northern corporation assignment
Post on 01-Dec-2015
54 Views
Preview:
TRANSCRIPT
Declaration
We attest that this report is totally our own work, except where we have given
fully documented references to the work of others and that the materials
contained in this report have not previously been submitted for assessment in
any formal course of study.
We think that we are the 1st group, which have gone 1st at Northern Knit
Limited from any other group of our class. And finally we are able to prepare
this report after 1.5mounths hard working.
If we do anything, which is going to breach the first declaration, the
examiner/supervisor has the right to cancel my report at any point of time.
DEPARTMENT OF TEXTILE ENGINEERING 1
Acknowledgement
At first we like to express our heart-felt thanks to Almighty Allah for his kind good
thing for completion of the Industrial successfully. We would like to thank the people,
who have made a significant contribution to make this report. Their guide lines,
suggestions & idea helped us a lot. We would like to express our deepest approval,
sincerest gratuity to our respected teacher Lecturer, Department of Business
Administration, for his kind and dear guidance, suggestion, support and helpful
analysis throughout the Industrial .
We would also like to express our sincere gratuity to Md. Shohidul Islam, Senior
Production Officer (Knitting), “Northern Corporation Ltd”. For
allowing we to complete our 1 day in his factory and also for his useful guidance
through out the course.
At last but not the least, we like to acknowledge our parents for their approval,
support & love and all our friends for their help & support to complete the report.
DEPARTMENT OF TEXTILE ENGINEERING 2
Introduction
Textile and garments sector is the biggest and fastest growing sector in Bangladesh. It
is also the highest foreign currency earning sector in Bangladesh. Among this sector,
Spinning is growing very rapidly due to smaller investment requirement, greater
backward linkage facility & higher profit than yarn. That’s why export of yarn has
increasing steadily for last few years.
Textile education can’t be completed without industrial. Because this industrial
minimizes the gap between theoretical and practical knowledge and make us
accustomed to industrial environment. We got an opportunity to complete 1day in
“Northern Corporation Ltd”. It has well planned & equipped fabric dyeing-
finishing and garments units in addition to facilitate knitting and knitwear
manufacturing.
DEPARTMENT OF TEXTILE ENGINEERING 3
General Information about the Factory
Name of Company : Northern Group
Head Office & factory : Northern Corporation Ltd (Corporate office)
Regency Place, Plot-91, Block-K
Suhrawardy Avenue, Baridhara.
Telephone: 880-2-9882516, 9882517, 9882607
Fax: 880-2-9882610
E-mail: info@northernbd.com
Northern Knit Ltd (Factory)
B43-45, Bicic I/E Tongi, Gazipur.
Telephone: 880-2-9810483, 9802367
Fax: 880-2-9800338
E-mail: til@northernbd.com
Nature of Company: 100% export oriented, exporting the knit Apparels all over the world
Name of the contact persons : Md. Shohidul Islam; Senior Production Officer (Knitting) Mob: 01712907173
Total employees : 6579 persons
DEPARTMENT OF TEXTILE ENGINEERING 4
Vision & Mission Of this Group
“NCL Want To Be Te Most Preferred Name To There Customers, Employees,Suppliers And Society”
*NCL will slaws strive for Best Quality*NCL will give highest priority to our commitment*NCL will turn Human Resources into Best Asset*NCL work for Society and Environment*NCL Everywhere they increases there efficiency by 10% every year
OTHER FACILITIES
Facilities :
MAJOR ACHIEVEMENT:
BATEXPO_2009_Award
DEPARTMENT OF TEXTILE ENGINEERING 5
Organizational Structure of NCL
DEPARTMENT OF TEXTILE ENGINEERING 6
Managing Director
A.G.M(Administration)
Sr. ComplianceOfficer
Senior Officer
General Manager
Officer
Asst.Officer
Clark
Office Boy
A.G.M (Knitting)
Asst. Manager
Supervisor
Sr. Fitter
Fitter
Sr. Operator
Operator
Trainee Operator
Helper
Manager(Dyeing
&Finishing)
Asst. Manager
Senior Production officer
LabIn Charge
Asst.Lab In Charge
Technician
TraineeTechnician
DyeingIn Charge
Supervisor
Asst.Supervisor
Sr. Operator
Operator
Finishing In Charge
Supervisor
Asst.Supervisor
Operator
Helper
Helper
ProductionManager
(Garments)
Annexure -A
A.G.M(Mechanical & Electrical)
Asst. Manager
In Charge
Sr. Electrician /Sr. Mechanic
Mechanic
Helper
Manager(Merchandising)
Sr. Merchen -
diser
Merchandi-ser
Asst. Merchen-
diser
TraineeMerchand
-iser
Production Manager (Garments)
Cutting Section
Sample MakingSection
SampleIn charge
Helper
Sample Maker
Manager Pattern Master
Cutting In charge
Cutting supervisor
Cutting Man
Helper
Sewing Section
.Finishing Section
APM
Floor In charge Floor In charge
Helper
Line Chief
Supervisor Line Q.C
Operator
Q.C Officer
Q.C In charge
Inspector
FinishingIn charge
Assort man
FinishSuperviso
r
Packingman
Production Planning & Control
Basic procedure of Production Planning and Control:A planned work brings success. With out planning nothing is complete within the required time. So planning has its own importance which is intolerable. Planning gives a scheduled task and control completes it successfully. But production planning and control is not an easy task. Its basic working procedure is as follows-
Order received by marketing division↓
Analyzing the orders↓
Planning for knitting↓
Planning for dyeing↓
Planning for finishing the fabric↓
Planning for garments
It is only a basic procedure. It may change according to the type of order. Sometimes the order is placed only for finishing the materials or only for dyeing the goods. Then some steps are minimizing for planning.
Taking order from marketing division:
NKL marketing division supplied fabric orders to the planning and control division by a specific format.
Analyzing the orders: After getting the fabric order, this section analyzes the orders according to buyers order quantity, type of orders (i.e. type of fabric, color to be dyed etc.), delivery date etc. This section plans for required quantity of fabric to be knitted (order quantity + 10% of the order quantity), knitting balance, fabric to be dyed, dyeing balance, RFD (ready for delivery), RFD balance, delivery fabric & delivery balance etc.
Planning for knitting: This section plans for knitting production. Following parameters are important for the planning of knitting the fabric – » Order quantity (required amount of fabric to be knitted) » Type of fabric to be knitted (S/J, rib, interlock) » No of machine to be used » Type of yarn used » Fabric GSM, width etc
DEPARTMENT OF TEXTILE ENGINEERING 7
Remarks: The costing of the product is most secret matter of the Industry. They are not interested to flash the cost related data. So we could not collect the Costing process of the products.
Production Capacity
Item Capacity per Day
Knitting
Single Jersey/ Pique 2,660 kgs
Interlock 1,800 kgs Rib 1,450 kgs
Side Interlock Rib knit Jersey
Face
Back
Different Types of Knitting Machine
DEPARTMENT OF TEXTILE ENGINEERING 8
Fig: SINGLE JERSEY M/C Fig: INTERLOCK M/C
Fig: FLAT-BED M/C
DEPARTMENT OF TEXTILE ENGINEERING 9
Fig: RIB M/C
Single Jersey
A generic name applied to knitted fabric made on one set of needles. The characteristic may be varied to achieve the desired end-use or patterned used.
Features:1. Produce by single set of needle.2. Its technical face is smooth & V shape will show in the wales.3. Tendency of curling yarn.4. It has laddering problem
5. Un roving can be prevented by binding off.
Uses: Under garments clothing.
Looping Diagram: Graphical Representation:
DEPARTMENT OF TEXTILE ENGINEERING 10
Sample Attachment:Lacust (Single Jersey)
Sample Attachment:Lacust (Single Jersey)
Sample Attachment: Slub (Single Jersey)
Sample Attachment: Slub (Single Jersey)
Rib kn Rib
A double-knit fabric in which the rib Wales or vertical rows of stitches intermesh alternatively on the face and the back of the fabric. Rib knit fabrics have good elasticity and shape retention, especially in the width.
Features: It is normally knitted with two sets of needles. Vertical cord appearance. 1x1 rib has the appearance of the technical face of plain fabric. The technical face & back side of the Rib structure are as the
same. No carling tendency. Uses: Socks, Cuffs, Waist bands, Collars, Men’s outwear,
Knitwear, Underwear etc.
Looping Diagram: Graphical Representation:
DEPARTMENT OF TEXTILE ENGINEERING 11
Sample Attachment: Rib (PAI LUNG)
Sample Attachment: Rib (PAI LUNG)
Sample Attachment: Rib (Unitex m/c)
Sample Attachment: Rib (Unitex m/c)
Interlock A double face knit fabric with 1x1 rib on each side. Usually firm and closely knit.The stitch variation of the rib stitch, which resembles two separate 1 x 1 ribbed fabrics that are interknitted. Plain (double knit) interlock stitch fabrics are thicker, heavier, and more stable than single knit constructions.
Features: 1. Interlock has the technical face of plain fabric on both sides. 2. Reverse loop is not seen.
3. It can be UN roved from the end point. 4. Produced fabric is thicker, heavier & narrower than rib 5. No curling tendency. 6. Produce two half gauge 1x1 courses 7. Reverse loop is not seen.
Uses: Under garments clothing.
Looping Diagram: Graphical Representation:
DEPARTMENT OF TEXTILE ENGINEERING 12
Sample Attachment: Interlock
Sample Attachment: Interlock
PK fabric A knitted cotton fabric with a waffle, or diamond-shaped, pattern. French piqué knits became an international favorite when René Lacoste, a 1920's French tennis champion, designed the polo shirt. Also called Lacoste
Features:1. Fabric Thickness: 0.6-3.0mm.2. Durable, keep in shape, keep no stinking.3. Well ventilated, hygienic.4. Good elasticity, High tensile, smooth surface.5. Without azobenzene or heavy metal.6. 100% Polyester.
DEPARTMENT OF TEXTILE ENGINEERING 13
Sample Attachment: PK fabric
Sample Attachment: PK fabric
Fleece fabric This is a knit fabric, usually in cotton or poly cotton that has napped terry loops on one or both sides. There are several variations that and finish types for fleeces.
Features:1. Fleece is a man-made fabric.2. Fleece is a woolen-type fabric made from synthetic fibers, usually 100 percent
polyester.3. Although it can also be combined with natural fibers such as wool and cotton
or other man-made materials including spandex or rayon.4. Some fleece fabrics are treated with chemicals to make them waterproof, or
Teflon, as well. 5. It is easy to sew and launders well. It is machine washable and dries quickly
because of its construction and is therefore also water repellent.6. Fleece should not be washed in hot water, and tumble drying should be
avoided.7. One of the least appealing features of fleece fabric is that it attracts pet and
human hair, lint and dust.8. Fleece fabric is used to make blankets and throws and is often sewn into
workout clothes, outdoor clothing, sweatshirts/hoodies, jackets, hats, scarves, and other functional and fashionable attire
DEPARTMENT OF TEXTILE ENGINEERING 14
Sample Attachment: Fleece fabric
Sample Attachment: Fleece fabric
Conclusion
The mid Course industrial training give us first opportunity to work into the mills during our fort year course in textile technology. We are very much fortunate that we get change to do our industrial attachment such a renowned spinning mills Northern Textile Mills LTD.
Northern Textile Mills LTD was set up at Tongi, Gazipur at 6.5 km north side from Dhaka the capital city.Since the Northern Knit LTD contain to aim for near height and as a result registered a phenomenal growth both in term of production and sales.
Count ranging from 26-50 Ne of cotton .We wish this company will contribute our natural economy more efficiency and we hope this practical knowledge we have achieved during this training period will be helpful for us in our future life.
DEPARTMENT OF TEXTILE ENGINEERING 15
Limitations of the report
Because of secrecy act, the data on costing and marketing
activities have not been supplied. We had a very limited time. In spite of our willing to study more it
was not possible to do so Some points in different chapters are not included as these were not
available. It is not possible to hold the whole thing of a textile industry in
such a small frame as this report. So, try our hard to summarize all the information that we are provided.
Lastly:
We are lucky enough that we have got an opportunity to get industrial
training at NORTHERN KNIT LIMITED. During this very short period we have
visited different section of the mill and received enough co-operation and support
from the authority and all the personnel of different sections. Here, all the officers
and the stuffs are very cordial and very much devoted to their duties, which is also
learning for us.
DEPARTMENT OF TEXTILE ENGINEERING 16
-------------------------------------
DEPARTMENT OF TEXTILE ENGINEERING 17
top related