perforator · 2013. 12. 9. · acc. astm-e709 destructive testing 1tensile test acc. din50125...

2

PERFORATOR® Oil and Gasfield Drill Pipes

◊ API approved

◊ Upsetted pipe in grade E, X, G + S

◊ Tool joint material acc. API 5DP

◊ Dimensions up to 5 1/2“ pipe

◊ Hard banding acc. to ARNCO 100 XT, 150 XT, 300 XT Tuboscope TCS 8000, TCS Titanium

◊ Length: Range 1 – 3

◊Non-destructive testing1 Ultrasonic test acc. EN 1714 and1 Magnetic particle inspection

acc. ASTM-E709

◊Destructive testing1 Tensile test acc. DIN 501251 Bending test acc.

API SPEC 5DP, latest edition1 Charpy V-notch impact test

acc. ASTM-A370

1. Engineering 2. Pipes 3. Hardbanding

4. Friction Welding 5. Heat Treatment 6. Inspection

5DP00717-1-0051

3

Contents Pages

PERFORATOR® Drill Pipe and Tool Joint Grades 4

Dimensions of Drill Pipe with Weld-On Tool Joints 5

PERFORATOR® Drill Pipe: Dimensions and Performance Properties 6 – 27

Standard Practice for Marking Tool Joints and Drill Pipe 28

Internal Coating of Drill Pipe 29

Advantage of Internal Coating 30

Certificates 31

Rights of technical modification reserved. PERFORATOR® is a registered trademark.

4

PERFORATOR® Drill Pipe and Tool Joint Grades

Drill Pipe

Internal Upset IU

External Upset EU

Internal-External Upset IEU

acc. to API Spec. 5DP

Friction welded Tool Joints

Numbered Connections NC

Internal Flush IF

Full Hole FH

Additional requirements can be designed and supplied on request.

DRILL PIPE AND TOOL JOINT GRADES

Mechanical properties of API drill pipe grades

Grade Yield strengh Tensile strengh Elongation¹ APIpsi psi psi in 2 inches

N/mm² N/mm² N/mm² %min. min. min. min.

E-75 75 000 105 000 100 000 see Spec. 5DP515 725 690 footnote

X-95 95 000 125 000 105 000 Spec. 5DP655 860 725

G-105 105 000 135 000 115 000 see Spec. 5DP725 930 795

S-135 135 000 165 000 145 000 see Spec. 5DP930 1140 1000

Mechanical properties of API tool joint grades

Yield strengh Tensile strengh Elongation Box APIpsi psi psi Hardness

N/mm² N/mm² N/mm² Brinellmin. max. min. min.

120 000 140 000 165 000 13 285 Spec. 5DP827 965 1138

5

Dimensions of Drill Pipe with Weld-On Tool Joints

Optional with 90° shoulder on box

6

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

7

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

8

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

9

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

10

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

11

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

12

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

13

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

14

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

15

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

16

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

17

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

18

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

19

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

20

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

21

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

22

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

23

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

24

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

25

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

26

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

27

PERFORATOR® Drill Pipe: Dimensions and Performance Properties

Standard Practice for Marking Tool Joints and Drill Pipe

28

Drill Pipe Marking

The following marks are applied as standard to the drill pipe body.Paint stenciling on Pipe Body.

welding areawelding

area

Drill Pipe Bodymanufacturer

API license no.

API Logo month – yearsize

nominal weight (LB/FT)Grade

here “UP”for special upset dimensions

if applicable

here SR-InformationsL2 or L3 (PSL-2 or PSL-3)if applicable

heat code no.

Tool Joint Marking

The following marks are applied as standard to the tool joints.Die stamping on Pin and Box End.

Other marking on request.

Die stamping pin end

Die stamping box end

PERFORATOR®

PERFORATOR®

Internal Coating of Drill Pipe

29

WE OFFER TOGETHER WITH TUBOSCOPE VETCO INTERNALY COATED DRILL PIPE

The drilling fluids used today can be classified from ‘non corrosive’ up to ‘extremely corrosive’.

Since within the lifetime of a drill string, the utilization will be for all different enviroments, corrosion

caused by aggressive muds has to be considered.

Advantage of Internal Coating

30

Certificates

31

PERFORATOR GmbHBei dem Gerichte • 37445 Walkenried • Germany • Fon +49 (0)5525 / 2 01-0 • Fax +49 (0)5525 / 2 01-48

eMail: info@perforator.de • Internet: www.perforator.de

DRILL PIPES DRILLING TOOLS INJECTION TECHNIQUE FOR MINING

AND TUNNELLING