lcd tv training manual ud6500 ud6400 ud6900 -...
Post on 16-Jul-2018
264 Views
Preview:
TRANSCRIPT
LCD TVTRAINING MANUAL
UD6500UD6400UD6900
Agenda
I. Inside of UD6500
II. New Part of UD6500
III. Board description
IV. Disassembly
V. Trouble Shooting
SAMSUNG
Inside of UD6V
Items SpecificationModel Name UN46D6500VFXZA
General
Size (W*D*H) with Stand 1068.40 x 275.0 x 683.60 (mm)Weight with Stand 16.7 (kg)Panel Resolution 1920*1080
A/V 2AV S-Video X
DVD1 component
480i/p,720p,1080i/pPC 1 Dsub
HDMI 4 HDMI Tuner 1 ATSC/Half NIM/QAM tuner
Sound Output 6 ohm, 10WPIP O
Sound option SRS TruSurround HDDNIe O
Headphone XResponse time 4ms
Luminance [cd/m2, typical] 500C/R 50000:1
Anynet+(hdmi cec) OView Angle(H/V) 178/178
Power Supply AC 110~220V,60HzPower Consumption <210W
Color System NTSCSound System PCM
Spec Comparison
Model
SAMSUNG
(UD6500 46”)
UN46D6500VFXZA
SAMSUNG
(LC6400 46”)
UN46C6400RFXZA
Design
Set Size 1068.4 x 275.0 x 683.6 mm 998.0 X 300.0 X 703.5 mm
Panel
Size Diagonal 46” Diagonal 46”
Resolution 1920 x 1080 1920 x 1080
Viewing angle H : 178 V : 178 H : 178 V : 178
Color System ATSC / NTSC ATSC / NTSC
Tuner 1 1
Function
Contrast (cd/m2) 500 500
CR ( Dynamic ) 50000 : 1 50000 : 1
Enhancer DNIe(FBE3) DNIe(FBE3)
Additional Function
Contents library
Internet@TV
Media Play (USB&DLNA) (MPEG)
Contents library
Internet@TV
Media Play (USB&DLNA) (MPEG)
Power Consumption 200W 200W
Control & Connection Panel
Control & Connection Panel
Rear View
Control & Connection Panel
Control & Connection Panel
Control & Connection Panel
Remote control
IP Board, Main Board, Panel
Inner Feature of UD6V
Power Ass’y
T-con board
Power cable
Main Ass’y
Speaker
LVDS cable
WiFi cable
WiFi module
IP Board, Main Board, Panel
Inner Feature of UD6000 32” / 40” / 46” / 55”
Arsenal / Valencia Block DiagramDDR3-1333256MB
GENOA-S
• Cortex-A9 (@600MHz)Arsenal WW
• SD AFE• SIF Decoder • 165MHz ADC
• VSB & QAM Decoder• HDMI Decoder•IF Demodulator
DDR3 I/F
Hotel/Wall
UARTMAX3222DEBUG
Debug
SPDIF OpticalHDMI 4x1 SWSIL9389
TMDS
RMII
667MHz
Audio AMPTAS5725 SPKI2S0_SPK
IIC
RTL8201 LAN
AK4686S/W, A/DD/A*2, AMP
SIF_I2S
SPDIF
SD VIDEO
HD VIDEO
Interrupt
MMC
HDMI(4ea)
AV In
PC
PC/DVI Audio
YPbPr
RGB HV
AV CVBS
I2S0_MONITOR
Tuner DIF
Monitor Out
PCM_I2S_DATA
TS Parallel
OneNAND128MB
MoviNAND2GB
120Hz
USB 2.0
SMC
DDR3-1333256MB
DDR3-1333256MB
DDR3-1333256MB x4
Wise Link(1 (HDD),2, 3)
STB MICOMWT61P8
IR/Key UART
Component
USB Hub(AU6275)
Bluetooth
Wi-fi
USB 2.0
USB 2.0
Parma
Arsenal WW Internal Block Diagram
GenoaS Internal Block Diagram
Video Input path
Genoa-S
T-half NIM
Tuner SoundSIF_I2S
ASN_SPDIF
IF
I_SPDIF_RX
B_I2S_RX1
O_I2S_TX0
PC/DVI Audio
SC1 In
AV2 In
Optical
SPKHDMI Sound
PCM_I2S_DATACodec Sound
I_SPDIF_RX
O_SPDIF_TX
O_I2S_TX1
(DATA0)
TAS5275
HeadPhone
AK4686S/W, A/DD/A*2, AMP
O_I2S_TX1
(DATA1)
RF Out
Analog
Digital
※ TX1 DATA0/1 라인별차이1. Data0/1 Post Processing 수행(AMP
출력)2. Data0/1 Volume 저장값다름
(Main Speaker용, Headphone용)
AV1 In
Component1
AE30
Line out
SC1_Sound
SPK
Line OUT
SDTI2
SDTI1
SCL_CSDA_C
SCLSDA
SDTO1
LRIN1
LRIN4
LRIN3
HP_LINE
LROUT1
LROUT2SC1_SL/R_OUT
HPL/R_IN
SDIN
HPL/R_OUT
OUT A-D
SPDIF_OUT
TX1_SDOUT
ArsenalWW
지역 RF Out H/P LINE Out
미주 X X O
성장/브라질 X O X
구주 O O X
● 지역별 Audio Out사양
HP
미주
구주 / 성장
미주
구주/성장
미주
구주/성장
구주
Reset Tree
Genoa-S
⑤
AK4686(S-Codec)
TAS5725(S-AMP)
nRESET_OUT
⑤ LAN_nRESET RTL8201
Micom_RESET
TUNER
⑦ LVDS_OUT
⑤ USB_nRESET
ArsenalWW
KFG1G16U2D(OneNAND)
WeltrendMICOMSMPS
Standby
B+ Power
RT9818(Reset IC)
MICOM_nRESET①
SW_POWER②
RT9818(Reset IC)
POWER_DET③
SW_INVERTER⑧
④SYS_nRESET
PANEL
LVDS
B13VSW_PVCC⑥nRESET
RESET
EPM240T(CPLD)
AU6257(USB HUB)
⑤ NCI_RESET CI
⑤ RESET_BTFunction(Bluetooth)
I2C
Genoa-S
SCL_CSDA_C
I2C1_CLK
I2C1_DAT
MI2C2_CLKMI2C2_DAT
I2C2_CLKI2C2_DAT(CS2,3공용핀)
Sound AMPTAS5725(0x44)
Switching IC(NC7WB3125K8X)
SCL_ASNSDA_ASN
Arsenal WW
ATSC:0x26DVB-T:0x06 / DVB-C:0x16
SIL9287(0xB0)
I2C0_CLK
I2C0_DAT
Audio CodecAK4686 (0x24)
AT24C256BN (0xA0)
SCL_PANELSDA_PANEL
SCL_MAIN_EEPROM SDA_MAIN_EEPROM
LD(0xD2)
SCL_LDSDA_LD
TUNER(0xC2)
SCL_TUNERSDA_TUNER
MI2C0_CLKMI2C0_DAT
MI2C1_CLKMI2C1_DAT
Function Module(Reserved)
MSCL_A5VMSDA_A5V
Internal MICOM
I2C3_CLKI2C3_DAT
(GPIO0,1공용핀)
S-24CS02AFJ (0xA0)
SCL_SUB_EEPROM SDA_SUB_EEPROM
MSPI / I2C
LNBH23 (EU-TS)(0x14)
Sub MICOMWELTREND
PANEL(Depend on Panel Type)
SCL_TCON SDA_TCON
Switching IC(NC7WB3125K8X)
SCL_DOWNSDA_DOWN
UART
GENOA-SUART0_TX UART0_RX
LVDS Connector(PDP Option)
74HC4052D
TX_DEBUG
RX_DEBUG
MUART1_TX MUART1_RX
MUART2_TX MUART2_RX
ADM3232
MTX1_AUTOWALL
MRX1_AUTOWALL
TDA_MICOM
RDA_MICOM
TDB_LOGIC
RDB_LOGIC
TDB
RDB
MUART0_TX MUART0_RX
Internal MICOM
Sub MICOMWELTREND
3X/Y
0X/Y
2X/Y
D-SUB
1X/Y
MTX2_HOTEL
MRX2_HOTELSW_SEL1/2
FRAME_SYNC_OUT
FRAME_SYNC_IN
Bluetooth
Power Tree
481mA
41mA
PANEL_13V_VCC
7mA
A5V 0.7A
A3.3V
B13V 2.37A
WELTREND
MAX3222
Arsenal WW (D1.2V)
3mA
GEN_1.1V
S-24CS02AFJ3mA
750mA
1mA
TPS546204546mA
1.7~6.5V/0.25A
1mA
1mA
4.5~17V/6A/84%
S-1206B33
74HC4052D
236mAAOZ1031
Function
1736mA DDR_1.5V4.5~18V/3A/85%GENOA-S(1.1V)
GENOA-S (1.5V)
GENOA-S (2.5V)
GENOA-S (3.3V)
4546mA
656mA
86mA
217mA
KLM2GDEHD150mA
KFG1G16U2D
K4B2G1646B x2K4B1G1646B x2
300mA x2, 240mAx2
Audio Output 출력의 20% 마진요청 EX) 15W + 15W , Sound 전원이 18V 공급될경우 : ( 30[W] X 1.2 ) / 18 = 2[A]
65mA
330mA
RTL8201
AK4686
149mA
3mA
AT24C256BN
TAS57251mA
35mAB3.3V4.5~18V/3A/91%
AOZ10311289mA
B5V 3.5AAP1117-33
597mAArsenal WW (D3.3V)
597mA
500mA 500mATPS2553 USB CONN2
USB CONN1AP2191 1500mA
380mA
4.75~12V/1A
1500mA
B5V
SIL9389(HDMI SW)7mA
AP1117-33ASN_3.3V_AFE 160mA
FAN1112ASN_1.2V_AFE 170mA330mA
330mA
7mA
Arsenal WW (A3.3V)
Arsenal WW (A1.2V)
4.75~12V/1A
~18V/1A
275mA
B18V 1.11A (120Hz Panel)
86mA
B1.2V
670mA4.5~18V/3A/84%
AOZ1031
750mA
0.041[A]
A5V
MM3374A25
1.3~5.5V/1A
PANEL(46” 120 LED)
GEN_3.3V
ASN_3.3V
250mATUNER (1.8V)
AU6257?mA
BLUETOOTH40mA
Wi-fi
S-1172B33360mA
S-1172B18
TUNER (3.3V)360mA
1557mA
USB CONN3500mA500mA
40mA40mA1A
168mA
733mA
250mA
Sub EEPROM
Debug port
UART
Sound AMP
Sub MICOM
HDMI SW
ONE NAND
MOVI
M24256 Main EEPROM
USB HUB
LAN
40mA
B3.3V_TUNER_PW
TAS5725 Sound AMP
Sound CODEC
SIL9389
ASN_1.2V
SIL9389887mA
계산치 : 1.91[A]실측치 : 1.1[A]
계산치 : 1.38[A]
실측치 : 0.6[A]
USB동글USB_FlashUSB_HDD연결시1.13[A]
Reset Timing Sequence
MICOM_nRESET
MICOM_nRESET DPMS ENTER
DPMS OUT
DPMS MODE
SW_PVCC
PowerOff
MasterOffNormal
OperationNormal
Operation Stand by
LVDS_OUT
PWM_Dimming
SW_Inverter
ANA_Dimming
*Device Port Initial (CPU & Smicom)
*Device Initial
*Device Reset Period
50ms 이하
100ms
1S 이상
1S
Adaptive Dimming Control Adaptive Dimming Control
50ms 이하
50ms 이하
100ms
1S 이상
1S
100ms 이상
50ms 이하
nRESET_OUTFRC_RESET
PCI_NRESET
SYS_nRESET
SAMSUNG
New Function of UD6V
Auto Motion Plus 120Hz
Removes drag from fast scenes with a lot of movement to provide a clearer picture.
* If you enable Auto Motion Plus 120Hz, noise may appear on the screen. If this occurs, set Auto Motion Plus 120Hz to Off.
Dolby Digital Plus
Media Play(USB & DLNA)
Media Paly_USB
Media Play(USB & DLNA)
Media Play(USB & DLNA)● Supported Format vs. ‘08
’08 Video format ’09 Video format
•There are some technical differences between USB(local play) and DLNA(network play).So DLNA may have some limitations of functions such as play, seek, jump in unusual case.
internet@TV
Dock Mode Side br Mode
OTN
DB
Internet
Network serverModel A
Model B
Model C
User• automatic upgrade• high speed downloading• reliable upgrade
•Secure & safe upgrade•Fault tolerancing
Authentication
Compatible SW query
SW download
SW management
•Scalable service•Secure & reliable
■ Purpose of OTNbecause of variable contents and devices, TV softwere will be more and more complicate. So it is necessory that TV softwere is updated real time.
Server ManagerDTV
1
2
3
4
1 2 3 4
1. DTV registration info.3. Installed S/W info.7. Download info.8. Install result
/ Error info.
2. Verify registration 4. Available S/W info.5. Install S/W info.6. S/W Image
/ Security key
- Install error info.- Statistics info.- Statistics of error info.
- Model info.- Model S/W ver info.- S/W release policy
OTN
Home Network Center
• Home Network Applications that bulit in networking DTV.
• Message: TV display the message, phone call list, schedule of cell phone by network.
• Media: TV play the movie, picture, music that stored in cell phone by network.
SMS
Phone call
Schedule
HHPTV
Player
Server
Controller, Server
Player
Supported PC timing
Supported PC timing
PIP/POP Table
* PIP support .- You can view PIP screen when the main picture is HDMI1,2,3,4, Component 1,2 or PC
Amber(08’) LC6400(09’/10’)
HDMI/DVI edit name
* Auto : System judge that source type automatically, and select sound input(HDMI/DVI).
Amber(08’)HDMI2/DVI HDMI1/DVI
LC6400(09’/10’)
Disassembly
SAMSUNG
DISASSEMBLY
DisassemblyDisassembly of LB6T
DisassemblyDisassembly of LB6T
DisassemblyDisassembly of LB6T
DisassemblyDisassembly of LB6T
DisassemblyDisassembly of LB6T
DisassemblyDisassembly of LB6T
DisassemblyDisassembly of LB6T
Trouble Shooting
SAMSUNG
Trouble Shooting
Trouble Shooting
-. Power cord in to the set-. Power swich on-. You can sound IP relay (not for 40”)
* If you can’t sound, check the STB_5V appear -. Back-light on
* If back-light doen’t on-> Check the backlight on, when 30p power cable is not
connected.-. Picture on or display the banner
* If display is nothing, check the LVDS cableAnd LVDS clk/data line
Check List for Initial operation
Trouble Shooting
-. Check the Side-Lable Ver. in set (important)-. Order to the item with Side-Lable Ver.-. If you change the item, see the service-bulletin
for setting the factory option.
-. If set is connected internet and software is old version , popup below message.
“ version XXXXX is available, upgrade?”
-. And select OK, you can update your LCD TV.
Inform to change the Assembly
Inform about error messages
Trouble Shooting - No PowerPower indicator LED is on?
No Check a connetion power code.
YES
Check the backlight on,when 20p cable unconnected ?
NO
Change 20p cable.Change Main Power Ass'y.
YES
Check ‘Stand-By 5V’ ? No- BD203 : A5V
NO
YES
Check ‘Power input of Main Ass'y’ ?- BD206 : B18VS
- BD207/208/209 : B13V- BD201 : B5V
NO
YES
Check ‘Power IC output of Main Ass'y’ ?L202 : B3.3V / L203 : B1.2VL204 : B1.1V / L201 : B1.5VIC203 : 3.3V / IC208 : 3.3V
NO Change the Main Ass'y.
YES
Check Input power of ‘T-con b’d’ ?- F11(T-CON) : B13V
NO Reconnect or Change.the LVDS cable.
YES
Check Power of ‘T-con b’d’.- L9(T-CON) : VCC12- TP_VCC33 : VCC33
NO Change the T-con B’d
YES
Please, Contact tech support.
Trouble Shooting – No Video (analog PC)
Power indicator LED is off.Lamp(Backlight) on, no video ?
No Check a set in the ‘Stand-by mode’or ‘DPMS mode’.
YES
Check the PC source and check the connection of D-SUB ?
NO Input the analog PC signal properly.
YES
Check the signal appear at input of IC901 ?PC_RED : BD401
PC_GREEN : BD402PC_BLUE : BD403
PC_H_SYNK : R408PC_V_SYNK : R409
NO Check CN401, PC cable.Change the Main Ass'y.
YES
Check the LVDS clk signal at output ofMain board.(TX)
TX2_CLK : LV_TX2_DN/DPTX4_CLK : LV_TX4_DN/DP
NO Check IC1001(GenoaS) andIC2001(Parma).
Change the Main Ass'y.
YES
Check the LVDS cable?Replace the T-con / LCD panel?
NO Please, Contact Tech support.
Trouble Shooting – No Video (analog PC)
Trouble Shooting – No Video (HDMI)Power indicator LED is off.
Lamp(Backlight) on, no video ?No Check a set in the ‘Stand-by mode’
YES
Check the HDMI source andcheck the connection of HDMI cable ?
NO Input the HDMI signal properly.
YES
Check the signal at Input of Main board ?HDMI1 Clk : Pin #31,#32 of IC601
DATA : Pin #33~#38 of IC601HDMI2 Clk : Pin #21,#22 of IC601
DATA : Pin #23~#28 of IC601HDMI3 Clk : Pin #11,#12 of IC601
DATA : Pin #13~#18 of IC601HDMI4 Clk : Pin #2,#3 of IC601
DATA : Pin #4~#9 of IC601
NO Check CN601~4.Check HDMI cable.
Change the Main Ass'y
YES
Check the signal at Output of ‘HDMI switchIC’ ?
HDMI RX_Clk : Pin#116~117 of IC601RX_Data : Pin#110~115 of IC601
NO Check IC601(HDMI switch).Change the Main Ass'y
YES
Check the LVDS clk signal at output ofMain board.(TX)
TX2_CLK : LV_TX2_DN/DPTX4_CLK : LV_TX4_DN/DP
NO Check IC1001(GenoaS) andIC2001(Parma).
Change the Main Ass'y.
YES
Check the LVDS cable?Replace the T-con / LCD panel?
NO Please, Contact Tech support.
Trouble Shooting – No Video (HDMI)
Trouble Shooting – No Video (Tuner CVBS)Power indicator LED is off.
Lamp(Backlight) on, no video ?No Check a set in the ‘Stand-by mode’
YES
Check the RF source andcheck the connection of RF cable ?
NO Input the RF source properly.
YES
Check the Power of Tuner ?Pin #4 of Tuner : B3.3V_TunerPin #2 of Tuner : B1.8V_Tuner
NO Change the Main Ass'y.
YES
Check the CVBS data out of IC901 ?C941 : Tuner CVBS
NO Check Tuner and IC801(Arsenal).Change the Main Ass'y.
YES
Check the LVDS clk signal at output ofMain board.(TX)
TX2_CLK : LV_TX2_DN/DPTX4_CLK : LV_TX4_DN/DP
NO Check IC1001(GenoaS) andIC2001(Parma).
Change the Main Ass'y.
YES
Check the LVDS cable?Replace the T-con / LCD panel?
NO Please, Contact Tech support.
Trouble Shooting – No Video (Tuner CVBS)Power indicator LED is off.
Lamp(Backlight) on, no video ?No Check a set in the ‘Stand-by mode’
YES
Check the RF source andcheck the connection of RF cable ?
NO Input the RF source properly.
YES
Check the Power of Tuner ?Pin #4 of Tuner : B3.3V_TunerPin #2 of Tuner : B1.8V_Tuner
NO Change the Main Ass'y.
YES
Check the CVBS data out of IC901 ?C941 : Tuner CVBS
NO Check Tuner and IC801(Arsenal).Change the Main Ass'y.
YES
Check the LVDS clk signal at output ofMain board.(TX)
TX2_CLK : LV_TX2_DN/DPTX4_CLK : LV_TX4_DN/DP
NO Check IC1001(GenoaS) andIC2001(Parma).
Change the Main Ass'y.
YES
Check the LVDS cable?Replace the T-con / LCD panel?
NO Please, Contact Tech support.
Trouble Shooting - No Video (Tuner DTV)Power indicator LED is off.
Lamp(Backlight) on, no video ?No Check a set in the ‘Stand-by mode’
YES
Check the RF source andcheck the connection of RF cable ?
NO Input the RF source properly.
YES
Check the ‘signal strength’ in Self Diagnosismenu Strength is enough ?
NO Check the D-TV source.
YES
Check the Power of Tuner ?Pin #4 of Tuner : B3.3V_TunerPin #2 of Tuner : B1.8V_Tuner
NO Change the Main Ass'y.
YES
Check the CHIF output of IC801 ?Pin #10 of Tuner : DIF+Pin #11 of Tuner : DIF-
NO Check Tuner and IC801(Arsenal).Change the Main Assy.
YES
Check the LVDS clk signal at output ofMain board.(TX)
TX2_CLK : LV_TX2_DN/DPTX4_CLK : LV_TX4_DN/DP
NO Check IC1001(GenoaS) andIC2001(Parma).
Change the Main Ass'y.
YES
Check the LVDS cable?Replace the T-con / LCD panel?
NO Please, Contact Tech support.
Trouble Shooting - No Video (Tuner DTV)
Trouble Shooting - No Video (Video CVBS)Power indicator LED is off.
Lamp(Backlight) on, no video ?No Check a set in the ‘Stand-by mode’
YES
Check the video source andcheck the connection of video cable?
NO Input the video source properly
YES
Check the CVBS signalat Input of IC801(Arsenal) ?
AV1 R501 : AV1_CVBSAV2 R505 : AV2_CVBS
NO Check CN502 or CN501.Change the Main Ass'y.
YES
Check the CVBS clk signalat output of IC801 (Arsenal)?
R807 : ASN_CVBS_CLK
NO Check IC1001(GenoaS) andIC2001(Parma).
Change the Main Ass'y.
YES
Check the LVDS clk signal at output ofMain board.(TX)
TX2_CLK : LV_TX2_DN/DPTX4_CLK : LV_TX4_DN/DP
NO Check IC1001(GenoaS) andIC2001(Parma).
Change the Main Ass'y.
YES
Check the LVDS cable?Replace the T-con / LCD panel?
NO Please, Contact Tech support.
Trouble Shooting - No Video (Video CVBS)
Trouble Shooting - No Video (Component)Power indicator LED is off.
Lamp(Backlight) on, no video ?No Check a set in the ‘Stand-by mode’
YES
Check the component source and check the connection of component cables(Y,Pb,Pr) ?
NO Input the component source properly.
YES
Does the component data appear at ?Comp1 Y : R537
Pb : R544Pr : R542
NO Check CN501 or Compnent gender.Change the Main Assy
YES
Check the LVDS clk signal at output ofMain board.(TX)
TX2_CLK : LV_TX2_DN/DPTX4_CLK : LV_TX4_DN/DP
NO Check IC1001(GenoaS) andIC2001(Parma).
Change the Main Ass'y.
YES
Check the LVDS cable?Replace the T-con / LCD panel?
NO Please, Contact Tech support.
Trouble Shooting - No Video (Component)
Trouble Shooting – No SoundCheck the source and check the connectionof sound cable (Comp/PC/DVI to HDMI) ?
No Input the sound source properly.
YES
Check the signal at input of Main board?AV1, COMP1 R : R541 / L : R539
PC, DVI R : L401 / L : L402
NO Check CN501, CN402.Change the Main Assy.
YES
Check the DATA between the Audio IC’s ?Pin #15 of IC301 : MclkPin #20 of IC301 : LRclk
Pin #22,#23 of IC301 : I2C_DA/CL
NO Check IC301, IC303.Change the Main Assy.
YES
1. Check the Speaker sound data at CN3012. Check the Monitor out sound data at CN3023. Does the SODIF OUT sound data appearat ? CN303
NO Check IC301, IC303.Change the Main Assy.
YES
Replace speaker ? NO Please, Contact Tech support.
Trouble Shooting – No Sound
- Adjust Panel option, and install EDID data in Factory mode
DOs after changing assembly
<Factory menu>
Trouble Shooting
Check PointModel : UD6000Type :
32” :40” :46” :55” :
①EDID on -> ②EDID WRDTE ALL
Trouble Shooting
Factory mode
Trouble Shooting
Factory mode
Trouble Shooting
Factory mode
Trouble Shooting
Factory mode
Trouble Shooting
Factory mode
Trouble Shooting
Factory mode
Trouble Shooting
Factory mode
1. Symptoms : Star noise.Trouble shooting : Factory mode -> Control -> Config option -> HDMI EQ ChangeOR
Factory mode -> Sub Option -> DVOUT CD : level change
2. Symptoms : Can not detect HDMI devices.Trouble shooting : Factory mode -> Control -> Config option
-> HDMI Hot Plug : Disable(Defalt value of HDMI Hot Plug is ‘Enable’)
1. Symptoms : Star noiseTrouble shooting : Factory mode -> Sub Option -> DVOUT CD : level change
Trouble ShootingCompatibility problem
HDMI
Component
Adjustment (Calibration -> White Balance)
White balance
Pattern : MIK K-7256 #24 ‘Chessboard Pattern’Set Aging time : 60min↑
- HDMI Calibration (Time #6, 720p)- COMP Calibration (Time #6, 720p)- CVBS Calibration (Time #3, NTSC-J)- PC Calibration (Time #21, 1024*768)
Calibration
<Factory menu>
Adjustment (Calibration -> White Balance)
White balance
Test : CA-210Pattern : MIK K-7256 #92 ‘Flat W/B Pattern’Set Aging time : 60min↑
White Balance
<Factory menu> <Adjustment value> 40inch
Important Spec.SUB-CONTRAST: 133, Gamma: 0.95
USB Download
USB Download
top related