 66.68” 86.94 100 150 225030” --- 15.75” 88.63” 120.63” 75 150 2388
Valve SizeD
Length F to F
WidthA
HeightB
HeightClosed
H1
Height Open
H
Height PneumaticActuated
Gate Thickness
Max Working Pressure (psi)Gate Material
316 SS 17-4 pH3” 2.25” 8” 3.875” 17.125” 20.375” 27.5” .25” 150 1504” 2.25” 9.25” 4.75” 18.25” 22.625” 29.5” .25” 150 1506” 2.375” 11.5” 5.875” 21.0625” 27.1875” 33.5” .5” 150 1508” 2.875” 14” 7” 26.5625” 34.5625” 38.625” .5” 150 150
10” 3.125” 16.75” 8.375” 32.4375” 43.625” 49.875” .5” 150 15012” 3.25” 20.125” 10.0625” 37” 50.875” 55” .5” 100 15014” 3.25” 21.5” 11” 43.625” 57.625” 59” .5625” 100 15016” 3.75” 24” 12.5” 47.5” 63” 63” .675” 100 15018” 3.75” 25.75” 13.25” 52.625” 70” 83.75” .75” 100 15020” 4.625” 27.5” 13.75” 57.9375” 74.125” • .875” 100 15024” 4.75” 32.5” 16” 66.6875” 86.9375” • 1” 100 15030” 5” 38.75” 19” 88.625” 120.625” • 1.125” 75 12536” 5.125” 46” 23” 96” 134.875” • 1.25” 75 12542” 5.125” 53” 26.5” 100” 137.25” • 1.25” 50 75
® KNIFE GATE VALVESFor Handling Tough Slurries
Ductile Iron, Cast Iron or Fabricated Steel Body
Series D Flexgate
100% Full-Port Design
Dependable, Maintenance-Free
Design With Replaceable Slurry Sleeve
Heavy-Duty Top Works
Flush Port Allows for a Controlled and Safer Work Environment
Bi-Directional, Drop-Tight Shutoff
Stainless Steel Gate
Inverted Packing BoxTFE Available
Series D Flexgate ManualRed Valve’s Series D Flexgate Valves are built with a cast or fabricated body and feature heavy-duty stainless steel gate. Ductile iron cast bodies provide enhanced performance where external and internal factors demand materials providing significant elongation. Removable rubber cartridge seats on either side of the gate provide a bi-directional seal and excellent wear resistance. The seats are metal-reinforced and available in a wide variety of elastomers for abrasion resistance and chemical compatibility. A port at thebase of the valve allows for flushing.
The Flexgate Valve provides a bi-directional shutoff. A heavy-duty topworks is standard, and the relatively simple design eliminates expensive overhauls, unscheduled shutdowns and costly replacement parts – the only replacement parts are the slurry seats and packing.
Red Valve Flexgate Valves of 3” - 12” are provided with standard handwheel mechanisms featuring cast iron handwheels, machined 303 stainless steel stems with yoke sleeves and thrust washers designed to reduce operating torque. Flexgate Valves 14” and larger feature fabricated (tubular) handwheels. It is recommended that manual Flexgate Valves 12” and larger be specified with a 4:1 bevel gear actuator to reduce rim pull. Pneumatic and electric operators are available.
Series D Flexgate Manual
Materials of Construction►Ductile Iron body 3” - 12”; cast iron body 14” - 30”; fabricated steel body 36” - 42”►Standard sleeve materials: Pure Gum Rubber or EPDM, other materials available on request►Standard gate: ASTM A240 T–316►Optional gate: 17-4 pH, Hastelloy C or teflon-coated 316 SS
H
B
A
D
H1
F to F
*Consult factory.18” and smaller - installed length is .12” less than minimum F to F.20” and larger - installed length is .25” less than minimum F to F.48” and larger - consult factory.
® KNIFE GATE VALVESFor Handling Tough Slurries
Valve Size
Working Pressure Plant Air(psi)25 psi 50 psi 75 psi 100 psi 125 psi 150 psi
3” - 4” RD-6RD-6
RD-6RD-6
RD-6RD-6
RD-6RD-6
RD-6RD-6
RD-6RD-6
6080
6” RD-6RD-6
RD-6RD-6
RD-6RD-6
RD-6RD-6
RD-6RD-6
RD-6RD-6
6080
8” RD-6RD-6
RD-6RD-6
RD-6RD-6
RD-6RD-6
RD-6RD-6
RD-8RD-6
6080
10” RD-6RD-6
RD-6RD-6
RD-8RD-6
RD-8RD-6
RD-8RD-8
RD-10RD-8
6080
12” RD-6RD-6
RD-8RD-6
RD-8RD-8
RD-8RD-8
RD-10RD-8
RD-10RD-10
6080
14” RD-6RD-6
RD-8RD-6
RD-8RD-8
RD-10RD-8
RD-10RD-10
RD-12RD-10
6080
16” RD-6RD-6
RD-8RD-8
RD-10RD-8
RD-10RD-10
RD-12RD-10
RD-12RD-12
6080
18” RD-8RD-6
RD-10RD-8
RD-10RD-10
RD-12RD-10
RD-14RD-12
RD-14RD-12
6080
Series D Flexgate ActuatedRed Valve’s Series D Flexgate Valves are available with pneumatic, electric or hydraulic actuators. Other options include limit switches, solenoids and air regulators.
The actuated Flexgate provides long-term abrasion resistance under high-cycle conditions. The valve self-cleans each time it is cycled and is ideal for automated operations.
Red Valve manufactures its pneumatic actuators using Black Amalgon, a fiberglass-reinforced epoxy resin. The actuator material is inert to most corrosive chemicals, hydraulic fluids, water and oil. It has an operating temperature range from -90°F to 225°F and can withstand maximum working pressures of 250 psi. Inside actuator walls are polished and impregnated with molydisulfide for reduced friction and wear. The piston seal is a long lasting O-ring. The piston rod is sealed with a lip seal, which is protected by a rod wiper ring. This wiper ring prevents dirt from being dragged through the seal.
Series D Flexgate Pneumatic
C
B
A
D
F to F
Electric Actuators recommended for valve sizes 20” - 72”. Consult factory for dimensions.
Materials of Construction►Ductile Iron body 3” - 12”; cast iron body 14” - 30”; fabricated steel body 36” - 42”►Standard sleeve materials: Pure Gum Rubber or EPDM, other materials available on request►Standard gate: ASTM A240 T–316►Optional gate: 17-4 pH, Hastelloy C or teflon-coated 316 SS
Red Valve Slurry Knife Gate Valves are designed for on/off service. A heavy-duty, stainless steel gate passes through two cartridge-reinforced rubber slurry sleeves. These special elastomer slurry sleeves provide compression interference fit resulting in a droptight seal. When the valve is in the open position, the full port eliminates flow obstructions, keeping abrasive wear to a minimum.
Principle of Operation
Closing Action
Open Closing Closed
The topworks, including the gate, require very little maintenance. The only replacement parts are the cartridge slurry sleeves and packing. The valve’s unique design allows the slurry sleeves to be replaced easily, with no valve disassembly required. The valve is simply unbolted from the line, removing the old seats, and inserting the new slurry sleeves. The packing material is contained in a unique “inverted” packing box that simplifies replacement. The valve can remain inline while the topworks gate and packing box are removed. This innovative design eliminates the need to dig old packing from deep within the valve body.
Maintenance Ease
AccessoriesFloorstands are available with bevel gears, electric actuators and handwheels. Standard length is 36 inches to centerline of handwheel. Recommended for valves with long extensions to relieve stem loading.
Special Paints and Coatings are included in Red Valve’s Quality Control Process, such as epoxy and tar coating.
Atmospheric and Pressure-Containing Bonnets can be be supplied to protect the topworks of the valve.
Pneumatic Actuators use an Amalgon cylinder that is strong and lightweight.
Aluminum end plates and a stainless steel piston rod ensure reliable performance.
Four-way solenoid valves can be mounted and piped at the factory, making the valve complete and ready for installation.
Standard Bevel Gear Actuators have a gear ratio of 4:1. Other gear ratios are 8:1, 12:1, 16:1 and 24:1.
Limit Switches, when specified, are yoke-mounted to provide remote indication of valve position. Standard switches are 100 volt, NEMA 4 rated. Other types and options are available.
© 2018 Red Valve CompanyAll rights reserved.
www.redvalve.com
600 N. Bell AvenueCarnegie, PA 15106
PHONE:412/279-0044
FAX:412/279-7878
®
“Rely on Red” for a Total System Solution to YourMining ChallengesNo other company can match Red Valve’s “Total System Solution” for cost-effective, reliable valves in the mining industry.
Since its inception in 1953, Red Valve has been the world’s leading manufacturer of valves for mining applications. Today, Red Valve products are used in every type of mining operation worldwide. A pioneer and innovator of valves and equipment to solve the toughest mining challenges, Red Valve has enhanced the efficiency of the mining industry by introducing a wide variety of low-maintenance, cost-effective flow control products and solutions.
Contact us today for a free copy of our Valve Selection Guide for the Mining Industry.
top related