miniature circuit breakers (mcbs) - ship switchgears circuit breakers (mcbs) the circuit breaker...
Post on 08-Mar-2018
235 Views
Preview:
TRANSCRIPT
Miniature Circuit Breakers (MCBs) The circuit breaker plays an important role in providing over-current and short-circuit
protection and a disconnect means in electrical networks. A breaker is a device
designed to isolate a circuit during an over current.
Ship Switchgears is leading manufacturer of Miniature circuit breakers and offering
wide range of MCBs from 0.5A to 63A rating.
Construction and Features:
High performance in a small package
Full Range ISI Marked
High Breaking Capacity
Big Terminal Design suitable for Copper / Aluminum cables
Shock proof
Protection IP-20
Incoming Terminals suitable for dual termination i.e. Comb busbar & cable can be terminated simultaneously.
Longer life
Energy saver
Ratings:
6 – 63 (B Type)
0.5 – 63 (C Type)
0.5 - 63 (D Type)
Configuration:
SP
SPN
DP
TP
TPN & FP
Rated Voltage:
240/415 AC
Upto 110V DC
Breaking Capacity:
10kA
Conforms to:
IEC 60898-1
IS / IEC 60898-1
ISOLATORS:
Isolators:
SP, DP, TP & FP Version as per IS 13947 (Part-3) & IEC 60947 – 3
IS / IEC 60947-3
Ratings:
40A, 63A, 80A, 100A
Rated Voltage:
240 / 415V AC
Rated Insulation Voltage:
500V
Ordering Code:
MCB
Isolator
Residual Current Circuit Breakers (RCCB)
The flow of current through electrical facilities always involves risks. Poor insulated
equipment, faulty wires and incorrect use of an electrical device cause currents to flow
through the wrong path through the insulation to the earth. This is called to ‘Leakage
Current’. Earth leakage is responsible for electrical shocks. Earth leakage can be
prevented by Residual Current Circuit Breaker (RCCB), also known as Earth Leakage
Circuit Breaker (ELCB).
Ship Switchgears is leading manufacturer of Residual Current Circuit Breakers and
offering wide range of RCCBs from 16A to 63A rating with sensitivity current
30mA/100mA/300mA.
Construction and Features:
Protection against Direct contact / Indirect contact
Fire hazards
Independent Voltage device
Advance Neutral feature incorporated
Protection against nuisance tripping
Incoming Terminals suitable for dual termination i.e. Comb busbar & cable can be terminated simultaneously
Short circuit withstand capacity upto 6kA/10kA (with SCPD)
ISI Marked
Ratings:
IS:12640(Part-1):2008, IEC:61008-1
Sensitivities: 30mA,100mA,300mA
Configurations:
2 pole & 4 pole
Rating:
16A to 63A
Rated Voltage:
240/415VA.C.
Rated Insulation Voltage:
500V
Short circuit withstand capacity:
6kA / 10kA With SCPD
Ordering Code:
SELCB
Moulded Case Circuit Breakers (RCCB)
Technical Features: SHIP Moulded Case Circuit Breakers (MCCBs) are designed for circuit protection for low
voltage distribution system. MCCBs are suitable for protection of Main branch and feeder circuit
& connected equipments / load.
SHIP MCCBs provide fixed type overload and short circuit protection for all circuit elements. It is
designed for use in Switchboards, Control Panels and in separate enclosures to meets the
requirements of lighting, distribution and power circuits. Trip Free Mechanism - The MCCB trips
internally in case of fault, even if the knob is in the ON position
SHIP SWITCHGEARS offers a comprehensive range of MCCBs in world class technology and
fully conforms to the latest standards IEC-60947-1&2 / IS-13947-1&2.
The insulating Housing & Cover made of high strength, heat resistant, flame retardant resin
bonded thermo setting material which provides Interphase insulation of a high dielectric strength
and high withstands capacity against thermal and mechanical stresses. Protection against
secondary fire hazards and increased safety of operating personnel.
Ratings:
TP – 63A to 630A, FP- 63A to 630A
Rated Voltage:
415V AC
Breaking Capacity:
25kA, 35kA, 50kA
Rated Impulse Withstand Voltages:
8kV
Ref. Specification:
IS 13947-2, IEC 60947-2
Ordering Code:
SMCCB
MCB Distribution Boards
Ship Switchgears mission is to meet customer’s expectations by providing satisfaction through cost, quality, service, delivery and continuous improvement.
Ship MCB Distribution Boards are the basis for development and growth in meeting all the needs for a residential, commercial, and infrastructure segments.
The wide range of Distribution Boards enables each customer to select an individual and economical configuration according to his requirements and satisfaction.
SHIP MCB Distribution Boards have been designed using the latest available technology and conforms to the latest standards: IS 13032, IEC 439-1 & 3 and BS EN
60439-1 & 3.
Construction and Features:
Available in single / double door
Masking - (Cement & Water guard) - This arrangement keeps water and cement
dust away during construction
Flexibility during installation - The entire door need not be dismantled thus saving
valuable installation time
Also ensures that electrically live parts do not get exposed.
Reversible Doors - Doors can be reversed and fitted on to the right side also by
the user
Weather proof design - Perfect fitted gaskets which ensure ingress protection as
per IP-42 category
Suitable for flush and surface mounting
Enclosure made from CRCA sheet steel duly pretreated & powder coated
Type / Series:
Single Door, Double Door, Whiteline, Euro line, Euro Supreme, Plastic
Enclosure, Vertical design, Consumer Unit and Rotary type MCB distribution
boards.
Range:
SPN / TPN
Configuration:
4Way / 6Way / 8Way / 10Way
12 Way / 16 Way
Rated Voltage:
240 / 415V
Rated Insulation Voltage:
660V
Ordering Code:
One to Six poles Single door in sheet steel enclosure – SSP
One to Four poles Single door in plastic enclosure. – SPE
One to Six poles Plastic enclosure with acrylic window – SWPE
TPN Single door in sheet steel enclosure - SENT
Euro line SPN / TPN Double door sheet steel enclosure - SELS / SELT
Euro Supreme SPN / TPN Double door sheet steel enclosure - SESS / SEST
Super line SPN / TPN Double door sheet steel enclosure - SSLS / SSLT
White line SPN / TPN Single door sheet steel enclosure. - SWLS / SWLT
Consumer unit - SCU
Vertical type TPN DBs - SEVT
Rotary type DBs - SRD
TPN Double door in sheet steel enclosure – SSLTI
On-Load Change Over Switches
Ship Switchgears is leading manufacturer of ON-Load Change over Switches with
Front Handle operation with wide application in all industrial and residential where
individual system required safe and reliable transfer of power supply from main to
standby supply and vice-versa. Wide range available from 63A to 630A.
Construction and Features:
Compact in size
Quick make & Break operation
High electrical & mechanical endurance
Advance neutral design
Enclosed housing to avoid dust ingress
Double break contacts per pole
Load and Line reversibility
Door interlock and padlock facility, telescopic operating shaft
Available in open execution and sheet steel enclosure
Enclosure made from CRCA sheet steel duly pretreated & powder coated
Conforms to:
IS / IEC 60947-1 & 3.
IEC 60947-1 & 3.
Rating:
40A to 1000A
Configuration:
FP with Advance Neutral
Rated Voltage:
415V A.C.
Utilization Category:
AC-23A
Rated Insulation Voltage:
660V
Ordering Code:
SOCO
Off-Load Change Over Switches
Ship Switchgears is leading manufacturer of OFF-Load Change over Switches with
side Handle operation with wide application in all industrial and residential where
individual system required safe and reliable transfer of power supply from main to
standby supply and vice-versa. Wide range available from 32A to 800A.
Construction and Features:
Porcelain terminal blocks upto 63A rating are provided for cable termination
having excellent mechanical, thermal and dielectric properties
Above 63A ratings are also available with knife type blade contacts
High grade copper used for better conductivity and longer life
Quick make & Break operation
High mechanical endurance
Side handles operation
Enclosed housing to avoid dust ingress
Double break contacts per pole
Terminals suitable for Al and copper conductors
Door interlock and padlock facility, telescopic operating shaft
Enclosure made from CRCA sheet steel duly pretreated & powder coated
Conforms to:
IS / IES 60947-1&3
IEC 60947-1&3
Configuration:
DP / TP &FP
Rated Voltage:
415V
Ratings:
16A to 800A
16A to 63A ratings are available in Porcelain base
63A to 800A ratings are available in Knife type contacts
Above ratings are also available on request
Insulation Voltage:
660V
Ordering Code:
SCO
Switch Disconnector Fuses (SDF) and
Switch Disconnectors (SD)
Ship Switchgears is manufacturer of Switch Disconnector Fuses with Front Handle
operation with wide application in all industrial and residential where individual system
required safe and reliable operation. Wide range available from 63A to 630A.
Construction and Features:
Quick make and break operation
4 breaks per pole for longer life
High making and breaking capacity
Fuse contacts available suitable for bolted / knife type HRC fuses
Suitable for horizontal and vertical position mounting
No Line / Load restriction
Handle provided with door interlocking, padlocking & defeat mechanism facility
Also available Auxiliary switch on request
Suitable for Power Control Centers & Motor Control Centers
Also Suitable for D.C. and Capacitor application
Available in open execution and in sheet metal enclosure
Enclosure made of CRCA Sheet Steel duly pretreated and powder coated
Full range available in isolable & switched neutral
Advance Neutral feature incorporated
Conforms to:
IS/IEC 60947-1&3
IEC 60947-1&3
Rating:
32A to 630A
Isolators Switch Range:
100A to 1000A
Execution:
TPN & TPSN
Rated Voltage:
415V A.C
Rated Insulation Voltage:
660V
Utilization Category:
AC-23A
Ordering Code:
SDF
Fuse Switches (Double Break Fuse Switch)
Ship Switchgears manufacturer of complete range of heavy duty Fuse units are
offered to suit varied power distribution applications. The heavy duty Fuse Switches are
fully type tested with short circuit breaking capacity of 80kA at 415V suitable for
utilization category AC-22 / 23A & B.
Four deep drawn frame sizes covered the rating from DP/TP/TPN/FP-16A to 32A and
other ratings in fabricated frames.
Construction and Features:
Quick make and break operation
Complete range ISI Marked
Bases are made of Phenolic material with fire retardant shrouds
Silver plated contacts for high conductivity & longer life
Enclosure made of CRCA Sheet Steel duly pretreated and powder coated
Terminals suitable for Al. & Cu. conductors
Door interlocking facility available
Double break isolation per pole
CRCA Sheet Steel Cable entry Boxes are also available on request
Contact suitable for bolted type HRC fuses
Rating:
63 -630A
Rated Voltage:
415V
Rated Insulation Voltage:
660V
Utilization Category:
AC-22B
Configuration:
TP, TPN & FP
Conforms to:
IS / IEC 60947-1&3
IEC 60947-1&3
Ordering Code:
SMFT
Rewirable Switch Fuse Unit / Isolator
Ship Switchgears manufacturer of complete range of Rewirable Switch Fuse units are
offered to suit varied power distribution applications. The heavy duty Switches are fully
type tested with short circuit breaking capacity of 2kA & 4kA at 240V & 415V suitable for
utilization category AC-22 / 23A & B.
Four deep drawn frame sizes covered the rating from DP/TP/TPN/FP-16A to 32A and
other ratings in fabricated frames.
Construction and Features:
Quick make and break operation
Complete range ISI marked
Enclosure made of CRCA Sheet Steel duly pretreated and powder coated
Hard bright tin plated contacts for high conductivity & longer life
Terminals suitable for Al & Cu conductors
Knock-outs are provided at the top, bottom & rear side
All live parts are fully shrouded with porcelain material
Door interlocking facility available
Also available iron clad Switches rating from 16A to 63A
Conforms to:
IS / IEC 60947-1&3
IEC 60947-1&3
Configuration:
SPN / DP / TPN & FP
Rating:
16A to 320A
Cast Iron range also available from 16A to 63A rating
Rated Voltage:
240 / 415V
Rated Insulation Voltage:
660V
Utilization Category:
AC-22 A & B
AC-23 A & B
Ordering Code:
Iron Clad SPN / DP - SICD
Iron Clad TP / TPN - SICT
Switch Fuse Unit SPN / DP - SMD
Switch Fuse Unit TP / TPN - SMT
HRC Fuse Link (High Breaking Capacity Fuses) Ship Switchgears offers the new generation of low watt loss HBC fuse links, also
known as HRC Fuse Links designed as per the latest Indian and International standards
i.e. IS 13703 / IEC 60269 / BS standards.
Construction and Features:
Rated Breaking Capacity of 80 / 100 kA at 500V. A higher breaking capacity is
also possible
Low power loss ensures cool running & longer life
No-deration required for connected equipment
Reduced electromagnetic stress as a result of low cut off current thus providing
ideal short circuit protection
Reduced thermal stress because of lower let through fault energy thus
eliminating mechanical damages
Reduced power consumption because of low watt losses
Suitable for motor starting and switching ON power transformer due to superior
surge withstand capability
Ideal discrimination between major and minor fuse rating
Absolutely no emission of gas or flames during operation
Breaking range & Utilization category-gG, gL and also available gM on request
Interchangeability with all compatible brands
Total safety for the equipments
Ratings:
Bolted Type - 2A to 630A, SHNS, SHTIA, SHTIS, SHTC, SHTCP , SHTF,
SHTKF, SHTMF, SHTLM
Din Type/Knife Type - 6A to 630A, SHS-000, SHS-00, SHS-1, SHS-1C ,SHS-2,
SHS-2C, SHS-3
Cylindrical Type - 2A to 100A, SHRH-1, SHRH-2, SHRH-3, Wedge Type - 32A to
400A, SHJ-82, SHJ-92, SHJP-82, SHJP-92
Rated Voltage:
415V / 500V
Rated Insulation Voltage:
660V
Conforms to:
IS 13703-1 & 2, IEC 60269-1 & 2
BS 1361, BS 88
Metal Clad Plugs & Sockets
Ship Metal Clad Plug and Sockets are made Outer casing of non corroding die cast
Aluminum alloy. Interior Insulated material moulded of superior grade phenolic /
polyester compound. The earth connection makes first & breaks last. Deep recessed
socket contact tubes and shrouded plug pins for complete human safety and against
accidental contacts.
Uniform contact pressure is maintained due to highly conductive and resilient
material of the sleeve contacts.
Construction and Features:
Outer casing made of non corroding die cast aluminum alloy
Interior moulded of superior grade Phenolic / polyester compound
Deep recessed socket contact tubes and shrouded plug pins for complete human
safety and against accidental contacts
Uniform contact pressure is maintained due to highly conductive and resilient
material of the sleeve contacts
Rating:
Single Phase: 10A, 20A (2P+E) 240V
Three Phase: 20A, 30A (3P+E) 415V
Specification:
Confirms to IEC: 60309-1&3
Rated Voltage:
240V / 415V
Rated Insulation Voltage:
660V
Ordering Code:
SPS
Street Lighting Cutout
Ship Switchgears Switchgears is a manufacturer of Street Light Cutout. At the heart of maintaining the supply to
street lighting luminaries are robust and reliable fused Cutouts.
Ship has a many models incorporating either a SP, DP, TP & FP switching action. Street Light Cutouts are
manufactured from sheet steel enclosure dully pretreated and powder coated. All the Street Lighting Cutouts are
designed to meet the requirements of standards and customer.
Weather proof design fitted with rubber gasket which ensure ingress of protection as per category IP-42, 51,
54 etc.
Construction and Features:
Compact in sizes to fit in standard size tabular poles
Suitable for 2, 3, 4 and Core Cables
Non-hygroscopic, anti tracking and high impact strength mouldings for terminals
and fuse holders
Extensively being used in Middle-East Countries
Enclosure made of CRCA Sheet Steel duly pretreated and powder coated
Terminals are suitable to accommodate upto 35mm Sq. Cable
Canopy provided tp prevent rain water inside
Provided side glands for outgoing CKT
Suitable for Two pole MCB
Rating:
Upto 63A
Rated Voltage:
240V
Insulation Voltage:
660V
Specification:
Conforms to IEC : 60439-1
All Insulated House Service Cutout
SHIP all Insulated House Service Cutouts are engineered to provide complete safety &
security to the users and made modern aesthetics & latest technology. They are
designed to safe guard distribution, control and protection from shocks & accidental
touch.
Construction and Features:
All Components are inter-locked
Hard bright tin plated contacts for high conductivity & longer life
Terminals suitable for Al & Cu conductors
Sealing provision to avoid unauthorized access
Common housing from 16 Amps. to 100 Amps
Terminals are suitable for Aluminium / Copper conductor’s upto 35sq. mm
Loop in and Loop out cabling contacts available
Specification:
BS : 1361
Suitable for Cylindrical HRC fuses conforms to BS 1361, Type-IIa & IIb.
Execution:
SP, SPN, TP & TPN
Rating:
16A - 100 A
Rated Voltage:
240V / 415V
Rated Insulation Voltage:
660V
Wedge Type HRC Fuses and Carrier
SHIP Wedge Type HRC Fuses and Carriers have specially been designed and conforms to the latest BS
standards. Special Pure Silver elements of low watt losses are custom built for specific customers. They
have been designed for interrupting short circuits of more then 80kA.
Construction and Features:
Entire range confirms BS / IEC standards
Low Cut-off current of HRC Fuses
Lower let through fault energy of HRC Fuses
Low power losses of the Fuses
Superior surge with stands capability
Interchangeability with all compatible brands
Special grade Copper / Silver elements used in HRC Fuses
Carrier housing made of glass fiber reinforced polyester (DMC) having high
electrical and mechanical properties
Available in fixing centre 82mm or 92mm
Specification:
Wedge type Fuse Conforms to BS :88 Part-5 : 1988
Carriers Conforms to BS :88 Part-I / IEC 60269-1
Rating:
50A to 500A
Rated Voltage:
415V
Rated Insulation Voltage:
660V
Bus Bar Chamber
Ship Switchgears is a manufacturer of sheet metal fabricated Busbar Chambers as per customer requirements /
specification. Sheet metal fabricated body and cover rust protected and Phosphated in 8 tank process. Cover of
busbar chamber is detachable to facilitate easy wiring. We are using electrolytic Copper material for busbars. Our
Busbar designed ensure the correct rating of current.
Construction and Features:
Busbar Chamber made with electrically live parts do not get exposed
High grade copper busbar dully hard bright tin plated used
Weather proof design - Perfect fitted gaskets which ensure ingress protection as
per IP-42 category
Suitable for flush and surface mounting
Enclosure made from CRCA sheet steel duly pretreated & powder coated
Conforms to IS 8623
Rating:
DP & FP
Configuration:
4Way / 6Way
Rated Current:
32A to 630A
Rated Voltage:
240 / 415V
Rated Insulation Voltage:
660V
Ordering Code:
SBBC
Distribution Fuse Board
Construction and Features:
Porcelain Fuse Base and Carrier are provided for outgoing cable termination
having excellent mechanical, thermal and dielectric properties
High grade copper busbar used
Weather proof design - Perfect fitted gaskets which ensure ingress protection as
per IP-42 category
Suitable for flush and surface mounting
Enclosure made from CRCA sheet steel duly pretreated & powder coated
Fuse Base & Carrier Conforms to IS 2086
Rating:
SPN / TPN
Configuration:
2 / 3 / 4 / 6 / 8 / 10 Way
Rated Voltage:
240 / 415V
Rated Insulation Voltage:
660V
Ordering Code:
SDBS
SDBT
Energy Meter Boxes (Single Phase and Three Phase)
Construction and Features:
Flexibility during installation
Also ensures that electrically live parts do not get exposed
Weather proof design - Perfect fitted gaskets which ensure ingress protection as
per IP-42 category
Suitable for flush and surface mounting
Enclosure made from CRCA sheet steel duly pretreated & powder coated
Provision for fitting of porcelain fuse base and carrier and MCBs
Suitable for single / three phase energy meter
Bakelite sheet provided for mounting of energy meter
Rating:
Upto 63A
Configuration:
Single / Three phases
Single phase with provision of 3 Nos Porcelain fuse base and carrier or 8 Nos SP
MCBs
Three phase with provision of 3 Nos Porcelain fuse base and carrier or 2 Nos SP
MCBs
Provisions for two or four nos. energy meters in box are also available on
request.
Rated Voltage:
240 / 415V
Rated Insulation Voltage:
660V
Ordering Code:
Single phase ordinary type - SEMSO
Three phase ordinary type - SEMTO
Single phase super line type - SEMSS
Three phase super line type - SEMTS
Single phase super line type with 8ways MCBs enclosure - SEMSM
Rewirable Type Porcelain Fuse Base and Carrier (Kit Kat)
Ship Switchgears is one of the largest manufacturers of high quality, reliable performance and low maintenance of
Rewirable type Porcelain Fuse Unit
(Kit-Kat). We get our range checked and Tested on various parameters as per Indian standard with the help of our
technical professionals to ensure best quality of products.
Construction and Features:
Complete range available
Hard bright tin plated contacts for high conductivity & longer life
Terminals suitable for Al & Cu conductors
All live parts are fully shrouded with porcelain material
Base and Carrier made of electrical grade porcelain material for longer life
Conforms to:
IS : 2086
Rating:
16A-500A (32A & 63A also available in Handle Type)
Rated Voltage:
240 / 415V
Rated Insulation Voltage:
660V
Ordering Code:
SKK
Oil Immersed Starters (Direct On Line and Star Delta)
Ship Switchgears is the manufacturer of an extensive range of Oil Immersed Motor Starter such as Direct on Line,
Star Delta manually operated
(Handle Type), Semi Automatic and Fully automatic oil Immersed starters.
Construction and Features:
CRCA sheet steel oil tank pre-treated and powder coated for elegant finish
Silver/Tin Plated copper contacts for high conductivity and longer life
Making & breaking of contacts in oil for quick quenching of arc
Individually tested Magnetic / Bi-metallic overload relays for complete protection
of your motor
Available in Direct-On-Line, Star-Delta, Semi automatic and Fully Automatic
models
Enclosure made from CRCA sheet steel duly pretreated & powder coated /
painted
Conforms to:
IS 13947-4
Rated Voltage:
415V
Description:
D.O.L. Oil Immersed Starter With Magnetic Relay
D.O.L. Oil Immersed Starter With Bimetal Thermal Relay
Hand Operated Star-Delta Oil Immersed Starter With Magnetic Relay
Semi Automatic Star-Delta Oil Immersed Starter With Bimetal Thermal Relay
Fully Automatic Star-Delta Oil Immersed Starter With Bimetal Thermal Relay
Ratings:
3 HP to 35 HP
3 HP to 25 HP
5 HP to 60 HP
5 HP to 25 HP
5 HP to 25 HP
Modular Change Over Switch
Ship Switchgears Modular Changeover Switches 40A & 63A are a unique solution for the control between two
power supplies.
Ship Modular Changeover Switches can be fitted into any standard DIN rail. Our design is compatible with all other
modular device of Ship such as MCB's and RCCB's. The Modular Change Over Switches are available in both 2 & 4
pole versions, for single and three phase applications.
Construction and Features:
Modular changeover switch can be fitted into any standard DIN-rail mounted
enclosure
Design is compatible with all other modular devices, such as MCBs and RCCBs
Switch comes in 2P and 4P version, for single and three phase applications
The incoming side must be protected against short circuit and for isolation with
MCB
The changeover switch comes with a centre-off position
Non-Flammable thermoplastic body
Conforms to:
IEC 60947-3
IS / IEC 60947-3
Rating:
25A / 40A & 63A
Rated Voltage:
240 / 415V
Rated Insulation Voltage:
500V
Ordering Code:
SMCO
LT Control Switch
Ship Switchgears LT Control switches are ideal for all types of small drives for direct switching and control of three
phase AC motors and are available in wide range such as ON/OFF switch, reversing switch and changeover switch
and phase changer etc. Suitable for frequent operation. Reliable and safe for starting / reversing and stopping of 3
phase motors.
LT Control Switch:
On-Off Switch
Reverse Forward Switch
Change Over Switch
Phase Changer
Construction and Features:
Compact in size
Quick make and break operation
High making and breaking capacity
Suitable for horizontal and vertical position mounting
Suitable for motor duty switch
Available in open execution and in sheet metal enclosure
Enclosure made of CRCA Sheet Steel duly pretreated and powder coated
Full range available
Silver plated contacts in 63A for high conductivity & longer life
Hard bright tin plated contacts for high conductivity & longer life
Terminals suitable for Al. & Cu. Conductors
Rating:
16A to 63A
Rated Voltage:
240 / 415V
Rated Insulation Voltage:
500V
DMC Fuse Bases (DIN Type Fuse Bases)
Ship Switchgears is manufactured Din type HRC Fuse Bases is designed by electrical experts who understand the
needs of the clients and by using latest technology. Use of latest technology and unique design makes Din type HRC
Fuse Bases.
Construction and Features:
Housing of glass fibre reinforced polyester (DMC) having high electrical and
mechanical properties, non inflammable. fire retardant and self extinguishing
Contacts of electrolytic copper, Tin plated with back up springs for contact
pressure
Terminal bolt sizes are 10mm for 250A and 400A and 12mm for 630 Amps.
Suitable for Blade contact type / DIN type HRC fuse links in size 000, 00,1, 2 & 3
Conforms to:
IS 13703-1 / IEC 60269-1
Rating:
Size 00 - 160A
Size 1 - 250A
Size 2 - 400A
Size 3 - 630A
Rated Voltage:
415V / 500V
Rated Insulation Voltage:
660V
Bakelite Fuse Fittings
Ship Switchgears is a manufacturer of Fuse Holder and Carrier to suit the bolted type HRC Fuses. Housing made of
electrical grade Bakelite powder material having High Electrical and Mechanical Properties, Non Inflammable, Fire
Retardant and Self Extinguishing.
Terminals holes size for cable connection are Adequate to Accommodate Aluminum Cable also.
Construction and Features:
Housing made of Bakelite having high electrical and mechanical properties, non
inflammable. fire retardant and self extinguishing
Contacts of electrolytic brass / copper, Hard bright tin plated with back up springs
for contact pressure copper, silver plated with back up springs for contact
pressure
Terminal suitable for Al. and Cu. conductors
Suitable for bolted type HRC fuse links
Conforms to:
IS 13703-1 / IEC 60269-1
Rating:
16A to 100A
Type:
Front Connection
Busbar Connection
Rear Connection
Rated Voltage:
415V / 500V
Rated Insulation Voltage:
660V
New Range LED LIGHTING Products
A Light Emitting Diode (LED) is a semiconductor device that emits visible light when an electric current
passes through it. The light is not particularly bright, but in most LEDs it is monochromatic, occurring at a
single wavelength.
Ship Switchgears introducing new series of LED Panel Light / LED Super Slim / Slim Lighting, LED
COB Lighting / LED Flood Lighting /LED Strip Lighting / LED Concealed Lighting etc.
Household Electrical Accessories
Ship Switchgears offers a brand new range (Elegant Series) of electrical accessories used for modern homes and
commercial establishments such as Batten Holder, Angular Batten Holder, Ceiling Rose, Multiplug, Plug 6A & 16A,
DP-Switch and Extension Cord etc.
Construction and Features:
High Current Carrying Capacity
Low –Resistance contact point for longer life
Shock proof and fire retardant material used
Power Control Panel Ship Switchgears is now offers customized solutions for trouble free distribution Power Panel for
electrical power supply. Our Panel board is a power distribution board with MCCBs / ACB as incoming
and MCBs / MCCBs as outgoing switching-cum-protective devices, for distribution of power to various
loads as per the requirements of the system. The modular construction of panel board renders the
customary panel building redundant by virtue of compactness. All Panels are fabricated using sheet steel
of 1.2 / 1.6mm and are pre-treated powder coated to give a superior finish.
Specification:
Fully application / customized product as per
IS / IEC 60947-1 & III and IEC 60947-I&II
IS 8623 and IEC 60439
IS 2147 and IEC 60529
Range:
SHIP make MCCBs under the various current & frame sizes and can be fitted at site
as per customer requirement. Wide range available as per customer requirements.
top related