officine meccaniche gallaratesi. leader on dosing systems omg … officine meccaniche gallaratesi
Post on 14-Jan-2016
259 Views
Preview:
TRANSCRIPT
OFFICINEMECCANICHE GALLARATESI
OFFICINEMECCANICHE GALLARATESI
LEADER on DOSING SYSTEMS
OMG …OMG …
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
OMG controlled volume pumps
LEADER on DOSING SYSTEMS
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
PLUNGER pumps
DOUBLE DIAPHRAGM
pumps
LEADER on DOSING SYSTEMS
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
DOXA plunger and double diaphragm typeAPI 675 plunger and double
diaphragm metering process pumps, designed to assure the greatest reliability in heavy duties.Metering accuracy better than 1% within the normal operating range of 10 / 100% of rated capacity
Two series available
DOXA.L, max allowable thrust: 2.000 N (design 2.500 N)DOXA.M, max allowable thrust: 7.000 N (design 9.000 N)
LEADER on DOSING SYSTEMS
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
Double diaphragms sandwich type arrangement available; diaphragms are hydraulically actuated, by means of an hydraulic circuit with relief and replenishment valves
Manual or automatic stroke control, with pump idle or operating; linear adjustment scale with local reading display
DOXA plunger and double diaphragm type
LEADER on DOSING SYSTEMS
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
DOXE plunger and double diaphragm type
API 675, heavy duty process metering pumps, plunger and double diaphragm type, for large capacity and high pressure.
Metering accuracy better than 1% throughout the normal operating range of 10 – 100% of capacity
Two series available
DOXE-2 with max. allowable plunger thrust 10.000 N
DOXE-3 with max. allowable plunger thrust 30.000 N
LEADER on DOSING SYSTEMS
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
DOXE plunger and double diaphragm type
Plunger type execution available either in single acting or double acting arrangement, covering an extremely large capacity/ discharge pressure range
Double diaphragm type liquid end available; diaphragms sandwich type arrangement, with an intermediate oil film and with facility for fitting an alarm probe
LEADER on DOSING SYSTEMS
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
IDRODOX double diaphragm typeAPI 675, versatile, precise
and noiseless, high efficiency
and double diaphragm type
metering pumps with
intermediate hydraulic control
circuit, characterized by their
structural simplicity and easy
maintenance
LEADER on DOSING SYSTEMS
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
IDRODOX double diaphragm type
Four models with capacity ranging from 20 to 600 l/h, with pressure ranging from 10 to 25 barg
Maximum allowable thrust 3.200 N
Double diaphragms, sandwich type, with an intermediate oil film
Continuous stroke adjustment, manual or automatic, with pump idle or operating, linear adjustment scale, with local reading display
LEADER on DOSING SYSTEMS
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
ECODOX plunger type
API 675, metering plunger
pumps designed for water
treatment and low-cost
applications, for safe and cost-
effective service together with
maximum reliability and easy
maintenance.
ECODOX plunger type
LEADER on DOSING SYSTEMS
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
Metering accuracy better than 1% over the normal operating range of 10 to 100% of capacity
Groupable in multiplex units
Maximum allowable plunger thrust = 1.500 N
Manual or automatic stroke control, with pump at rest or in operation; linear adjustment scale with precision vernier
LEADER on DOSING SYSTEMS
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
HOLLOW DISC rotary pumpsOperating principle
The hollow disc is set eccentrically on the pump shaft and guided by the diaphragm separating the suction from thedelivery chambers. When the shaftrotates, the disc oscillates, remainingtangent in any position to the twodiametrically opposite walls of thecasing, thus forming two mobilefluid-tight joints.In every position, the disc is radially and axially balanced. There are no radial components which could detach the disc or press it against the casing; therefore, the liquid does not tend to escape. The resultant pressure force is the same in any position so that the amount of power absorbed is always uniform.
HOLLOW DISC rotary pumps
LEADER on DOSING SYSTEMS
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
Features:
Our rotary pumps are suitable for heavy service.
Available series: U, G, L and RS
From 0.5 to 250 m3/h at max 10 barg discharge pressure
Materials: Grey Cast Iron, Nodular Cast Iron, Cast Steel, Bronze
Max operating temperature: up to 250°C
Suitable for high viscosity, heavy and thick fluids.
Self-priming pumps, operating efficiently under difficult suction conditions
Chemical Injection Dosing Packages
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
Chemical Injection Dosing Packages
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
Chemical Injection Dosing Packages
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
Chemical Injection Dosing Packages
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
Chemical Injection Dosing Packages
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
Chemical Injection Dosing Packages
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
Chemical Injection Dosing Packages
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
Chemical Injection Dosing Packages
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
Chemical Injection Dosing Packages
OFFICINE MECCANICHE GALLARATESIOFFICINE MECCANICHE GALLARATESI
OFFICINE MECCANICHE GALLARATESI
OFFICINE MECCANICHE GALLARATESI
top related