omni-200r eddy current system - 2.imimg.com

OMNI-200REddy Current System

CoreStar International Corporation

Core Star1044 Sandy Hill Road, Irwin, PA 15642Phone: 724-744-4094 Fax: 724-744-4093Visit our website at: www.corestar-corp.com

Employs Advanced DSP TechniquesFour Frequency Simultaneous Injection Improves Response for LowFrequency Applications Including RFTSupports up to 16 Time Slots and up to Four Frequencies per Time SlotDynamic Gain Minimizes Saturated and Clipped DataImpedance Matching Improves Dynamic Range of Mismatched Probe CoilsInternal Reference Option Generates Absolute Signals without a Reference ProbeInterchangable Probe Modules Accomodate Bobbin, Driver/Pickup, Flux Leakage, RPC, and Array ProbesSixteen Isolated I/O Lines and Three Isolated Quadrature Encoder Inputs for Remote Control Functions and Material HandlingFront Panel Indicators Provide Status for Processor Function, DC Voltages, Ethernet Connectivity, Temperature, and Fault Conditions

OMNI-200R System SpecificationsPower: 100-250 VAC 50/60 HzEnvironmental: 32 – 113°F (0 to 45°C) Operating Range, -4 - 158°F (-20 to 70°C) StorageInterface: Four Port 10/100 Ethernet SwitchFrequency Range: 20 Hz to 5 MHz ET: 100Hz – 5 MHz RFT: 20Hz – 100 KHzDrive Voltage: ET: 0 – 20 Vpp RFT: 0 – 60 Vpp (300 ma Protected)System Gain: -22 to 20 db AdjustablePreamp Gain: 0-700 AdjustableFrequency Generators: 4 Multiplexed or SimultaneousChannel Capacity: Simultaneous Mode 32 Multiplexed Mode 128 Context Mode 512Impedance Matching: Improves Range of Mismatched CoilsHardware Null: Minimizes DC Offset in Multi-Coil ApplicationsSampling Mode: Time Based 100 – 10,000 s/s Distance Based: English or Metric SelectableStatus and Diagnostic: Voltage and Temperature Monitoring (Software)Input/Outputs: Sixteen Isolated I/O Lines (User Powered) Three Isolated Quadrature Encoder Inputs (User Powered)

Probe Modules Available: AM-201 Module (4 Impedance Coils and 4 Driver/Pickup Coils) Bobbin Probes RFT Probes (Up to Four Coils) Array Probes (Up to Four Coils) Includes One Channel of Reference Probe RemovalRPC Motor Output: 0-10 Volt (1.5 Amp Protected)

AM-202 Module (8 Impendence Coils) Array Probes (Up to Eight Coils) Dual Bobbin Inspection Includes Two Channels of Reference Probe RemovalRPC Motor Output: 0-10 Volt (1.5 Amp Protected) AM-203 Module (Up to 32 Differential Impedance Coils) 32 x 8 Multiplexer RCCA Probes Reactor Vessel Head Probes Up to 8 Channels of Absolute Probe Support AM-204 Module (4 Impedance Coil Inputs and 4 Current Inputs) Bobbin Probes AC/DC Inputs 4–20 or 8–40 ma Selectable Includes One Channel of Reference Probe Removal Two Isolated Quadrature Encoder Inputs (User Powered)

Standard System ContentsOMNI-200R with One (1) Probe Module Power CordOperating GuideCertificate of CalibrationShipping Case