noda kigata philippine corporation company profile

NODA KIGATA PHILIPPINE

CORPORATION

Established since 1980 More than 35 years with experience 180 employee (Feb/2016)

OSAKA HeadquartersCHUBU BranchTOKYO BranchKYUSYU Office

Hanoi BranchBangkok Branch

About us

PHILIPPINESSanto Tomas Batangas

Company Overview

Noda Kigata Philippine is the latest addition to Noda, Co. Ltd. We are a newly registered corporation business created under the Philippines Laws on July 3, 2014 with SEC Registration No. CS201412076.

Our main office is located in Osaka, Japan. Together with other branches in Tokyo, Nagoya and Chubu in Japan. We also successfully expanded our operation in Vietnam and Thailand.

We manufactures the highest quality die cuts for automotive, electronics and printing companies along with many other industries. Our die is good for packing, gasket, rubber, sponge, felt, joint sheet and many others.

Company InformationCompany Name: NODA KIGATA PHILIPPINE CORPORATIONAddress: Bldg. U-6B Lot 22-B Phase 1B, First Philippine

Industrial Park – Special Economic Zone,Tanauan City, Batangas

President: Takamasa NodaPlant Manager: Atsuki KawashitaGeneral Manager: Yusaku KatoFounded: March 1, 2015Paid up Capital: 13 MillionTIN: 008-804-169Email Address: noda-philippines@kigataya.com

Product

*Thomson Die

*Chrome Die (Pinnacle)

Prospective Industry*Electric

parts *Automotive *Printing

*Package *Vacuum tray

Thomson Die

*High quality

*Tolerance ±0.2mm

*high performance for pressing production

Base for Thomson Die*High quality plywood on coating＊ preserve the quality＊ reduce wood chips

*Plastic Base＊ Acrylic＊ PP

Stock by coating plywood21t , 18t , 15t , 12t

Stock by ABS18t,15t,10t,8t,6t,4t,3t,2t,1tPP6t , 8t

Coating wood

ABS

Blade Maker＊ NAKAYAMA ＊ TSUKATANI

Details of Blade*Height

*Thickness

＊ 6H , 8H , 10.5H, 12H＊ 22.8H ~ 23.6H＊ 30H ~ 100H

＊ 1.3pt (0.45mm)＊ 2.0pt (0.71mm)＊ 3.0pt (1.05mm)Other…

Details of Blade

Center bevels Side double bevels

Double and triple long

bevels

Special Type of Blade*MIR sharp cutting

*Non adhesive

NAKAYAMA MIR-Series TSUKATANI G-Series

NAKAYAMA Silky Coat TSUKATANI B-Blast

*Other Perforating rules Creasing rules Wave rules etc

Type of Punch

Round Punch(KURINUKI)

Spring Punch(BANE)

Gasket punch (TEPPO)

Side Punch Special Punch

φ1~φ40 Φ1~φ12 Φ1~φ30 Φ1~φ10 Build to order

◯ 0.1~ △check required △check required △check required Choose anything

◯ △check required × × Choose anything

23.5h , 23.6h , 32h

× 23.6h , 32h 23.6h , 32h Choose anything

Stock

FractionSide bevelHeight

Work Flow Thomson Dieorder

make drawing

cutting baseboard for LASER CUTTING MACHINE

Bending blade for BENDING MACHINE

assembling

check by half cut balance

check by Die dimension

Processing the double-sided tape in press machine and checking the balance of half cut are in place.

Our aiming “customers can be used products immediately without the adjustment.”

Quality Control (Half Cut)

We attach the dimension test results by measuring instrument.

Customer can be use our create products with confidence. It is possible to inspect the products after cutting.

Quality Control (Inspection)

Chrome Die (Pinnacle)

＊ In terms of cutting , Thomson Die and Chrome Die are highly accuracy.＊ Tolerance under ±0.03 mm .＊ HRC50° Stainless steel (with hardening)＊ Maximum size 250x450

Detail of Chrome Die

A (total height)

B (Blade height)

C (edge angle)

A (Total height)

0.8t , 1.0t , 1.2t , 1.5t , 2.0t , 2.3t

B (Blade height)

0.4t , 0.6t , 0.8t , 1.1t , 1.5t , 1.8t

C (edge angle) 30° , 40° , 50° , 60° 　 can make side bevel

Work Flow Chrome Dieorder

make drawing

etching for ETCHING MACHINE

make blade edge for MEELING MACHINE

check by half cut balance

check by DIE dimension

Production range by Chrome Die0.8t0.4tangle

30° 40° 50° 60°Smallest gap

between the blades 0.6 0.7 0.8 0.9Smallest R 0.3 0.4 0.4 0.5Smallest φ Similar smallest gap between blades

1.2t0.8tangle

30° 40° 50° 60°Smallest gap

between the blades 0.9 0.9 1.1 1.3Smallest R 0.4 0.5 0.55 0.65Smallest φ Similar smallest gap between blades

2.0t1.5tangle

30° 40° 50° 60°Smallest gap

between the blades 1.5 1.6 1.6 1.7Smallest R 0.4 0.5 0.55 0.65Smallest φ Similar smallest gap between blades

We are glad and greatly honored having business with you and we do hope for a long term business

relationship between us.

For details more details, please visit our website:

www.kigataya.com

Thank you very much...

NODA KIGATA PHILIPPINE

CORPORATION