lc-32g2m/x/h lc-37g2m/x/h 1st edition service manual
Post on 11-Dec-2021
11 Views
Preview:
TRANSCRIPT
LC-32G2M/X/HLC-37G2M/X/H
SERVICE MANUAL
LCD COLOR TELEVISION
MODELS
LC-32G2M/X/HLC-37G2M/X/H
In the interests of user-safety (Required by safety regulations in some countries) the set should be restoredto its original condition and only parts identical to those specified should be used.
SHARP CORPORATIONThis document has been published to be used forafter sales service only.The contents are subject to change without notice.
CONTENTSPage
» LIST OF CHANGED PARTS ...........................................................................................................................2» IMPORTANT SERVICE SAFETY PRECAUTION ........................................................................................4» SPECIFICATIONS........................................................................................................................................7» OPERATION MANUAL ................................................................................................................................8» DIMENSIONS ............................................................................................................................................14» REMOVING OF MAJOR PARTS................................................................................................................16» PARTS LIST ...............................................................................................................................................24» PACKING OF THE SET .............................................................................................................................34
OUTLINE
This model is based on the LC-32/37G1M/X/H and is equipped with a redesigned speaker. This ServiceManual covers the modifications alone. For the other points, refer to the LC-32/37G1M/X/H Service Manual.
SY3M2LC30HV6U
1st Edition
LC-32G2M/X/H
LC-37G2M/X/H
2
LC-32G2M/X/HLC-37G2M/X/H
LIST OF CHANGED PARTS
(LC-32G2M/X/H)Ref.No. Description LC-32G1M/X/H LC-32G2M/X/H Note
PWB ASSEMBLIES
LCD CONTROL Unit DUNTKC268VJ46 (M) DUNTKC268VJ49 (M)
DUNTKC268VJ47 (X) DUNTKC268VJ50 (X)
DUNTKC268VJ48 (H) DUNTKC268VJ51 (H)
TMDS RX Unit DKEYHC269VJ28 (M) DKEYHC269VJ25 (M)
DKEYHC269VJ29 (X) DKEYHC269VJ26 (X)
DKEYHC269VJ30 (H) DKEYHC269VJ27 (H)
KEY Unit DUNTKC274UJ04 (M) No parts changed
DUNTKC274UJ05 (X) No parts changed
DUNTKC274UJ06 (H) No parts changed
R/C LED Unit DUNTKC275UJ04 (M) No parts changed
DUNTKC275UJ05 (X) No parts changed
DUNTKC275UJ06 (H) No parts changed
MOTOR SP Unit DUNTKC276UJ04 (M) No parts changed
DUNTKC276UJ05 (X) No parts changed
DUNTKC276UJ06 (H) No parts changed
POWER SUPPLY Unit RDENCA081WJZZ (M) No parts changed
RDENCA059WJZZ (X) (H) No parts changed
INVERTER-A Unit RUNTKA069WJZZ (M) (X) (H) No parts changed
INVERTER-B Unit RUNTKA070WJZZ (M) (X) (H) No parts changed
INVERTER-A GND Unit RUNTKA071WJZZ (M) (X) (H) No parts changed
INVERTER-B GND Unit RUNTKA072WJZZ (M) (X) (H) No parts changed
LCD PANEL
32” Wide LCD Panel Unit RLCDTA028WJZZ
LCD CONTROL Unit
R2026 Metal Oxide VRS-CY1JF223JY New Parts
R2029 Metal Oxide VRS-CY1JF223JY Delete
MOTOR SP Unit
CABINET AND MECHANICAL PARTS
Please refer to a Parts list.
PACKING PARTS AND ACCESSORIES
Please refer to a Parts list.
3
LC-32G2M/X/HLC-37G2M/X/H
LIST OF CHANGED PARTS
(LC-37G2M/X/H)Ref.No. Description LC-37G1M/X/H LC-37G2M/X/H Note
PWB ASSEMBLIES
LCD CONTROL Unit DUNTKC268VJ53 (M) DUNTKC268VJ56 (M)
DUNTKC268VJ54 (X) DUNTKC268VJ57 (X)
DUNTKC268VJ55 (H) DUNTKC268VJ58 (H)
TMDS RX Unit DKEYHC269VJ34 (M) DKEYHC269VJ31 (M)
DKEYHC269VJ35 (X) DKEYHC269VJ32 (X)
DKEYHC269VJ36 (H) DKEYHC269VJ33 (H)
KEY Unit DUNTKC274UJ04 (M) No parts changed
DUNTKC274UJ05 (X) No parts changed
DUNTKC274UJ06 (H) No parts changed
R/C LED Unit DUNTKC275UJ04 (M) No parts changed
DUNTKC275UJ05 (X) No parts changed
DUNTKC275UJ06 (H) No parts changed
MOTOR SP Unit DUNTKC276UJ04 (M) No parts changed
DUNTKC276UJ05 (X) No parts changed
DUNTKC276UJ06 (H) No parts changed
POWER SUPPLY Unit RDENCA081WJZZ (M) No parts changed
RDENCA059WJZZ (X) (H) No parts changed
INVERTER-A Unit RUNTKA080WJZZ (M) (X) (H) No parts changed
INVERTER-B Unit RUNTKA081WJZZ (M) (X) (H) No parts changed
INVERTER-A GND Unit RUNTKA082WJZZ (M) (X) (H) No parts changed
INVERTER-B GND Unit RUNTKA083WJZZ (M) (X) (H) No parts changed
LCD PANEL
37” Wide LCD Panel Unit RLCDTA027WJZZ
LCD CONTROL Unit
R2026 Metal Oxide VRS-CY1JF223JY New Parts
R2029 Metal Oxide VRS-CY1JF223JY Delete
MOTOR SP Unit
CABINET AND MECHANICAL PARTS
Please refer to a Parts list.
PACKING PARTS AND ACCESSORIES
Please refer to a Parts list.
4
LC-32G2M/X/HLC-37G2M/X/H
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
SAFETY NOTICE
Many electrical and mechanical parts in Liquid Crystalco lor te lev is ion have spec ia l safety- re la tedcharacteristics.These characteristics are often not evident from visualinspection, nor can protection afforded by them benecessarily increased by using replacement componentsrated for higher voltage, wattage, etc.Replacement parts which have these special safetycharacteristics are identified in this manual; electrical
components having such features are identified by “ å”and shaded areas in the Replacement Parts List andSchematic Diagrams.For continued protection, replacement parts must beidentical to those used in the original circuit.The use of a substitute replacement parts which do nothave the same safety characteristics as the factoryrecommended replacement parts shown in this servicemanual, may create shock, fire or other hazards.
WARNING
1. For continued safety, no modification of any circuitshould be attempted.
2. Disconnect AC power before servicing.
BEFORE RETURNING THE RECEIVER(Fire & Shock Hazard)
Before returning the receiver to the user, performthe following safety checks:
1. Inspect all lead dress to make certain that leads arenot pinched, and check that hardware is not lodgedbetween the chassis and other metal parts in thereceiver.
2. Inspect all protective devices such as non-metalliccontrol knobs, insulation materials, cabinet backs,adjustment and compartment covers or shields,isolation resistor-capacitor networks, mechanicalinsulators, etc.
3. To be sure that no shock hazard exists, check forleakage current in the following manner.
» Plug the AC cord directly into a 110~240 volt AC outlet.» Using two clip leads, connect a 1.5k ohm, 10 watt
resistor paralleled by a 0.15µF capacitor in serieswith all exposed metal cabinet parts and a knownearth ground, such as electrical conduit or electricalground connected to an earth ground.
» Use an AC voltmeter having with 5000 ohm per volt,or higher, sensitivity or measure the AC voltage dropacross the resistor.
» Connect the resistor connection to all exposed metalparts having a return to the chassis (antenna, metalcabinet, screw heads, knobs and control shafts,escutcheon, etc.) and measure the AC voltage dropacross the resistor.All checks must be repeated with the AC cord plugconnection reversed. (If necessary, a nonpolarizedadaptor plug must be used only for the purpose ofcompleting these checks.)Any reading of 0.75V rms (this corresponds to 0.5mA rms AC.) or more is excessive and indicates apotential shock hazard which must be correctedbefore returning the monitor to the owner.
IMPORTANT SERVICE SAFETY PRECAUTIONË Service work should be performed only by qualified service technicians who are thor-
oughly familiar with all safety checks and the servicing guidelines which follow:
CAUTION: FOR CONTINUEDPROTECTION AGAINST A RISK OFFIRE REPLACE ONLY WITH SAMETYPE FUSE.F701 (3.15A, 250V), F702 (3.15A,250V), F703 (2A, 250V), F705 (1A,DC450V), F706 (5A, 250V), F707 (5A,250V)
A V
DVMAC SCALE
1.5k ohm10W
TO EXPOSEDMETAL PARTS
CONNECT TOKNOWN EARTHGROUND
0.15 FTEST PROBE
6
LC-32G2M/X/HLC-37G2M/X/H
Precautions for using lead-free solder1 Employing lead-free solder
"PWBs" of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on thePWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder.Example:
2 Using lead-free wire solderWhen fixing the PWB soldered with the lead-free solder, apply lead-free wire solder. Repairing with conventionallead wire solder may cause damage or accident due to cracks.As the melting point of lead-free solder (Sn-Ag-Cu) is higher than the lead wire solder by 40°C, we recommendyou to use a dedicated soldering bit, if you are not familiar with how to obtain lead-free wire solder or soldering bit,contact our service station or service branch in your area.
3 SolderingAs the melting point of lead-free solder (Sn-Ag-Cu) is about 220°C which is higher than the conventional leadsolder by 40°C, and as it has poor solder wettability, you may be apt to keep the soldering bit in contact with thePWB for extended period of time. However, since the land may be peeled off or the maximum heat-resistancetemperature of parts may be exceeded, remove the bit from the PWB as soon as you confirm the steady solderingcondition.Lead-free solder contains more tin, and the end of the soldering bit may be easily corroded. Make sure to turn onand off the power of the bit as required.If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit afterevery use of it.When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper.
Be careful when replacing parts with polarity indication on the PWB silk.
Indicates lead-free solder of tin, silver and copper.
Lead-free wire solder for servicingPart No, Description Code
ZHNDAi123250E J φ0.3mm 250g(1roll) BLZHNDAi126500E J φ0.6mm 500g(1roll) BKZHNDAi12801KE J φ1.0mm 1kg(1roll) BM
L F a
7
LC-32G2M/X/HLC-37G2M/X/H
SPECIFICATIONS
Specifications are subject to change without prior notice.
×
× × × × × ××
×××
××
×
×××
×
×
Item32" LCD COLOUR TV, Model:LC-32G2M/X/H
Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TVFunction
PAL: B/G, D/K, I, PAL-60 SECAM: B/G, D/K, K/K1 NTSC: MTV-Standard (CCIR)
LCD panel 32" Advanced Super View & BLACK TFT LCD
Number of dots 3,147,264 dots (1366 768 3 dots)
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes forproduct improvement without prior notice. The performance specification figures indicated are nominal values of productionunits. There may be some deviations from these values in individual units.
VHF/UHF 44.25-863.25 MHz
CATV Hyper-band, S1–S41ch
TV-Tuning System Auto Preset 99 ch, Auto Label, Auto Sort
STEREO/BILINGUAL NICAM/A2
ReceivingChannel
Brightness 450 cd/m2
Viewing angles H : 170° V : 170°
Audio amplifier 10W 2
Speakers Ø 8 cm 2pcs, Ø 2.5 cm 2pcs
Terminals
AV in, COMPONENT VIDEO in
INPUT 2
INPUT 3
INPUT 4 AV in, S-VIDEO in
Rear
INPUT 1
Front
AVCSystem
AV OUTPUT RCA pin (AV output [Audio: Variable/Fixed])
DC OUTPUT DC9V 7W MAX
UHF/VHF 75 Din type
AV in, S-VIDEO in
ANTENNA IN
SPEAKER-B External speaker output terminal (L and R)
INPUT 5 Ø 3.5 mm jack (Audio input), DVI-I (DVI-I input)
OSD language English/Chinese/Arabic
Power Requirement AC 110–240 V, 50 Hz
PowerConsumption
36 W (0.6 W Standby)
Weight 6.6 kg (w/o stand), 6.8 kg (with stand)
Accessories Operation manual, Remote control unit ( 1), Systemcable ( 1), AC cord ( 2), “AAA” size battery ( 2),AVC system stand unit ( 1), Cable clamp ( 1),Antenna cable ( 1)
Headphones Ø 3.5mm jack (Audio output)
AVC System
Display
AVC System
Display
117 W (0.3 W Standby) (Method IEC60107)
13 kg (Display only), 17.5 kg (with Display andspeakers), 22 kg (with Display, speakers and stand)
PC Card slot PC Card Type II (PC Card Adapter)
CENTRECHANNELINPUT
RCA pin
RS-232C D-sub 9pin male connector
157 W (0.3 W Standby) (Method IEC60107)
14.5 kg (Display only), 19.5 kg (with Display andspeakers), 24 kg (with Display, speakers and stand)
37" LCD COLOUR TV, Model:LC-37G2M/X/H
37" Advanced Super View & BLACK TFT LCD
AV in, COMPONENT VIDEO in
Operation manual, Remote control unit ( 1), Systemcable ( 1), AC cord ( 2), “AAA” size battery ( 2),AVC system stand unit ( 1), Cable clamp ( 1),Antenna cable ( 1), Speaker unit ( 1), Bracket unit( 1), Screwdriver ( 1)
Ω
8
LC-32G2M/X/HLC-37G2M/X/H
OPERATION MANUALP
art n
ames
Dis
pla
y
PO
WE
R in
dic
ator
MA
IN P
OW
ER
but
ton
OP
C s
enso
r*
PO
WE
R b
utto
n
TV/V
IDE
Ob
utto
nV
OLU
ME
but
tons
(VO
L /
)
CH
AN
NE
L b
utto
ns(C
H/
)
Rem
ote
cont
rol s
enso
r
//
/
12
7 9 1083 4 5 12
1915 16 17 18 20 21 22
1311
23 24
1426 2725
6
NO
TE•
Whe
n us
ing
the
rem
ote
cont
rol u
nit,
poi
nt it
at t
he D
isp
lay.
Rem
ote
co
ntr
ol u
nit
1P
OW
ER
(S
TAN
DB
Y/O
N)
To s
witc
h th
e p
ower
on
and
off.
2O
PC
To s
witc
h th
e O
ptic
al P
ictu
r e C
ontr
ol o
n an
d o
ff.3
P&
PS
et th
e d
ual p
ictu
r e m
ode.
Pre
ss P
&P
ag
ain
to re
turn
to n
orm
al v
iew
.
SE
LE
CT
To s
elec
t eith
er s
cree
n to
be
activ
e in
Dua
l scr
een
mod
e.4
FR
EE
ZE
TV/E
xter
nal i
nput
mod
e: C
hang
e th
e st
ill im
age
mod
e.TE
LETE
XT
mod
e: F
r eez
e a
mul
ti-p
age
on s
cree
n w
hile
oth
er p
ages
are
auto
mat
ical
ly u
pd
ated
. P
ress
FR
EE
ZE
ag
ain
to r
etur
n to
the
norm
al im
age.
5W
IDE
TV/E
xter
nal i
nput
mod
e: C
hang
e th
e w
ide
imag
e m
ode.
TELE
TEX
T m
ode:
Set
the
area
of m
agni
ficat
ion.
(ful
l/up
per
hal
f/low
erha
lf)6
CA
RD
Sw
itch
to th
e ca
rd m
ode.
Car
d m
ode:
Pre
ss t
o tu
rn t
he C
ard
Con
trol
Pan
el o
n an
d o
ff.
(R
EC
/RE
C S
TOP
)S
ti ll i
mag
e: P
ress
to
cap
ture
a s
ti ll i
mag
e to
a c
ard
afte
r fr
eezi
ng t
heim
age
from
TV
or
exte
rnal
eq
uip
men
t.M
otio
n p
ictu
re: P
ress
to s
tart
/sto
p re
cord
ing
a m
otio
n p
ictu
re to
a c
ard
from
TV
or
exte
rnal
eq
uip
men
t.7
0 –
9TV
/Ext
erna
l inp
ut m
ode:
Set
the
chan
nel.
TELE
TEX
T m
ode:
Set
the
pag
e.8
(F
lash
bac
k)P
ress
to r
etur
n to
the
pre
viou
s im
age
in n
orm
al v
iew
ing
mod
e.
9 (
SU
BT
ITL
E f
or T
EL
ET
EX
T)
TV/E
xter
nal i
nput
mod
e: T
o tu
rn t
he s
ubtit
les
on a
nd o
ff.
10 (
Rev
eal h
idd
en f
or T
EL
ET
EX
T)
TELE
TEX
T m
ode:
Dis
pla
y hi
dd
en c
hara
cter
s.11
MP
XS
elec
t the
sou
nd m
ultip
lex
mod
e.12
VO
L/V
OL
Set
the
volu
me.
13 (
MU
TE
)M
ute
the
soun
d.
14E
XIT
Turn
off
the
On
Scr
een
Dis
pla
y.15
SL
EE
PS
et th
e S
leep
tim
er.
16D
ISP
LA
YD
isp
lay
the
pro
gra
mm
e in
form
atio
n.17
AV
MO
DE
Sel
ect a
vid
eo s
ettin
g: A
V M
OD
E (S
TAN
DA
RD
, MO
VIE
, GA
ME
, US
ER
,D
YN
AM
IC),
PC
MO
DE
(S
TAN
DA
RD
, US
ER
)18
3D–Y
/CTo
sw
itch
the
3D Y
/C fu
nctio
n on
and
off.
19 (
Dig
it f
or
chan
nel
sel
ect)
Cha
nge
the
dig
its o
f the
sel
ecte
d T
V c
hann
el.
20 (
TE
LE
TE
XT
)S
elec
t the
TE
LETE
XT
mod
e. (
all T
V im
age,
all
TEX
T im
age,
TV
/TE
XT
imag
e)21
(TO
P O
verv
iew
fo
r TE
LE
TE
XT
)T
EL
ET
EX
T m
od
e:
Dis
pla
y a
n i
nd
ex
pa
ge
fo
r C
EE
FAX
/FL
OF
info
rmat
ion.
TO
P O
verv
iew
for
TOP
pro
gra
mm
e.22
CH
/CH
TV in
put
mod
e: S
elec
t the
cha
nnel
.TE
LETE
XT
mod
e: S
elec
t the
pag
e.23
TV
/VID
EO
(IN
PU
T S
OU
RC
E)
Sel
ect
an in
put
sou
rce.
(TV
, IN
PU
T 1,
IN
PU
T 2,
IN
PU
T 3,
IN
PU
T 4,
INP
UT
5, C
AR
D)
24M
EN
UD
isp
lay
the
men
u sc
reen
.25
(C
urs
or)
Sel
ect a
des
ired
item
on
the
setti
ng s
cree
n.E
NT
ER
Exe
cute
a c
omm
and
.26
RE
TU
RN
ME
NU
mod
e: R
etur
n to
the
pre
viou
s m
enu
scre
en.
27C
olo
ur
(RE
D/G
RE
EN
/YE
LL
OW
/BL
UE
)TE
LETE
XT
mod
e: S
elec
t a p
age.
9
LC-32G2M/X/HLC-37G2M/X/H
Pre
par
atio
n
Att
ach
ing
sp
eake
rs
1 2 3
65
4
7 8
Pee
l off
the
tap
e ho
ldin
g th
e en
ds
of th
e ca
ble
s,an
d m
ove
cab
les
tow
ard
s b
ehin
d th
e d
isp
lay.
Turn
the
spea
ker
to th
e fro
nt o
f the
Dis
pla
y(d
irect
ion
of th
e ar
row
) an
d fi
t it t
o th
e sc
rew
hol
e.
Fast
en th
e sc
rew
s.
Hoo
k th
e h
ole
of th
e sp
eake
r to
the
scre
w o
f the
Dis
pla
y.
Fast
en th
e sp
eake
r ca
ble
with
the
hold
er.
•C
onne
ct th
e en
ds
of th
e ca
ble
s to
the
spea
ker
term
inal
s as
sho
wn
in th
e i l l
ustr
atio
n.
Alig
n th
e nu
b o
f the
bra
cket
into
the
gro
ove
and
fast
en it
.
Fast
en th
e b
rack
et w
ith th
e sc
r ew
.
Fix
the
spea
ker
term
inal
cov
er.
LC
-37G
2M
NO
TE
•P
erfo
rm th
e sa
me
step
s fo
r rig
ht s
pea
ker .
•To
rem
ove
the
spea
kers
, per
form
the
step
s in
rev
erse
ord
er.
Wh
ere
to p
lace
th
e S
yste
m
“Sys
tem
” m
eans
the
Dis
pla
y an
d A
VC
Sys
tem
. Firs
t sel
ect t
he lo
catio
n w
here
to p
lace
the
Sys
tem
.
1 2
Sel
ecti
ng
th
e lo
cati
on
of
the
Sys
tem
•S
elec
t a p
lace
with
no
dire
ct s
unlig
ht a
nd g
ood
ven
tilat
ion.
•Th
e D
isp
lay
and
the
AVC
Sys
tem
are
con
nect
ed b
y th
e sy
stem
cab
le.
Set
tin
g t
he
Sys
tem
in p
lace
Han
dlin
g t
he
Dis
pla
y
CAU
TIO
N
•W
hen
usi
ng
th
e T
V w
ith
th
e su
pp
lied
sta
nd
att
ach
ed, d
o n
ot
rem
ove
the
spea
ker.
Do
ing
so
may
dis
turb
th
e b
alan
cele
adin
g t
o p
rod
uct
dam
age
or
per
son
al in
jury
.•
Do
not r
emov
e th
e st
and
and
sp
eake
r fro
m th
e D
isp
lay
unle
ssus
ing
an
optio
nal b
rack
et to
mou
nt it
.•
Kee
p e
noug
h sp
ace
abov
e an
d b
ehin
d th
e D
isp
lay.
•Th
e TV
wei
ghs
ab
out 2
2 kg
(LC
-32G
2M)
and
24
kg (
LC-3
7G2M
).M
ove
it w
ith tw
o or
mor
e p
eop
le.
•W
hen
you
mov
e th
e D
isp
lay,
hol
d th
e p
ortio
n of
the
Dis
pla
y, n
otth
e sp
eake
r.
Han
dlin
g t
he
AV
C S
yste
m
CAU
TIO
N
•D
o no
t put
a V
CR
or
othe
r d
evic
e on
the
AVC
Sys
tem
.•
Kee
p e
noug
h sp
ace
abov
e an
d o
n th
e si
des
of t
he A
VC
Sys
tem
.•
Do
not b
lock
the
vent
ilatio
n op
enin
gs
on th
e to
p a
nd le
ft si
de,
and
the
exha
ust f
an o
n th
e rig
ht s
ide.
•D
o no
t sp
read
a th
ick
clot
h b
enea
th th
e AV
C S
yste
m, o
r co
ver
itw
ith o
ne, a
s th
is c
an c
ause
ove
rhea
ting
and
resu
lt in
mal
func
tion.
Sys
tem
cab
le
Dis
pla
yA
VC
Sys
tem
If yo
u w
ant t
o ke
ep a
long
er d
ista
nce
bet
wee
n th
eD
isp
lay
and
AV
C S
yste
m, p
leas
e p
urch
ase
the
optio
nal s
yste
m c
able
AN
-07S
C2
(ab
out
7 m
eter
s).
CAU
TIO
N
Ad
just
th
e sc
reen
wit
h b
oth
han
ds.
Pu
t o
ne
han
d o
n t
he
Dis
pla
y an
d t
ilt t
he
scre
enw
hile
ste
adyi
ng
th
e st
and
wit
h y
ou
r o
ther
han
d.
You
can
ad
just
the
scr
een
vert
ical
ly u
p t
o 2
deg
rees
forw
ard
or
6 d
egre
es b
ack-
war
d,
or r
otat
e 10
deg
rees
horiz
onta
lly.
10 c
mor
mor
e
5 cm
or
mor
e5
cm o
r mor
eon
bot
h si
des
Kee
p e
noug
h sp
ace
Ther
e is
an
exha
ust f
anon
the
right
sid
e.
10
LC-32G2M/X/HLC-37G2M/X/H
Pre
par
atio
n
Sys
tem
cab
le
AV
C S
yste
m (
rear
vie
w)
AC
cor
d
Dis
pla
y (r
ear
view
)
AC
cor
d
Sys
tem
cab
le(G
RE
Y)
Con
nect
the
plu
g fi
rmly
until
the
hook
s on
bot
hsi
des
clic
k.
(WH
ITE
)C
onne
ct th
e p
lug
into
the
term
inal
and
sec
ure
it b
ytig
hten
ing
the
thum
b s
crew
s.
Set
tin
g t
he
Sys
tem
Afte
r p
uttin
g th
e D
isp
lay
and
the
AVC
Sys
tem
in p
lace
, con
nect
the
syst
em c
able
s an
d A
C c
ord
s. U
se th
eca
ble
cla
mp
s fo
r b
und
ling
the
cab
les.
Pre
ss d
ow
n t
he
two
up
per
ho
oks
to
rem
ove
the
cove
r to
war
d y
ou
.
Co
nn
ecti
ng
th
e sy
stem
cab
le a
nd
th
e A
C c
ord
to
th
e D
isp
lay
1 2 3
Rem
ovi
ng
th
e te
rmin
al c
over
Co
nn
ecti
ng
th
e sy
stem
cab
le a
nd
th
e A
C c
ord
to
th
e A
VC
Sys
tem
CAU
TIO
N
•TO
PR
EV
EN
T R
ISK
OF
EL
EC
TR
IC S
HO
CK
, DO
NO
T T
OU
CH
UN
-IN
SU
LA
TE
D P
AR
TS
OF
AN
Y C
AB
LE
S W
ITH
TH
EA
C C
OR
D C
ON
NE
CT
ED
.
Pre
ss t
he
two
ho
oks
tow
ard
th
e ce
ntr
e o
f th
eD
isp
lay
and
rem
ove
the
cove
r to
war
d y
ou
.
(GR
EY
)
(WH
ITE
)
(BLA
CK
)
(BLA
CK
)
* C
he
ck
the
alig
nm
en
t o
f th
ete
rmin
als
bef
ore
inse
rtin
g.
4 5
Att
ach
ing
th
e cl
amp
an
d b
un
dlin
g t
he
cab
les
wit
h t
he
clam
p
Clo
sin
g t
he
term
inal
cov
er
Cab
le c
lam
p
Inse
rt th
e ca
ble
clam
p in
the
hole
on th
e D
isp
lay
assh
own.
Dis
pla
y (r
ear
view
)
Cab
les
com
eo
ut
fro
m t
he
smal
l op
enin
g.
11
LC-32G2M/X/HLC-37G2M/X/H
Pre
par
atio
n
Rem
ovin
g s
pea
kers
1 2 3
54L
C-3
2G2M
NO
TE
•P
erfo
rm th
e sa
me
step
s fo
r rig
ht s
pea
ker .
•To
atta
ch th
e sp
eake
rs, p
erfo
rm th
e st
eps
in re
vers
e or
der
.
Unf
aste
n th
e sc
rew
use
d to
sec
ure
the
spea
ker
bra
cket
.Ta
ke o
ff th
e sp
eake
r ca
ble
cov
er.
Take
off
the
spea
ker
term
inal
cov
er.
Unf
aste
n th
e sc
rew
s.
Dis
conn
ect t
he c
able
from
the
spea
ker
.
CAU
TIO
N
•D
o no
t rem
ove
the
stan
d a
nd s
pea
ker
from
the
Dis
pla
y un
less
usi
ng a
n op
tiona
l bra
cket
to m
ount
it.
Rem
ovin
g t
he
stan
d
Bef
ore
det
achi
ng (
or a
ttach
ing
) st
and
, un
plu
g t
he A
C c
ord
fro
m t
he A
C in
put
and
the
sys
tem
cab
le f
r om
the
Dis
pla
y.
CAU
TIO
N
•D
o n
ot
rem
ove
th
e st
and
fro
m t
he
Dis
pla
y u
nle
ss u
sin
g a
n o
pti
on
al w
all m
ou
nt
bra
cket
to
mo
un
t it
.
Bef
ore
att
ach
ing
/det
ach
ing
sta
nd
•B
efor
e p
erfo
rmin
g w
ork
mak
e su
re to
turn
off
the
Sys
tem
.•
Bef
ore
per
form
ing
wor
k sp
read
cus
hion
ing
ove
r th
e b
ase
area
to la
y th
e D
isp
lay
on. T
his
will
pre
vent
it fr
omb
eing
dam
aged
.
NO
TE•
To a
ttach
the
stan
d, p
erfo
rm th
e ab
ove
step
s in
rev
erse
ord
er.2 D
etac
h th
e st
and
from
the
Dis
pla
y.
(Hol
d th
e st
and
so
it w
ill n
ot d
rop
from
the
edg
e of
the
bas
e ar
ea.)
1 Unf
aste
n th
e fo
ur s
crew
s us
ed t
o se
cure
the
stan
d in
pla
ce.
Set
tin
g t
he
Dis
pla
y o
n t
he
wal
l
CAU
TIO
N
•In
stal
ling
th
e L
iqu
id C
ryst
al T
elev
isio
n r
equ
ires
sp
ecia
l sk
ill t
hat
sh
ou
ld o
nly
be
per
form
ed b
y q
ual
ifie
d s
ervi
cep
erso
nn
el. C
ust
om
ers
sho
uld
no
t att
emp
t to
do
the
wo
rk th
emse
lves
. SH
AR
P b
ears
no
res
po
nsi
bili
ty fo
r im
pro
per
mo
un
tin
g o
r m
ou
nti
ng
th
at r
esu
lts
in a
ccid
ent
or
inju
ry.
Usi
ng
an
op
tio
nal
bra
cket
to
mo
un
t th
e D
isp
lay
•Yo
u ca
n as
k a
qua
lifie
d s
ervi
ce p
erso
nnel
ab
out u
sing
an
optio
nal A
N-3
7AG
2 b
rack
et to
mou
nt th
e D
isp
lay
to th
e w
all.
•C
aref
ully
rea
d th
e in
stru
ctio
ns th
at c
ome
with
the
bra
cket
bef
ore
beg
inni
ng w
ork.
Ver
tical
mou
ntin
gA
ngul
ar m
ount
ing
Ab
ou
t se
ttin
g t
he
Dis
pla
y an
gle
LC
-37G
2M•
You
can
set t
he D
ispl
ay o
n th
e w
all
up to
5 d
egre
es fo
r war
d w
hen
the
spea
kers
are
atta
ched
and
up
to 2
0de
gree
s fo
r war
d w
hen
the
spea
kers
are
not
atta
ched
. Do
not
set t
he a
ngle
out
side
thos
e ra
nges
.
LC
-32G
2M•
You
can
set t
he D
ispl
ay o
n th
e w
all
up to
15
degr
ees
for
war
d w
hen
the
spea
kers
are
atta
ched
and
up
to 2
0de
gree
s fo
rwar
d w
hen
the
spea
kers
are
not
atta
ched
. Do
not
set t
he a
ngle
out
side
thos
e ra
nges
.
CAU
TIO
N
•D
o no
t rem
ove
the
stan
d a
nd s
pea
ker
from
the
Dis
pla
y un
less
usi
ng a
n op
tiona
l bra
cket
to m
ount
it.
Han
gin
g o
n t
he
wal
lA
N-3
7AG
2 w
all m
ount
bra
cket
. 32/
37 in
ch d
ual p
urp
ose
bra
cket
s. (
See
the
bra
cket
inst
ruct
ions
for
det
ails
.)
12
LC-32G2M/X/HLC-37G2M/X/H
Ap
pen
dix
+
RS
-232
C p
ort
sp
ecif
icat
ion
s
Ret
urn
cod
eC
omm
and
4-d
igits
Par
amet
er 4
-dig
its
PC
Co
ntr
ol o
f th
e S
yste
m•
Whe
n a
pro
gra
m is
set
, the
dis
pla
y ca
n b
e co
ntro
lled
from
the
PC
usi
ng th
e R
S-2
32C
term
inal
.Th
e in
put
sig
nal (
PC
/vid
eo) c
an b
e se
lect
ed, t
he v
olum
e ca
n b
e ad
just
ed a
nd v
ario
us o
ther
ad
just
men
ts a
ndse
tting
s ca
n b
e m
ade,
ena
blin
g a
utom
atic
pro
gra
mm
ed p
layi
ng.
• A
ttach
an
RS
-232
C c
able
cr o
ss-t
ype
(com
mer
cial
ly a
vaila
ble
) to
the
sup
plie
d D
in/D
-sub
RS
-232
C f
or t
heco
nnec
tions
.
NO
TE
• Th
is o
per
atio
n sy
stem
sho
uld
be
used
by
a p
erso
n w
ho is
acc
usto
med
to u
sing
PC
s.
Co
mm
un
icat
ion
co
nd
itio
ns
Set
the
RS
-232
C c
omm
unic
atio
ns s
ettin
gs
on t
he P
C t
o m
atch
the
dis
pla
y’s
com
mun
icat
ions
con
diti
ons.
The
dis
pla
y's
com
mun
icat
ions
set
ting
s ar
e as
follo
ws:
Bau
d r
ate:
Par
ity
bit
: D
ata
len
gth
:
Sto
p b
it:
Flo
w c
on
tro
l:
9,60
0 b
ps
8 b
itsN
one
1 b
itN
one
Co
mm
and
fo
rmat
Co
mm
un
icat
ion
pro
ced
ure
Sen
d th
e co
ntro
l com
man
ds
from
the
PC
via
the
RS
-232
C c
onne
ctor
.Th
e D
isp
lay
oper
ates
acc
ord
ing
to th
e re
ceiv
ed c
omm
and
and
sen
ds
a re
spon
se m
essa
ge
to th
e P
C.
Do
not s
end
mul
tiple
com
man
ds
at th
e sa
me
time.
Wai
t unt
il th
e P
C re
ceiv
es th
e O
K r
esp
onse
bef
ore
send
ing
the
next
com
man
d.
Eig
ht A
SC
II co
des
C
R
Com
man
d 4-
digi
ts: C
omm
and.
The
text
of f
our c
hara
cter
s.Pa
ram
eter
4-d
igits
: Par
amet
er 0
– 9
, spa
ce, ?
Par
amet
er
Inp
ut th
e p
aram
eter
val
ues,
alig
ning
left,
and
fill
with
sp
ace
(s)
for
the
rem
aind
er. (
Be
sure
that
four
val
ues
are
inp
ut fo
rth
e p
aram
eter
.)W
hen
the
inp
ut p
aram
eter
is n
ot w
ithin
an
adju
stab
le r
ang
e, “
ER
R”
r etu
rns.
(R
efer
to “
Res
pon
se c
ode
form
at”.
)
Whe
n “?
” is
inp
ut fo
r so
me
com
man
ds,
the
pre
sent
set
ting
val
ue r
esp
ond
s.
C1
C2
C3
C4
P1
P2
P3
P4
00
55
10
0
—3
0
00
09
0 ??
??
?
Co
mm
and
s
P I I I I D C C I I I I I I I I I I I I I I I I A A A A A A V
PO
WE
R O
FF (
STA
ND
BY
)
INP
UT
SW
ITC
HIN
G (
TOG
GLE
)
TV (
CH
AN
NE
L FI
XE
D)
INP
UT1
– 5
(1
– 5)
CA
RD
TV D
IRE
CT
CH
AN
NE
L (1
– 9
9)
CH
AN
NE
L U
P
CH
AN
NE
L D
OW
N
INP
UT1
(A
UTO
)
INP
UT1
(C
OM
PO
NE
NT)
INP
UT1
(V
IDE
O)
INP
UT2
(A
UTO
)
INP
UT2
(S
-VID
EO
)
INP
UT2
(V
IDE
O)
INP
UT3
(A
UTO
)
INP
UT3
(C
OM
PO
NE
NT)
INP
UT3
(V
IDE
O)
INP
UT4
(A
UTO
)
INP
UT4
(S
-VID
EO
)
INP
UT4
(V
IDE
O)
PC
DIG
ITA
L
PC
AN
ALO
GU
E
AV
DIG
ITA
L
AV
AN
ALO
GU
E
TOG
GLE
STA
ND
AR
D
MO
VIE
GA
ME
US
ER
DY
NA
MIC
VO
LUM
E (
0 –
60)
PO
WE
R S
ETT
ING
INP
UT
SE
LEC
TIO
N A
CH
AN
NE
L
INP
UT
SE
LEC
TIO
N B
AV
MO
DE
SE
LEC
TIO
N
VO
LUM
E
O T T A C C H H N N N N N N N N N N N N N N N N V V V V V V O
W G V V R C U D P P P P P P P P P P P P P P P P M M M M M M L
R D D D D H P W 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 5 D D D D D D M
0 _ _ * _ * _ _ 0 1 2 0 1 2 0 1 2 0 1 2 0 1 2 3 0 1 2 3 4 5 *
_ _ _ _ _ * _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ *
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
CO
NTR
OL
ITE
MC
OM
MA
ND
PA
RA
ME
TER
CO
NTR
OL
CO
NTE
NTS
H H V V C P W W W W W W W W W W W M M M A A A T T A O O O O O O T T D
H-P
OS
ITIO
N (
AV
) (
10 –
10
)
H-P
OS
ITIO
N (
PC
) (0
– 1
80)
V-P
OS
ITIO
N (
AV
) (
20 –
20
)
V-P
OS
ITIO
N (
PC
) (0
– 1
00)
CLO
CK
(0
– 18
0)
PH
AS
E (
0 –
40)
TOG
GLE
(A
V)
NO
RM
AL
(AV
)
ZO
OM
14:
9 (A
V)
PA
NO
RA
MA
(A
V)
FULL
(A
V)
CIN
EM
A 1
6:9
(AV
)
CIN
EM
A 1
4:9
(AV
)
NO
RM
AL
(PC
)
CIN
EM
A (
PC
)
FULL
(P
C)
DO
T B
Y D
OT
(PC
)
TOG
GLE
MU
TE
MU
TE O
FF
TOG
GLE
ON
OFF
DU
AL
SC
RE
EN
OFF
DU
AL
SC
RE
EN
ON
TOG
GLE
OFF
SLE
EP
TIM
ER
30
MIN
SLE
EP
TIM
ER
1 H
OU
R
SLE
EP
TIM
ER
1 H
OU
R 3
0 M
IN
SLE
EP
TIM
ER
2 H
OU
R
SLE
EP
TIM
ER
2 H
OU
R 3
0 M
IN
TEX
T O
FF
TEX
T O
N (
TOG
GLE
)
DIR
EC
T P
AG
E J
UM
P (
100
– 89
9)
WID
E M
OD
E
PO
SIT
ION
DO
LBY
VIR
TUA
L
MU
TE
DU
AL
SC
RE
EN
AU
DIO
CH
AN
GE
SLE
EP
TIM
ER
TEX
T
P P P P L H I I I I I I I I I I I U U U C C C W W C F F F F F F E E C
O O O O C S D D D D D D D D D D D T T T D D D I I H T T T T T T X X P
S S S S K E E E E E E E E E E E E E E E V V V N N A M M M M M M T T G
* * * * * * 0 1 2 3 4 5 6 7 8 9 1 0 1 2 0 1 2 0 1 _ 0 1 2 3 4 5 0 1 *
* * * * * * _ _ _ _ _ _ _ _ _ _ 0 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ *
* * * * * * _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ *
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
CO
NTR
OL
ITE
MC
OM
MA
ND
PA
RA
ME
TER
CO
NTR
OL
CO
NTE
NTS
NO
TE
•If
an u
nder
bar
(_)
ap
pea
rs in
the
par
amet
er c
olum
n, e
nter
a s
pac
e.•
If an
ast
eris
k (*
) ap
pea
rs, e
nter
a v
alue
in th
e ra
nge
ind
icat
ed in
bra
cket
s un
der
CO
NTR
OL
CO
NTE
NTS
.
Ret
urn
cod
e (0
DH
)
Res
po
nse
co
de
form
at
Nor
mal
res
pon
se
Pro
ble
m r
esp
onse
(co
mm
unic
atio
n er
ror
or in
corr
ect c
omm
and
)
Ret
urn
cod
e (0
DH
)
OK
ER
R
13
LC-32G2M/X/HLC-37G2M/X/H
Bas
ic a
dju
stm
ent s
ettin
gs
TV
/AV
inp
ut
mo
de
men
u it
ems
List
of T
V/AV
men
u ite
ms
to h
elp
you
with
ope
ratio
ns
OP
CB
ackl
igh
tC
on
tras
tB
rig
htn
ess
Co
lou
rT
int
Sh
arp
nes
sA
dva
nce
dC
.M.S
.C
olo
ur T
emp
Bla
ck3D
-Y/C
Mo
no
chro
me
Film
Mo
de
I/P S
etti
ng
Pic
ture
No
Sig
nal
Off
No
Op
erat
ion
Off
Au
to In
stal
lati
on
Pro
gra
mm
e S
etu
pC
hild
Lo
ckIn
pu
t L
abel
Sp
eake
r S
etu
pP
osi
tio
nW
SS
4:3
Mo
de
Ro
tate
Lan
gu
age
Text
Lan
gu
age
Treb
leB
ass
Bal
ance
Do
lby
Vir
tual
Au
dio
On
lyD
NR
Inp
ut
Sel
ect
Au
dio
Ou
tQ
uic
k S
ho
ot
Co
lou
r S
yste
mC
entr
e C
han
nel
Inp
ut
Aud
io
Powe
r Con
trol
Set
up
Opt
ion
PC
inp
ut
mo
de
men
u it
ems
List
of P
C m
enu
item
s to
hel
p yo
u w
ith o
pera
tions
OP
CB
ackl
igh
tC
on
tras
tB
rig
htn
ess
Red
Gre
enB
lue
Ad
van
ced
C.M
.S.
Pic
ture
Po
wer
Man
agem
ent
Inp
ut
Lab
elS
pea
ker
Set
up
Inp
ut
Sig
nal
Au
to S
ync.
Fin
e S
ync.
Ro
tate
Lan
gu
age
Aud
io
Powe
r Con
trol
Set
up
Treb
leB
ass
Bal
ance
Do
lby
Vir
tual
Opt
ion
Au
dio
On
lyIn
pu
t S
elec
tA
ud
io O
ut
Qu
ick
Sh
oo
tC
entr
e C
han
nel
Inp
ut
14
LC-32G2M/X/HLC-37G2M/X/H
DIMENSIONS (LC-32G2M/X/H)
307
89.4
70.
5
671
307
980
566
480
700.4
395.
1
328
795
200
200
110
Unit: mm
15
LC-32G2M/X/HLC-37G2M/X/H
DIMENSIONS (LC-37G2M/X/H)Unit: mm
307
89.4
70.
5
671
307
635
548
822.6
463.
8
362
200
200
115
1102
917
16
LC-32G2M/X/HLC-37G2M/X/H
REMOVING OF MAJOR PARTSË Ë Ë Ë Ë LC-32G2M/X/H
1. Remove the Terminal Covers 12 .
2. Remove the SP Terminal Rubber Covers 3 and detach the SP Wires.
3. Remove 2 screws for fixing the SP Bracket Cover 4 and detach the SP Bracket Covers.
4. Remove 6 screws for fixing the Speaker 5 and detach the Speakers.
5. Remove 4 screws for fixing the Stand 6and detach the Stand.
6. Remove the SP Wire Covers.
7. Remove 20 screws for fixing the cabinet (7: 13 pcs., 8: 2 pcs., 9: 3 pcs., 0: 2 pcs.), and detach the Cabinet B.
5
9
6
101
7
9
6
2
8
5
3
3
4
4
Terminal Cover (Top)
Terminal Cover (Bottom)Stand
SP Bracket Cover
SP Bracket Cover
SP Terminal Cover
SP Terminal Cover SP Wire
SP WireSP Wire Cover
SP Wire Cover
Cabinet B
Speaker (left)
Cabinet A
Speaker (right)
17
LC-32G2M/X/HLC-37G2M/X/H
8. Remove 7 screws for fixing shield cover q and detach the Shield cover and Wire Holder.
9. Remove 2 screws for fixing the top control cover ass'y w.
10. Remove 2 FPC connecting the LCD panel and LCD controller unit.
11. Remove 16 connectors e from the lamps.
12. Remove 4 screws for fixing the Speaker Angle r.
13. Remove 5 screws for fixing the TMDS PWB t.
11
12
Top Control Cover Ass’y Shield Cover
Wire Holder
FPC
13 13
15
1414
TMDS PWB
18
LC-32G2M/X/HLC-37G2M/X/H
14. Remove the screw for fixing the LCD controller PWB y to detach the LCD controller PWB.
15. Remove 6 screws for fixing the Power Supply PWB u to detach the Power Supply PWB.
16. Remove 2 screws for fixing the R/C LED PWB i to detach the R/C LED PWB.
17. Remove 4 screws for fixing the Inverter A PWB o to detach the inverter A PWB.
18. Remove 4 screws for fixing the Inverter B PWB p to detach the inverter B PWB.
19. Remove 3 screws for fixing the Inverter GND-A PWB a to detach the inverter GND-A PWB.
20. Remove 3 screws for fixing the Inverter GND-B PWB s to detach the inverter GND-B PWB.
21. Remove 4 EXT SP terminal unit fixing screws d to detach the EXT SP terminal unit.
22. Remove 2 screws for fixing the Fan f to detach the Fan.
23. Remove 4 screws for fixing the Chassis g to detach the Backlight Chassis from the Cabinet A.
InverterGND-A PWB
InverterGND-B PWB
Inverter-B PWB
Fan
LCD CONT PWB
Power Supply PWB
SP Terminal PWBR/C,LED PWB
Inverter-A PWB
Fan
Backlight Chassis
Remove the connector.23
20
18
22
21
24 24 19
2525
16
2525
17
19
LC-32G2M/X/HLC-37G2M/X/H
24. Remove 5 screws for fixing the LCD Panel Unit h to detach the LCD Panel Unit.
25. Remove 14 screws for fixing the sheet angle (j: 8 pcs., k: 6 pcs.), to detach the sheet angle.
26. Remove the Reflection/Polarization Sheet, Prism Sheet, Diffusion Sheet, and Diffusion Board.
27. Remove 6 screws for fixing the Lamp Holder (upper) l to detach the Lamp Holder (upper).
26
27
28
27
29
29
28
LCD Panel Unit
Reflection/Polarization Sheet(PSHEPA167WJZZ)
Diffusion Board(PCOVUA027WJZZ)
Diffusion Sheet(PSHEPA169WJZZ)
Sheet Angle (Left)(CANGKA222WJ01)
Sheet Angle (Right)(CANGKA222WJ01)
Sheet Angle (Top)(CANGKA221WJ01)
Prism Sheet(PSHEPA168WJZZ)
Lamp Holder (Top)(LHLDZA310WJKZ)
Lamp(KLMP-A027WJZZ)
Lamp Holder (Top)(LHLDZA310WJKZ)
Lamp Holder (Bottom)(LHLDZA309WJK0)
Backlight Chassis
Lamp Holder (Bottom)(LHLDZA309WJK0)
20
LC-32G2M/X/HLC-37G2M/X/H
Ë Ë Ë Ë Ë LC-37G2M/X/H
1. Remove the Terminal Covers 12 .
2. Remove the SP Terminal Rubber Covers 3 and detach the SP Wires.
3. Remove 2 screws for fixing the SP Bracket Cover 4 and detach the SP Bracket Covers.
4. Remove 4 screws for fixing the Speaker 5 and detach the Speakers.
5. Remove 4 screws for fixing the Stand 6and detach the Stand.
6. Remove the SP Wire Covers.
7. Remove 20 screws for fixing the cabinet (7: 13 pcs., 8: 2 pcs., 9: 3 pcs., 0: 2 pcs.), and detach the Cabinet B.
5
9
6
101
7
9
6
2
8
5
3
3
4
4
Terminal Cover (Top)
Terminal Cover (Bottom)Stand
SP Bracket Cover
SP Bracket Cover
SP Terminal Cover
SP Terminal Cover SP Wire
SP WireSP Wire Cover
SP Wire Cover
Cabinet B
Speaker (left)
Cabinet A
Speaker (right)
21
LC-32G2M/X/HLC-37G2M/X/H
8. Remove 8 screws for fixing shield cover q and detach the Shield cover and Wire Holder.
9. Remove 2 screws for fixing the top control cover ass'y w.
10. Remove 2 FPC connecting the LCD panel and LCD controller unit.
11. Remove 18 connectors e from the lamps.
12. Remove 4 screws for fixing the Speaker Angle r.
13. Remove 5 screws for fixing the TMDS PWB t.
11
12
Top Control Cover Ass’y Shield Cover
FPC
13 13
15
1414
TMDS PWB
22
LC-32G2M/X/HLC-37G2M/X/H
14. Remove the screw for fixing the LCD controller PWB y to detach the LCD controller PWB.
15. Remove 6 screws for fixing the Power Supply PWB u to detach the Power Supply PWB.
16. Remove 2 screws for fixing the R/C LED PWB i to detach the R/C LED PWB.
17. Remove 4 screws for fixing the Inverter A PWB o to detach the inverter A PWB.
18. Remove 4 screws for fixing the Inverter B PWB p to detach the inverter B PWB.
19. Remove 4 screws for fixing the Inverter GND-A PWB a to detach the inverter GND-A PWB.
20. Remove 4 screws for fixing the Inverter GND-B PWB s to detach the inverter GND-B PWB.
21. Remove 4 EXT SP terminal unit fixing screws d to detach the EXT SP terminal unit.
22. Remove 2 screws for fixing the Fan f to detach the Fan.
23. Remove 4 screws for fixing the Chassis g to detach the Backlight Chassis from the Cabinet A.
InverterGND-A PWB
InverterGND-B PWB
Inverter-B PWB
Fan
LCD CONT PWB
Power Supply PWB
SP Terminal PWB
R/C,LED PWB
Inverter-A PWB
Fan
Backlight Chassis
Remove the connector.23
20
18
22
21
24 24 19
2525
16
2525
17
23
LC-32G2M/X/HLC-37G2M/X/H
24. Remove 5 screws for fixing the LCD Panel Unit h to detach the LCD Panel Unit.
25. Remove 14 screws for fixing the sheet angle (j: 8 pcs., k: 6 pcs.), to detach the sheet angle.
26. Remove the Reflection/Polarization Sheet, Prism Sheet, Diffusion Sheet, and Diffusion Board.
27. Remove 6 screws for fixing the Lamp Holder (upper) l to detach the Lamp Holder (upper).
26
27
28
27
29
29
28
LCD Panel Unit
Reflection/Polarization Sheet(PSHEPA238WJZZ)
Diffusion Board(PCOVUA028WJZZ)
Diffusion Sheet(PSHEPA172WJZZ)
Sheet Angle (Left)(CANGKA220WJ01)
Sheet Angle (Right)(CANGKA220WJ01)
Sheet Angle (Top)(CANGKA219WJ01)
Prism Sheet(PSHEPA171WJZZ)
Lamp Holder (Top)(LHLDZA308WJKZ)
Lamp(KLMP-A041WJZZ)
Lamp Holder (Top)(LHLDZA308WJKZ)
Lamp Holder (Bottom)(LHLDZA307WJK0)
Backlight Chassis
Lamp Holder (Bottom)(LHLDZA307WJK0)
24
LC-32G2M/X/HLC-37G2M/X/H
Ref. No. Part No. Description Code Ref. No. Part No. Description Code
PARTS LISTPARTS REPLACEMENT
Replacement parts which have these special safety characteristicsidentified in this manual; electrical components having such featuresare identified by å and shaded areas in the Replacement Parts Listsand Schematic Diagrams. The use of a substitute replacement partwhich dose no have the same safety characteristic as the factoryrecommended replacement parts shown in this service manual maycreate shock, fire or other hazards.
"HOW TO ORDER REPLACEMENT PARTS"To have your order filled promptly and correctly, please furnish thefollowing informations.
1. MODEL NUMBER 2. REF. NO.
3. PART NO. 4. DESCRIPTION
in USA: Contact your nearest SHARP Parts Distributor to order.For location of SHARP Parts Distributor, Please call Toll-Free; 1-800-BE-SHARP
MARK: SPARE PARTS-DELIVERY SECTION
LISTE DES PIECESCHANGE DES PIECES
Les pi`eces de rechange qui pr élelesentent ces caract éleristiquessp éleciales de s élecurit éle, sont identifi élees dans ce manuel :lespi`eces élelectriques qui pr élesentent ces particularit éles, sontrep éler élee par la marque ået sont hachur élees dans les listes depi`eces et dans les diagrammes sch élematiques.La substitution d'une pi`ece de rechange par une autre qui ne préLesente pas les m éoemes caract éLeristiques de s élecurit éle quela pi`ece recommand élee parl'usine et dans ce manuel de service,peut provoquer une éLelectrocution, un incendie ou toutautre sinistre.
"COMMENT COMMANDER LES PIECES DERECHANGE"
Pour que votre commande soit rapidement et correctement remplie,veuillez fournir les renseignements suivants.
1. NUMERO DU MODELE 2. NO. DE REF
3. NO. DE PIECE 4. DESCRIPTION
in CANADA: Contact SHARP Electronics of Canada LimitedPhone (416) 890-2100
PRINTED WIRING BOARD ASSEMBLIES(NOT REPLACEMENT ITEM)
LC-32G2M/X/HDUNTKC268VJ49 – LCD CONTROL Unit —
(LC-32G2M)DUNTKC268VJ50 – LCD CONTROL Unit —
(LC-32G2X)DUNTKC268VJ51 – LCD CONTROL Unit —
(LC-32G2H)DKEYHC269VJ25 – TMDS Unit (LC-32G2M) —DKEYHC269VJ26 – TMDS Unit (LC-32G2X) —DKEYHC269VJ27 – TMDS Unit (LC-32G2H) —DUNTKC274UJ04 – KEY Unit (LC-32G2M) —DUNTKC274UJ05 – KEY Unit (LC-32G2X) —DUNTKC274UJ06 – KEY Unit (LC-32G2H) —DUNTKC275UJ04 – R/C LED Unit (LC-32G2M) —DUNTKC275UJ05 – R/C LED Unit (LC-32G2X) —DUNTKC275UJ06 – R/C LED Unit (LC-32G2H) —DUNTKC276UJ04 – EXT-SP Unit (LC-32G2M) —DUNTKC276UJ05 – EXT-SP Unit (LC-32G2X) —DUNTKC276UJ06 – EXT-SP Unit (LC-32G2H) —RDENCA081WJZZ J POWER Unit (LC-32G2M)RDENCA059WJZZ J POWER Unit BZ
(LC-32G2X) (LC-32G2H)RUNTKA069WJZZ – INVERTER-A Unit —RUNTKA070WJZZ – INVERTER-B Unit —RUNTKA071WJZZ – INVERTER-A-GND Unit —RUNTKA072WJZZ – INVERTER-B-GND Unit —
LC-37G2M/X/HDUNTKC268VJ56 – LCD CONTROL Unit —
(LC-37G2M)DUNTKC268VJ57 – LCD CONTROL Unit —
(LC-37G2X)DUNTKC268VJ58 – LCD CONTROL Unit —
(LC-37G2H)DKEYHC269VJ31 – TMDS Unit (LC-37G2M) —DKEYHC269VJ32 – TMDS Unit (LC-37G2X) —DKEYHC269VJ33 – TMDS Unit (LC-37G2H) —DUNTKC274UJ04 – KEY Unit (LC-37G2M) —DUNTKC274UJ05 – KEY Unit (LC-37G2X) —DUNTKC274UJ06 – KEY Unit (LC-37G2H) —DUNTKC275UJ04 – R/C LED Unit (LC-37G2M) —DUNTKC275UJ05 – R/C LED Unit (LC-37G2X) —DUNTKC275UJ06 – R/C LED Unit (LC-37G2H) —DUNTKC276UJ04 – EXT-SP Unit (LC-37G2M) —DUNTKC276UJ05 – EXT-SP Unit (LC-37G2X) —DUNTKC276UJ06 – EXT-SP Unit (LC-37G2H) —RDENCA081WJZZ J POWER Unit (LC-37G2M)RDENCA059WJZZ J POWER Unit BZ
(LC-37G2X) (LC-37G2H)RUNTKA080WJZZ – INVERTER-A Unit —RUNTKA081WJZZ – INVERTER-B Unit —RUNTKA082WJZZ – INVERTER-A-GND Unit —RUNTKA083WJZZ – INVERTER-B-GND Unit —
25
Ref. No. Part No. Description Code Ref. No. Part No. Description Code
LC-32G2M/X/HLC-37G2M/X/H
5-5-1 LANGKA228WJZZ J Chassis Angle AZ5-5-2 LANGKA230WJFW Stand Angle5-5-3 LANGKA242WJFW J Fixing Metal, x2 AL5-5-4 LANGKA262WJFW J Fixing Metal AE5-5-5 Not Available – Chassis —5-5-6 LHLDWA029WJKZ J Wire Holder, x2 AC5-5-7 LHLDWA031WJKZ J Wire Holder, x6 AC5-5-8 LHLDWA039WJKZ J Wire Holder, x2 AD5-5-9 LHLDWA041WJKZ J Wire Holder AC5-5-10 LHLDWA046WJKZ J Wire Holder, x10 AC
(LC-32G2M) (LC-32G2H)5-5-10 LHLDWA046WJKZ J Wire Holder, x9 (LC-32G2X) AC5-5-11 LHLDZA316WJKZ J Lamp Clip, x8 AD5-5-12 LHLDZA346WJKZ J Mirror Clip, x16 AC5-5-13 LX-HZA023WJFN J Screw, x25-5-14 PCLiC1033CEZZ J Clip AC5-5-15 PMiR-A040WJZZ J Mirror BE5-5-16 PSPAGA187WJ00 J Spacer, x8 AB5-5-17 PSPAHA329WJZZ J Spacer, x2 AB5-5-18 PSPAHA330WJZZ J Spacer, x2 AB5-5-19 PSPAHA338WJZZ J Spacer, x2 AB
(LC-32G2M) (LC-32G2H)5-5-19 PSPAHA338WJZZ J Spacer, x4 (LC-32G2X) AB5-5-20 PSPAHA339WJZZ J Spacer, x2 AD5-5-21 PSPAKA043WJKZ J Spacer, x8 AB5-5-22 PSPAZA426WJZZ J Spacer AE5-5-23 PZETKA063WJZZ J Insulator AN5-5-24 TCAUZA031WJZZ J Caution Label AB5-5-25 XBBSN40P06000 J Screw, x25 AA5-5-26 XBBS940P08000 J Screw, x2 AB5-5-27 LHLDW1046CEZZ J Wire Holder, x3 (LC-32G2X) AA
5-6 KLMP-A027WJZZ J Lamp, x85-7 LHLDZA309WJK0 J Lamp Holder, x2 AL5-8 LHLDZA310WJKZ J Lamp Holder, x2 AM5-9 LX-BZA051WJFN J Screw, x5 AB5-10 PCOVUA027WJZZ J Diffusion Panel BG5-11 PSHEPA167WJZZ J Reflection/Deflection Sheet5-12 PSHEPA168WJZZ J Prism Sheet BN5-13 PSHEPA169WJZZ J Diffusion Sheet AW5-14 LX-BZA052WJFN J Screw, x4 AA5-15 XBBSN30P08000 J Screw, x6 AA5-16 XEBSN30P10000 J Screw, x6 AA5-17 XBPSN30P08JS0 J Screw, x14 AB5-18 LX-BZA074WJFN J Screw, x4 AB
6 CHLDZA330WJ04 J Bracket Ass’y (L) AV6-1 GLEGGA025WJZZ J Foot, x2 AB6-2 LANGKA258WJSA J Angle Frame AQ6-3 Not Available – Bracket —6-4 LHLDZA357WJKA J Holder AD6-5 PSPAZA384WJZZ J Spacer AD6-6 XEBS930P08000 J Screw, x2 AA
7 CHLDZA335WJ04 J Bracket Ass’y (R) AV7-1 GLEGGA025WJZZ J Foot, x2 AB7-2 LANGKA258WJSA J Angle Frame AQ7-3 Not Available – Bracket —7-4 LHLDZA357WJKA J Holder AD7-5 PSPAZA384WJZZ J Spacer AD7-6 XEBS930P08000 J Screw, x2 AA
8 Not Available – Speaker Ass’y (L) —8-1 CPNLSA020WJ01 J Speaker Panel Ass’y (L) BR8-2 RSP-ZA076WJN3 J Speaker (L)
9 Not Available – Speaker Ass’y (R) —9-1 CPNLSA020WJ03 J Speaker Panel Ass’y (R) BR9-2 RSP-ZA076WJN4 J Speaker (R)
10 XBBS940P06000 J Screw, x2 AB
11 DUNTKC268VJ49 – LCD CONTROL Unit —(LC-32G2M)
11 DUNTKC268VJ50 – LCD CONTROL Unit —(LC-32G2X)
1 CCABAA513WJ03 J Front Cabinet Ass’y1-1 Not Available – Front Cabinet —1-2 GCOVAA677WJSA J R/C LED Cover AF1-3 HBDGBA037WJSA J Badge, "SHARP" AM1-4 PSPAGA188WJZZ J Mask Spacer, x2 AA1-5 PSPAHA298WJZZ J Mask Spacer, x2 AC1-6 PSPAHA299WJZZ J Mask Spacer, x2 AC
2 CCABBA358WJ06 J Rear Cabinet Ass'y(LC-32G2M)
2 CCABBA447WJ01 J Rear Cabinet Ass'y(LC-32G2X)
2 CCABBA444WJ02 J Rear Cabinet Ass'y(LC-32G2H)
2-1 Not Available – Rear Cabinet —2-2 GCOVAA454WJKD J Hole Cover, x4 AC2-3 GCOVAA758WJKB J Hole Cover (L) AG2-4 GCOVAA759WJKB J Hole Cover (R) AG2-5 GCOVAA784WJKA J SP Cover AE2-6 HiNDP5733CESB J AQUOS Label AD2-7 HiNDPA754WJSA J Speaker Terminal Indicator AD2-8 HiNDPA786WJSA J Indicator AE2-9 HiNDPA834WJSA J Hole Cover Indicator AD2-10 HiNDPA988WJSA J Model Label
(LC-32G2M)2-10 HiNDPA989WJSA J Model Label
(LC-32G2X)2-10 HiNDPA990WJSA J Model Label
(LC-32G2H)2-11 LHLDWA043WJKZ J Holder AB2-12 LHLDWA044WJKZ J Holder AB2-13 LHLDWA048WJKZ J Holder AB2-14 LHLDZA349WJZZ J Holder, x2 AG2-15 PSPAGA172WJZZ J Spacer, x4 AA2-16 XEBS930P08000 J Screw, x2 AA2-17 XEBSN30P10000 J Screw, x8 AA
3 CCOVAA906WJ01 J Top Control Cover Ass’y AR3-1 Not Available – Top Control Cover —3-2 JBTN-A253WJKC J Control Button AH3-3 JBTN-A254WJKC J Power Button AG3-4 MSPRCA015WJFW J Power Button Spring AB3-5 XEBSN30P08000 J Screw, x2 AA
4 CDAi-A105WJ08 J Stand Ass’y4-1 Not Available – Stand Base —4-2 GDAi-A116WJSC J Stand, Support AZ4-3 GDAi-A117WJF8 J Swivel Base AP4-4 LANGKA218WJSA J Base Angle BF4-5 MHNG-A073WJSC J Hinge BK4-6 PSPAZA476WJZZ J Spacer, x4 AC4-7 PSPAZA477WJZZ J Spacer, x4 AD4-8 LX-NZA013WJFN J Nut AE4-9 XCSS940P25000 J Screw, x10 AB4-10 XEBS940P10000 J Screw, x12 AB
5 Not Available – 32 WIDE LCD PANEL Unit Ass’y —5-1 RLCDTA028WJZZ J 32 WIDE LCD PANEL Unit5-2 CANGKA221WJ01 J Sheet Angle Ass’y (Top), x25-2-1 Not Available – Sheet Angle, x2 —5-2-2 PSPAKA049WJKZ J Spacer, x2 AC
5-3 CANGKA222WJ01 J Sheet Angle Ass’y (Side), x2 —5-3-1 Not Available – Sheet Angle, x2 —5-3-2 PSPAKA042WJKZ J Spacer, x2 AC5-3-3 PSPAKA048WJKZ J Spacer, x2 AC
5-4 CANGKA241WJ01 J Sheet Angle Ass’y (Bottom), x25-4-1 Not Available – Sheet Angle, x2 —5-4-2 PSPAKA041WJKZ J Spacer, x2 AC
5-5 CCHSMA097WJ01 J Chassis Ass’y BZ
CABINET AND MECHANICAL PARTS(LC-32G2M/X/H)
26
Ref. No. Part No. Description Code Ref. No. Part No. Description Code
LC-32G2M/X/HLC-37G2M/X/H
CABINET AND MECHANICAL PARTS(LC-32G2M/X/H) (Continued)
11 DUNTKC268VJ51 – LCD CONTROL Unit —(LC-32G2H)
12 DKEYHC269VJ25 – TMDS Unit —(LC-32G2M)
12 DKEYHC269VJ26 – TMDS Unit —(LC-32G2X)
12 DKEYHC269VJ27 – TMDS Unit —(LC-32G2H)
13 DUNTKC274UJ04 – KEY Unit —(LC-32G2M)
13 DUNTKC274UJ05 – KEY Unit —(LC-32G2X)
13 DUNTKC274UJ06 – KEY Unit —(LC-32G2H)
14 DUNTKC275UJ04 – R/C LED Unit —(LC-32G2M)
14 DUNTKC275UJ05 – R/C LED Unit —(LC-32G2X)
14 DUNTKC275UJ06 – R/C LED Unit —(LC-32G2H)
15 DUNTKC276UJ04 – EXT-SP Unit —(LC-32G2M)
15 DUNTKC276UJ05 – EXT-SP Unit —(LC-32G2X)
15 DUNTKC276UJ06 – EXT-SP Unit —(LC-32G2H)
16 RDENCA081WJZZ J POWER Unit(LC-32G2M)
16 RDENCA059WJZZ J POWER Unit BZ(LC-32G2X) (LC-32G2H)
17 RUNTKA069WJZZ – INVERTER-A Unit —18 RUNTKA070WJZZ – INVERTER-B Unit —19 RUNTKA071WJZZ – INVERTER-A-GND Unit —20 RUNTKA072WJZZ – INVERTER-B-GND Unit —21 QPWBMC494WJPZ J FPC AM23 QCNW-C324WJN1 J Connecting Cord, For-SP Short (L) AL24 QCNW-C324WJN2 J Connecting Cord, For-SP Short (R) AL25 QCNW-C051WJQZ J Connecting Cord, [TC] AC26 QCNW-C052WJQZ J Connecting Cord, [LV] AC27 QCNW-C208WJQZ J Connecting Cord, [RM] AH28 QCNW-C209WJQZ J Connecting Cord, [KM] AE29 QCNW-C211WJQZ J Connecting Cord, [AC] AG
(LC-32G2M) (LC-32G2H)29 QCNW-C729WJQZ J Connecting Cord, [AC] AN
(LC-32G2X)30 QCNW-C212WJQZ J Connecting Cord, [IV] AK31 PSLDMA326WJ01 J Main Shield
(LC-32G2M) (LC-32G2H)31 PSLDMA326WJ02 J Main Shield AT
(LC-32G2X)32 PSPAZA458WJZZ J Spacer, x2 AD33 PSPAZA459WJZZ J Spacer, x2 AD34 GCOVAA683WJKA J Terminal Cover (Up) AM35 GCOVAA684WJKA J Terminal Cover (Down) AN36 LHLDZA331WJKA J Bracket Cover, x2 AK37 GCOVAA696WJKA J SP Wire Cover (L) AP38 GCOVAA697WJKA J SP Wire Cover (R) AP39 LANGKA293WJZZ J SP Fixing Metal, x2 AH40 LANGKA294WJZZ J SP Fixing Metal, x2 AH41 NFANR0126CEZZ J Fan, x2 AT42 LHLDW1046CEZZ J Wire Holder AA43 XBBS930P08000 J Screw, x2 AA44 XBBS940P10000 J Screw, x2 AB45 LX-BZA061WJ01 J Screw, x4 AH46 XBBSN50P12JS0 J Screw, x4 AF47 XBPSN30P04J00 J Screw, x2 AA48 XBPSN30P08JS0 J Screw, x38 AB49 XBPSN30P20XS0 J Screw, x4 AB50 XEBS930P10000 J Screw, x3 AA51 XBBS950P12000 J Screw, x4 AB52 XEBS940P20000 J Screw, x13 AB53 XEBSN30P06000 J Screw, x2 AA
54 XEBSN30P10000 J Screw, x8 AA55 LX-BZA042WJFN J Screw, x2 AB57 QCNW-C206WJQZ J Connecting Cord, [BL] AH58 QCNW-C207WJQZ J Connecting Cord, [GV] AG59 QCNW-C044WJQZ J Connecting Cord, [TV] AF60 QCNW-C210WJQZ J Connecting Cord, [PV] AF61 QCNW-C205WJQZ J Connecting Cord, [SO] AE62 PSLDMA327WJFW J TMDS Shield AM
(LC-32G2X)63 PSPAGA209WJZZ J Spacer, x2 AA
(LC-32G2X)64 PSPAGA210WJZZ J Spacer, x2 AB
(LC-32G2X)65 PSPAHA390WJZZ J Spacer, x3 AB
(LC-32G2X)
27
LC-32G2M/X/HLC-37G2M/X/H
CABINET AND MECHANICAL PARTS (LC-32G2M/X/H)
654321
A
B
C
D
E
F
G
H
4-5
46
4-2
4-3
4-1
4-8
4
1-5
1-5
1-6
1-3
1-7
1-1
1-2
1-4
1-6
1
54
54
14
2-1
2-17
2-8
22
2-18
2
2-11
2-6
2-9
2-16 2-1
8
2-15
2-7
2-12
43
50
50
2-14
11
3147
15
4848
33
33
5-16
5-14
5-3-2
5-5-11
5-8
5-14
5-14
5-16
5-3
5-3-2
5-8
5-15
5-15
5-6
5-7
5-7
5-3
5-2
49
41
5-1
5-9
5-11
5-12
5-13
5-10
A
A
B
B
B
H
H
I
J
G
L MK
F
F
3
13
3-1
53
3-3
3-4
3-2
ON
A
A
17 18
48
I
J
48
16
49
4841
G
P
Q
3-5
R
b
a
2-2
2-10
34
Ya a
U ON
US
Xe
V
W
f
R E
d
ZY
K
48
48
19
20
L M
b b
Q
T
Z
WV
X
4-4
4-7
4-6
4-9
4-6
4-10
S
T
e
f
5 5-5
E
12
28
25
21
26
21 27
29
30
4-9
5-3-1
5-3-3
5-4
5-4
5-4-1
5-4-2
5-2-1
5-2-1
5-2-2
5-4-2
5-4-1
5-3-1
5-2
2-13
44
2-16
48
52
35
P 42
5-2-2
5-3-3
32
57
59
60
58
61
48
54
23
24
37
38
2-18
2-4
2-18
2-3
8-1
8
6 6
7
7
51
4545
51
9
8-2
9-1
9-2
6-6
6-3
6-1
6-4
6-5
6-2 7-
3
7-5
7-2
7-6
7-4
7-1
g
h
h
g
55
55
k
m
36
36
k
m
1010
4039
3940
28
LC-32G2M/X/HLC-37G2M/X/H
654321
A
B
C
D
E
F
G
H
5-5-21
5-5-14
5-5-165-5-22
5-5-255-5
5-5-23
5-5-25
5-5-10
5-5-26
5-5-25
5-5-18
5-5-18
5-5-9
5-5-4
5-5-10
5-5-5
5-5-2
5-5-6
5-5-8
5-5-85-5-17
5-5-17
5-5-75-5-24
5-5-1
5-5-16
5-5-13
5-5-19
5-5-195-5-20
5-5-15
5-5-12
5-5-115-5-12
5-5-3
5-5-3
29
Ref. No. Part No. Description Code Ref. No. Part No. Description Code
LC-32G2M/X/HLC-37G2M/X/H
1 CCABAA512WJ03 J Front Cabinet Ass’y1-1 Not Available – Front Cabinet —1-2 GCOVAA677WJSA J R/C LED Cover AF1-3 HBDGBA036WJSA J Badge, "SHARP" AP1-4 PSPAGA188WJZZ J Mask Spacer, x2 AA1-5 PSPAHA296WJZZ J Mask Spacer, x2 AC1-6 PSPAHA297WJZZ J Mask Spacer, x2 AC
2 CCABBA357WJ07 J Rear Cabinet Ass'y(LC-37G2M)
2 CCABBA446WJ01 J Rear Cabinet Ass'y(LC-37G2X)
2 CCABBA443WJ02 J Rear Cabinet Ass'y(LC-37G2H)
2-1 Not Available – Rear Cabinet —2-2 GCOVAA454WJKD J Hole Cover, x4 AC2-3 GCOVAA756WJKB J Hole Cover (L) AG2-4 GCOVAA757WJKB J Hole Cover (R) AG2-5 GCOVAA784WJKA J SP Cover AE2-6 HiNDP5733CESB J AQUOS Label AD2-7 HiNDPA754WJSA J Speaker Terminal Indicator AD2-8 HiNDPA786WJSA J Indicator AE2-9 HiNDPA834WJSA J Hole Cover Indicator AD2-10 HiNDPA972WJSB J Indicator2-11 HiNDPB075WJSA J Model Label
(LC-37G2M)2-11 HiNDPB076WJSA J Model Label AG
(LC-37G2X)2-11 HiNDPB074WJSA J Model Label
(LC-37G2H)2-12 LHLDWA043WJKZ J Holder AB2-13 LHLDWA044WJKZ J Holder AB2-14 LHLDWA048WJKZ J Holder AB2-15 LHLDZA349WJZZ J Holder, x2 AG2-16 PSPAGA172WJZZ J Spacer, x4 AA2-17 XEBS930P08000 J Screw, x2 AA2-18 XEBSN30P10000 J Screw, x8 AA2-19 LX-BZA062WJF9 J Screw, x2 AF2-20 PZETKA097WJKZ J Insulator
(LC-37G2X)
3 CCOVAA906WJ01 J Top Control Cover Ass’y AR3-1 Not Available – Top Control Cover —3-2 JBTN-A253WJKC J Control Button AH3-3 JBTN-A254WJKC J Power Button AG3-4 MSPRCA015WJFW J Power Button Spring AB3-5 XEBSN30P08000 J Screw, x2 AA
4 CDAi-A105WJ07 J Stand Ass’y4-1 Not Available – Stand Base —4-2 GDAi-A116WJSC J Stand, Support AZ4-3 GDAi-A117WJF8 J Swivel Base AP4-4 LANGKA218WJSA J Base Angle BF4-5 MHNG-A072WJSC J Hinge BL4-6 PSPAZA476WJZZ J Spacer, x4 AC4-7 PSPAZA477WJZZ J Spacer, x4 AD4-8 LX-NZA013WJFN J Nut AE4-9 XCSS940P25000 J Screw, x10 AB4-10 XEBS940P10000 J Screw, x12 AB
5 Not Available – 37 WIDE LCD PANEL Unit Ass’y —5-1 RLCDTA027WJZZ J 37 WIDE LCD PANEL Unit5-2 CANGKA219WJ01 J Sheet Angle Ass’y (Width), x25-2-1 Not Available – Sheet Angle —5-2-2 PSPAZA465WJKZ J Spacer, x2 AD
5-3 CANGKA220WJ01 J Sheet Angle Ass’y (Length), x2 —5-3-1 Not Available – Sheet Angle —5-3-2 PSPAKA038WJKZ J Spacer, x2 AC5-3-3 PSPAZA469WJKZ J Spacer, x2 AC
5-4 CANGKA239WJ01 J Sheet Angle Ass’y, x2
5-4-1 Not Available – Sheet Angle —5-4-2 PSPAKA039WJKZ J Spacer, x2 AC
5-5 CCHSMA096WJ01 J Chassis Ass’y CE5-5-1 LANGKA227WJZZ J Chassis Angle BB5-5-2 LANGKA229WJFW Stand Angle5-5-3 LANGKA243WJFW J Fixing Metal BC5-5-4 LANGKA244WJFW J Fixing Metal BB5-5-5 LANGKA245WJFW J Fixing Metal, x2 AS5-5-6 LANGKA262WJFW J Shield Angle AE5-5-7 LCHSMA096WJZZ J Chassis BQ5-5-8 LHLDWA029WJKZ J Wire Holder, x2 AC5-5-9 LHLDWA031WJKZ J Wire Holder, x6 AC5-5-10 LHLDWA039WJKZ J Wire Holder, x2 AD5-5-11 LHLDWA041WJKZ J Wire Holder AC5-5-12 LHLDWA046WJKZ J Wire Holder, x13 AC5-5-13 LHLDZA315WJKZ J Lamp Clip, x9 AD5-5-14 LHLDZA346WJKZ J Mirror Clip, x26 AC5-5-15 LX-BZA046WJFN J Screw, x32 AA5-5-16 PMiR-A041WJZZ J Mirror BG5-5-17 PSPAGA187WJ00 J Spacer, x8 AB5-5-18 PSPAHA329WJZZ J Spacer, x2 AB5-5-19 PSPAHA330WJZZ J Spacer, x2 AB5-5-20 PSPAHA337WJZZ J Spacer, x12 AC5-5-21 PSPAZA455WJZZ J Spacer AC5-5-22 PSPAZA466WJKZ J Spacer, x4 AB5-5-23 PZETKA063WJZZ J Insulator AN5-5-24 PZETKA064WJZZ J Insulator AK5-5-25 PZETKA065WJZZ J Insulator AH5-5-26 TCAUZA031WJZZ J Caution Label AB5-5-27 XBBSN40P08000 J Screw, x4 AA5-5-28 XBPSN30P08JS0 J Screw, x6 AB
5-6 KLMP-A041WJZZ J Lamp, x9 BA5-7 LHLDZA307WJK0 J Holder, x2 AK5-8 LHLDZA308WJKZ J Holder, x2 AM5-9 LX-BZA051WJFN J Screw, x5 AB5-10 PCOVUA028WJZZ J Diffusion Panel BH5-11 PSHEPA238WJZZ J Reflection/Diffusion Panel5-12 PSHEPA171WJZZ J Prism Sheet BS5-13 PSHEPA172WJZZ J Diffusion Sheet AX5-14 XBBSN30P08000 J Screw, x6 AA5-15 XBPSN30P08JS0 J Screw, x16 AB5-16 XEBSN30P10000 J Screw, x6 AA5-17 LX-BZA074WJFN J Screw, x8 AA
6 CHLDZA330WJ03 J Bracket Ass’y (L) AV6-1 GLEGGA025WJZZ J Foot, x2 AB6-2 LANGKA257WJSA J Angle Frame AQ6-3 Not Available – Bracket —6-4 LHLDZA357WJKA J Holder AD6-5 PSPAZA384WJZZ J Spacer AD6-6 XEBS930P08000 J Screw, x2 AA
7 CHLDZA335WJ03 J Bracket Ass’y (R) AV7-1 GLEGGA025WJZZ J Foot, x2 AB7-2 LANGKA237WJSA J Angle Frame AQ7-3 Not Available – Bracket —7-4 LHLDZA357WJKA J Holder AD7-5 PSPAZA384WJZZ J Spacer AD7-6 XEBS930P08000 J Screw, x2 AA
8 Not Available – Speaker Ass’y (L) —8-1 CPNLSA019WJ01 J Speaker Panel Ass’y (L) BS8-2 RSP-ZA079WJN3 J Speaker (L)
9 Not Available – Speaker Ass’y (R) —9-1 CPNLSA019WJ03 J Speaker Panel Ass’y (R) BS9-2 RSP-ZA079WJN4 J Speaker (R)
11 DUNTKC268VJ56 – LCD CONTROL Unit —(LC-37G2M)
11 DUNTKC268VJ57 – LCD CONTROL Unit —(LC-37G2X)
11 DUNTKC268VJ58 – LCD CONTROL Unit —(LC-37G2H)
CABINET AND MECHANICAL PARTS(LC-37G2M/X/H)
30
Ref. No. Part No. Description Code Ref. No. Part No. Description Code
LC-32G2M/X/HLC-37G2M/X/H
12 DKEYHC269VJ31 – TMDS Unit —(LC-37G2M)
12 DKEYHC269VJ32 – TMDS Unit —(LC-37G2X)
12 DKEYHC269VJ33 – TMDS Unit —(LC-37G2H)
13 DUNTKC274UJ04 – KEY Unit —(LC-37G2M)
13 DUNTKC274UJ05 – KEY Unit —(LC-37G2X)
13 DUNTKC274UJ06 – KEY Unit —(LC-37G2H)
14 DUNTKC275UJ04 – R/C LED Unit —(LC-37G2M)
14 DUNTKC275UJ05 – R/C LED Unit —(LC-37G2X)
14 DUNTKC275UJ06 – R/C LED Unit —(LC-37G2H)
15 DUNTKC276UJ04 – EXT-SP Unit —(LC-37G2M)
15 DUNTKC276UJ05 – EXT-SP Unit —(LC-37G2X)
15 DUNTKC276UJ06 – EXT-SP Unit —(LC-37G2H)
16 RDENCA081WJZZ J POWER Unit(LC-37G2M)
16 RDENCA059WJZZ J POWER Unit BZ(LC-37G2X) (LC-37G2H)
17 RUNTKA080WJZZ – INVERTER-A Unit —18 RUNTKA081WJZZ – INVERTER-B Unit —19 RUNTKA082WJZZ – INVERTER-A-GND Unit —20 RUNTKA083WJZZ – INVERTER-B-GND Unit —21 QPWBMC494WJPZ J FPC AM23 QCNW-C323WJN1 J Connecting Cord, For-SP Short (L) AL24 QCNW-C323WJN2 J Connecting Cord, For-SP Short (R) AL25 QCNW-C049WJQZ J Connecting Cord, [RM] AK26 QCNW-C050WJQZ J Connecting Cord, [KM] AE27 QCNW-C051WJQZ J Connecting Cord, [TC] AC28 QCNW-C052WJQZ J Connecting Cord, [LV] AC29 QCNW-C055WJQZ J Connecting Cord, [AC] AF30 QCNW-C056WJQZ J Connecting Cord, [IV] AH31 PSLDMA326WJ01 J Main Shield
(LC-37G2M) (LC-37G2H)31 PSLDMA326WJ02 J Main Shield AT
(LC-37G2X)32 PSPAZA454WJZZ J Spacer AC33 PSPAZA455WJZZ J Spacer AC34 PSPAZA456WJZZ J Spacer, x2 AD35 PSPAZA457WJZZ J Spacer, x2 AD36 GCOVAA681WJKA J Terminal Cover (Up) AN37 GCOVAA682WJKA J Terminal Cover (Down) AP38 GCOVAA694WJKA J SP Wire Cover (L) AP39 GCOVAA695WJKA J SP Wire Cover (R) AP40 LHLDZA331WJKA J Bracket Cover, x2 AK42 NFANR0126CEZZ J Fan, x2 AT43 XBBSN50P12JS0 J Screw, x4 AF44 XBBS930P08000 J Screw, x2 AA45 XBBS940P10000 J Screw, x2 AB46 XBBS950P12000 J Screw, x4 AB47 XBPSN30P04J00 J Screw, x2 AA48 XBPSN30P08JS0 J Screw, x30 AB49 XBPSN30P20XS0 J Screw, x4 AB50 XEBSN30P06000 J Screw, x2 AA51 XEBSN30P10000 J Screw, x8 AA52 XEBS930P10000 J Screw, x3 AA53 XBBS940P06000 J Screw, x2 AB54 XEBS940P20000 J Screw, x13 AB57 QCNW-C047WJQZ J Connecting Cord, [BL] AK58 QCNW-C048WJQZ J Connecting Cord, [GV] AG59 QCNW-C044WJQZ J Connecting Cord, [TV] AF60 QCNW-C053WJQZ J Connecting Cord, [PV] AF61 QCNW-C045WJQZ J Connecting Cord, [SO] AF
CABINET AND MECHANICAL PARTS(LC-37G2M/X/H) (Continued)
62 LANGKA293WJZZ J SP Fixing Metal, x2 AH63 LANGKA294WJZZ J SP Fixing Metal, x2 AH64 PSLDMA327WJFW J TMDS Shield AM
(LC-37G2X)65 PSPAGA209WJZZ J Spacer, x2 AA
(LC-37G2X)66 PSPAHA337WJZZ J Spacer, x3 AC
(LC-37G2X)67 PSPAHA338WJZZ J Himeron Spacer AB
(LC-37G2X)
31
LC-32G2M/X/HLC-37G2M/X/H
654321
A
B
C
D
E
F
G
H
CABINET AND MECHANICAL PARTS (LC-37G2M/X/H)
4-5
43
4-2
4-3
4-1
4-8
4
1-6
1-6
1-5
1-3
1-7
1-1
1-2
1-4
1-5
1
51
51
14
2-1
2
54
11
3147
15
4848
32
34
34
51
33
5-16
5-3-2
5-3-3
5-5-13
5-8
5-15
5-15
5-16
5-3
5-3-2
5-8
5-14
5-14
5-15
5-6
5-7
5-7
5-3
5-2
49
42
5-1
5-9
5-11
5-12
5-13
5-10
A
A
B
B
B
H
H
I
J
G
L MK
F
F
3
13
3-1
50
3-3
3-4
3-2
ON
A
A
h
17 18
48
I
J
48
16
49
23
24
38
394842
G
P
Q
3-5
R
b
a
2-2
22
36
37Y
a a P
U ON
US
Xe
V
W
f
R E
d
ZY
K
48
48
19
20
L
M
b b
Q
T
Z
WV
X
4-4
4-7
4-6
4-9
4-6
4-10
S
T
e
f5 5-5
E
D
C
12
47
26
27
21
28
21 25
29
30
35
354-
9
5-3-1
5-3-3
5-4
5-4
5-4-1
5-4-2
5-2-1
5-2-1
5-2-2
5-2-2
5-4-2
5-4-1
5-3-1
5-2
48
2-8
2-13
45
52
44
2-9
2-5
2-7
2-16
2-16
2-17 2-1
9
2-19
2-14
2-19
2-15
2-6
2-17
2-4
2-12
2-10 2-
18
2-19
g
2-3
8-1
8
6 6
7
7
4640
55
5540
46
9
8-2
9-1
9-2
6-5
6-3
6-1
6-4
6-2
7-3
7-2
7-5
7-4
7-1
g
h
57
59
60
58
61
6362
62632-
11
32
LC-32G2M/X/HLC-37G2M/X/H
654321
A
B
C
D
E
F
G
H
5-5-225-5-22
5-5-22
5-5-22
i
i
5-5-16
5-5-155-5
5-5-15
5-5-24
5-5-23
5-5-255-5-5
5-5-155-5-15
5-5-27
5-5-12
5-5-275-5-28
5-5-19
5-5-19
5-5-21
5-5-11
5-5-6
5-5-12
5-5-5
5-5-7
5-5-4
5-5-2
5-5-35-5-8
5-5-105-5-185-5-14
5-5-13
5-5-14
5-5-105-5-18
5-5-9
5-5-26
5-5-20
5-5-20
5-5-20
5-5-20
5-5-20
5-5-205-5-20
33
Ref. No. Part No. Description Code Ref. No. Part No. Description Code
LC-32G2M/X/HLC-37G2M/X/H
(LC-32G2M/X/H)SPAKCB456WJZZ – Packing Case —
(LC-32G2M)SPAKCB457WJZZ – Packing Case —
(LC-32G2X)SPAKCB458WJZZ – Packing Case —
(LC-32G2H)SPAKL0023CEZZ – Joint, x4 —SPAKPA376WJZZ – Wrapping Paper —
( LCD Side)SPAKPA377WJZZ – Wrapping Paper —
( Stand Side)SSAKA1111CEZZ – Polyethylene Bag —SSAKA0170CEZZ – Polyethylene Bag —TLABKA013WJZZ – Bar Code Label —TLABNA784WJZZ – No. Label —
(LC-32G2M)TLABNA785WJZZ – No. Label —
(LC-32G2X)TLABNA786WJZZ – No. Label —
(LC-32G2H)SPAKXB550WJZZ – Buffer Material(Top) —SPAKXB551WJZZ – Buffer Material(Bottom) —SPAKXB578WJZZ – Buffer Material( Stand Side) —SPAKFA650WJZZ – Packing Case (for Accessory) —SPAKCB578WJZZ – Packing Case (Bottom) —
(LC-37G2M/X/H)SPAKCB517WJZZ – Packing Case —
(LC-37G2M)SPAKCB518WJZZ – Packing Case —
(LC-37G2X)SPAKCB516WJZZ – Packing Case —
(LC-37G2H)SPAKL0023CEZZ – Joint, x4 —SPAKPA337WJZZ – Wrapping Paper —
( LCD Side)SPAKPA377WJZZ – Wrapping Paper —
( Stand Side)SPAKPA379WJZZ – Wrapping Paper —
( Speaker Side)SPAKPA380WJZZ – Wrapping Paper —
( Speaker Side)SSAKA1111CEZZ – Polyethylene Bag —SSAKA0170CEZZ – Polyethylene Bag —TLABKA013WJZZ – Bar Code Label —TLABNA849WJZZ – No. Label —
(LC-37G2M)TLABNA850WJZZ – No. Label —
(LC-37G2X)TLABNA848WJZZ – No. Label —
(LC-37G2H)SPAKXA589WJZZ – Buffer Material(Top) —SPAKXA590WJZZ – Buffer Material(Bottom) —SPAKXA591WJZZ – Buffer Material( Stand Side) —SPAKFA688WJZZ – Packing Case (for Accessory) —SPAKCB589WJZZ – Packing Case (Bottom) —
(LC-32G2M/X/H)å QACCKA013WJPZ J AC Cord
(LC-32G2M)å QACCLA027WJPZ J AC Cord AS
(LC-32G2X)å QACCBA041WJPZ J AC Cord
(LC-32G2H)LHLDW0110CESD J Cable Clamp (Large) AETiNS-B306WJZZ J Operation Manual
(LC-32G2M)TiNS-B308WJZZ J Operation Manual
(LC-32G2X)TiNS-B307WJZZ J Operation Manual
(LC-32G2H)TCAUZA123WJZZ J Caution Card (LC-32G2X)
(LC-37G2M/X/H)å QACCKA013WJPZ J AC Cord
(LC-37G2M)å QACCLA027WJPZ J AC Cord AS
(LC-37G2X)å QACCBA041WJPZ J AC Cord
(LC-37G2H)LHLDW0110CESD J Cable Clamp (Large) AETiNS-B306WJZZ J Operation Manual
(LC-37G2M)TiNS-B308WJZZ J Operation Manual
(LC-37G2X)TiNS-B307WJZZ J Operation Manual
(LC-37G2H)UKOGDA002WJZZ J Mini Driver AKTCAUZA123WJZZ J Caution Card (LC-37G2X)
ACCESSORIESPACKING PARTS
(NOT REPLACEMENT ITEM)
SERVICE JIGS
QCNW-C222WJQZ J Connecting Cord 80-pin (FFC) AWQCNW-C223WJQZ J Connecting Cord 12-pin AXQCNW-C224WJQZ J Connecting Cord 8-pin AUQCNW-C225WJQZ J Connecting Cord 5-pinQCNW-C226WJQZ J Connecting Cord 7-pin AT
34
LC-32G2M/X/HLC-37G2M/X/H
PACKING OF THE SET (LC-32G2M/X/H)
Packing Case(Bottom) (SPAKCB578WJZZ)
Buffer Material(Bottom) (SPAKXB551WJZZ)
Buffer Material(for Stand) (SPAKXB578WJZZ)
Wrapping Paper (SPAKPA376WJZZ)
Buffer Material (Top) (SPAKXB550WJZZ) Packing Case
(for Accessorry) (SPAKFA650WJZZ)
AC Cord (QACCBA041WJPZ)
LC-32G2H (QACCKA013WJPZ)
LC-32G2M (QACCLA027WJPZ)
LC-32G2XCable Clamp (LHLDW0110CESD)Operation Manial (TiNS-B307WJZZ)
LC-32G2H (TiNS-B306WJZZ)
LC-32G2M (TiNS-B308WJZZ)
LC-32G2X
Joint (SPAKL0023CEZZ)
Bar Code Label (TLABK0001TAZZ)
Bar Code Label (TLABKA013WJZZ)
Wrapping Paper (SPAKPA377WJZZ)
Packing Case (SPAKCB458WJZZ) LC-32G2H (SPAKCB456WJZZ) LC-32G2M (SPAKCB457WJZZ) LC-32G2X
FRONT
35
LC-32G2M/X/HLC-37G2M/X/H
PACKING OF THE SET (LC-37G2M/X/H)
Packing Case(Bottom) (SPAKCB589WJZZ)
Buffer Material(Bottom) (SPAKXA590WJZZ)
Buffer Material(for Stand) (SPAKXA591WJZZ)
Wrapping Paper (SPAKPA337WJZZ)
SP(R) Wrapping Paper (SPAKPA379WJZZ)
SP(L) Wrapping Paper (SPAKPA380WJZZ)
Buffer Material (Top) (SPAKXA589WJZZ) Packing Case
(for Accessorry) (SPAKFA688WJZZ) AC Cord
(QACCBA041WJPZ)LC-37G2H
(QACCKA013WJPZ)LC-37G2M
(QACCLA027WJPZ)LC-37G2X
Cable Clamp (LHLDW0110CESD)Operation Manial (TiNS-B307WJZZ)
LC-37G2H (TiNS-B306WJZZ)
LC-37G2M (TiNS-B308WJZZ)
LC-37G2XMini Driver (UKOGDA002WJZZ)
Joint (SPAKL0023CEZZ)
Bar Code Label (TLABK0001TAZZ)
Bar Code Label (TLABKA013WJZZ)
Wrapping Paper (SPAKPA377WJZZ)
Packing Case (SPAKCB516WJZZ) LC-37G2H (SPAKCB517WJZZ) LC-37G2M (SPAKCB518WJZZ) LC-37G2X
FRONT
LC-32G2M/X/HLC-37G2M/X/H
COPYRIGHT © 2004 BY SHARP CORPORATION
ALL RIGHTS RESERVED.
No part of this publication may be reproduced,stored in a retrieval system, or transmitted inany form or by any means, electronic, mechanical,photocopying, recording, or otherwise, withoutprior written permission of the publisher.
SHARP CORPORATIONAV Systems GroupQuality & Reliability Control CenterYaita, Tochigi 329-2193, Japan
TQ0000-SSep. 2004 Printed in Japan
SY. KD
Design and Production InformationDesign : JapanProduction : Japan
top related