more control over input and output (i / o)
Post on 04-Jan-2016
34 Views
Preview:
DESCRIPTION
TRANSCRIPT
1
More Control over
INPUT and OUTPUT (I / O)
The interface between the user and the computerFormats and edit descriptors
Input editingOutput editing
read, write and print statementsMore powerful formats
2
More Control over INPUT and OUTPUT (I / O)
The input and output facilities of any programming language are extremely important, because it is through these features of the language that communication between the user and the program is carried out.
F, therefore, provides facilities for input and output at two quite different levels.
As are given before, list-directed input and output statements that provide the capability for straightforward input from the keyboard and also the output to the display or printer.
These list-directed “i/o” - statements, however, allow the user very little control over the source or layout of the input data.
3
F allows the programmer,
to specify exactly how the data will be presented and interpreted, from which of the available input units it is to be read
how the results are to be displayed
to which of the available output units the results are to be sent.
More Control over INPUT and OUTPUT (I / O)
4
INTERFACE between the USER and the COMPUTER
Considering the following 9 – digit input data there are enormous number of possible interpretations :
Data : 1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
- 1, 2, 3, 4, 5, 6, 7, 8, and 9
- 123, 456, 789
- 12345 . 6789
- 1.23, 0.45, 67, 8900- etc.
5
FORMATS and EDIT DESCRIPTORS
An input statement must contain three distinct types of information
•where the data is to be found•where it is to be stored in the computer’s memory•how it is to be interpreted
Similarly, an output statement must define
•where the results are currently stored•where they are to be sent•in what form they are to be displayed.
6
INPUT EDITING
EXAMPLES of INPUT DATA : 123456789
read “ ( i 3, i 3, i 3 )” , n1, n2, n3
! n1 = 123, n2 = 456, n5 = 789
read “ ( t 5, i 2, t 6, i 2, t 2, i 4 )” , x, y, z
! x = 56, y = 67, z = 2345
read “ ( f 9.4 )” , real_num ! real_num = 12345.6789
read “ ( f 3.1, f 2.2, f 3.0 )” , r1, r2, r3 ! r1 = 12.3, r2 = 0.45, r3 = 678.0
123456789
123456789
123456789
7
EXAMPLE for formatting of real numbers using “ f – edit descriptor “ depending on the two different INPUT DATA :
read “ ( f 3.1, f 2.2, f 3.0 )” , s1, s2, s3
DATA 1 DATA 2
123456789 .23.56.8 ---------------------- -----------------s1 contains : 12.3 0.23
s2 contains : 0.45 0.5
s3 contains : 678.0 6.8
8
EXAMPLEs for formatting of an input real number in different ways using “ a – edit descriptor “
real number is : 361.764
•361.764•3.61764+2•361764–3•0.0361764e4•3617.64d-1•3.61764 E +2•361.764+0
9
EXAMPLEs for formatting of an input – character type using “ a – edit descriptor “
• character ( len = 10 ) : : ch1• character ( len = 6 ) : : ch2• character ( len = 15 ) : : ch3
Depending on the above-given declaration the formats may have the following forms in read statements :
• read “ ( a10, a6, a15 )” , ch1, ch2, ch3 or• read “ ( a, a, a )” , n1, n2, n3
10
LOGICAL DATA - INPUT EDITING
The edit descriptor is used with logical data, and takes the following form, where upper case “ L” is used to avoid the potential confusion with the digit “ 1 “ that can be caused to human readers by using the lower-case form :
L w
“ w “ caharacters are used to derive either a “ true “ value, a “ false “ value or an error.
11
12
Any of the following are acceptable as representing true :
t true .T .true. truthful
while the following will all be interpreted as false :
F False .f. futile
LOGICAL DATA - INPUT EDITING
13
OUTPUT EDITING
The following figure shows the main edit descriptor that are available for output.
EXAMPLE for “i” edit descriptor
tom = 23dick = 715harry = -12
print *, “( i 5, i 5, i 5 )”, tom, dick, harry
This statement produce following line of output (where the symbol # represents a space ) :
###23##715##-12
14
EXAMPLE for “f” edit descriptor :
x = 3.14159y = -275.3024z = 12.9999
print *, “( f 10.3, f 10.3, f 10.3 )”, x, y, z
This statement produce following line of output (where the symbol # represents a space ) :
#####3.142##-275.302###-13.000
OUTPUT EDITING
15
EXAMPLE :
program tabular_output
real, parameter : : third = 1.0 / 3.0 real : : x integer : : i do i = 1, 10 x = i print “( f 15.4, f 15.4, f 15.4 )”, x, sqrt (x), x**third end do
end program tabular_output
OUTPUT EDITING
16
In the above-given program the same edit descriptor has been repeated several times.
A number, called a “repeat count”, may be placed before the “ i, f, a or L “ – edit descriptors to indicate how many times they are to be repeated. Depending on this, the format could be written more succinctly andİt is possible to write it more clearly.
EXAMPLE : print “( i 5, i 5, i 5, f 6.2, f 6.2, f 6.2, f 6.2 )”, x, y, z, d, e, f, g
or better
print “( 3 i 5, 4 f 6.2 )”, x, y, z, d, e, f, g
OUTPUT EDITING
17
Exercise 2
program test1integer ::a,breal::c,dprint*,"please enter an integer values which is
more than 6 digit"read "(i4,t1,i4,t2,f4.1,t1,f4.2)",a,b,c,dprint "(i4,a,i5,a,i5,a,f6.2,a,f6.2,a,f8.3)",a,& " minus",b," is",a-b,";",c," minus",d, " is",c-dend program test1
18
Exercise 3
program test2
character(len=6)::a,b,c
Print*,”Please write your name”
read "(a8,t1,a4,t1,a)",a,b,c
print "(a10,tr12,a4,tr30,a)",a,b,c
print "(a,t10,a,t52,a)",a,b,c
end program test2
19
program five_digit_numbers integer::iinteger,dimension(12)::arrarr = (/12345, 23456, 34567, 45678,& 90123, 12340, 24680, 46802,& 13579, 35791, 57913, 69649/)
! output for single column format exampleprint*,"Single column of numbers"do i = 1 , 12print "(t8,i2,1x,i5)",i,arr(i)end do! output for four rows of three numbers print "(2/t3,a/)","Four rows of three numbers "print "(t8,i2,1x,3(i5,1x))", 1,arr(1:3)print "(t8,i2,1x,3(i5,1x))", 2,arr(4:6)print "(t8,i2,1x,3(i5,1x))", 3,arr(7:9)print "(t8,i2,1x,3(i5,1x))", 4,arr(10:12)! a single line of numbersprint "(2/t3,a/)", "A single line of numbers "print "(t2,12(i5,1x))", arrend program five_digit_numbers
20
program multi_record_example
real :: a,b
a = 12.25
b = 23.50
write(unit=6,fmt="(t10,a,3/,a,f6.2,a,f6.2,a,///,f7.2,2/,a,f10.3)")&
"Multi-record example", &
" The sum of ",a," and",b," is", a+b, &
" Their product is",a*b
end program multi_record_example
21
program railway_time_tableinteger,parameter::n=5integer::ireal,dimension(n)::arrival,departureinteger,dimension(n)::platformcharacter(len=10),dimension(n)::destinationarrival=(/9.23, 9.28, 10.41, 10.48, 11.15/)departure=(/9.25, 9.32, 10.53, 10.53, 11.18/)platform=(/2, 1, 3, 2, 1/)destination=(/"Edinburgh"," London","Sheffield",& "Newcastle"," London"/)write(unit=6,fmt="(/a/2x,7('='),3x,9('='),3x,8('='),3x,11('='))") & " Arrival Departure Platform Destination"do i = 1 , nwrite(unit=6,fmt="(3x,f5.2,6x,f5.2,8x,i1,8x,a10)") & arrival(i),departure(i),platform(i),destination(i)end doend program railway_time_table
22
program test2character(len=6)::a,b,cprint *, "........................ STEPPER... Entering PROGRAM. Press Enter"print*,"program test2"read *print *, "........................ STEPPER... Before READ. Press Enter"print*,"read ""(a8,t1,a4,t1,a)"",a,b,c"read *read "(a8,t1,a4,t1,a)",a,b,cprint *, "........................ STEPPER... After READ. Press Enter"read *print "(a8,tr2,a4,tr3,a)",a,b,cprint*,"print ""(a8,tr2,a4,tr3,a)"",a,b,c"print *, "........................ STEPPER... After PRINT. Press Enter"read *print "(a,t10,a,tr2,a)",a,b,cprint*,"print ""(a,t10,a,tr2,a)"",a,b,c"print *, "........................ STEPPER... After PRINT. Press Enter"read *print *, "........................ STEPPER... Before ENDPROGRAM. Press Enter"print*,"end program test2"read *end program test2
23
program tabular_outputreal, parameter :: third = 1.0 / 3.0real :: xinteger :: ido i = 1 , 10x = i
! print "(f15.4, f15.4, f15.4)", x,sqrt(x),x**thirdprint "(3f15.4)", x,sqrt(x),x**thirdend doend program tabular_output
24
program aa character (len=50) :: a, b, c, d, e integer :: i, j a = "aaa bbbb ccccc dddddd eeeeeee" print *, a i = index(a," ")+1 b = a(:i-2) print *, b c = a(i:) print *, c j = index (c," ") +1 d = c(:j-2) print *, d e = d(j:) print *, e end program aa
25
program character_searc_function !examle for index, you can olso try scan and verify character (len=50) :: a, b, c, d, e integer :: i, j a = "bbb cccc ddddd eeeeee" print *, a i = index(a,"d") !Calculates how many chracter before and including "c" print*,"i",i b = a(:i-2) print *, b c = a(i:) print *, c j = index (c," ") +1 d = c(:j-2) print *, d e = d(j:) print *, e end program character_searc_function
26
! Assignment statements with constant expressions. program C01 implicit none integer, parameter :: NAME_LENGTH = 21 real :: Avogadros_Number integer :: Many complex :: Z logical :: Flag character (len = NAME_LENGTH) :: Name! start program C01 Many = 346021 ! Integer type Avogadros_Number = 6.0221367e23 ! Real type Z = (0.0, 1.75e8) ! Complex type Flag = .true. Name = " Mustafa " ! Character type, length 21 write (unit = *, fmt = *) Many, Avogadros_Number, Z, Flag, Name stop end program C01
27
! Assignment statements with variable expressions. module C02M implicit none public :: Assign_2 contains subroutine Assign_2( ) ! Type declarations with initialization: real, save :: Y = 1.23, Pi = 3.141592 integer, save :: Counts = 173 character (len = 8), save :: I = " Optics " logical, save :: Flag = .true. ! Type declarations without initialization: real :: X, Theta integer :: Many character (len = 8) :: K logical :: Done ! start subroutine Assign_2 X = Y ! Real type Y = X Theta = Pi Many = Counts ! Integer type K = I ! Character type, length 8 Done = Flag ! Logical type write (unit = *, fmt = *) Y, Pi, X, Theta, Counts, Many, I, K, Flag, Done return end subroutine Assign_2 end module C02M
program C02 use C02M implicit none! start program C02 call Assign_2( ) stop end program C02
28
! Assignment statements with arithmetic expressions. program C03 implicit none real, parameter :: GRAVITY = 9.8 real :: Old_Vol, Old_Press, Old_Temp, New_Vol, New_Press, New_Temp real :: Mass, Velocity, Kinetic_Energy, Pressure, Density, Height, Bernoulli integer, parameter :: J = 6 integer :: I! start program C03 I = J + 1 write (unit = *, fmt = *) I read (unit = *, fmt = *) Old_Vol, Old_Press, Old_Temp, New_Press, New_Temp New_Vol = Old_Vol * (Old_Press / New_Press) * (New_Temp / Old_Temp) write (unit = *, fmt = *) Old_Vol, Old_Press, Old_Temp, New_Vol, New_Press, New_Temp read (unit = *, fmt = *) Mass, Velocity Kinetic_Energy = 0.5 * Mass * Velocity ** 2 write (unit = *, fmt = *) Mass, Velocity, Kinetic_Energy read (unit = *, fmt = *) Pressure, Density, Velocity, Height Bernoulli = Pressure + Density * (0.5 * Velocity ** 2 + GRAVITY * Height) write (unit = *, fmt = *) Pressure, Density, Velocity, Height, Bernoulli stop end program C03
29
program aa character (len=50) :: a, b, c, d, e integer :: i, j a = "aaa bbbb ccccc dddddd eeeeeee" print *, a i = index(a," ")+1 b = a(:i-2) print *, b c = a(i:) print *, c j = index (c," ") +1 d = c(:j-2) print *, d e = d(j:) print *, e end program aa
program 0206 ! Asks the hour and the minute values of the ! present time and displays it as a sentence. integer :: hh,mm print *, " Input the hour, in the 24 hours format." read *, hh print *, " Input the minute." read *, mm print *, "" print *, " THE TIME IS ",mm," MINUTES AFTER ",hh end program 0206 ! Assignment statements with constant expressions.
program C01 implicit none integer, parameter :: NAME_LENGTH = 21 real :: Avogadros_Number integer :: Many complex :: Z logical :: Flag character (len = NAME_LENGTH) :: Name ! start program C01 Many = 346021 ! Integer type Avogadros_Number = 6.0221367e23 ! Real type Z = (0.0, 1.75e8) ! Complex type Flag = .true. Name = " Mustafa Sezer" ! Character type, length 21 write (unit = *, fmt = *) Many, Avogadros_Number, Z, Flag, Name stop end program C01
30
program C02 use C02M implicit none ! start program C02 call Assign_2( ) stop end program C02 ! Assignment statements with variable expressions. module C02M implicit none public :: Assign_2 contains subroutine Assign_2( ) ! Type declarations with initialization: real, save :: Y = 1.23, Pi = 3.141592 integer, save :: Counts = 173 character (len = 8), save :: I = " Optics " logical, save :: Flag = .true. ! Type declarations without initialization: real :: X, Theta integer :: Many character (len = 8) :: K logical :: Done ! start subroutine Assign_2 X = Y ! Real type Y = X Theta = Pi Many = Counts ! Integer type K = I ! Character type, length 8 Done = Flag ! Logical type write (unit = *, fmt = *) Y, Pi, X, Theta, Counts, Many, I, K, Flag, Done return end subroutine Assign_2 end module C02M ! Assignment statements with arithmetic expressions.
program C03 implicit none real, parameter :: GRAVITY = 9.8 real :: Old_Vol, Old_Press, Old_Temp, New_Vol, New_Press, New_Temp real :: Mass, Velocity, Kinetic_Energy, Pressure, Density, Height, Bernoulli integer, parameter :: J = 6 integer :: I ! start program C03 I = J + 1 write (unit = *, fmt = *) I read (unit = *, fmt = *) Old_Vol, Old_Press, Old_Temp, New_Press, New_Temp New_Vol = Old_Vol * (Old_Press / New_Press) * (New_Temp / Old_Temp) write (unit = *, fmt = *) Old_Vol, Old_Press, Old_Temp, New_Vol, New_Press, New_Temp read (unit = *, fmt = *) Mass, Velocity Kinetic_Energy = 0.5 * Mass * Velocity ** 2 write (unit = *, fmt = *) Mass, Velocity, Kinetic_Energy read (unit = *, fmt = *) Pressure, Density, Velocity, Height Bernoulli = Pressure + Density * (0.5 * Velocity ** 2 + GRAVITY * Height) write (unit = *, fmt = *) Pressure, Density, Velocity, Height, Bernoulli stop end program C03
top related