maritime2
Post on 06-Mar-2016
267 Views
Preview:
DESCRIPTION
TRANSCRIPT
- Available GSA Contract- Available PV Contract
order online www.amronintl.com760 • 208 • 6500
157
- Available GSA Contract- Available PV Contract
KIRBY MORGAN 37 COMMERCIAL DIVER’S HELMETSEE BELOW
500-050 Kirby Morgan 37 w/ bare wire posts
500-051 Kirby Morgan 37 w/ male W.P. conn.
Kirby Morgan 37 Commercial Dive Helmet consists of two major
assemblies: the helmet shell/helmet ring assembly and the neck
dam/neck ring assembly. The fully adjustable SuperFlow™ 350
demand regulator provides an easier breathing gas flow during
peak work output.
The Kirby Morgan 37 also includes a Quad-Valve™ Exhaust System
which retrofits to SL17 A/B, SL17K, and KM37. It’s recommended
for diving in biologically contaminated water. A quick change
communications module, available with either bare wire posts or
a waterproof connector, allows for easy, efficient maintenance of
the helmet’s communications.The KM 37 is configured to receive
the umbilical over the shoulder, in the “B” configuration.
• Steady flow valve
• Auxiliary valve
• Gas supply non-return valve
• Neck Dam/Yoke Assembly
• Low Pressure Plug
• Latch Catch Mechanism
• Quad-Valve™ Exhaust System
• Nose block device
• Silicone oral nasal mask
500-010 SuperLite 17B w/ bare wire posts
500-011 SuperLite 17B w/ male W.P. conn.
KIRBY MORGAN 17B COMMERCIAL DIVER’S HELMETSEE BELOW
The fully tested SuperLite-17B Commercial Diver’s Helmet set the
working standard for the commercial diving industry worldwide.
Many thousands of underwater hours have proved the design to
be dependable, comfortable, and extremely safe. SuperLite-17B is
Commercial Rated™ and has been tested and certified to meet or
exceed all requirements for all governing agencies. It is certified
for use in diving operations world wide.
The Kirby Morgan 17B also includes our Quad-Valve Exhaust
System which retrofits to many of our Helmets. It is recommended
for diving in biologically contaminated water, when you’re
properly trained and qualified, using recommended procedures.
This new exhaust has exceptionally low exhalation resistance
that you must experience to appreciate.
• Steady flow valve
• Auxiliary valve
• Gas supply non-return valve
• Latch catch mechanism
• Water exhaust
• Quad-Valve ™ Exhaust system
• SuperFlow demand regulator
• Nose block device
• Silicone oral nasal mask
Dive HelmetsD
ive
He
lme
ts
Kirby MorganK
irby
Mo
rga
n
158
order online www.amronintl.com 760 • 208 • 6500
- Available GSA Contract- Available GSA Contract
The Helmet Neck Ring design allows for evenly distributed
weighting of the helmet. The chrome plated machined brass
Helmet Ring houses the Latch Catches and provides protection
for the bottom end of the helmet. The diver is also provided with
an externally adjustable chin support. This support, along with
the adjustable neck pad on the locking collar, gives the diver a
comfortable, secure, custom fit.
The Helmet also features the SuperFlow 350 large tube adjustable
demand regulator which provides an easier breathing gas flow
during peak work output. The Helmet is available in the umbilical
over the shoulder, “B” configuration only.
• Head cushion
• Silicone oral nasal mask
• Port weight
• Locking collar latch system
• Quick change modular comm system
• Externally adjustable chin strap
• Adjustable neck pad
• Head dam swing catch
KIRBY MORGAN SUPERLITE 27 DIVING HELMETSEE BELOW
500-040 SuperLite 27 w/ bare wire posts
500-041 SuperLite 27 w/ male W.P. conn.
500-025 18B Band Mask w/ bare wire posts
500-026 18B Band Mask w/ male W.P. connector
500-028 KMB28 w/ barewire posts
500-029 KMB28 w/ male W.P. connector
The fully tested and certified KMB 18B Band Mask may be used in
mixed gas diving as well as shallow water diving. The SuperFlow
adjustable demand regulators provide low inhalation resistance
and high gas flow letting the diver breathe easier and work
harder with less exertion. The KMB 18 now comes standard with
the large tube SuperFlow 350 regulator.
The Side Block Assembly of the KMB 18 receives the umbilical
over the shoulder in the B configuration. New patent pending
Band Mask® Band Keepers™. The Tri-Valve™ Exhaust System
(Patents Pending) has less breathing resistance than the older
single valve exhaust. It retrofits to all previous Kirby Morgan Band
Masks®. The communications connections can be either a male
waterproof plug in type or bare wire posts. The KMB 28B Band
Mask is very similar to the KMB 18. Many parts on the KMB 18B are
interchangeable with the KMB 28B.
The major difference between the 18 and 28 is the material of the
mask frame itself. The KMB 18 has a hand laid fiberglass frame
(yellow) while the KMB 28B (not shown) frame is an extremely
durable injection molded plastic (black).
• Steady flow valve
• Auxiliary valve
• Gas supply non-return valve
• Tri-Valve exhaust whisker
• Silicone oral nasal mask
KIRBY MORGAN 18B & 28B BAND MASKSEE BELOW
Dive HelmetsD
ive
Hel
met
s &
Mas
ksKirby Morgan
Kir
by M
orga
n
- Available GSA Contract- Available PV Contract
order online www.amronintl.com760 • 208 • 6500
159
- Available GSA Contract- Available PV Contract
Dive HelmetsH
elmet A
ccessoriesKirby Morgan
Kirb
y M
org
an
OVERPRESSURE RELIEF VALVE200-017
The KMDSI Overpressure Relief Valve is factory adjusted to vent any time
the pressure in the low pressure hose connecting the bailout bottle to your
emergency valve exceeds 200 P.S.I. It is installed in any of the low pressure
ports in the first stage regulator.
MANIFOLD BLOCK ASSEMBLYSEE BELOW
The Manifold Block Assembly provides a control point for your bailout
supply when using a light weight full face mask like the EXO Mask®. It is
equipped with four low pressure outlets and a check valve. It is available
with a 9/16” O2 fitting or a #6 JIC fitting, or a standard SCUBA fitting.
Fittings
300-150 9/16 O2 fitting
300-155 JIC fitting
300-145 Standard SCUBA fitting
ORIGINAL EXO-26SEE BELOW
Complete, quick change communications assemblies are available with
standard bare wire post connections or male waterproof connector whip.
315-201 Comm. Assy w/posts
315-206 Comm. Assy w/W.P. connector
SUPERLITE 17, 17C & 18/28 COMMUNICATIONS ASSEMBLYSEE BELOW
Original, high quality replacements for the SuperLite 17, 17C Helmet, KMB 18 & 28 Mask communications.
515-030 Communications set
515-005 Right Earphone
515-006 Left Earphone
515-009 Microphone
160
order online www.amronintl.com 760 • 208 • 6500
- Available GSA Contract- Available GSA Contract
WELDING LENS ASSEMBLY525-403This Welding Lens Assembly will fit the SuperLite 17 & 17C,
SuperLite 27, the KMB-18, and the KMB-28. The port retainers are
supplied with two plug screws which are designed to protect the
two threaded holes on the port retainer which are provided for
the welding lens assembly.
KMDSI is proud to announce a large Welding Shield which
covers the whole port area of your helmet or mask, and accepts
a standard 4 x 5 weld glass. This new shield will retrofit to all KMB
BandMasks and SuperLite helmets using the same mounting
holes as the original weld lens assembly.
FOR SUPERLITE-17 A/B, 17C, 17K, 27, HELMETS and KMB-18A/B &
28B BAND MASKS
WELD SHIELD ASSEMBLY525-400
Image courtesy of U.S. Navy
Dive HelmetsH
elm
et A
cces
so
rie
s
Kirby MorganK
irby
Mor
gan
- Available GSA Contract- Available PV Contract
order online www.amronintl.com760 • 208 • 6500
161
- Available GSA Contract- Available PV Contract
INTERSPIRO MK II FACE MASK96319-06
The lightweight Interspiro MKII US Navy MK20 full face mask was designed
for maximum comfort. Perfect for all types of diving, especially for divers
who have to work in hostile diving conditions such as cold and polluted
water. The Interspiro full face mask maintains a constant, slight positive
pressure called Safety Pressure which is activated with the first inhalation.
Safety Pressure prevents water from leaking into the mask. The high volume
fully balanced second-stage regulator provides extremely low inhalation
and exhalation resistance. Interspiro Mask have been U.S. Navy tested
and approved. They are used extensively by military, police rescue, and
professional divers around the world.
• Automatic reserve warning
• Close fitting design
• Main parts have finger-tight fittings
• Silent operational mode
• Low volume dead space facemask
• Fit spectacles, communication devices and add-ons
• Optimum performance from the Arctic to the Equator
• Faceplate Lens
96319-06 Silicone Facemask, Black
OTS-900157-001Silicone Facemask, Gold, Non-pos. pressure
OTS-900157-006Silicone Facemask, Gold, Pos. pressure
KIRBY MORGAN EXO-BR FULL FACE MASK300-036
The EXO Full Face Mask is designed for both surface supplied and SCUBA
diving. Its light-weight design allows divers to work long dives without jaw
or neck fatigue. All models have a modular communications design that
permits rapid and simple maintenance. The optional Hard Shell provides
added surfaces for mounting lights, cameras etc. The ear equalization device
is a nose block which is adjustable to several different heights. The oral nasal
in the Standard and Balanced models help keep the CO2 levels to a minimum
and improves breathing and communications. The “EXO-BR” (Balanced
Regulator) is designed to meet or exceed recommended performance goals
in both SCUBA and surface supplied modes and is CE approved. It meets
and surpasses EN 250 requirements for regulator performance. The EXO-BR
Balanced Regulator helps reduce the work of breathing for the diver. The
regulator balances the intermediate air pressure against the valve sealing
pressure inside the regulator. This enables the regulator to instantly adjust
to changes in line pressure. The regulator is adjustable for a wide range of
intermediate pressures between 100-250 psi.
• EXO Skeleton Frame
• Head Harness
• EXO-BR BALANCED REGULATOR
• Regulator Adjustment
• Oral Nasal Mask
• Mask Seal
• Faceplate Lens
AEA-MT90 Throat Microphone
AEA-TK55 Sniper Ring Finger PTT
AEA-MT21 Microphone
Dive MasksD
ive
Ma
sk
s
Kirby MorganK
irby
Mo
rga
n •
Inte
rsp
iro
162
order online www.amronintl.com 760 • 208 • 6500
- Available GSA Contract- Available GSA Contract
Built for exceptional durability, the Conshelf XIV continues to be
the world’s most popular Military and Professional Operations
regulator.
• World’s most popular military and professional regulator
• Durable, time-proven design
• Chrome-plated, marine brass 1st and 2nd stage
• Available in cold water “Supreme” version
• 1 High Pressure and 3 Low Pressure ports
• Approved for use by U.S. Navy
AQUA LUNG CONSHELF XIV1081-00
1081-00 Conshelf XIV
1088-00 Conshelf XIV, Supreme
1081-95 Overhaul Kit
• Integrated 1st stage and valve
• 36” LP hose with swivel
• Analog dial indicator
• 6.0 cubic foot aluminum cylinder
• Weight: 5.0 lbs (approx.)
AQUALUNG SPECIAL PARASCUBAUNDERWATER DIVING SYSTEM
1083-86
• ANU listed stand by diver safe second
• 39 in. LP hose
• Analog dial indicator
• 6.0 cubic foot aluminum cylinder
• Weight: 5.0 lbs (approx.)
AQUA LUNG CONSHELF XIVOCTOPUS REGULATOR
1082-00
Image courtesy of Ove Hoegh-Guldberg
Regulators & TanksR
eg
ula
to
rs
Aqua LungA
qua
Lun
g
- Available GSA Contract- Available PV Contract
order online www.amronintl.com760 • 208 • 6500
163
- Available GSA Contract- Available PV Contract
Manufacturing
• Built from proprietary aluminum alloy 6061-T6, a balanced
aluminum-magnesium-silicon blend exclusive to Luxfer
• Manufactured to meet all U.S. (DOT) and Canadian (TC)
regulations
• Cycle-tested in excess of 100,000 cycles at service pressure
• Minimum burst pressure tested to 2.5 times service pressure
without failure
Exterior Finish
• Most Luxfer cylinders are painted with durable, premium-
quality powder coatings
• Shot Blast and Brushed No Coat cylinders are not painted,
making them ideal for rental, dive boats, etc.
• Aluminum is highly resistant to external corrosion
Interior Finish
• Aluminum is highly resistant to internal corrosion
Valves
• All Luxfer cylinders sold by XS Scuba include Thermo valves
• Standard inlet thread (3/4”-14 NPSM) allows upgrade to
Thermo PRO valve
• The Thermo PRO valve has a convertible design, allowing for
standard yoke or 230 bar DIN connections
• PRO valves are clean for pre-blended Nitrox up to 40% FO2
XS SCUBA ALUMINUM CYLINDERSSEE BELOW
Models
A06NV-YEL 6 cu ft, Yellow, No Valve
A06-YEL 6 cu ft, Yellow
A030-YEL 30 cu ft, Yellow
A080NV-BLK80 cu ft, Black, No Valve
A080NV-YEL80 cu ft, Yellow, No Valve
A080-YEL 80 cu ft, Yellow
• Self-draining
• Octagon-shaped rim
• Durable molded construction
XS SCUBA CYLINDER BOOTAC725
• 100% 316 stainless steel
• 16 gauge with #4 finish
• Fusion welds, passivated, polished
• Stainless steel mounting hardware
XS SCUBA STAINLESS STEEL CYLINDER BANDSB725
Regulators & TanksT
an
ks
XS ScubaX
S S
cu
ba
164
order online www.amronintl.com 760 • 208 • 6500
- Available GSA Contract- Available GSA Contract
SUUNTO MARINERSUU-SS010932810
The main features of Suunto Mariner include a sailing timer, barometer, compass and watch. Its easy-to-read display with large numerals, backlight, and audible
warning signals let you concentrate more on maneuvering your vessel in
demanding conditions, while Suunto Mariner keeps you informed on up-coming
critical moments. Suunto Mariner features an accurate calendar watch with dual
time, an electronic compass, a barometer as well as a sailing timer especially
designed to meet the timing function requirements before and during a tough
race.
The Suunto Mariner is the most trusted first mate that gives you all
the information you need in one compact package 24 hours a day.
• Time: Calendar, dual time, three daily alarms, stopwatch, countdown timer
• Sail: Sailing timer with audible warning signals
• Barometer: Absolute pressure sea level pressure, last 6 hour pressure trend, 4-day pressure memory, temperature
• Compass: Cardinal bearing, North-South arrow, bearing tracking, start line
bias, declination setting
• Water resistant to 30 m (100 ft)
SUUNTO MOSQUITOSUU-SS005993100
Suunto Mosquito is an advanced wristop dive computer for active water sports
enthusiasts. With complete air and nitrox capabilities and a separate free diving
mode it is suitable for all kinds of diving. In addition to having information
available to you at all times, your Suunto Mosquito records and stores data for
later analysis. You can view, compare, and analyze your diving performance
through a specially designed PC interface.
The technical features, combined with the PC interface developed for more
graphical representation of your performance, and our Internet Community,
where you can share information with other like-minded divers from around the
world, make Suunto Mosquito ideal for divers who want their watch to tell more
than the time.
• Air, Nitrox and Free modes
• Complete watch functions
• PC interface compatible
• User-replaceable battery
• Suunto RGBM model
SUUNTO STINGERSUU-SS005970000
Suunto Stinger has everything a diver can ask for. It is the only wristop computer
in the world with separate Air, Nitrox and Free/Gauge modes, each of which has
a detailed profile memory.
All the advanced features, such as safety stop countdown, adjustable profile
memory sampling rate, underwater stopwatch and bookmarks, are easily
accessible.
• Complete watch functions
• Extensive memory functions
• Adjustable units
• Maximum Operating Depth Planner (Gauge mode)
• Suunto RGBM model
WatchesW
at
ch
es
SuuntoS
uu
nto
- Available GSA Contract- Available PV Contract
order online www.amronintl.com760 • 208 • 6500
165
- Available GSA Contract- Available PV Contract
SUUNTO YACHTSMANSUU-SS010933310
Suunto Yachtsman features an accurate calendar watch with a countdown
timer and dual time display, Suunto´s famous digital compass, a barometer, and
a sailing timer designed to meet the timing requirements before and during a
tough race.
Suunto Yachtsman combines exclusive looks with the rock solid construction.
It is shockproof and waterproof to 30 m (100 ft). The non-allergenic aluminum
casing and the durable mineral crystal glass combined with a weatherproof
leather band make it the ultimate tool for discerning boaters.
• Time: calendar, dual time, three daily alarms, stopwatch, countdown timer
• Sail: Sailing timer with audible warning signals
• Barometer: absolute pressure sea level pressure, last 6 hour pressure trend,
4-day pressure memory, temperature
• Compass: Cardinal bearing, North-South arrow, bearing tracking,start line
bias, declination setting
SUUNTO D3SUU-SS005987808
Suunto D3 is an advanced wristop computer for freedivers and water sports
enthusiasts. Lightweight, streamlined and equipped with versatile dive, time
and alarm functions, it is the state-of-the-art freediving instrument and a perfect
bottom timer and back-up device for SCUBA diving. However, Suunto D3 is not a
dive computer and provides no decompression calculations.
In addition to having information available to you at all times, your Suunto D3
records and stores data for later analysis. You can view, compare, and analyze
your diving performance through a specially designed PC interface.
The technical features, combined with the PC interface developed for more
graphical representation of your performance, and our Internet Community,
where you can share information with other like-minded divers from around the
world, make Suunto D3 ideal for freedivers who take their diving seriously and
aim at reaching their peak.
• Free, Gauge and Watch modes
• 1-second sampling rate (Free mode)
• Countdown timer
• Repeatable dive time alarm
• Maximum Operating Depth Planner (Gauge mode)
• User-replaceable battery
• PC interface compatible
• Optional floating neoprene strap
SUUNTO ANALOG DEPTH GAUGE5254
• Luminous easy-to read analog dials
• Reliable and accurate open bourdon tube mechanism
• Maximum depth indicator
• 0-230FT, 0-5000PSI
Watches & GaugesW
at
ch
es
& D
ep
th
Ga
ug
es
SuuntoS
uu
nto
166
order online www.amronintl.com 760 • 208 • 6500
- Available GSA Contract- Available GSA Contract
Like the tailfin of a Humpback whale, SCUBAPRO’s Twin Jet Fin uses a split
hydrofoil shape to deliver more forward motion with less effort. A whole lot
more kicking power with a whole lot less effort and drag: check out a Humpback, its “twin jet” tail can lift a mega-ton! As a result, the Twin Jet Fin is the fastest fin ever tested.
• Patented split-fin propeller technology. Proven to deliver more forward
motion with considerably less effort than traditional blades.
• Drag-reducing vents. Substantially decrease resistance on both up and
down strokes.
• Extended soleplate. Acts like a lever to enhance power stroke.
• Extra-wide foot pocket. Ideal for wearing with a dry or semi-dry suit.
• Quick-connect swivel buckles
• Black -Molded from a stiffer compound than other colors. Offers a more
traditional feel. Slightly negative buoyancy
• Graphite and Cobalt
-Softer, lighter, more flexible compound to achieve optimal efficiency
with minimal effort. Slightly positive buoyancy
• Hi-Viz™Yellow
-Softer compound like graphite and cobalt in extremely vibrant color
to afford the greatest visibility underwater. Slightly positive buoyancy
SCUBAPRO TWIN JET FINS, ADJUSTABLESEE BELOW
Part No. Size
25.385.200 Small (6-8)
25.385.300 Medium (8-10)
25.385.400 Large (9-12)
25.385.500 X-Large (11-13)
• Long history of performance. Considered the standard for power and durability since 1965
• Proven vented design decreases drag on the upstroke; enhances thrust on the downstroke
• Adjustable heel strap. Secures strap for ease of pre-dive preparation
SCUBAPRO JET FINSEE BELOW
Part No. Size
25.351.000 Medium (7-8)
25.350.000 Large (9-10)
25.352.000 X-Large (11-12)
25.352.100 XX-Large (11-13)
• A classic favorite• Popular among dry suit divers because of the large foot
pocket• Unique rubber compound allows greater efficiency by
reducing weight• Black rubber only
XS SCUBA TURTLE FINSFN305
FinsFi
nsScubapro
XS
Scu
ba •
Scu
bapr
o
- Available GSA Contract- Available PV Contract
order online www.amronintl.com760 • 208 • 6500
167
- Available GSA Contract- Available PV Contract
• Integrated 1st stage and valve
• Swivel assembly has built in safety relief
• LP hose with QD fitting mates to most dry suit valves
• 5.0 cubic foot aluminum cylinder
AQUA LUNG IMPULSE 2 SNORKEL7337-60
The Mako is a high performance personal dive vehicle
utilizing the latest in motor and battery technologies to
deliver startling speed and run time statistics, extending
dive time and range. It’s a whole lot of fun as well
• Up to 2-hour run time
• Variable pitch propeller
• Conserves air by virtually eliminating exertion
• Green, yellow and red LED battery indicator
• Includes battery and charger
OCEANIC MAKO DIVER PROPULSION VEHICLE MAKO-DPV
• New Aqua Lung exclusive Hands-Free Fin Release Strap for quick removal with a
kick of your heel
• Significantly outperforms traditional composite fins
• Produces maximum thrust and lateral stability
• Combination of polymer plastic for stability with rubber for flexibility
• Quick-release, quick adjusting buckles.
AQUA LUNG BLADES 26268-90
Black - HF
6268-80 Small
6268-90 Regular
6269-00 Giant
• Light weight rubber compound
• Neutrally buoyant
• Larger foot pockets
• Extended foot pocket provides better leverage
• Two molded reinforced holes for tethering options
• Replaceable heavy duty stainless steel buckles
AQUA LUNG ROCKET FINSEE BELOW
6211-00 Rocket Fin, Original Metal Buckles
6211-10 Rocket Fin, Quick Release Plastic Buckles
6216-10 Super Rocket, Quick Release Plastic Buckles
6211-30 Rocket Fin II, Original Metal Buckles
Spares
6211-31 Metal Buckle Kit for Rocket II
6211-32 Rocket II Replacement Strap
FinsAqua Lung
FinsA
qu
a L
un
g
168
order online www.amronintl.com 760 • 208 • 6500
- Available GSA Contract- Available GSA Contract
UNDERWATER KINETICS MINI Q40 DIVE LIGHTSEE BELOW
The high intensity Mini Q40 eLED is lightweight enough
to attach to your mask strap for hands free illumination of
gauges and marine life.
• Works well as a photographers spotting light. Fits
Sea & Sea, Ultralight and other camera mounting
adapters
• Tough, non-corroding ABS and polycarbonate
plastic construction.
Part Numbers
UWK-14512 Mini Q40 (Clam Pk) Yellow
UWK-14515 Mini Q40 (Clam Pk) Black
UNDERWATER KINETICS LIGHT CANNON 100UWK-44601
Utilizing the latest HID lighting technology, the Light
Cannon emits a beam of light as white as the Sun
and penetrates water farther than any conventional
halogen or xenon dive light.
• New miniature HID lamp gives a giant leap in
brightness with no increase in battery usage
• High color temperature gives the beam the same
color as sunlight
Specifications
Power 10 watts
Lamp HID Metal Halide (6000 degrees K)
Luminous Flux450 lumens
Burn Time 3-4 hours (alkaline batteries) 2 hours (UK NiCad Pack)
Battery 8 x Alkaline C-cell, NiMH or Nicad Cells, UK NiCad Pack
Size 3.2 inch diameter x 8.2 inch
Weight 44 oz.
Specifications
Power 2.1 watts (38 Lm average)
Lamp High brightness xenon filled
Burn Time 4-5 hours
Battery 4 x alkaline AA-cells
Size 6.1 x 1.6 x 1.4 inch
This outdoor and marine survival light is designed to
be a real lifesaver. It operates on a single AA battery &
floats head up in water. Clipped to your body or gear, the
AQUA STROBE is sure to get the attention of emergency
services throughout the world. AQUA STROBE Includes:
Alkaline Battery, Velcro Strap & Lanyard.
PRINCETON TEC AQUA STROBETEC-AS-10-NY-CP-USA
TEC-AS-10-BK-CP-USABlack
TEC-AS-10-NY-CP-USAYellow
TEC-AS-10-RR-CP-USARocket Red
Ideal for personal flotation device and immersion suits.
Xenon strobe provides 250,000 peak lumens. Operates
over 8 hours on standard AA batteries.
• Large sliding switch allows for easy operation by
gloved hands
• Designed as “electronic flare” to replace day/night
pyrotechnic signal in aviation life rafts
• Stainless steel retainer securely attaches removable
battery door to case
ACR MULTI-FUNCTION SEARCH AND RESCUE STROBE
I921LTE-00-NAV
Lights & StrobesS
tr
ob
es
Princeton TecP
rin
ce
ton
Te
c •
AC
R •
Un
derw
ater
Kin
etic
s
- Available GSA Contract- Available PV Contract
order online www.amronintl.com760 • 208 • 6500
169
- Available GSA Contract- Available PV Contract
The SEAL Pup features a partially serrated, scratch-
resistant, powder coated blade that is extremely sharp
and durable. Its lightweight, glass-reinforced Zytel
handle contains a unique diamond pattern for a secure,
no-slip grip. The SEAL Pup can be securely carried in its
waterproof Kydex Groove™ sheath.
SOG - SEAL PUPSOG-M37
Specifications
Blade Length4.75” x .160”
Weight 5.0 oz
Overall 9”
This traditional piece of equipment manufactured to rigid
U.S. Navy specifications. It has a 7” stainless steel blade
with a clear Maple handle. The knife screws into the top
1/2” of the polished cast brass sheath using Acme threads
which not only hold it securely in the sheath but also
permit it to be easily and quickly removed. The upper
edge of the knife blade is cut with saw teeth while the
lower edge is a conventional knife edge. The belt strap is
top grain leather.
DESCO DIVERS KNIFE29228
• 7 in. serrated blade
• Stainless steel butt cap
• Plastic sheath
AQUA LUNG MASTER KNIFE4226-00
Specifications
Blade Length7.25” x .230”
Weight 12.8 oz.
Overall 12.25”
The SOG SCUBA/Demo’s 7.25 inch, AUS 8 steel blade is a
rugged .230 inches thick and is double-edged, featuring a
unique full-serration along the spine.
SOG - SCUBA/DEMOSOG-SSD89
Knives & ToolsK
niv
es
SOGA
qu
a L
un
g •
De
sc
o •
SO
G
170
order online www.amronintl.com 760 • 208 • 6500
- Available GSA Contract- Available GSA Contract
COLD STEEL SRK38CK
Survival/Rescue operations demand a versatile knife able
to withstand extreme abuse. The SRK was designed with
this in mind. The 3/16 in. thick blade features a strong
clip point that’s hand honed to a superb edge that is hair
flinging sharp.
ONTARIO KNIFE MK3 NAVY KNIFEONT-6141
Includes molded high-impact plastic sheath equipped
with brass belt hanger and loop.
Specifications
Blade SteelBlack Oxide 440A Stainless Steel
Edge TypeStraight w/Sawteeth
Handle MaterialMolded High-Impact Plastic
Length Blade6 1/2 in.
Overall Length10 3/4 in.
The SOG SEAL Knife 2000 is perhaps one of the most
dramatic fixed blades on the market. The SEAL Knife
2000 can be securely carried in its waterproof Kydex
sheath.
SOG - SEAL KNIFE 2000SOG-S37
Specifications
Blade Length7” x .25”
Weight 12.8 oz
Overall 12.25”
The Tigershark’s characteristics translate into a full range
of capabilities including: aggressive cutting, superior edge
holding ability, and maximum comfort. Tigershark seeks to
offer the ultimate realization of what a large bowie can do.
SOG - TIGERSHARKSOG-S5
Specifications
Blade Length 9” x .250”
Overall 14”
Weight 17.3 oz
Knives & ToolsK
niv
es
SO
G •
On
tari
o K
nif
e •
Co
ld S
tee
lSOG
- Available GSA Contract- Available PV Contract
order online www.amronintl.com760 • 208 • 6500
171
- Available GSA Contract- Available PV Contract
Specifications
Part No. Model Penetration (in.)
Max Lift (lbs.)
Tool Weight (lbs.)
Dimensions (in.)
20105 100 1/8 100 3.5 3-1/2 x 5
20125 250 1/16 250 5 5-1/4 x 5
20130 450 1/8 400 8 5-1/2 x 6
20115 600 1/8 600 10 6 x 7-3/8
Repair Kits
Part No. Description
20141 Small Handle Repair Kit* for Cub and Model 250
20142 Large handle Repair Kit* for Models 400 and 600
Replacement Parts
20102 Springs for Cub, 250 and 400
20113 Springs for Model 600
20105-4 Handle Pin (all models)
*Handle kits include handle with bushing installed and handle pin.
MAGNETIC HANDLESSEE BELOW
BROCO ® OXY-ARC CUTTING TORCH
BR-22
The BR-22 is designed to significantly
minimize electrolysis. Interchangeable
collets accommodates 3/8” or 1/4”
diameter cutting rods which also allow
the torch to be used as a welding
electrode holder.
BROCO ® BR-20WELDING STINGER
BROCO ® HIGH VOLUME OXYGEN REGULATOR
HVR-4401
The HVR-4401 is multistage and assures
smooth flow at high volume.
BR-20
The Broco Welding Stinger head
and handle are made of lightweight
high-impact thermoplastic. Accepts
a wide range of electrode diameters,
the BR-20 meets MIL-H-865D and is
approved for Navy Use (ANU).
Ordering Information
UW-CS-1 1/8” O.D. x 14” L(8 lb. tube contains 96 rods)
UW-CS-2 5/32” O.D. x 14” L(8 lb. tube contains 72 rods)
SOFTOUCH MILD STEEL WELDING ROD
SEE BELOW
For wet welding mild steel and select
low alloy steel. Meets or exceeds
AWS E70XX specifications for
underwater welding and is approved
for Navy Use (ANU).
Ordering Information
3818UW-253/8” O.D. x 18” L (25 lb. box contains 66 rods)
3836UW-253/8” O.D. x 36” L(25 lb. box contains 31 rods)
ULTRA-THERMIC CUTTING RODSEE BELOW
Cuts ferrous or nonferrous metals,
concrete, or rock. Readily ignited
underwater, the rod will continue to
burn without power until the oxygen
supply is turned off. Works with any
cutting torch.
Ordering Information
UW-EZ-1 1/8” O.D. x 14” L (8 lb. tube contains 96 rods)
UW-EZ-2 5/32” O.D. x 14” L (8 lb. tube contains 72 rods)
High deposition, all position,
electrode is easy to light, easy to run
(a controllable puddle with rippled
bead appearance) and easy to clean.
Meets AWS D.3.6 for underwater
welding Type “B” welds.
EASYTOUCH WET WELDINGSEE BELOW
BROCO ® UNDERWATER CUTTING & WET WELDING ELECTRODES
Knives & ToolsTools
BrocoB
ear Paw • B
roco
172
order online www.amronintl.com 760 • 208 • 6500
- Available GSA Contract- Available GSA Contract
The Amcom I is a small compact one diver radio packed with 22
watts of audio power and many versatile features to give you
many years of service. The Amcom I is available in a rechargeable
version (2810A) complete with the new and improved Amron
2823-602 External Charger with Gel-cell battery or a non-
rechargeable version (2810A-1) with standard lantern type
batteries. Small enough to fit in your gear bag and priced to
fit your budget. No diver should be without an Amcom I for back-
up or primary communications!
• Available in rechargeable & non-rechargeable models
• LED battery indicator
• Enough audio power to support two divers
• Molded co-polymer case with O-ring seal for protection
• External 12VDC power connection
• Independent diver and tender controls
• All connections on side of case for remote operation with lid
closed
• Black powder coated panel with easy to read white graphics
• Flip-latch battery compartment with O-ring seal
• 2 and/or 4 wire operation standard
• Tape Record Jack is standard
2810A REAR VIEW
Specifications
Power 12VDC
Audio Power Output 22 Watts per channel
Frequency Response 300Hz to 12kHz
Weight 2810 7 lbs.
Weight 2810-111 lbs.
Dimensions 6.75” H x 8.625” W x 6.25” D
Power Options
Non-rechargeable (2810A-1)
2 ea. 6VDC screw-top dry cell batteries configured to 12VDC.Expected life: 30 hours
Rechargeable(2810A)
1 ea. 12VDC slide terminal Gel-cell battery Expected life: 50 hours
2810A FRONT VIEW
2810A PANEL VIEW
Non-Rechargeable (2810A-1)
Shipped ready to use with two 6-volt dry cell screw top batteries and manual.
Rechargeable (2810A)
Shipped ready to use with a 12VDC rechargeable Gel-cell battery, external charger and manual. The unit can be left on charge indefinitely without damage zto the batteries or communicator. The communicator can be operated directly from the charger where AC power is available.
2810A-1 Amcom I w/ non-rechargeable batteries
2810A Amcom I w/ rechargeable batteries
Accessories
2460-28 Amron Headset w/ Dual Banana Plugs
2401-28 Heavy Duty Headset w/ Dual Banana Plugs
2405-28 Hand-held Push-to-Talk Microphone
2821-28 Push-to-Talk Module w/ 25 ft. cable 2 wire mode
2822-28 Walk-and-Talk Module w/ 25 ft. cable 4 wire mode
2890- 05 Rechargeable Battery for 2810A (1 required)
2890- 01 Lantern Battery for 2810A-1 (2 required)
2810A- FS Field Spares Kit
AMRON MODEL 2810A AMCOM 1-DIVER RADIO2810A
CommunicationsR
ad
ios
Amron
Am
ron
- Available GSA Contract- Available PV Contract
order online www.amronintl.com760 • 208 • 6500
173
- Available GSA Contract- Available PV Contract
The Amcom™ III has all of the same features of our Amcom II series
communicators. These superior radios utilize separate volume
controls for each diver and the tender, both, for the uplink and
down-link paths.
• New weatherproof panel microphone for great voice
intelligibility
• Available in AC power with automatic battery back-up
• LED battery indicator
• Enough audio power to support three divers
• External 12VDC power connection
• Independent diver and tender controls
• Hand-held push-to-talk microphone
• Remote Walk-and-Talk belt module (optional)
• Tape Record Jack
• 2 and/or 4 wire operation standard
• Ability to use both dynamic and pre-amplified diver
microphones with a unique circuit that detects microphone
type and automatically adjusts volume levels
2830A/24 Amcom 3-Diver Radio, AC Powered
2830A/24/28FDW 2830A w/ Wireless Tender
2830A/24/26 2830A w/ Analog Helium Speech Unscrambler
2830A/24-MS 2830A - Military- w/ MS Connectors
2830A/24/28FDW-MS2830A w/ Wireless Tender - Military - w/ MS Connectors
2830A/24/26-MS 2830A Helium UnscramblerMilitary - w/ MS Connectors
Accessories
2460-28 Amron Headset w/ Dual Banana Plugs
2829-01 Remote Wireless Kit w/ Case, RemoteTransceiver, Headset & Charger
2821-28 Push-to-Talk Module w/ 25 ft. cable (2-Wire Mode)
2822-28 Walk-and-Talk Module w/ 25 ft. cable (4-Wire Mode)
2405-28 Replacement Hand-held Push-to-Talk Microphone
2890-05 Replacement battery (1 required)
28XXA-FS Field Spares Kit
2830A/24 3-DIVER RADIO W/ AC POWER OPTION
Specifications
Power 110/220 VAC 50/60 Hz (automatic), or internal/external batteries 12 VDC
Audio Power Output22 Watts per channel
Frequency Response300Hz to 12kHz
Isolation TransformerSplit Bobbin
Backup Battery12VDC, Slide terminal Gel-cell (1 ea.)
Expected Battery Life20 hours
Height 9 in (22.9 cm.)
Width 14.5 in (36.8 cm.)
Depth 10.0 in (25.4 cm.)
Weight (approx.)22 lbs. (9.98 kg)
2830A/24/26 3-DIVER RADIO WITH HELIUM UNSCRAMBLER
2830A/24/28FDW-MS 3-DIVER RADIO, MILITARY MODEL
AC Power
With automatic battery backup power. Rechargeable Gel-cell type battery automatically recharges while operating the unit. The voltage is automatically selectable for 110 or 220VAC, 50 or 60Hz, with built-in isolation transformer. Shipped complete with backup batteries and manual.
AMCOM 3-DIVER PORTABLE RADIOS2830A
CommunicationsR
adiosAmron
Am
ron
174
order online www.amronintl.com 760 • 208 • 6500
- Available GSA Contract- Available GSA Contract
The Aquacom® SSB-2010 diver transceiver is a 5 watt,
multi-channel single sideband underwater telephone
designed with the Professional Search & Rescue Teams
in mind. The SSB-2010 can be configured to operate with
virtually any style full face mask (ffm) or mouth mask. With
the addition of a CDK-6 Surface Accessory Kit, the SSB-
2010 is easily converted into a portable surface station.
Standard features are: Voice Operated Transmission (VOX),
Push-to-talk control (PTT ), Squelch, 4 channels, Earphone
volumes, Voice menu (the user can easily adjust the SSB-
2010 underwater), removable transducer, and heavy duty
design. This system is tough, powerful and a must for any
serious Search & Rescue Team.
OTS AQUACOM® SSB-2010 TRANSCEIVEROTS-900272-000
Specifications
Nominal RangeCalm sea: Greater than 1,000 meters
Transmitter Band 31 to 33 kHz
Audio Frequency Response
300-4,000 Hz
Receiver Sensitivity -110 dBv
Acoustic Output Power 3 watt (PEP) (176.4 dB re 1 uPA at one meter
Auto. Gain Control (AGC)
120 dB dynamic range
TransducerPiezoelectric type
Transmitter Activation Voice operated transmitter (VOX) or manual activation (PTT)
Battery Type 8-AA Alkaline cells or opt. RB-10A NickelCad pack or NiMH
Battery Life 12 hrs. on AA Alkaline, 10% duty cycle, 6hrs Nicad, 13 hrs. Metal Hydride
Low Battery Indicator Flashing Red LED on upper housing (also indicates power is ON)
Housing DimensionsHeight: 7.60” , Width: 3.55” , Depth: 1.80”
Channels
1 = 32.768 kHz upper sideband
2 = 32.768 kHz lower
sideband
3 = 31.250 kHz upper sideband
4 = 31.250 kHz lower sideband
Compatibility Chart
XT-100 RX-100 SSB-1001B EMA-2
XT-100-H SP-100 CDK-6 Kit EMX-2B
SCU-BUD/S OR-BUD/S STX-101/M EMX-2
TEC-BUD SSB-2001BMTS-BUD/S RCL-7A
The CDK-6 Surface Accessory Kit is designed to convert
an SSB-2010, SSB-2001B, or SSB-1001B into a portable
surface station. The kit consists of one deluxe headset
with boom microphone (OTS-910019-007) and a 55’
transducer cable (OTS-910017-000) including connectors.
The CDK-6 is perfect for fast response and when space is
an issue. Many Team Leaders utilize the CDK-6 in small
craft operations.
OTS CDK-6 SURFACE ACCESSORY KITOTS-900015-007
CDK-6 Surface Accessory Kit (900015-007) Specifications:
Microphone Noise canceling, 150 ohm. (boom mic on headset)
Frequency Range 30 to 35 kHz
Cable 55 ft with male & female amp connectors
Earphone Dual earphone headset with boom mic
Push-to-Talk (PTT)
Installed on one side of the earphone muff
CDK-6 Compatibility Chart
SSB-2010
SSB-2001B
SSB-1001B
CommunicationsT
ra
ns
ce
ive
rs
Oc
ea
n T
ec
hn
olo
gy
Sy
ste
ms
OTS
- Available GSA Contract- Available PV Contract
order online www.amronintl.com760 • 208 • 6500
175
- Available GSA Contract- Available PV Contract
Nominal Range100 yards voice, 300 yards tone
Frequency Range 500 - 4,000 Hz
Input Current/Voltage 7 amps max / 24 VDC
Audio Power Recall & Tone 132 Watts, Voice, adjustable upto 132 Watts
Idle Current275 Ma
Microphone Handheld, PTT
TransducerLubell (anodized aluminum)
Battery Life5 hours at 20% duty cycle (recall/tone) 3hours with aux. input
Battery Type(2) 12 volt 2.6 amp hours (RB-30)
Low Battery AlarmLED flashes at ~20 volts
Housing Dimensions6.5” H × 14” W × 10.6” D, Weight 15 lbs.
10-watt, 8-channel single sideband surface underwater
telephone designed for Military and Government use.
The dive supervisor will have total communication
control with all free swimming scuba divers that are
equipped with SSB-1001B Diver transceivers. U.S. Navy
Approved.
OTS AQUACOM® STX-101M TRANSCEIVEROTS-900281-001
Specifications
Nominal RangeCalm seas: Greater than 1,500 meters.Sea State 6: 200 meters
Frequency Range30 to 35 kHz
Audio Bandwidth300 Hz to 3,500 Hz
Automatic Gain Control 120 dB dynamic range (AGC)
Acoustic Output Power 10 watts (nominal)
Microphone/Speaker Hand Held , dynamic, 200 ohm./Heavy duty front panel speaker with On/Off control
TransducerPiezoelectric type on a 55’ cable
External Power12 volt, DC @minimum of 4 amps
Battery Type & Life Supplied with (2) RB06V rechargeable batteries. 20 hours continuous use assuming 10% duty cycle
Squelch User adjustable from the front panel
Receiver Sensitivity Greater than 100 dBv
Housing Dimensions D: 10.60”, W: 14.00”, H: 6.500”, Weight: 12.5 lbs. w/batt. Housing U/K 603
STX-101 Channels (Single Sideband)
1 = 32.768 kHz upper
2 = 32.768 kHz lower
3 = 31.250 = kHz upper
4 = 31.250 = kHz lower
Compatibility Chart
XT-100 Buddy Phone® RX-100 Buddy Phone®
XT-100-H Buddy Phone® TEC-BUD Buddy Phone®
SCU-BUD/S Buddy Phone® SP-100D Buddy Phone® Digital
MKII-BUD/S Buddy Phone® STX-101 Aquacom®
SSB-1001B Aquacom® SSB-2010 Aquacom®
RCL-7A Multi Battery Charger STX-100 Buddy Phone®
SSB-2000/1 Aquacom® SSB-1000D Aquacom®
SSB-1000S Aquacom®
The system comes complete with a high-quality hand-held
microphone, transducer with 25’ of cable, rechargeable
batteries, battery charger and main electronic unit. The
DRS-100B is a must of all diving operations!
The DRS-100B Diver Recall/Hydrophone system is U.S.
Navy approved and used by Special Warfare units around
the world. The DRS-100B is a dive supervisor’s best friend,
allowing him to recall free-swimming divers. It will alert all
divers within range with either voice, solid or intermittent
tones. The DRS-100B also offers a listening mode which is
great to hear marine biological
and/or man-made noise.
OT S DRS-100B DIVER RECALL/ HYDROPHONE
OTS-900097-000
CommunicationsR
ad
ios
Oc
ea
n T
ec
hn
olo
gy
Sy
ste
ms
OTS
top related