ninja fastening tool - texas stucco supplyninja drive pin with angle clip and washer light weight...
Post on 20-Oct-2020
2 Views
Preview:
TRANSCRIPT
-
Features and Benefits
Technical Data(Patent Pending)
Items Description Holding ValuesAllowable load / Ultimate loadNinja drive pin with angle clip and washer
Light weight withdecking 3000 PSI 4000 PSI
Item# Shank Dia. Shank length Tension(lbs)Tension
(lbs)Shear(lbs)
Shear(lbs)
NC100NC125S
0.157’’/0.167’’
1’’1-1/4’’
372/1860352/1767
175/957157/861
329/1644296/1479
377/1885358/1790
Lowest noise (db) level of any powder tool on the marketConsistent low noise even in fractured concreteOne pin and clip allows usage in multiple applicationseliminating need for multiple inventories and moreflexibility in pre-tying wires for jobs.Heavy duty shank for higher holding strengthsLightest celing tool weighing under 3-1/2 lbs.No recoil, reducing operator fatigueNo piston to wear or break, ensuring low maitenanceallowing longer tool operation.Simple and light weight to operate with adjustible lengthpole.Specially designed rubber handle makes it comfortableand non-conductive.Tool & pin provide dual guidance system to ensurecontinued straight driving penetration into work surface.Unique power venting system prevents overdrive andensures consistent fastening into varible substrates,providing 1-1/4’’ penetration into soft or hard concrete.The pin and clip, as well as the slim profile tool designallows for threaded rod, pencil rod and wire to hangstraight down allowing fastening in congested areasUse’s standard PATMI 22 cal straight wall powder loads.
New
Ninja Fastening Tool
-
Ninja Fastening Tool
.307" dia head, slim groove shank NJ pin w/NJ clip 1000.307" (7.8mm) dia head, smooth shank NJ pin w/NJ clip 1000
.307" (7.8mm) dia head, step shank NJ pin w/NJ clip 1000
.307" (7.8mm) dia head, step shank NJ pin with 1/4"-20 & 3/8"-16 all thread rod hanger clip 500
.307" (7.8mm) dia head, .157" (4mm) dia. shank, 1" slim groove shank length NJ pin
1000
.307" (7.8mm) dia head, smooth shank NJ pin 1000
.307" (7.8mm) dia head, step shank NJ pin 1000
No.
Aluminum Adjustable Mul func on Ceiling Pole – 4' to 8'
Aluminum Adjustable Mul func on Ceiling Pole – 4' to 12'
Aluminum Adjustable Mul func on Ceiling Pole – 6' to 12'
Aluminum Adjustable Mul func on Ceiling Pole – 6' to 18'
Aluminum Adjustable Mul func on Ceiling Pole – 8' to 24'
NJ-100 .22cal. Single shot Ninja ceiling tool for 1" NJ pin
.22cal. Single shot Ninja ceilingNJ-125
Ninja Mul func on Pole
Ninja Angle Clip Pin
.22cal straight wall single
5.6*15
6
100 1000
100
100
1000
1000
10005
4
3 100
IItem No.
patent pending
patent pending
patent pending
patent pending
patent pending
patent pending
Ninja Fastening Tool page 1Ninja Fastening Tool page 2
top related