lecture 09 sections [part-2]
Post on 05-Apr-2018
214 Views
Preview:
TRANSCRIPT
-
7/31/2019 Lecture 09 Sections [Part-2]
1/21
Faculty of Mechanical Engineering
Ghulam Ishaq Khan Institute of Engineering Sciences & Technology
ME-102 Engineering Graphics
Lecture #: 08
Sections [Part - 2]
Lecture By: Muftooh Ur Rehman Siddiqi
Research Associate
Office # G-17 - FME
Email: muftooh@giki.edu.pk
-
7/31/2019 Lecture 09 Sections [Part-2]
2/21
Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 2 of 20
Sectional View Types
Following are the different types of sections
Full Section (Lecture-8)
Half Section
Broken-out Section
Revolved Section
Removed Section (Detailed and Aligned)
Offset Section
Assembly Section (self study)
Auxiliary Section (self study)
Practice
-
7/31/2019 Lecture 09 Sections [Part-2]
3/21
Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 3 of 20
Full Section
A full section view is made by passing the imaginary cutting planecompletely through an object.
-
7/31/2019 Lecture 09 Sections [Part-2]
4/21
Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 4 of 20
Half Section
Half sections are created by passing an imaginary cutting plane onlyhalfway through an object.
Cutting plane line bend around 90
Half sections views are used most often on parts thatare symmetrical, such as cylinders.
-
7/31/2019 Lecture 09 Sections [Part-2]
5/21 Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 5 of 20
Broken-Out Section A broken-out section is used when only a portion of the object needs to be
sectioned.
They are some time used instead of half section to save time. A break line is drawn freehand.
No CP line is drawn.
-
7/31/2019 Lecture 09 Sections [Part-2]
6/21 Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 6 of 20
Revolved Section
A revolved section is made by revolving the cross-section view 90degrees about an axis of revolution and superimposing the section
view on the orthographic view.
When the revolved view is superimposed on the part, the originallines of the part behind the section are deleted.
The cross-section is drawn true shape and size. The axis of revolution is shown on the revolved view as a
centerline.
Revolved sections are useful for describing a cross-section w/o
having to draw another view.
-
7/31/2019 Lecture 09 Sections [Part-2]
7/21 Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 7 of 20
Revolved Section (Illustration)
-
7/31/2019 Lecture 09 Sections [Part-2]
8/21 Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 8 of 20
Removed Section Area Section
Removed sections are used to show the contours of complicatedshapes, such as wings and fuselage of an airplane, blades for jet
engines or power plant turbines etc. They are often used when there is not much room for revolved sections.
The removed section view is then labeled, such as SECTION A-A
-
7/31/2019 Lecture 09 Sections [Part-2]
9/21 Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 9 of 20
Removed Section (Contd)
Multiple removed section views of a connecting rod identified withlabels
-
7/31/2019 Lecture 09 Sections [Part-2]
10/21 Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 10 of 20
Detail View
Removed section can also be drawn to a larger scale for betterrepresentation of the details of the cross-section and for
dimensioning.
The scale used for the removed section view is labeled beneaththe view.
-
7/31/2019 Lecture 09 Sections [Part-2]
11/21
Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 11 of 20
Aligning Removed Section View
Sometimes removed sections are placed on center lines adjacent tothe axis of revolution.
-
7/31/2019 Lecture 09 Sections [Part-2]
12/21
Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 12 of 20
Offset Section
Offset sectional views are used in cases where the sections to beshown do not lie in a straight line.
The CP is bent (more than once), to show a number of sectionalviews as one view.
The offset section are used for complicated parts that cannot be
sectioned by a single straight CP line.
-
7/31/2019 Lecture 09 Sections [Part-2]
13/21
Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 13 of 20
Offset Section
-
7/31/2019 Lecture 09 Sections [Part-2]
14/21
Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 14 of 20
Aligned Section
Aligned sections are special types of orthographic drawings usedto revolve or align special features of parts, to clarify them or make
them easier to represent in section.
The principles of orthographic projection are violated in order tomore clearly represent the features of the object.
-
7/31/2019 Lecture 09 Sections [Part-2]
15/21
Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 15 of 20
Aligned Section (Contd)
-
7/31/2019 Lecture 09 Sections [Part-2]
16/21
Self study
Conventional breaks
Assembly section
Auxiliary section
Quiz next week.
Lecture 8, 9 and lab included.
Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 16 of 20
"Muslims who possess better morals are the most perfect in faith ." ( Mishkat)
-
7/31/2019 Lecture 09 Sections [Part-2]
17/21
Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 17 of 20
Thank you
S
-
7/31/2019 Lecture 09 Sections [Part-2]
18/21
Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 18 of 20
Assembly Section
Assembly sections are typically orthographic, pictorial, full or halfsection views of parts as assembled.
Leonardo da Vinci was one of the first to create assembly section,
using them to illustrate pictorially the complex machine designs ashe developed.
Standard parts not sectioned
A bl S i (E l )
-
7/31/2019 Lecture 09 Sections [Part-2]
19/21
Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 19 of 20
Assembly Section (Examples)
Injection mold assembly Hatching pattern differentfor different parts
A ili S ti
-
7/31/2019 Lecture 09 Sections [Part-2]
20/21
Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 20 of 20
Auxiliary Section
Auxiliary section can be a full or partial section.
They follow the same convention as other types of sections.
C ti l B k
-
7/31/2019 Lecture 09 Sections [Part-2]
21/21
Muftooh Ur Rehman Siddiqi, RA-FME, GIK Institute Page 21 of 20
Conventional Breaks
Conventional breaks are used toshorten elongated part.
This allows to draw a part at largerscale.
top related