oi - deutsche telekom · oi.book seite 1 freitag, ... english français nederlands italiano...
Post on 02-Sep-2018
213 Views
Preview:
TRANSCRIPT
==!"§==Com=
T-Octopus F 200/400/600T-Octophon F 50Quick Reference Guide
oi.book Seite 1 Freitag, 24. September 2004 10:22 10
2
Connectivity Options
Connection type: UP0/E (with plug-in power supply unit)
Connection type: HFA (with plug-in power supply unit)
Connection type: HFA(Power over LAN)
1 Headset
2 Handset
3 Communication System (passing through at the plug-in power supply unit)
Plug-in power supply unit -
4 LAN connection to PC
5 LAN connection to network
6 USB-Slave - -
7 T-Octophon F key module
8 Adapter
9 USB-Master (e. g. for external keyboard)
12
3
4
5
6
7
89
oi.book Seite 2 Freitag, 24. September 2004 10:22 10
3
Operating Features
1 Operating pen
2 Handset
3 Illuminated touchscreen display
4 Function keys
5 Microphone for speakerphone mode
6 LEDs
7 Keypad
8 Navigation keys
9 Keys for telephone settings
10 Speaker
3
2
4
5
678910
1
oi.book Seite 3 Freitag, 24. September 2004 10:22 10
4
Important Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
How to activate functions. . . . . . . . . . . . . . . . . . . . . . . . . 6
Operating the Personal Telephone Directory . . . . . . . 7
Operating the Speed Dial List . . . . . . . . . . . . . . . . . . . . . 8
Important Operating Procedures . . . . . . . . . . . . . . . . . . 9
Functions and Codes (Alphabetical) . . . . . . . . . . . . . . 11
oi.book Seite 4 Freitag, 24. September 2004 10:22 10
oi.book Seite 5 Freitag, 24. September 2004 10:22 10
Important Notes
CE label
Environmental label
Never operate the telephone in an environment where there is a risk of explosion!
Never open the telephone set or an add-on unit. If any problems arise, get in touch with your service personnel.
Only use original accessories The use of other manufacturers’ accessories may be dan-gerous and will render the warranty and approval null and void.
The telephone must not come into contact with abrasive liquids or liquids which are liable to discolor it, such as tea, coffee, fruit juices or soft drinks.
The information provided in this document contains merely general descriptions or char-acteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products.An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract.
The CE symbol certifies compliance of this equipment with the EU directives 1999/5/EG.
This device has been manufactured in accordance with a certified environmental man-agement system (ISO 14001). This process ensures that energy consumption and the use of primary raw materials are kept to a minimum, thus reducing waste production.
5
Step by Step
How to activate functions
oi.book Seite 6 Freitag, 24. September 2004 10:22 10
How to activate functions... directly
Certain functions can be selected directly in the idle state, for ex-ample:
Make your selection with <> and confirm it with :.
Other functions can be selected directly in certain call situations.You dial a number but the other party is busy:
Confirm with :.or
Make your selection with <> confirm it with : and dial another number.
... via the Service Menu
First press the program/service key. You are then offered a number of selection options. Example: suppressing the number display at the called party:
Press the key.
lf Use the service code to switch to the Display Suppression function. The service codes are listed in the chapter „Functions and Codes“.
or
Press the key.
Make your selection with <> and confirm it with :.
Select again with <> and confirm with : bestätigen.
... using a function key
You can activate directly a Hicom function that you have saved on a key, for example
Press the key. The function is executed.
... in local applications
In addition to situation-dependent functions, T-Octophon F50 also lets you use and access local applications, such as the personal tele-phone directory, via the large graphics-enabled display with its touch-screen functionality.
Var. call forw. on? OK
Callback? OK
Dial again? OK
program/service
program/service
More features? OK
Display suppression? OK
Second call
6
Important Operating Procedures
Deut
sch
Engl
ish
Fran
çais
nds
oi.book Seite 7 Freitag, 24. September 2004 10:22 10
Operating the Personal Telephone Directory
Phone Personal
Personal directory
Cancel Edit Details Dial
Search by Name Sande|
Sanders, ThomasSandman, RonSmith, AndySmith, DaveSmith, Dave [2]Thompson, Jack
Function/application name
Entry fieldSelected list entry
Scroll barSoftkeys:Cancel: end display and returnEdit: open telephone directory editorDetails: display entry dataDial: call standard phone number of the entry
Display menu
Ned
erla
Italia
noEs
paño
lPo
rtug
uês
To generate an entry activation
Editor menu activation
o Enter password 123456 (if necessary)
Create new entry
o Enter a name
or
Show
Enter a name
Accept entries
o Enter call number in one of the fields
o Enter another number (if necessary)
: For standard call numbers (if necessary)
For further data (if necessary)
Save entry and
if no further entries
Exit Editor
Personal
Editor
2
A B C
Done
Next
Save
Cancel
Exit
To search for and dial an entry activation
Limiting a search:
o Enter the name
or
Show
Enter the name
Accept entries
Scroll list (if necessary) and select the entry
Viewing a selected entry
To display data
For further data (if necessary)
Dialling the selected entry
+ n
Personal
A B C
Done
Details
Next
Dial
7
Important Operating Procedures
oi.book Seite 8 Freitag, 24. September 2004 10:22 10
Operating the Speed Dial List
Exit Edit Back to menu
Phone Ext. apps
Speed Dial Applet
first entry empty
entry 2 empty
Peter Miller empty
empty empty
Previous Next
1 of 5
Display menu
8 speed dial fields
Change page 1 to 5Softkeys:Prog.Stop: end applicationEdit: change to Edit modeBack to menu: end Java environment
Page 1 of 5 (further fields on the pages 2 to 5 = altogether 40 speed dial fields)
Function/application name
Creating/changing/deleting an entry Click on Register
Select “SpeedDialApplet“
Select and
start the midlet
Creating/changing an entry
Editor menu activation
Select a field; if necessary
select side with “Next“/“Previous“
Select “Enter Entry Manually“
Enter a name
o Enter a number
Save entry
Delete an entry
Editor activation
Select a field with entry
Select “Delete Entry“
Ext. apps
Run
Launch
Edit
empty
A B C
Save
Edit
first entry
Selecting an entry Click on Register
Select “SpeedDialApplet“
Select and
start the midlet
Select entry
n display changes to
Import an entry from ENB Click on Register
Select “SpeedDialApplet“
Select and
start the midlet and
activate the Edit Mode
Select a field
Select “Import Entry from ENB“
Select one entry from list
Change name and phone number (if necessary)
Save entry
Ext. apps
Run
Launch
first entry
Phone
Ext. apps
Run
Launch
Edit
empty
Save
8
Important Operating Procedures
oi.book Seite 9 Freitag, 24. September 2004 10:22 10
Important Operating Procedures
n = Lift the handset = Press the key
t = Replace the handset = Press the illuminated key
s = Conduct a call = Press the flashing key
dd = Enter the code o = Enter a telephone number or code
+ = To next user action
= The option appears on the screen.Press the : key to confirm your selection.
= Search for an option.Press the <> keys, until the option appears on the screen. Then press the : key to confirm your selection.
Consultation? OK
Display contrast? OK
Callingn + o call no.
or
o call no. + n
RediallingDial last no. called
n
x1 = last no. dialled
x2 = second last no. dialled
x3 = third last no. dialled
Redial
Caller listSelect call
einblenden
auswählen
Dial displayed call
Ending a calltor
Caller list? OK
Call? OK
Release
Speed-diallingDial using speed-dial no.
n
o Speed-dial no.
Individual - *0 ... *9
Central - 000 ... 999
Save individual speed-
dial no.
n
o Speed-dial no. (*0...*9)
o Ext. code + call no.
Program/Service
*7=Use speed-dialling? OK
Program/Service
*92=Change Speed-dial? OK
Change/Change entry? OK
Save/Save entry? OK
9
Important Operating Procedures
oi.book Seite 10 Freitag, 24. September 2004 10:22 10
Telephone setupChange ringer volume
u or v
u or v higher/lower vol.
Save uv together
Change ringer pitch
u or v
u or v higher/lower vol.
Save uv together
Change call volume
su or v higher/lower vol.
Save uv together
ConsultationCall second user
s 1st user call
o 2nd user call no.
End consultation
TogglingAlternating calls with
two users
s Callback conversation
Ring/Ringer volume? OK
Ring/Ringer tone? OK
Consult/Enquiry? OK
Return to held call? OK
Toggle/Connect? OK
Transferring a calls 1st user call
o 2nd user call no.
Call may be announced
t
Conferences 1st user call
o 2nd user call no.
Conf. may be announced
Call forwardingActivate
o Call no.
Deactivate
Using callbackCalled party is busy
or does not answer
Delete
Consult/Enquiry? OK
Start conference? OK
Conference? OK
Forwarding on? OK
1=all calls? OK
Save entry OK
Forwarding off? OK
Callback/Set Callback OK
View callbacks? OK
Delete? OK
Using mailboxCallback or message
is saved
or
Follow user prompts!
Save call no. on a key
poss.
o Call no.
Deactivate microphoneCall partner not permitted
to listen in
Activate
Open listeningActivate speaker
Deactivate speaker
View/Display messages? OK
Message sent/Text? OK
Call voice mail? OK
Program/Service
*91=Prog. feature key? OK
Second level
Change key/feature? OK
Repdial key? OK
Save/Save entry? OK
Mute
Mute
Speaker
Speaker
10
Functions and Codes (Alphabetical)
oi.book Seite 11 Freitag, 24. September 2004 10:22 10
Functions and Codes (Alphabetical)The table below lists all available functions as they appear on the display. Functions that have been configured (contact service personnel) can be activated interactively (select + save) via the Program/Service menu (select + save or enter a code), or by pressing function keys, provided that the functions have been configured (contact service personnel).
Functions(display)
... Interactively ... Via the Program/Service menu
... With function
keys
<> <> Code
Account code *60 X
Advisory msg. onAdvisory msg. off
*69#69
XX
Associated dial *67 X
Associated serv. *83 X
Call waitingWaiting tone offWaiting tone onCall wait.term.onCall wait.trm.off
*55
*87#87
*490#490
XXXXX
Caller ListSave number
#82
*82XX
Changeover onChangeover offChange PIN
*66#66
*93
XX
ConferenceStart conferenceAdding a party to the conferenceEnd conferenceView conf partiesRemove party
*3
#3
X
ConsultReturn to held callQuit and returnTransfer/Accept
*0
*0
Control Relay OnControl Relay Off
*90#90
XX
DISA
DND onDND off
*97#97
XX
Door opener onDoor opener off
*89#89
XX
DTMF dialing *53 X
En-bloc sendingDial
Program/Service
11
Functions and Codes (Alphabetical)
oi.book Seite 12 Freitag, 24. September 2004 10:22 10
Forwarding on1=all calls2=external calls only3=internal calls onlyForwarding offTrunk FWD onTrunk FWD offForward Line: OnForward Line: Off
*1
*11
*12
*13#1
*64#64
*501#501
XXXXXXXXX
HF answerback onHF answerback off
*96#96
XX
Hotline
Internal DISA *47 X
Join hunt groupLeave hunt groupRejoin all groupsLeave all groups
*85#85
*85*#85#
XXXX
Keypad dialing *503
Lock all phones *943 X
Monitoring *944
Mute onMute off
*52#52
XX
Night answer onNight answer off
*44#44
XX
Open door *61 X
Override *62 X
PageAnswer page
*45#45
XX
Park a callRetrieve call
*56#56
X
Phone Test *940
Pickup - directedPickup - groupAccept call
*59
*57XX
Prog. feature key *91 X
Redial X
Reject callRelease X
RelocateComplete Relocate
*9419#9419
X
Functions(display)
... Interactively ... Via the Program/Service menu
... With function
keys
<> <> Code
Program/Service
12
Functions and Codes (Alphabetical)
oi.book Seite 13 Freitag, 24. September 2004 10:22 10
Reserve trunk X
Reset services #0 X
Retrieve line *63 X
Ring Transfer: OnRing Transfer: Off
*502#502
XX
Ringer cutoff onRinger cutoff off
*98#98
XX
Ringing group onRinging group off
*81#81
XX
Room monitor *88 X
Select language *48
Send messageView sent messageDisplay MessagesMailbox
*68#68#68
XXXX
Shift Key X
Show call charges (own telephone)View call charges (other party’s telephone)
*65 XX
Speaker call *80 X
Suppress call IDRestore caller ID
*86#86
XX
Tel. data service *42
Temporary MSN *41 X
Temporary Phonel *508 X
Timed reminder onTimed reminder off
*46#46
XX
Toggle/Connect *2 X
Trace call *84 X
Transfer
Trunk Flash *51 X
Functions(display)
... Interactively ... Via the Program/Service menu
... With function
keys
<> <> Code
Program/Service
13
Functions and Codes (Alphabetical)
oi.book Seite 14 Freitag, 24. September 2004 10:22 10
UCDLog onLog offAvailableNot availableWork onWork offUCD night onUCD night offCalls in queue
*401#401
*402#402
*403#403
*404#404
*405
XXXXXXXXX
Phonebook X
Set CallbackView callbacks/Delete
*58#58
X
Use speed-dialingChange Speed-dial (station)
*7
*92XX
Functions(display)
... Interactively ... Via the Program/Service menu
... With function
keys
<> <> Code
Program/Service
14
Issued by:Deutsche Telekom AG
Right of modification reserved.Reference number: A31003-E8400-X940-2-7619SW version: 3.0Status: 09/2004Printed on environmentally compatiblerecycled paper.
The equipment referred to in these instructions conforms with the requirements of the EU directive:1999/5/EG - Directive on radio equipment and telecommunications terminal equipment and mutual recognition of conformity.Compliance with the above directive is confirmed by the CE marking affixed to the equipment.
The declaration of conformity can be viewed at:Deutsche Telekom AGGeschäftsbereich EndgeräteCE-Testlab SteinfurtSonnenschein 3848565 SteinfurtTel: 02551 10 612Mail: testlab-steinfurt@telekom.de
Important telephone numbers
For problems:
For questions regarding sales:
Upon delivery of the equipment, please enter telephone numbers!
oi.book Seite 16 Freitag, 24. September 2004 10:22 10
top related