permanent lifting magnets bhp usa flyer
Post on 15-Apr-2017
70 Views
Preview:
TRANSCRIPT
FERROUS MATERIAL HANDLINGPERMANENT LIFTING MAGNETS
Dimensions are in inches. Maw = Maximum allowed weight on AISI 1020
Art - N°Maw in lbs
on flatMaw in lbs on round
MinimumThickness for100% force
DiameterMin/max
ØA B C D E
Weight (lbs)
20.01.100 220 110 0.59 1.18/7.87 4.92 2.67 2.75 2.12 1.57 9
20.01.250 550 275 0.98 1.18/7.09 7.51 3.85 3.42 2.75 1.96 21
20.01.500 1100 475 1.18 1.18/7.09 10.03 3.85 3.42 2.79 1.96 28.50
20.01.1000 2200 990 1.97 7.87/23.62 13.77 5.51 4.44 4.13 2.55 69.50
20.01.2000 4400 1790 2.36 1.57/11.81 17.32 7.08 6.69 4.92 2.36 187
20.01.3000 6600 2646 3.14 7.87/15.74 18.89 8.66 8.46 7.87 3.54 419
20.01.5000 11000 4950 3.93 7.87/15.74 21.25 14.56 12.40 9.05 3.93 882
APPLICATIONPermanent lifting magnets are used for handling of ferrous materials, both flat and round, with raw or machined surface. A 3:1 safety ratio.
exeCuTIONThis new range of lifting magnets ensures SAFE, QUICK and ECONOMIC handling.The Highest energy NEODYMIUM magnets allow to safely handle ferrous materials (no power supply required). The holding force remains constant with time.
The robust ON/OFF switch mechanism is equipped with a safety device preventing unintentional operation.
BRAILLON QUALITY SINCE 1921
«EveryonerememberstheirfirstBraillon»
FERROUS MATERIAL HANDLINGPERMANENT LIFTING MAGNETS
Braillon Magnetics ZI ALPESPACE – BP 6
73806 MONTMELIAN Cedex FRANCEPhone +33 (0)479 842 145
Fax +33 (0)479 841 449info@braillon.com
Braillon Magnetic Systems Inc.2333 Wisconsin AveDowners Grove 60515 IL – USAPhone 312.912.13.55usa@braillon.comwww.braillon.com
HOT APPLICATIONUsed for handling high temperature ferrous material. Up to 250° (482°F). A 3:1 safety ratio.
THIN SHeeT APPLICATIONUsed for handling thin steel sheet. On raw or machined surfaces. A 3:1 safety ratio.
Dimensions are in inches. Maw = Maximum allowed weight on AISI 1020
Art - N° Maw on flat Minimum Thickness for 100% force A B C D E Weight (lbs)
20.01.TF.180 397 0.39 8.07 3.86 3.93 2.56 1.97 24
20.01.TF.300 661 0.59 10.08 3.86 3.93 2.95 1.97 33
Dimensions are in inches. Maw = Maximum allowed weight on AISI 1020
Art - N°Maw in lbs
on flatMaw in lbs on round
MinimumThickness for100% force
DiameterMin/max
ØA B C D E
Weight (lbs)
20.01.HT.200 440 220 0.98 1.18/7.08 7.52 3.86 3.42 2.72 1.97 20
20.01.HT.400 880 440 1.18 1.18/7.08 10.04 3.86 3.42 2.75 1.97 35
20.01.HT.800 1760 880 1.97 7.87/23.62 13.77 5.51 4.44 4.13 2.55 80
top related