pipe catalogue for pdf - bhushan power & steel · pdf fileabout us uring four decades of...
Post on 31-Jan-2018
480 Views
Preview:
TRANSCRIPT
PIPES
TUBULAR WORLD
About us
uring four decades of existence Bhushan Power and Steel Ltd.(BPSL) has grown in to a leading business house having diversified business interests in a range of basic and value added products viz, DRI, PIG Iron, Billets, H.R. Coils, CR
Coils, GP / GC Sheets, Galvanized / Colour Coated Profiles, Precision Tubes, Black Pipe & G.I. Pipes, Cable Tape, TOR Steel, and Special Alloy Steel Round Bars, RCS Hexagons, Wire Rods and Bright Bars.
The distinctive characteristics of BPSL's philosophy and growth strategy that have set BPSL ahead of its competitors are :
- Acquire and ass imila te world class manufacturing technology.
- Strict adherence to quality standards.
- Rigorous application of metallurgical analysis and statistical process control techniques to ensure zero product nonconformity.
- Offer superior customer service for customer delight.
- Customer focus – every customer is considered as the most important partner in the supply chain focusing not only on product aspects but also on ways and means to minimize their inventory costs through reliable, just in time distribution.
We consider our associates as long term partners in progress, be fair and transparent in our dealings with them and always honour our commitments.
High quality, high technique and sincere service are the unchanged target that we aim at.
D
Manufacturing Process of Tubes (Round & Section)
The process of Tube Manufacturing starts with forming of H.R. Steel strips into Tubular shape & welding the edges under pressure using high frequency induction heating.
The basic raw material for manufacturing of pipes is H R Coils.
After receiving the raw material in Coil shape these are slitted into various widths according to requirements of Pipe Dia at Slitting machine.
After slitting the slitted coil is loaded on the uncoil er and stored in accumulator to enable the continuous running of the mill while tail end of slit is welded with the leading end of next coil with the help of MIG welding.
The strip is passed to a set of rolls to get the shape and the outer edges of strip are heated by high frequency induction coil. Outside flash of welding is removed with the help of round tool(Scarfing tool)so as to give better finish . The welded tube is again passed through a set of Rolls to get the specified tolerances on outside Diameter. Inside flash of weld can also be removed if required by the customer above 75mm outside Diameter. Our product Range is from 10.00mm NB to 200mm NB. After the pipes are made these are cut into the Required lengths with PLC Logistic Controls.
After cutting the pipes the pipes are sent to De burring machine for removal of Burr at the end to avoid any injury to the workmen.
After removing of Burr each pipe is Hydraulically tested to check the leakage in the pipe.
Various tests according to various specifications are carried out at the shop floor itself.
GALVANIZING & THREADING:
2 After hydraulic testing of pipes at 51kg/cm or as per customer requirement, the pipes are sent for galvanizing process to avoid the rusting on the
surface if required by the customer. The pipes are dipped in Hydro Chloric acid to remove the rust from the surface. After cleaning the surface the pipe is washed in running water. After washing the pipe is dipped in the solution of Zinc Chloride and ammonia Chloride to give a Base metal for Better pickup of Zinc on steel surface. The pipes are dipped in a molten zinc Bath at a temperature of
o450 C to get the proper adherent Coating.
After Galvanizing the pipes are sent for threading wherever it is required. The threading is done on the highly sophisticated machines to have the best threading to avoid any leakage on threads while laying in the use. After threading each pipe is marked with the series paint as required by BIS and bundled for dispatch.
Indian Standard American Standard British Standard Japanese Standard German Standard
IS 1161-1998 ASTM A500 BS 4360 JIS G3444/ 1994 DIN 2439 - 2441
GR A /1993 BS 7613/ 1994 --
IS-1239 ASTM A53/ 1993 BS 1387 / 1985 -- DIN 2439 - 2441
(Part 1) /2004 Elong.20% for all
Galv. 550Gms/m2
IS 9295 / 1983 ASTM A-513 BS 6323 / 1982 -- --
IS 3601 / 2006 -- BS 1775 JIS G3345 / 1983 DIN 2393 / 1994
BS 6323 / 1982
IS 4923 / 1997 ASTM A500 BS 6363 JIS G3466 / 1982 DIN 2395
GR A/1993
IS 4270 / 2001 -- BS 879 -- --
IS 3589 / 2001 -- BS 5534 -- --
IS 9537 / II -- BS 4568 -- --
IS/ISO/3183-2007 This Specification is equivalent to IS 1978 - 82 (Old Version)
EQUALENT INTERNATIONAL STANDARDS FOR VARIOUS INDIAN STANDARDS
DSC 7779
STEEL TUBES FOR ORDINARY USES IN WATER, GAS, STEAM & AIR
Conforming to IS:1239 (Part-I) 2004
Minimum Maximum
P.E. S & S P.E. S & SMM MM MM CLASS
15 21.00 21.40 2.00 14 0.95 0.96 1056 1046(1/2”) 21.00 21.80 2.60 12 1.21 1.22 826 82021.00 21.80 3.20 10 1.44 1.45 694 690
20 26.40 26.90 2.30 13 1.38 1.39 725 719(3/4”)
26.50 27.30 2.60 12 1.56 1.57 641 63726.50 27.30 3.20 10 1.87 1.88 535 532
25 33.20 33.80 2.60 12 1.98 2.00 505 500(1”)
33.30 34.20 3.20 10 2.41 2.43 415 41133.30 34.20 4.00 8 2.93 2.95 341 339
32 41.90 42.50 2.60 12 2.54 2.57 394 3891(1 /4”)
M42.00 42.90 3.20 10 3.10 3.13 322 31942.00 42.90 4.00 8 3.79 3.82 264 262
40 47.80 48.40 2.90 11 3.23 3.27 310 3061(1 /2”)
M47.90 48.80 3.20 10 3.56 3.60 281 27847.90 48.80 4.00 8 4.37 4.41 229 227
50 59.60 60.20 2.90 11 4.08 4.15 245 241(2”)
59.70 60.80 3.60 9 5.03 5.10 199 19659.70 60.80 4.50 7 6.19 6.26 161 160
65 75.20 76.00 3.20 10 5.71 5.83 175 171.51(2 /2”)
M75.30 76.60 3.60 9 6.42 6.54 156 15375.30 76.60 4.50 7 7.93 8.05 126 124
80 87.90 88.70 3.20 10 6.72 6.89 149 145(3”)
88.00 89.50 4.00 8 8.36 8.53 120 11788.00 89.50 4.80 6 9.90 10.10 101 99
100 113.00 113.90 3.60 9 9.75 10.00 102 100(4”)
113.10 115.00 4.50 7 12.20 12.50 82 80113.10 115.00 5.40 5 1 4.50 14.80 69 67
125 138.50 140.80 4.80 6 15.90 16.40 63 61(5”)
138.50 140.80 5.40 5 17.90 18.40 56 54150 163.90 166.50 4.80 6 18.90 19.50 53 51(6”)
LMHLMHLMHL
HL
HLMHL
HLMHLMHMHMH163.90 166.50 5.40 5 2 1.30 21.90 47 46
TOLERANCE
Thickness:
Light Tubes : + not limited - 8%
Medium &Heavy Tubes: + not limited - 10%
Weight:
Single Tube : + 10%(light series) - 8%
Single Tube : +/- 10%(Medium & Heavy series)
Nominal Bore
(N.B.)Outside Diameter Wall Thickness
MM*SWG
For quantities per load of 10 ton Min.: +7.5%(light series) -5.0%
For quantities per load of 10 ton Min.: +/- 7.5%(Medium & Heavy series)
Chemical Composition
As per IS: 10748 – 2004
Physical Properties
TensiIe strength : Min. 320 Mpa
Elongation % age : 20% Min. above 25 mm NB 12% Min. upto 25 mm NB
Hydro Test Pressure : 5 Mpa
NOMINAL WEIGHT
Kg / Meters
METERS / TON
* Standard Wire Gauge
INCH
HOLLOW STEEL SECTIONS FOR STRUCTURAL USE, SQUARE HOLLOW SECTION ( SHS )
Conforming to IS : 4923 – 1997
OTHER ALLOWABLE STRESS VALUES (in Mpa)
Steel Grade Min.Yield Stress Min. UTS
Yst 210 210 330Yst 240 240 410Yst 310 310 450
Note: Min.% Elongation: 10% for GR. Yst 310, 15% for GR. Yst 240 & 20% for Yst 210
e: The sizes which are not covered in the Table can also be supplied as per customer requirement (Clause – 8.1)
SHS *(DxB)
MM
THICKNESS
MM
UNIT WEIGHT
Kg/Meter Meter/Ton19 X 19 2.00 0.99 1010
2.60 1.20 833
2.90 1.30 769
25 X 25 2.00 1.36 735
2.60 1.69 592
3.20 1.98 505
32 X 32 2.60 2.26 442
3.20 2.69 372
4.00 3.19 313
38 X 38 2.00 2.18 459
2.60 2.75 364
3.20 3.29 304
4.00 3.95 253
40 X 40 2.00 2.31 433
2.60 2.92 342
3.20 3.49 287
4.00 4.20 238
49.5 X 49.5 2.60 3.69 271
3.20 4.45 225
4.50 5.95 168
60 X 60 2.60 4.55 220
3.20 5.50 182
3.50 5.96 168
4.50 7.43 135
72 X 72 3.20 6.71 149
4.00 8.22 122
5.00 10.01 100
6.00 21.69 46
132 X 132 4.00 15.75 63
5.00 19.43 51
6.00 23.01 43
150 X 150 5.00 22.26 45
6.00 26.40 38
7.00 30.44 33
180 X 180 5.00 26.97 37
6.00 32.05 31
8.00 41.91 24
4.50 11.88 84
5.40 14.01 71
100 X 100 3.60 10.64 94
4.50 13.08 76
6.00 16.98 59
113.5 X 113.5 4.00 13.43 74
5.00 16.53 60
6.00 19.53 51
125 X 125 4.00 14.87 67
5.00 18.33 55
80 X 80 3.20 7.51 133
4.00 9.22 108
5.00 11.27 89
91.5 X 91.5 3.60 9.67 103
SHS (DxB) *
MM
THICKNESS
MM
UNIT WEIGHT
Kg/Meter Meter/Ton
* D : Depth B : Breadth
End Finish: Plain Ended- Mechanically sheared, mill-cut finish without further machining.
Surface Finish: Black without any surface treatment of oiling or varnishing.
Raw Material: Sulphur content: 0.05% max. Phosphorus content:0.05% max.
General technical specification and tolerances:
Spec : IS:4923:1997
Length: 6.0m +/- 0.05mm customized length
ranging from 4m to 8m may be supplied
Thickness: For all sizes: +/- 10.0%
Outer Dimensions: 1% with a Min. of 0.5mm
Corner Squareness: 0 90 +/- 0 2
Corner Radii: Max. 3x (thickness of the section)
Weight: on individual length : +10%, -8%
on lots of 10 MT: +/- 7.5%
thStraightness: Min1:200 of any length measured along the center line (mill straightened condition) u n le ss otherwise specifically arranged
Twist Tolerance: Max. 2mm:+:0.5mm /1m length, the measured relative vertical shift of any adjacent corner of the measured by keeping one side on flat surface.
HOLLOW STEEL SECTIONS FOR STRUCTURAL USE RECTANGULAR HOLLOW SECTION ( RHS )
96 X 48 3.20 6.71 1494.00 8.22 1225.00 10.01 100
90 X 60 3.20 7.01 1434.00 8.59 1165.00 10.48 95
100 X 50 3.20 7.01 1434.00 8.59 1165.40 11.21 896.00 12.27 81
120 X 60 3.60 9.50 1054.50 11.67 865.40 13.76 73
122 X 61 3.60 9.67 1034.50 11.88 845.40 14.01 71
145 X 82 3.60 12.16 824.50 14.99 675.40 17.74 56
150 X 75 3.60 12.05 834.50 14.85 675.40 17.57 57
150 X 100 3.60 13.46 744.50 16.62 605.40 19.69 51
172 X 92 3.60 14.25 704.50 17.61 575.40 20.88 48
200 X 100 4.50 20.15 506.00 26.40 387.00 30.44 33
200 X 150 4.50 23.68 426.00 31.11 328.00 40.66 25
4.50 6.02 16666 X 33 2.60 3.69 271
3.20 4.45 2254.50 5.95 168
75 X 25 2.60 3.73 2683.20 4.50 2224.50 6.02 166
80 X 40 2.90 5.03 1993.50 5.96 1684.50 7.43 135
50 X 25 2.00 2.15 4652.60 2.71 3693.20 3.24 3094.00 3.88 258
60 X 40 2.60 3.73 2683.20 4.50 222
Conforming to IS : 4923 – 1997
RHS
MM
THICKNESS UNIT WEIGHTKg/Meter Meter/Ton
40 X 20 2.00 1.68 5952.60 2.10 4763.20 2.49 402
MM
STEEL TUBES FOR PETROLEUM & NATURAL GAS INDUSTRIES FOR PIPE LINE
Confirming to IS : 3183 - 2007
Test Pressure (MPA)
L-210 L-245
15 21.30 2.80 1.28 17.00 17.00
20 26.70 2.90 1.70 17.00 17.00
3.90 2.19 17.00 17.00
25 33.40 3.40 2.52 17.00 17.00
4.50 3.21 17.00 17.00
32 42.20 3.60 3.43 17.00 17.00
40 48.30 3.70 4.07 17.00 17.00
50 60.30 2.10 3.01 9.20 10.20
2.80 3.97 only L-1753.20 4.51 only L-175
3.60 5.03 only L-175
3.90 5.42 16.20 17.00
4.40 6.07 17.00 17.00
4.80 6.57 17.00 17.00
5.50 7.43 17.00 17.00
65 73.00 2.10 3.67 7.20 8.90
2.80 4.85 only L-175
3.20 5.51 only L-175
3.60 6.16 only L-1754.00 6.81 13.80 15.10
4.40 7.44 15.20 17.00
4.80 8.07 16.30 17.00
5.20 8.69 17.00 17.00
5.50 9.16 17.00 17.00
Nominal
Size NB
Outside
Diameter D Thickness Weight
80 88.90 2.10 4.50 6.00 6.90
2.80 5.95 only L-175
3.20 6.76 9.10 10.50
3.60 7.57 only L-175
4.00 8.37 11.30 13.20
4.40 9.17 12.50 14.60
4.80 9.95 13.60 15.905.50 11.31 15.60 17.00
MM MM MM Kg/Mtr.
100 114.30 2.10 5.81 4.60 5.30
2.80 7.70 6.10 7.10
3.20 8.77 7.00 8.10
3.60 9.83 7.80 9.10
4.00 10.88 8.70 10.10
4.40 11.92 9.60 11.10
4.80 12.96 10.40 12.10
5.20 13.99 11.30 13.20
5.60 15.01 12.20 14.20
125 141.30 2.10 7.21 3.70 4.30
3.20 10.90 5.60 6.50
4.00 13.94 7.00 8.20
4.80 16.16 8.40 9.80
5.60 18.74 9.80 11.50
150 168.30 2.10 8.61 3.10 3.90
2.80 11.43 4.10 4.80
3.20 13.03 4.70 5.50
3.60 14.62 5.30 6.20
4.00 16.21 6.50 7.40
4.40 17.78 7.10 8.10
4.80 19.35 7.70 8.90
5.20 20.91 8.30 9.60
5.60 22.47 9.40 11.00
200 219.10 4.80 25.37 5.52 8.06
5.60 29.48 6.44 9.40
6.40 33.57 7.36 10.75
7.00 36.61 8.05 11.76
7.90 41.14 9.09 13.27
8.20 42.65 9.43 13.77
Test Pressure (Mpa)
L-210 L-245
Nominal
Size NB
Outside
Diameter D Thickness WeightMM Kg/Mtr.INCH
(1/2”)
(3/4”)
(1”)
1(1 /4”) 1(1 /2”)
(2”)
1(2 /2”)
(3”)
(4”)
(5”)
(6”)
MM MM
(8”)
INCH
TOLERANCES
OUTSIDE DIAMETER:
Less than 60.3mm +0.4mm-0.8mm L-175 0.21 Max 0.60 Max 0.03 Max 0.03 Max
More than 60.3mm +/-0.0075D
Thickness:
Less than 5.00mm +/-0.5mm5.00mm to 15mm +/-0.1T Radious of Bend: -6D
Weight:
Gd 175'175P'A-25 +10%-5% Distance between plates: -50% of OD(For Weld)
Gd 210,45 +10% 33% of OD(For metal)-3.5%
Lot Size +/-1.75%
Height of inside Beed: Max. 1.5mmAngle of Bevel: o o o30 + 5 – 0
Straightness: 0.2% of length
PHYSICAL PROPERTIES
Grade YST(Min.) TS(Min.)L-175 175 Mpa 310MpaL-210 210 Mpa 335 MpaL-245 245 Mpa 415 Mpa
Elongation %age: A' = Ao2/U0.9XCC' = 1940 Xc Cross Section Area
Grade C% Mn% S% P%
L- 210 0.22 Max 0.90 Max 0.03 Max 0.03 MaxL-245 0.26 Max 1.20 Max 0.03 Max 0.03 Max
Bend Test:
oAngle Of Bend: -180
Flattening Test:
Non Destructive Test:
Referance Hole:-1/8”
CHEMICAL COMPOSITION
STEEL TUBE FOR STRUCTURAL PURPOSE
Confirming to IS : 1161 - 1998
Outside Nominal WeightDiameter Thickness Black Tubes
D T Plain EndMM MM SWG Kg/Meter Meter/Ton
L21.30 2.00 14 0.947 1056M 2.60 12 1.210 826H 3.20 10 1.440 694L26.90 2.30 13 1.380 725M 2.60 12 1.560 641H 3.20 10 1.870 535L33.70 2.60 12 1.980 505M 3.20 10 2.410 415H 4.00 08 2.930 341L42.40 2.60 12 2.540 394M 3.20 10 3.100 322H 4.00 08 3.790 264L48.30 2.90 11 3.230 310M 3.20 10 3.560 281H 4.00 08 4.370 229L60.30 2.90 11 4.080 245M 3.60 09 5.030 199H 4.50 07 6.190 162L76.10 3.20 10 5.710 175M 3.60 09 6.420 156H 4.50 07 7.930 126L88.90 3.20 10 6.720 149M 4.00 08 8.360 120H 4.80 06 9.990 101L114.30 3.60 09 9.750 102M 4.50 07 12.200 82H 5.40 05 14.500 70L127.00 4.50 07 13.600 74M 4.80 06 14.500 69H 5.40 05 16.200 62L139.70 4.50 07 15.00 66.5M 4.80 06 15.900 63H 5.40 05 17.900 56L152.40 4.50 07 16.400 61M 4.80 06 17.500 57H 5.40 05 19.600 5 1L165.10 4.50 07 17.800 56M 4.80 05 18.900 53H 5.40 05 21.300 47L168.30 4.50 07 18.200 55M 4.80 06 19.400 51.5
H1 5.40 05 21.700 46H2 6.30 03 25.200 40
L193.70 4.80 06 22.400 45M 5.40 05 25.100 40H 5.90 04 27.300 37L219.10 4.80 06 25.400 39M 5.60 05 29.500 34H 5.90 04 31.000 32
15
20
25
32
40
50
65
80
100
110
125
135
150
150
175
200
Chemical Properties
C 0.12% Max
Mn 0.60% Max
P 0.04% Max
S 0.04% Max
Si 0.08% Max
Physical Properties
Grade YS TS % age
Mpa Mpa Elong.
YST-210 210 330 20
YST-240 240 410 17
Note: For tubes upto size 25mm NB including Elongation of 12% shall be permissible.
Weight
Single tubes (light series) +10%
Single tubes +/- 10%
(medium & heavy series)
Weight Truck LoadFor lot of 10 Ton Min.
Light Series +/- 5%
medium & heavy series +/- 7.5%
ToleranceOutside diameter:
upto and including 48.3mm + 0.4mm
Over 48.3mm +/- 1%
Thickness
+ Not Limited - 10%
-8%
- 0.8mm
(Min.) (Min.) (Min.)
INCH
(1/2”)
(3/4”)
(1”)
1(1 /4”)
1(1 /2”)
(2”)
1(2 /2”)
(3”)
(4”)
(5”)
(6”)
(8”)
(6”)
(7”)
0
CLASS MM
Nominal
Size NB
Conforming to IS : 3589 - 2001
Nominal N.B. Size
OutsideDiameter Wall Thickness
MM Kg/m Mtr/Tonne
150 (6”) 168.30 2.60 10.60 94.30168.30 3.20 12.00 83.30168.30 4.00 16.21 61.70168.30 5.00 20.14 49.66168.30 6.00 24.01 41.64168.30 7.00 27.84 35.91
175 (7”) 193.70 4.00 18.71 53.44193.70 5.00 23.27 42.97193.70 6.00 27.77 36.01193.70 7.00 32.23 31.03
200 (8”) 219.10 2.60 13.88 72.00219.10 3.60 19.13 52.27219.10 4.00 21.22 47.13219.10 5.00 26.40 37.88219.10 5.40 28.46 35.14219.10 6.00 31.53 31.72219.10 7.00 36.61 27.31
Calculated Weight
SPECIFICATIONS OF STEEL TUBES FOR WATER AND SEWAGE
Outside Diameter: +/- 0.75% of ODThickness: +/- 10% Ovality: Shall not exceed 1% of the specified diameterBead Height: The maximum height of the weld bead on the internal surface of the
pipes shall not exceed 60% of nominal wall thicknessStraightness: Shall not deviate from the straightness by more than 0.2% of total lengthLength: Single random length of 4 to 7 meter
Weight: +/- 7.5% on Truck Load
Grade Yield Stress Tensile Strength %elongationMpa(Min) Mpa(Min) (Min)
Fe-330 195 330 20Fe-410 235 410 18Fe-450 275 450 15
: The sizes which are not covered in the Table can also be supplied as per customer requirement (Clause – 11.1)
TOLERANCES
PHYSICAL PROPERTIES
MM MMINCH
Conforming to IS : 4270 - 2001 PLAIN END CASING PIPES
N.B. Size Outside Diameter Wall Thicknessmm mm mm Kg/m Mtr/Ton
100 114.30 5.00 13.48 74
125 141.30 5.00 16.80 59
150 168.30 5.00 20.13 50168.3 5.4 21.60 46
7.1 28.20 35.5
175 193.70 5.40 25.10 40193.7 6.4 29.60 34
8.0 36.60 27
200 219.10 5.40 28.46 35219.1 6.4 33.60 30
8.0 41.60 24
TOLERANCES
PHYSICAL PROPERTIES
Outside diameter of pipe: +/- 1.0%
Grade Y.S. (Min.) T.S.(Min.) %age Min.Mpa Mpa Elongation on
Thickness: + 15%
(N/mm2) (N/mm2) 5.65/So=GI
Up to 406.4mm OD - 12.5%
Fe 410 235 410 15%
Weight: + 10%Single Tube - 8%
Length: 4 to 7 mtrsunless otherwise specified
* Higher wall thickness than specified may be supplied as per requirement of the customer
Nominal Weight
ERW STEEL TUBES FOR WATER WELLS
TOLERANCES
STEEL TUBES FOR IDLERS FOR BELT CONVEYORS
Conforming to IS : 9295 - 1983
Outside Diameter Thickness Weightmm mm Kg / Mtr. Mtr. / Ton
63.50 3.65 5.39 185.5363.50 4.50 6.55 152.6776.10 3.65 6.52 153.3776.10 4.50 7.95 125.7888.90 4.05 8.47 118.0688.90 4.85 10.05 99.4888.90 6.30 12.83 77.93
101.60 4.05 9.74 102.64101.60 4.85 11.57 86.42101.60 6.30 14.81 67.52114.30 4.50 12.19 82.00114.30 5.40 14.50 68.96114.30 6.30 16.78 59.60139.70 4.50 15.00 66.65139.70 4.85 16.13 62.00139.70 5.40 17.89 55.90139.70 6.30 20.73 48.25165.10 4.50 17.80 56.18165.10 4.85 19.17 52.18165.10 5.40 21.27 47.02165.10 6.30 24.67 40.53219.10 5.40 28.50 35.09219.10 6.30 33.06 30.26219.10 7.10 37.12 26.95
Outside Diameter: +/- 0.8%
Thickness: +/- 10%
WeightSingle Tube: +/- 10%For quantities per loadOf 10 Ton Min.: +/- 7.5%
OvalityBelow 168.3mm OD: (0.5MM)168.3mm OD & above: (1.0MM)
Eccentricity 5% of wall thickness
Grade Y.S. (Min.) T.S.(Min.) %age Mpa Mpa Elongation
ERW-210 210 330 20ERW-240 240 410 18ERW-310 310 450 15
PHYSICAL PROPERTIES
CARBON STEEL TUBES FOR MECHANICAL & GENERAL ENGINEERING
Conforming to IS: 3601 - 2006
Outside
Diameter Thickness Mass
Area of
cross
Section
Moment of
Inertia
Modules of
Sections
Radius of
Gyration
mm mm Kg/m cm 4 cm4 cm3 cm
1.80 0.866 1.10 0.53 0.50 0.692.00 0.952 1.21 0.57 0.54 0.692.60 1.20 1.53 0.68 0.64 0.673.20 1.43 1.82 0.77 0.72 0.651.80 1.11 1.42 1.12 0.83 0.892.00 1.23 1.56 1.22 0.91 0.882.30 1.40 1.78 1.36 1.01 0.872.60 1.56 1.98 1.48 1.10 0.863.20 1.87 2.38 1.70 1.27 0.852.00 1.56 1.99 2.51 1.49 1.122.30 1.78 2.27 2.81 1.67 1.112.60 1.99 2.54 3.09 1.84 1.103.20 2.41 3.07 3.60 2.14 1.084.00 2.93 3.73 4.19 2.49 1.062.30 2.27 2.90 5.85 2.76 1.422.60 2.55 3.25 6.46 3.05 1.413.20 3.09 3.94 7.62 3.59 1.393.60 3.44 4.39 8.33 3.93 1.384.00 3.79 4.83 8.90 4.24 1.362.30 2.61 3.32 8.80 3.64 1.632.60 2.93 3.73 9.77 4.05 1.622.90 3.25 4.14 10.70 4.43 1.613.20 3.56 4.53 11.59 4.80 1.603.60 3.97 5.05 12.69 5.25 1.594.00 4.37 5.57 13.77 5.70 1.572.30 3.29 4.19 17.65 5.85 2.052.60 3.70 4.71 19.64 6.51 2.042.90 4.11 5.23 21.59 7.16 2.033.20 4.51 5.74 23.47 7.78 2.023.60 5.03 6.41 25.87 8.58 2.014.00 5.55 7.07 28.15 9.34 2.004.50 6.19 7.89 30.90 10.20 1.982.60 5.24 6.00 40.57 10.66 2.602.90 5.75 6.67 44.74 11.76 2.593.20 6.44 7.33 48.78 12.80 2.583.60 7.11 8.20 54.01 14.20 2.574.50 7.95 10.10 65.12 17.10 2.545.00 8.77 11.16 70.87 18.63 2.522.90 6.15 7.83 72.47 16.30 3.043.20 6.76 8.62 79.21 17.80 3.034.00 8.38 10.70 96.34 21.70 3.005.00 10.30 13.20 116.40 26.20 2.975.40 11.10 14.00 123.80 27.80 2.975.60 11.50 14.65 127.64 28.72 2.95
76.10
88.90
21.30
26.90
33.70
42.40
48.30
60.30
3.60 8.70 11.10 133.20 26.20 3.474.00 9.63 12.30 146.20 28.80 3.455.00 11.90 15.20 177.50 34.90 3.42
101.60
Outside
Diameter Thickness Mass
Area of
cross
Section
Moment of
Inertia
Modules of
Sections
Radius of
Gyration
mm mm Kg/m cm4 cm4 cm3 cm
3.60 9.83 12.50 192.00 33.60 3.924.50 12.20 15.50 234.30 41.00 3.895.40 14.50 18.50 274.50 48.00 3.866.30 16.80 21.20 315.00 55.10 3.833.60 12.10 15.38 356.36 51.02 4.814.00 13.40 17.04 392.57 56.20 4.804.50 15.00 19.10 437.20 62.60 4.785.00 16.60 21.20 480.50 68.80 4.775.40 17.90 22.80 514.50 73.70 4.756.30 20.70 26.30 591.00 84.70 4.734.50 16.40 20.90 572.20 75.10 5.235.00 18.20 23.20 629.50 82.60 5.215.40 19.60 24.90 674.50 88.50 5.204.50 17.80 22.70 732.60 88.70 5.685.00 19.70 25.10 806.60 97.70 5.665.40 21.20 27.10 864.70 105.00 5.656.30 24.80 31.40 992.00 120.00 5.634.00 16.20 20.64 696.87 82.81 5.814.50 18.20 23.20 777.20 98.40 5.795.00 20.10 25.70 855.80 102.00 5.785.40 21.70 27.60 917.70 109.00 5.766.30 25.20 32.10 1053.00 125.00 5.737.10 28.20 35.94 1169.66 139.00 5.708.00 31.60 39.70 1288.00 153.00 5.695.00 23.30 29.60 1320.00 136.00 6.675.40 25.10 31.90 1417.00 146.00 6.665.90 27.30 34.80 1536.00 159.00 6.646.30 29.10 37.00 1600.00 165.00 6.608.00 36.60 46.30 2004.00 207.00 6.574.50 23.80 30.32 1746.18 159.40 7.595.00 26.40 33.60 1928.00 176.00 7.575.60 29.50 37.60 2142.00 195.00 7.566.30 33.10 42.00 2404.00 219.00 7.548.00 41.60 52.00 1940.00 268.00 7.52
Grade Y.S.(Min.) T.S.(Min)
(Mpa) (Mpa)As Welded (less
than or equal to
33.7 mm OD)
As Welded
(more than or
equal to 33.7
mm OD)
WT160 160 310 15 22WT210 210 330 12 20WT240 240 410 10 15
TOLERANCE
± 0.15 mm
± 0.18 mm
± 0.25 mm± 0.31 mm± 0.36 mm± 0.43 mm± 0.58 mm± 0.65 mmAbove 152.40 to 168.30 mm
Outside Diameter upto & including 51 mmOver 51 mm to 76.10 mmAbove 76.10 to 88.90 mmAbove 88.90 to 101.60 mmAbove 101.60 to 114.3mmAbove 114.30 to 152.40 mm
165.10
168.30
193.70
219.10
% age Elongation
(Min.)
Outside Diameter upto 25.40 mm
114.30
139.70
152.40
Note: 1) Any OD & Thickness not covered in this table may be supplied as per customer requirement (Clause No. -10)
2) The Tolerance of thickness excluding the weld shall be ± 10 %
3.20 8.77 11.16 172.33 30.15 3.93
PHYSICAL PROPERTIES
Above 168.30 ± 0.75 mm
BHUSHAN POWER & STEEL LTD. CHENNAI
NO. 190(OLD 758) UNIT-F 3RD FLOOR MOUNT
CHAMBERS, MOUNT ROAD ANNASALAI, CHENNAI -2
TEL NO.: +91-44- 28551820, 42011130
FAX: +91-44- 28591130
MOB: +91-9790880356
BHUSHAN POWER & STEEL LTD. AHMEDABAD
B-207, GANESH PLAZA BUILDING, OPP.
NAVRANGPURA, BUS STAND, NEAR SWASTIK CHAR
RASTA, NAVRANGPURA,
AHMEDABAD – 380009 GJ
TEL NO. +91-79-30020857
FAX: +91-79- 30020857
MOB: +91-8128227777
EMAIL: bhushanpowersteel_ahmedavad@yahoo.co.in
BHUSHAN POWER & STEEL LTD. SECUNDERABAD
MITTAL CHAMBERS, R. NO. 315 (3RD FLOOR),
2-2-51, M.G. ROAD, SECUNDERABAD – 500003 A.P.
TEL NO. : +91-40-66901464
MOB: +91-9989407070
EMAIL:vamshibpsl@gmail.com
BHUSHAN POWER & STEEL LTD. JAMMU
NEAR SHIV MANDIR, NATIONAL HIGHWAY, GANGAYAL,
JAMMU- J&K
TEL NO.: 0191-2482082
FAX: +91-191-2430531
MOB: +91-9419143631
EMAIL: rjkmrsahoo@yahoo.com
BHUSHAN POWER & STEEL LTD. KOLKATTA
J.K. MILLENNIUM CENTRE, 6TH FLOOR,
46 D, J.L. ROAD, KOLKATTA-700071
TEL NO: +91-33-30512299
FAX: +91-33- 30512235
MOB: +91-9831878738, 9831826344
BHUSHAN POWER & STEEL LTD. BANGALORE
NO.937, FIRST FLOOR, 16 TH MAIN, 2ND STAGE,
B.T.M. LAYOUT, BANGALORE -76
TEL NO: +91-80-26689037
FAX: +91-80 – 26689037
MOB: +91-7259006779
BHUSHAN POWER & STEEL LTD. MUMBAI
821, 2ND FLOOR, BUILDING NO. 8, SOLITAIRE
CORPORATE PARK, NEW LINF ROAD, ANDHERI (E),
MUMBAI- 400099
TELNO.: +91-22-30149000
MOB: +91-9987574041
EMAIL: bpsl_mum@rediffmail.com
BHUSHAN POWER & STEEL LTD. GHAZIABAD
PLOT NO. 9, SOUTH SIDE OF G.T. ROAD,
INDUSTRIAL AREA, GHAZIABAD – U.P.
TEL NO.: +91-120- 4560800
MOB: +91-9873002167
FAX: +91-120- 2867754
EMAIL: yabpsl@gmail.com
BHUSHAN POWER & STEEL LTD. KANPUR
PLOT NO. 40, 84/20, INDUSTRIAL AREA,
FAZALGANJ, KANPUR – U.P.
TEL NO. +91-512 – 2225085
MOB: +91-9873002167
EMAIL: yabpsl@gmail.com
REGISTERED & CORPORATE OFFICE: NEW
DELHI
BHUSHAN POWER & STEEL LTD.
4TH FLOOR, TOLSTOY HOUSE,
15-17, TOLSTOY MARG, CONNAUGHT PLACE, NEW
DELHI
TEL NO. +91-11-30451000
MOB: +91-9811798170 , 9873002167
FAX: +91-11- 23712737, 41522168
CORRESPONDANCE ADDRESS: CHANDIGARH
BHUSHAN POWER & STEEL LTD.
PLOT NO. 3, INDUSTRIAL AREA, PHASE-1,
CHANDIGARH-160002
TEL NO. : +91-172-3911715-18
FAX: +91-172-3911704
MOB: +91-9779455528, 9779455527
EMAIL: vineet2173@gmail.com
BHUSHAN POWER & STEEL LTD.
(PIPE & TUBE DIVISION) CHANDIGARH
PLOT NO.83, INDUSTRIAL AREA, PHASE-1,
CHANDIGARH-160002
TEL NO. 0172 3911869, 3911877, 3911863, 3911852
FAX: +91-172-3911876
MOB: +91-9779455602, 9779455604-605
EMAIL: coord83@bpsl.net, mktg83@bpsl.net,
bhushan83@bpsl.net
MANUFACTURING PLANTS:
BHUSHAN POWER & STEEL LTD.
(BLACK PIPE/G.I./GP) DERABASSI
CHANDIGARH AMBALA ROAD, DERABASSI – 140507,
DISTT. PATIALA, PUNJAB
TEL NO: +91-1762- 307900, 307901
FAX: +91-1762- 307902
EMAIL: bhushandrb@bpsl.net, vineet2173@gmail.com
BHUSHAN POWER & STEEL LTD. ORISSA
VILL. THELKOLOI, P.O. LAPANGA
TEHSIL – RENGOLI, DISTT. SAMBALPUR – 768232
ORISSA
TEL NO.: +91-663-2535000, 2562026-32
MOB. : +91-7735429297
FAX: +91-663- 2562007, 2562011
EMAIL: orissa@bpsl.net, vineet2173@gmail.com
BHUSHAN POWER & STEEL LTD. KOLKATTA
NH – 2 DELHI ROAD, VILL. BANGIHATTI, MALLICKPARA
(HOOGLY) SERAMPORE – KOLKATTA (WEST BENGAL)
TEL NO. : +91-33-26003000
MOB: +91-9831826344, 9007545566
FAX: +91-33-26226523.
EMAIL: kolkatta@bpsl.net
BHUSHAN POWER & STEEL LTD. HOSKOTE
55, KIADB INDUSTRIAL AREA,CHINTAMANI ROAD,
HOSKOTE TALUK, BANGALORE-562114
TEL NO. +91-80- 27971030
MOB: +91-9008477112, 9003934283
EMAIL: anilbhushan_2002@yahoo.com
AARTI STRIPS PRIVATE LTD. NEPAL
WARD NO 1, TANKI SINWARI, VDC MORANG, BIRAT
NAGAR, NEPAL
TEL NO. 00977-21421261 - 67
MOBILE NO.: 00977-9852024277, 09831826344
DERABASSI
OTHER BRANCHES : l BADDI : +91-9816675252 l KALA AMB : +91-9805096166 l BHIWADI : +91-9001893577 l COCHIN : +91-8089300789
l COIMBATORE : +91-9047522240 l JAIPUR : +91-9001895110 l PARWANOO : +91-9816707293 l RAJKOT : +91-9227720718 l VIJAYAWADA : +91-9490435099
WAREHOUSES & BRANCHES:
BHUSHAN POWER & STEEL LTD. AURANGABAD
K- 99, MIDC WALUJ, AURANGABAD
TEL NO. +91-240-2563131
MOB: +91-9766623177
EMAIL: sonivk12@gmail.com
BHUSHAN POWER & STEEL LTD. FARIDABAD
PLOT NO. 264, SECTOR- 24, FARIDABAD
TEL NO. +91-129 – 4041360, 4080256
FAX: +91-129 – 4080251
MOB: +91- 9711130833, 9811798179, 7838049397
BHUSHAN POWER & STEEL LTD. HOSUR
65, SIPCOT INDUSTRIAL COMPLEX, ZUZUWADI,
HOSUR.
TEL NO.: +91-4344-274619, 274620
FAX: +91-4344- 274620
MOB: +91-9003934283
EMAIL: sprabhakar@bpsl.net
BHUSHAN POWER & STEEL LTD. LUDHIANA
B-29/542, OPP. DHANDHARI KALAN RAILWAY STATION,
G.T. ROAD, LUDHIANA – PB.
TEL NO. : +91161- 2511690
FAX+91-161 – 2511687, 2511689
MOB: +91-9779455630, 9779455631
EMAIL: bil_ldh@yahoo.com
BHUSHAN POWER & STEEL LTD. MANESAR
PLOT NO. 1A, SECTOR 6, IMT – MANESAR,
DISTT. GURGAON – HR
TEL NO. : _91-124- 4367909,4367782
FAX: +91-124- 4367908
MOB: +91-9811999308,09873002172
EMAIL: bpslimt@rediffmail.com
BHUSHAN POWER & STEEL LTD. PUNE
GAT NO. 119, VILLAGE CHIMBALI, NASIK – PUNE
HIGHWAY, CHAKAN, PUNE – MH.
TEL NO. +91-2135 – 261406, FAX : +91-2135 – 261406
MOB: +91-9766623171, 9766623170
EMAIL: kishorbvohra@yahoo.co.in
BHUSHAN POWER & STEEL LTD. HARIDWAR
KHASRA NO. 727(A), SALIMPUR MAHDOOD, OPPOSITE
CAVIN CARE SECTOR – 4, SIDCUL, HARIDWAR- UA
MOB: +91-8859900072
EMAIL: naveenchandana@rediffmail.com
BHUSHAN POWER & STEEL LTD. PANTNAGAR
PLOT NO. 48 – 57, SECTOR NO. 3, IIE, SIDCUL,
PANTNAGAR – DISTT.
UDHAM SINGH NAGAR - UA
TEL NO. : +91-5944-250848,250847
MOB: +91-9759622100
EMAIL: rudrapur@bpsl.net
BHUSHAN POWER & STEEL LTD. NASHIK
PLOT NO. E - 22, MIDC, MALEGAON SINNAR
NASHIK- MH
MOB: +91-9766623176
EMAIL: bpsl_nasik@yahoo.com
BHUSHAN POWER & STEEL LTD. INDORE
PLOT NO. 378/2/8, GRAM PALDA, PATWARI HALKA
NO.26, INDORE – M.P.
MOB: +91-9755559112
EMAIL: lahukolhe@bpsl.net
top related