non-stick grey - abratekabratek.dk/userfiles/downloads/uk/non-stick_engelsk-(1).pdf · non-stick...

Non-Stick Grey

ABRATEK Non-Stick GreySilicone-epoxy coating with unique grinding characteristics for coal, wood, concrete, fiberglass and metals and most plastics including epoxies.

Surface requirementsABRATEK Non-Stick Graphite can only be used on clean and dry surfaces, initially grit blasted. Grit blasting quality SA2, Alusilikat or corundum grain size 0.5 – 0.3 mm.

Application examplesPipe, rotary valves, rollers, silos, electric filter boxes and other applications where material accumulations of sticky materials is a challenge.

TURN

ABRATEK Non-Stick Grey● Silicone-epoxy water-based● Color: Light grey● Consumption 1 liter = 1 m² by layer thickness of 1.2 mm● Surface drying time: 60 min. at 20 °C● Hand dry: 2 hours● Full hardness 5 days at 20 °C or 30 min. in an oven at 150 °C● Tensile strength: 1750psi● Operating temperature: 135 °C

Non-Stick Blue

TURN

ABRATEK Non-Stick BlueEpoxy-silicone coating with unique grinding characteristics for adhesives and other sticky materials.

Surface requirementsABRATEK Non-Stick Graphite can only be used on clean and dry surfaces, initially grit blasted. Grit blasting quality SA2, Alusilikat or corundum grain size 0.5 – 1.0 mm.

Application examplesPipe, rotary valves, rollers, silos, electric filter boxes and other applications where material accumulations of sticky materials is a challenge.

ABRATEK Non-Stick Blue● Silicone-epoxy water-based● Color: Light blue● Consumption 1 liter = 1 m² at 1.2 mm layer thickness● Surface drying time: 60 min. at 20 °C● Hand dry: 2 hours● Full hardness 5 days at 20 °C or 30 min. in an oven at 150 °C● Tensile strength: 1750psi● Operating temperature: 135 °C

Non-Stick Graphite

ABRATEK Non-Stick GraphiteEpoxy-silicone coating with unique grinding characteristics for limestone, chalk, wood, concrete, fiberglass, metals, as well as most plastics including epoxies.

Surface requirementsABRATEK Non-Stick Graphite can only be used on clean and dry surfaces, initially grit blasted. Grit blasting quality SA2, Alusilikat or corundum grain size 0.5 – 1.0 mm..

ApplikationseksemplerPipe, rotary valves, rollers, silos, electric filter boxes and other applications where material accumulations of sticky materials is a challenge.

TURN

ABRATEK Non-Stick Graphite● Silicone-epoxy water-based● Colour: Black● Consumption 1 liter = 1 m² at 1,2 mm layer thickness● Surface drying time: 60 min. at 20 °C● Hand dry: 2 hours● Full hardness 5 days at 20 °C or 30 min. in an oven at 150 °C● Tensile strength: 1750psi● Operating temperature: 135 °C