part 4 training delay - yanaligator31.files.wordpress.com filemenghasilkan delay dalam program-c...

PART 4TRAINING DELAY

Dosen : Dwisnanto Putro, ST, M.Eng

• Untuk LED ANODA : Logika 0 = led menyala

Logika 1 = led mati

• Untuk LED KATODA : Logika 0 = led mati

Logika 1 = led menyala

LED (LIGHT EMITING DIODE)

Published By Stefanikha69

Published By Stefanikha69

Published By Stefanikha69

• Delay = tunda

• Penundaan terhadap kinerja mikrokontroler

•DELAY

Published By Stefanikha69

• Menghasilkan delay dalam program-C berada pada header delay.h yang harus dimasukan (include) sebelum digunakan.

• Sebelum memanggil fungsi, interupsi harus dimatikan terlebihdahulu, apabila tidak maka delay akan lebih lama dari yang diharapkan. Juga sangat penting untuk menyebutkan frekuensiclock chip IC AVR yang digunakan pada menu Project –configure - C compiler - Code Generation.

•DELAY

Published By Stefanikha69

• Header delay

#include <delay.h>

• Perintah delay

delay_ms(------);

Waktu tunda dalam milidetik:

Misalkan:

delay_ms(1000); berarti ditunda selama 1 detik

•DELAY

Published By Stefanikha69

• Dengan system delay, menciptakan system sinyal pulsa

•DELAY

Published By Stefanikha69

•New Project

• Run CodeVision

Published By Stefanikha69

Published By Stefanikha69

• Chip select

Published By Stefanikha69

configuration chip select

• Chip ATMEGA 8535

• Clock 8.000000 Mhz

Published By Stefanikha69

• Untuk port gunakan PORTC untuk LED

PORTC.0 – PORTC.7 = output (0)

Published By Stefanikha69

• Save and Generate

Published By Stefanikha69

• Save File – make folder and files

Published By Stefanikha69

• Display

Published By Stefanikha69

•Configuration ready compile

Published By Stefanikha69

Published By Stefanikha69

•CODE PROGRAM• Untuk menyalakan led bergantian misalkan pada posisi PORTC.0,

PORTC.1 dan PORTC.2 dengan masing-masing waktu tunda selama 1 detik. (jadi waktu keseluruhan yang dibutuhkan sistem yaitu 3 detik)

while(1){

PORTC=0b11111110;Delay_ms(1000);PORTC=0b11111101;Delay_ms(1000);PORTC=0b11111011;Delay_ms(1000);

} }

Published By Stefanikha69

SETTING USB – DOWNLOADER :• INSTALL DEVICE USB DOWNLOADER

• CONNECT USB DOWNLOADER TO PC/LAPTOP

SETTING COM PORT:• COMPUTER -> MANAGE -> DEVICE MANAGER

• PORT (COM &LPT) -> PROLIFIC USB TO SERIAL COMM PORT (COM....)

Published By Stefanikha69

•Configuration PORT Programmer

Published By Stefanikha69

Choice :

• AVR Chip programmer type

• COM PORT

• BAUD RATE

Published By Stefanikha69

•COMPILER AND BUILD ALL PROGRAM

Or Shift F9

Published By Stefanikha69

• Connecting USB Downloader - PC/Laptop -Microcontroller, And....

Published By Stefanikha69

• Process Downloading.........

Published By Stefanikha69

FINISH

Published By Stefanikha69

• Error DOWNLOADING

Solution :• Check COM PORT• Check Baud Rate• Check Connection Downloader• Check Prog/Serial TTL select

Published By Stefanikha69

•CV AVR WITH PROTEUS

OPEN PROGRAM ISIS PROTEUS PROFESSIONAL

Published By Stefanikha69

•synchronization cv avr with proteus

• Creat Project and Design

• Double click pict microcntroller

Published By Stefanikha69

•synchronization cv avr with proteus

• Select clock frequency

• Select program file, (HEX file type)

Published By Stefanikha69

•synchronization cv avr with proteus

• Running ISIS Proteus

• FINISH...

Created by. Dwisnanto Putro, Manado, September 2012

Published By Stefanikha69

TASK

•BUATLAH project dengan systemled berjalan pada PORTC.7, PORTC.6 dan PORTC.5 dengan masing-masing delay 250 ms

Published By Stefanikha69

TASK

•BUATLAH project dengan systemled berjalan pada PORTC.0, PORTC.2, PORTC.4 dan PORTC.6 dengan sistem led menyala secara berurutan bergantian. masing-masing delay 100 ms.

Published By Stefanikha69

TASK

•BUATLAH project dengan system led berjalan pada PORTC.0 s/d PORTC.3. masing-masing delay 150 ms. Misalkan:

•Step 1: hanya PORTC.0 menyala

•Step 2: hanya PORTC.1 menyala

•Step 3: hanya PORTC.2 menyala

•Step 4: hanya PORTC.3 menyala

Published By Stefanikha69

TASK• BUATLAH project dengan system led berjalan pada

PORTC.1 s/d PORTC.6. masing-masing delay 100 ms. Misalkan:

• Step 1: hanya PORTC.1 mati

• Step 2: hanya PORTC.2 mati

• Step 3: hanya PORTC.3 mati

• Step 4: hanya PORTC.4 mati

• Step 5: hanya PORTC.5 mati

• Step 6: hanya PORTC.6 mati

(PORTC Yang lain menyala)

Published By Stefanikha69

TASK

• BUATLAH project dengan system led berjalan pada PORTC.0 s/d PORTC.7. masing-masing delay 100 ms. (Secara berurutan menyala dari PORTC.0 s/d PORTC.7)

Published By Stefanikha69

TASK

• BUATLAH project dengan system led berjalan pada PORTC.0 s/d PORTC.7. masing-masing delay 100 ms. (Secara berurutan menyala dari PORTC.7 s/d PORTC.0)

Published By Stefanikha69

TASK

• BUATLAH project dengan system led berjalan pada PORTC.0 s/d PORTC.7. masing-masing delay 100 ms. Misalkan:

• Step 1: PORTC.0 dan PORTC.7 ON

• Step 2: PORTC.1 dan PORTC.6 ON

• Step 3: PORTC.2 dan PORTC.5 ON

• Step 4: PORTC.3 dan PORTC.4 ON

Published By Stefanikha69

TASK• BUATLAH project dengan system led berjalan pada

PORTC.0 s/d PORTC.7. masing-masing delay 100 ms. Misalkan:

• Step 1: PORTC.0 dan PORTC.7 ON

• Step 2: PORTC.1 dan PORTC.6 ON

• Step 3: PORTC.2 dan PORTC.5 ON

• Step 4: PORTC.3 dan PORTC.4 ON

• Step 5: PORTC.2 dan PORTC.5 ON

• Step 6: PORTC.1 dan PORTC.6 ON

• Step 7: PORTC.0 dan PORTC.7 ON

Published By Stefanikha69