local extractors › wp-content › uploads › produktblad_pr_en...330 290 +-a friction brake can...
Post on 06-Jul-2020
1 Views
Preview:
TRANSCRIPT
Pure advantages
New technology in combination with new materials and a focus on design gives Fumex PR many new and important advantages:
- Unique ease of manoeuvrability.- High positional stability.- Hood designed for maximum capture
efficiency and extraction.
PR's design is based on FUMEX's basic principles: - External arm support.- Hose dimensions according to require-
ment: 100, 125 or 160 mm.- Hose quality according to application.- Supplied partially assembled for ease of
installation.
PR can be equipped with LED lighting and/or switch to control fan/damper. FUMEX PR is available in the lengths 1.5, 2, 3, 4, 5, 7, 9 and 11 m.
The ideal extractor for industrial environments.
The Fumex range also includes fans, accessories, automatic control gear and filters for local extraction
L O C A L E X T R A C T O R S
Fumex PR
Always choose low pressure dropLow pressure drop always saves energy. In addition, low pressure drop produces a lower sound level, reducing the risk of disruptive ventilation noise and can more easily be combined with other extractors in the same system.
External arm supports deliver numerous advantagesAn externally positioned arm support has many advantages compared to extractors that have the supporting part internally in the extraction duct.
- Making the necessary adjustment to the friction joints is very simple.
- Option of selecting the correct hose dimension, Fumex PR is available in dimensions 100, 125 and 160 mm.
- Light-weight construction with two gas springs balancing its own weight.
- In addition always has the lowest possible pressure drop.
The external link joints enable hose dimensions of 100, 125, and 160, and also make adjustment of the joints simple and relatively clean.
Compared to extractors with internal link systems, the PR arm has approx. 50% lower pressure drop.
Extractors with link joints internally in the suction duct have limitations and disadvantagesTheir size restricts the link joint's hose dimensions to 160mm as the smallest possible selection, moreover, the location makes the necessary adjustment of the joints both difficult and often dirty.
There is up to double the pressure drop compared with Fumex PR.
Internal arm support
Fumex PR with external arm supports and joints delivers flexibility and advantages.
500
1000
1500
2000
500 1000 1500 2000 m³/h
Ø160
10-14m/s
14-16m/s
16-18m/s
11m9m7m5m4m3m2m
1.5m
500
1000
1500
200 400 600 800 m³/h
Ø125Ø100
11m9m7m5m4m3m2m
1.5m
11,9,7,5,4,3,2,1.5m
10-14m/s
14-16m/s
16-18m/s
10 - 14 m/s
14 - 16 m/s
16 - 18 m/s
Stati
c pr
essu
re d
rop
(Pa)
Air flow (m³/h)
PR RFWhite brackets in powder coated steel.Arm supports in anodised aluminium and joints in white PA & PP.White hood with anthracite grey handle in injection moulded PP, stain-less hood plate and screws. Bracket element in contact with the evacuated air made of stainless material.Hose of white PE-coated polyamide fabric.Used for evacuating corrosive gases.
PR WHITE White brackets in powder coated steel.Arm supports in anodised aluminium and joints in white PA & PP.White dome with anthracite grey handle, injection moulded in PP with dome plate in anodised aluminium.Hose in white PVC.
PR STANDARDBrackets in powder coated steel. Arm supports in anodised aluminium and joints in anthracite grey PA & PP.Hood designed in accordance with EU standard. Injection moulded in anthracite grey PP with hood plate in anodised aluminium.Hose of dark-blue PVC.
A range of designs for different needs
The PR arm is also available in an ATEX version, see separate product sheet.
Stati
c pr
essu
re d
rop
(Pa)
Air flow (m³/h)
Optimally designed hoodThe hood is designed for maximum capture efficiency.It is ideal for capture of welding fumes and other hot contaminants. Capture efficiency for isothermal (non-hot) contaminants can be further improved by using the Coanda effect, which means that the air stream fol-lows a level, solid surface, e.g. a table or a bench, rather than flowing freely through the room.
Flow & Pressure Drop DiagramThe black line indicates the pressure drop for the arm in the same position as in the sketch. Recommended transport velocity for welding fumes is 18m/s. (See blue lines for each dimension.)
310
B
310
B
Ø 12 (3X)
160
100
200 900 80140
200
A
B
310
B
Ø 12 (3X)
160
100
200 80
33027
0
140
200
110
173
1900200 180100Ø 12 (4X)
Ø
Ø
Ø
PR 4000
PR 1500, 2000 & 3000
PR 5000
1450
1450
990
990
1000
2000
3000
36203930
46305210
150
235
A B Working radius*
Max. radius
(mm) (mm) (mm) (mm)
PR 1500 420 490 910* 1500
PR 2000 950 490 1440** 2030
PR 3000 1450 990 2690** 3030
* At a mounting height of 1.8 m and a working height of 750 mm. ** At a mounting height of 2.1 m and a working height of 750 mm.
Working radiusMax. radius
Working radiusMax. radius
Working radiusMax. radius
All models in Ø 100, 125 & 160
***At a mounting height of 2.5 m and a working height of 750 mm.
**At a mounting height of 2.1 m and a working height of 750 mm.
310
B
150
235
200
335
310
310
200
335
110
173
2950200
90080
135
Ø 12 (4X)
Ø 12 (6X)
Ø 12 (6X)
135
160
160
200
200
80
80
100
100
PR 7000
PR 9000
PR 11000
Ø
1450
1450
1450
990990
990
Ø
Ø
15004200
5920 2000
100
64006980
82508830
1047011050
Working radiusMax. radius
Working radius
Max. radius
Working radius
Max. radius
***At a mounting height of 2.5 m and a working height of 750 mm.
***At a mounting height of 2.5 m and a working height of 750 mm.
***At a mounting height of 2.5 m and a working height of 750 mm.
Non-working area
Non-working area
All models in Ø 100, 125 & 160
Ø
Ø
Ø
Ø
*
Ø
*
Ø
*
12 (x4) 12 (x4)
12 (x4)
12 (x4)
142
125165
150
180
206395
500 - 1500
8500 - 2000
500 - 2000
150180
108 400
8383
9595
8
150180
108
500 - 2000
150
180
8
245
2200
500
- 200
0
500
- 200
022
00
245
2745
500
- 200
0
2500
2100
2100
PTS Length Ø C Weight
Article (mm) (mm) (mm) (kg)
PTS 500-125 500 Ø125 300 6,6
PTS 1000-125 1000 Ø125 300 8,1
PTS 1500-125 1500 Ø125 300 9,6
PTS 500-160 500 Ø160 320 7,8
PTS 1000-160 1000 Ø160 320 9,7
PTS 1500-160 1500 Ø160 320 11,7
Ceiling bracket for extractor type Fumex PR in lengths 1.5, 2 and 3m. Rotatable 360°, Ø125 and Ø160mm.
Brackets for ceiling and floor mounting.Fumex PR is supplied as standard including wall bracket. The following brackets are available for ceiling- and floor mounting.
Accessories
PTX Length Weight
Article (mm) (kg)
PTX 500 500 5
PTX 1000 1000 7,5
PTX 1500 1500 10
PTX 2000 2000 12,7
PTX 2200* 2200 14
PTZ Length Weight
Article (mm) (kg)
PTZ 500 500 7,6
PTZ 1000 1000 12
PTZ 1500 1500 16,6
PTZ 2000 2000 21,2
PTZ 2500* 2745 25,7
*Floor bracket
Ceiling- and floor bracket for extractor type Fumex PR in lengths 5 and 7m. Rotatable 180°.
PTX 180 Length Weight
Article (mm) (kg)
PTX 180 500 500 6,7
PTX 180 1000 1000 9,3
PTX 180 1500 1500 12
PTX 180 2000 2000 14,5
PTX 180 2200* 2200 15,5
*Floor bracket
*Floor bracket
PTX
Ceiling- and floor bracket for extractor type Fumex PR in lengths 1.5, 2, 3 & 4m. Rotatable 180°.
Ceiling- and floor bracket for extractor type Fumex PR in lengths 1.5, 2, 3 & 4m. Rotatable 360°.
PTX 180
PTZ PTS
3500
330
290
+-
A friction brake can be mounted on the longer arms 5, 7, 9 and 11m. The brake is mounted under the wall bracket's joint, giving the arm optimum manoeuvrability and ensuring that the arm stays in the position selected.
The friction brake is included as standard in PR 9000 and PR 11000 and can be ordered as an accessory for PR 5000 and PR 7000.
Work lighting and fan control.Fumex PR can be supplied with work lighting and a push button for fan and damper control.
With magnetic nozzle and quick connection adapted to the PR arm.
Output ...........................5 W at 350 mAIlluminance ................................ 2000 lxColour temperature ...................6500 K
Extension hose
Technical data - lighting
Accessories
Hose, PVC coated polyamide fabric with fully embedded spring steel coil,Temperature range -10° to +90°CPlastic components PA, PA 30% Aluminium components AnodisedSteel components Black oxidised, chromed or powder coated
Friction brake
Article Description Length (mm) Weight (kg)
PR 100-6340 Friction brake 212 0.3
PR LED LED work lighting including cabling, transformer and push button.
PR TPush button for control of fan or damper.
PR LED/TLED work lighting including cabling and transformer with push button and an additional push button for control of fan/damper.
Article Description Ø Length (mm) Weight (kg)
PFS -125/4 Extension hose Ø125 4000 4
PFS -125/8 Extension hose Ø125 8000 6
PFS -160/4 Extension hose Ø160 4000 4
PFS -160/8 Extension hose Ø160 8000 6
20181112
Technical data hoseProperties .................. Non-inflammable, suitable for weld-
ing fumes and flue gases. Temperature range ....... -10°C to +90° C.
Technical data other standardsPlastic components ............ PA, PA30%.Aluminium components ..... Anodised.Steel components .............. Black oxidised, chromed or powder
coated. Weight ............................... PR 1500: 9 kg PR 2000: 10 kg PR 3000: 12 kg PR 4000: 15 kg PR 5000: 23 kg PR 7000: 37 kg PR 9000: 52 kg PR 11000: 64 kg
Hose standardPVC coated polyamide fabric with fully embedded spring steel coil. Hose in quality that cope with aggressive chemicals and other hoses with special requirements can be supplied on request, contact Fumex.
Delivery configurationThe arms are supplied partially assembled, including wall bracket, for ease of installation.
The PR arm is also available in an ATEX version, see separate product sheet.
Verkstadsvägen 2, 931 61 SKELLEFTEÅ, Sweden | Tel +46 (0)910-361 80 | Fax +46 (0)910-130 22 | www.fumex.com | info@fumex.se
top related