measurement and control of slip in a continuously variable transmission

1 of 22

Measurement And Control Of Slip In a Continuously Variable Transmission

B. Bonsen, T.W.G.L. Klaassen, K.G.O. van de Meerakker

M. Steinbuch, P.A. Veenhuizen

2 of 22

CVT• Infinite number of ratios within a range• Shifting while engaged• Optimal use of IC engine

3 of 22

CVT

4 of 22

Slip

• Friction drive

• Slip between belt and pulley

• Wear

• Clamping force

5 of 22

Efficiency

• Actuation losses

• Friction in Belt

• Bearing losses

• Lubrication

6 of 22

Project goals

• Optimize CVT transmission efficiency by:

– using alternative actuation system

– lowering clamping force

7 of 22

Lowering clamping force

• Advantage:– Less friction losses in the belt– Less actuation power – Less friction in the bearings– More torque on the wheels

• Disadvantage:– Increased risk of damage due to slip

8 of 22

Measurement of slip

• Definition of slip

• Measurement of

• Calculation of

9 of 22

Testrig

10 of 22

Slip & Efficiency

11 of 22

Slip & Friction

12 of 22

Linearizing

13 of 22

Variator model

14 of 22

Nonlinear model

15 of 22

Linearized model

16 of 22

Eigenfrequencies

17 of 22

Control

• Clamping force

• Ratio

• Speed

18 of 22

Slip feedback

Fp

s

rg

re f+

-

Td

19 of 22

Clamping force

• Safety

• Actuation bandwidth

• Slip measurement

20 of 22

Stability using slip feedback

21 of 22

Experimental Results

22 of 22

Conclusions

• Stable control of slip

• Robustness for torque peaks up to 30Nm

• Lower clamping force (-30%)

• Higher variator efficiency (+4%)