outside air pressure pickup port c16oa static pressure pickup port accessories for hvac/r 02012018...

Next level building automation engineered to help you make smart decisions.

1150 Roberts Boulevard, Kennesaw, Georgia 30144770-429-3000 Fax 770-429-3001 | www.automatedlogic.com© Automated Logic 2017

OA Static Pressure Pickup PortAccessories for HVAC/R

02012018

Automated Logic’a Outside Air Pressure Pickup Port is an easy,

economical and attractive way of measuring outdoor static pressure.

The pickup port also helps stabilize readings because it significantly

reduces the pressure fluctuations caused by wind gusts. Differences

in building pressure are caused by the operation of supply fans

or exhaust fans and usually measure less than .1 inches of water

column (W.C.). A gentle breeze of 10 MPH provides a pressure of .048

inches W.C., while a strong wind of 40 MPH provides .772 inches W.C.

A gale of 75 MPH can measure over 2.7 inches. BAPI’s pickup port

significantly reduces these wind pressures for a stable and accurate

reading at the pressure sensor and controller.

The unit is also very rugged with a UV-resistant and flame-

retardant housing to perform and last under harsh conditions.

It is available in Rooftop or Wall Mount or Vertical Mount for

building soffits or ceilings.

C16Zone Pressure Sensors (ZPS)

Building Automation Products, Inc. • 750 North Royal Avenue, Gays Mills, WI 54631 USATel: +1-608-735-4800 • Fax: +1-608-735-4804 • Email: sales@bapihvac.com • Web: www.bapihvac.com

Outside Air Pressure Pickup Port

Specifications

Rooftop or Wall Mount

EnvironmentalOperation Range: Temperature: -40 to 212 °F (-40 to 100 °C) Humidity: 0% to 100% RH, condensing

Material: UV-resistant plastic

l Rooftop, Wall or Vertical Mountl Helps Stabilize Readings by Reducing

Fluctuations from Wind Gusts

BAPI’s Outside Air Pressure Pickup Port is an easy, economical and attractive way of measuring outdoor static pressure. The pickup port also helps stabilize readings because it significantly reduces the pressure fluctuations caused by wind gusts. Differences in building pressure are caused by the operation of supply fans or exhaust fans and usually measure less than .1 inches of water column (W.C.). A gentle breeze of 10 MPH provides a pressure of .048 inches W.C., while a strong wind of 40 MPH provides .772 inches W.C. A gale of 75 MPH can measure over 2.7 inches. BAPI’s pickup port significantly reduces these wind pressures for a stable and accurate reading at the pressure sensor and controller. The unit is also very rugged with a UV-resistant and flame-retardant housing to perform and last under harsh conditions. It is available in Rooftop or Wall Mount or Vertical Mount for building soffits or ceilings.

Features & Options

Rooftop Mount or Wall Mount

(Conduit and tubing not included)

Part Number DescriptionZPS-ACC10............ Rooftop or Wall Mount UnitZPS-ACC10-V ........ Vertical Mount Unit

Patent Pending

Vertical Mount

Rev. 12/19/16

Ordering Information

C16Zone Pressure Sensors (ZPS)

Building Automation Products, Inc. • 750 North Royal Avenue, Gays Mills, WI 54631 USATel: +1-608-735-4800 • Fax: +1-608-735-4804 • Email: sales@bapihvac.com • Web: www.bapihvac.com

Outside Air Pressure Pickup Port

Specifications

Rooftop or Wall Mount

EnvironmentalOperation Range: Temperature: -40 to 212 °F (-40 to 100 °C) Humidity: 0% to 100% RH, condensing

Material: UV-resistant plastic

l Rooftop, Wall or Vertical Mountl Helps Stabilize Readings by Reducing

Fluctuations from Wind Gusts

BAPI’s Outside Air Pressure Pickup Port is an easy, economical and attractive way of measuring outdoor static pressure. The pickup port also helps stabilize readings because it significantly reduces the pressure fluctuations caused by wind gusts. Differences in building pressure are caused by the operation of supply fans or exhaust fans and usually measure less than .1 inches of water column (W.C.). A gentle breeze of 10 MPH provides a pressure of .048 inches W.C., while a strong wind of 40 MPH provides .772 inches W.C. A gale of 75 MPH can measure over 2.7 inches. BAPI’s pickup port significantly reduces these wind pressures for a stable and accurate reading at the pressure sensor and controller. The unit is also very rugged with a UV-resistant and flame-retardant housing to perform and last under harsh conditions. It is available in Rooftop or Wall Mount or Vertical Mount for building soffits or ceilings.

Features & Options

Rooftop Mount or Wall Mount

(Conduit and tubing not included)

Part Number DescriptionZPS-ACC10............ Rooftop or Wall Mount UnitZPS-ACC10-V ........ Vertical Mount Unit

Patent Pending

Vertical Mount

Rev. 12/19/16

Ordering Information

Part Number Description

NSB-ZPS-ACC10-A Rooftop or Wall Mount Unit

Specifications

Enclosure Material

• UV-resistant plastic

Environmental Operation Range:

• Temperature: -40 to 212 °F | (-40 to 100 °C)

• Humidity: 0% to 100% RH, condensing

C16Zone Pressure Sensors (ZPS)

Building Automation Products, Inc. • 750 North Royal Avenue, Gays Mills, WI 54631 USATel: +1-608-735-4800 • Fax: +1-608-735-4804 • Email: sales@bapihvac.com • Web: www.bapihvac.com

Outside Air Pressure Pickup Port

Specifications

Rooftop or Wall Mount

EnvironmentalOperation Range: Temperature: -40 to 212 °F (-40 to 100 °C) Humidity: 0% to 100% RH, condensing

Material: UV-resistant plastic

l Rooftop, Wall or Vertical Mountl Helps Stabilize Readings by Reducing

Fluctuations from Wind Gusts

BAPI’s Outside Air Pressure Pickup Port is an easy, economical and attractive way of measuring outdoor static pressure. The pickup port also helps stabilize readings because it significantly reduces the pressure fluctuations caused by wind gusts. Differences in building pressure are caused by the operation of supply fans or exhaust fans and usually measure less than .1 inches of water column (W.C.). A gentle breeze of 10 MPH provides a pressure of .048 inches W.C., while a strong wind of 40 MPH provides .772 inches W.C. A gale of 75 MPH can measure over 2.7 inches. BAPI’s pickup port significantly reduces these wind pressures for a stable and accurate reading at the pressure sensor and controller. The unit is also very rugged with a UV-resistant and flame-retardant housing to perform and last under harsh conditions. It is available in Rooftop or Wall Mount or Vertical Mount for building soffits or ceilings.

Features & Options

Rooftop Mount or Wall Mount

(Conduit and tubing not included)

Part Number DescriptionZPS-ACC10............ Rooftop or Wall Mount UnitZPS-ACC10-V ........ Vertical Mount Unit

Patent Pending

Vertical Mount

Rev. 12/19/16

Ordering Information