moc3023 series moc3020 thru product data sheet …
Post on 22-Mar-2022
7 Views
Preview:
TRANSCRIPT
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / OptoelectronicsNo.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660http://www.liteon.com/opto
PhotocouplerProduct Data SheetMOC3020 THRU MOC3023 SERIES
Spec No. :DS-70-99-0019Effective Date: 06/16/2021Revision: K
1/12
PhotocouplerMOC302X series
Part No. : MOC302X SeriesBNS-OD-FC002/A4Rev. : I
1. DESCRIPTION1.1 Featuresn Isolation voltage between input and output Viso : 5,000Vrms
n 6pin DIP photocoupler, triac driver outputn High repetitive peak off-state voltage VDRM : Min. 400Vn High critical rate of rise of off-state voltage( dV/dt : MIN. 1000V / ms )n Dual-in-line package : MOC3020, MOC3021, MOC3022, MOC3023n Wide lead spacing package : MOC3020M, MOC3021M, MOC3022M, MOC3023Mn Surface mounting package : MOC3020S, MOC3021S, MOC3022S, MOC3023Sn Tape and reel packaging : MOC3020S-TA, MOC3021S-TA, MOC3022S-TA, MOC3023S-TA MOC3020S-TA1, MOC3021S-TA1, MOC3022S-TA1, MOC3023S-TA1n Safety approval
UL 1577
VDE DIN EN60747-5-5 (VDE 0884-5)
CSA CA5A
CQC GB4943.1-2011/ GB8898-2011 (meet Altitude up to 5000m)
Nordic Safety (DEMKO)
n RoHS Compliance
All materials be used in device are followed EU RoHS directive (No.2002/95/EC).n MSL class1n Halogen free option
1.2 Applicationsn AC Motor Drivesn AC Motor Startersn E.M. Contactorsn Lighting Controlsn Solenoid/Valve Controlsn Solid State Relaysn Static Power Switchesn Temperature Controls
2/12
PhotocouplerMOC302X series
Part No. : MOC302X SeriesBNS-OD-FC002/A4Rev. : I
2. PACKAGE DIMENSIONS2.1 MOC302X 2.2 MOC302XM
2.3 MOC302XS
Notes :1. 2-digit year code, example : 2016 = 162. 2-digit work week ranging from ‘01’ to ‘53’3. Factory identification mark shall be marked
(W: China-CZ, Y: Thailand) 4. VDE option 5. IFT rank
* Dimensions are in Millimeters and (Inches).
3/12
PhotocouplerMOC302X series
Part No. : MOC302X SeriesBNS-OD-FC002/A4Rev. : I
3. TAPING DIMENSIONS
3.1 MOC302XS-TA 3.2 MOC302XS-TA1
3.3 Quantities Per Reel
Description Symbol Dimension in mm (inch)
Tape wide W 16±0.3 (0.63)
Pitch of sprocket holes P0 4±0.1 (0.15)
Distance of compartmentF 7.5±0.1 (0.295)
P2 2±0.1 (0.079)Distance of compartment to
compartmentP1 12±0.1 (0.472)
Package Type MOC302XS series
Quantities (pcs) 1000
4/12
PhotocouplerMOC302X series
Part No. : MOC302X SeriesBNS-OD-FC002/A4Rev. : I
4. RATING AND CHARACTERISTICS
4.1 Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Rating Unit
Input
Forward Current IF 50 mA
Reverse Voltage VR 6 V
Junction Temperature TJ 125 oC
Power Dissipation P 70 mW
Output
Off-State Output Terminal Voltage VDRM 400 V
Peak Repetitive Surge Current
( PW=1ms, 120pps )ITSM 1 A
Junction Temperature TJ 125 oC
Collector Power Dissipation PC 300 mW
Total Power Dissipation Ptot 330 mW
1. Isolation Voltage Viso 5000 Vrms
Operating Temperature Topr -40 ~ +110 oC
Storage Temperature Tstg -55 ~ +150 oC
2. Soldering Temperature Tsol 260 oC
1. AC For 1 Minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and between collector and emitter on the
secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used.
(3) The waveform of applied voltage shall be a sine wave.
2. For 10 Seconds
5/12
PhotocouplerMOC302X series
Part No. : MOC302X SeriesBNS-OD-FC002/A4Rev. : I
4.2 Recommended Operating Conditions (Note)
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device.
Additionally, each item is an independent guideline respectively. In developing designs using this product,
please confirm specified characteristics shown in this document.
Characteristics Symbol Min. Typ. Max. Unit
Supply Voltage VAC - - 120 Vac
Forward Current
MOC3021
IF
22.5 25 30 mA
MOC3022 15 20 30 mA
MOC3023 7.5 10 30 mA
Operating Temperature Topr -25 - 85 °C
6/12
PhotocouplerMOC302X series
Part No. : MOC302X SeriesBNS-OD-FC002/A4Rev. : I
4.3 Electrical Optical Characteristics at Ta=25°C
Parameter Symbol Min. Typ. Max. Unit Test Condition
Input Forward Voltage VF — 1.15 1.4 V IF=20mA
Reverse Current IR — 0.05 10 mA VR=6V
Output
1Peak Blocking Current, Either
DirectionIDRM — 10 100 nA VDRM = 400V
Peak On-State Voltage, Either
DirectionVTM — — 3.0 V ITM=100 mA Peak
2Critical rate of Rise of Off-
State Voltagedv/dt 1000 — — V/ms Vin=240Vrms
Couple
Led Trigger
Current, Current
Required to
Latch Output,
Either Direction
MOC3021
IFT
— — 15
mAMain Terminal
Voltage = 3VMOC3022 — — 10
MOC3023 — — 5
Holding Current, Either
DirectionIH — 200 — mA
*1. Test voltage must be applied within dv/dt rating.
*2. This is static dv/dt. Commutating dv/dt is a function of the load-driving thyristor(s) only.
7/12
PhotocouplerMOC302X series
Part No. : MOC302X SeriesBNS-OD-FC002/A4Rev. : I
5. CHARACTERISTICS CURVES (TYPICAL PERFORMANCE)
Fig.1 Forward Current vs. Fig.2 On-state Current vs. AmbientTemperature
Fig.4 Forward Current vs. Forward
F
0-40
60 C40 C20 C
Ambient TemperatureFig.6 Holding Current vs.
TemperatureFig.5 On-state Voltage vs. Ambient
Fig.3 Minimum Trigger Currentvs. Ambient Temperature
Forw
ard
curre
nt I
(m
A)
I ,
on-
stat
e cu
rrent
(A)
Forw
ard
curre
nt IF
(mA)
On-
stat
e vo
ltage
VT
(V)
Min
imum
trig
ger c
urre
nt IF
T (m
A)
Hol
ding
cur
rent
IH (m
A)
Ambient temperature Ta ( C) Ambient Temperature Ta ( C)
Forward voltage VF (V)Ambient temperature ( C)
Ambient temperature Ta ( C) Ambient temperature Ta ( C)0 20 40 60 80 100
60
0
0.41
2.0
0.0120 40 60 80 10020
1.0100
200
10
o
o
o
Ambient Temperature
o o
Voltage
IT= 100mA3.0
10
100
8
6
4
2
50
40
30
20
10
100
1
o80 Co100 C
0.05
0.10
TM
VP= 6VRL= 100
2.6
2.2
1.4
1.8
40 8060o
VP= 6V
0.8 1.2 1.6
o
806040o
0.1
120-20 -40 -20 0 804020 60 100 120
Fig.3 Normalized Trigger Current
vs Ambient Temperature
Fig.5 Normalized On-state Voltage
vs Ambient Temperature
0
10
20
30
40
50
60
-40 -20 0 20 40 60 80 100 120
I F-F
orw
ard
Curr
ent -
(mA)
TA - Ambient Temperature - oC
0
20
40
60
80
100
120
-40 -20 0 20 40 60 80 100 120
I TM-O
n St
ate
Curr
ent -
(mA)
TA - Ambient Temperature - oC
0.1
1
10
100
0.6 0.8 1 1.2 1.4 1.6
I F-F
orw
ard
Curr
ent -
mA
VF - Forward Voltage - V
TA=110oCTA=75oCTA=25oCTA=0oCTA=-40oC
Fig.6 Normalized Holding Current
vs Ambient Temperature
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
-40 -20 0 20 40 60 80 100 120
N.I F
T-
Norm
aliz
ed T
rigg
er LE
D C
urre
nt
TA - Ambient Temperature - oC
VTM=3VNormalized to TA =25oC
00.20.40.60.8
11.21.41.61.8
2
-40 -20 0 20 40 60 80 100 120
N.V
TM-N
orm
aliz
ed O
n-St
ate
Volta
ge
TA - Ambient Temperature - oC
IF=10mA, ITM=100mANormalized to TA =25oC
0.1
1
10
-40 -20 0 20 40 60 80 100 120
N.I H
-Nor
mal
ized
Hol
ding
Curr
ent
TA - Ambient Temperature - oC
Normalized to TA =25oC
8/12
PhotocouplerMOC302X series
Part No. : MOC302X SeriesBNS-OD-FC002/A4Rev. : I
Fig.7 Off-state Current vs
Ambient Temperature
1
10
100
1000
1 1.5 2 2.5 3
I TM-O
n-St
ate
Curr
ent -
mA
VTM - On-State Voltage - V
IF=Rated IFTTA = 25oC
Fig.8 On-state Current vs
On-state Voltage
0.1
1
10
100
1000
-40 -20 0 20 40 60 80 100 120
N. I
DRM
-Nor
mal
ized
Peak
Off-
stat
e Cu
rren
t
TA - Ambient Temperature - oC
VDRM=Rated VDRM
Normalized to TA=25oC
9/12
PhotocouplerMOC302X series
Part No. : MOC302X SeriesBNS-OD-FC002/A4Rev. : I
6. TEMPERATURE PROFILE OF SOLDERING6.1 IR Reflow soldering (JEDEC-STD-020E compliant)
One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three
times.
Profile item Conditions
Preheat
- Temperature Min (TSmin)
- Temperature Max (TSmax)
- Time (min to max) (ts)
150˚C
200˚C
90±30 sec
Soldering zone
- Temperature (TL)
- Time (tL)
217˚C
60 sec
Peak Temperature (TP) 260˚C
Ramp-up rate 3˚C / sec max.
Ramp-down rate 3~6˚C / sec
60 ~ 120 sec25 C
150 C
200 C
260 C
217 C
60 sec
Time (sec)
Tem
pera
ture
( C
)
20 sec
Tsmax
ts (Preheat)
tL (Soldering)Tsmin
TL
TP
Ramp-down
Ramp-up
35~70 sec
10/12
PhotocouplerMOC302X series
Part No. : MOC302X SeriesBNS-OD-FC002/A4Rev. : I
6.2 Wave soldering (JEDEC22A111 compliant)One time soldering is recommended within the condition of temperature.
Temperature: 260+0/-5˚C
Time: 10 sec.
Preheat temperature:25 to 140˚C
Preheat time: 30 to 80 sec.
6.3 Hand soldering by soldering iron Allow single lead soldering in every single process. One time soldering is recommended.
Temperature: 380+0/-5˚C
Time: 3 sec max.
11/12
PhotocouplerMOC302X series
Part No. : MOC302X SeriesBNS-OD-FC002/A4Rev. : I
7. RRECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD)
Unit: mm
12/12
PhotocouplerMOC302X series
Part No. : MOC302X SeriesBNS-OD-FC002/A4Rev. : I
8. NAMING RULE
9. NOTESn LiteOn is continually improving the quality, reliability, function or design and LiteOn reserves the right to make changes without
further notices.n The products shown in this publication are designed for the general use in electronic applications such as office automation
equipment, communications devices, audio/visual equipment, electrical application and instrumentation.n For equipment/devices where high reliability or safety is required, such as space applications, nuclear power control equipment,
medical equipment, etc, please contact our sales representatives.n When requiring a device for any ”specific” application, please contact our sales in advice.n If there are any questions about the contents of this publication, please contact us at your convenience.n The contents described herein are subject to change without prior notice.n Immerge unit’s body in solder paste is not recommended.
MOC302(X)(1)-(2)-GDEVICE PART NUMBER (MOC302X)
Please refer to Electrical OpticalCharacteristics Table on Page 6
(2) TAPING TYPE (TA, TA1)
(3) Halogen free
Example : MOC3021S-TA1-G
(1) FORM TYPE (S, M or none)
MOC302(X)(1)(2)-V-GDEVICE PART NUMBER (MOC302X)
Please refer to Electrical OpticalCharacteristics Table on Page 6
(2) TAPING TYPE (TA, TA1)
(1) FORM TYPE (S, M or none)
(3) VDE option
(4) Halogen free
Example : MOC3021STA1-V-G
top related