micro assign
Post on 26-Jun-2015
91 Views
Preview:
TRANSCRIPT
MICROCONTROLLER
ASSIGNMENT
BABAK DANYAL AWAN
10-BEIT-29
11/14/2012
COUNTS NO OFF PERSONS ENTERED IN A BUILDING AND DISPLAY IT ON LCD
In this switch is used instead of laser diodes both perfoming the same functionality generating interrupts when a person passes (switch is active)And display the total no of persons entered in a building where this circuitry is applied
CIRCUIT DIAGRAM
CODING
COPY DATA FROM ONE PORT TO ANOTHER
In this it receives data from portc and copy it to port be
CIRCUIT DIAGRAM
CODING
COPY INVERTED DATA FROM ONE PORT TO ANOTHER
In this it receives data from portC and copy INVERTED data to portB
CIRCUIT DIAGRAM
CODING
DISPLAY KEY PRESSED ON LCD
By using keypad, whenever the key pressed that particular key is being displayed at the LCD
CIRCUIT DIAGRAM
CODING
}
CONTROL ROTATION OF DC MOTOR BY SWITCH
With the help of two switches we control the direction of the motor so that it can rotate clock wise or anticlock wise
HARDWARE
CODING
ON OFF LED BY DELAY
HARDWARE
CODING
PRESSUR CONTROLLER
IT WILL SENSE A PRESSURE AND MAKE MOTOR ACTIVE BUT IN THIS SENSOR IS REPLACED BY A SWITCH TO PERFORM THE SIMILAR FUNCTIONALITY
HARDWARE
CODING
CODING
CODING
OUT A BYTE OF DATA MC & LSB SHOULD GO FIRST
HARDWARE
CODING
OUT A BYTE OF DATA MC & MSB SHOULD GO FIRST
HARDWARE
CODING
IN A BYTE OF DATA MC & MSB SHOULD GO FIRST
HARDWARE
CODING
top related