pipe fittings is 8008

Pipe Fittings - Bend (Butt & Socket Weld)

Available M.O.C.:

PP (POLYPROPYLENE) HDPE (HIGH DENSITY POLYETHYLENE)

BUTT WELD - ALL DIMENSIONS ARE IN MM ------------------------------ (± 2MM)

SizeC D D1 D2 L

IN. MM

1/2" 20 35.5 21.0 14.0 23.0 3.0

3/4" 25 40.0 25.0 19.0 28.0 4.0

1" 25 40.0 25.0 19.0 28.0 4.0

1.1/4" 40 60.0 40.0 29.0 43.0 6.0

1.1/2" 50 71.0 50.0 37.0 54.0 8.0

2" 63 80.0 63.0 47.5 65.0 10.0

21.2" 75 90.0 75.0 59.0 78.0 12.0

3" 90 109.0 90.0 73.0 95.0 14.0

4" 110 135.0 108.5 88.0 114.0 15.0

6" 160 220.0 158.5 133.5 169.0 16.0

As per is : 8008 - 1976 (Part II)Max Working Pressure 10kg/cm2

Pipe Fittings - Tee (Butt & Socket Weld)

Available M.O.C.:

PP (POLYPROPYLENE)

HDPE (HIGH DENSITY POLYETHYLENE)

BUTT WELD - ALL DIMENSIONS ARE IN MM ------------------------------ (± 2MM)

SizeD D1 D2 H L L

IN. MM

1/2" 20 20.5 14.5 24.0 25.0 50.0 3.0

3/4" 25 26.0 19.5 28.5 31.0 61.5 4.0

1" 32 32.5 25.0 36.0 37.0 75.5 5.0

1.1/4" 40 40.5 31.0 43.5 44.5 90.0 6.0

1.1/2" 50 49.5 38.0 53.0 47.5 98.0 8.0

2" 63 62.5 49.0 66.0 57.0 115.5 10.0

2.1/2" 75 73.0 59.5 79.0 80.0 164.5 12.0

3" 90 91.0 75.0 95.5 95.0 194.0 14.0

4" 110 109.0 89.0 114.0 118.5 238.0 15.0

6" 160 160.0 135.0 168.0 171.0 345.0 16.0

As per is : 8008 - 1976 (Part II)Max Working Pressure 10kg/cm2

Pipe Fittings - Long Neck Pipe End

Available M.O.C.:

PP (POLYPROPYLENE) HDPE (HIGH DENSITY POLYETHYLENE)

BUTT WELD - ALL DIMENSIONS ARE IN MM ------------------------------ (± 2MM)

SizeD D1 D2 D3 T T1

IN. MM

1/2" 20 52.0 14.0 21.0 25.5 37.0 10.0

3/4" 25 61.0 18.0 25.5 29.0 37.5 11.0

1" 32 65.5 23.5 32.5 36.0 51.0 12.0

1.1/4" 40 71.0 27.0 40.0 44.0 50.0 12.0

1.1/2" 50 75.0 39.0 50.0 53.0 48.5 11.5

2" 63 95.0 47.5 63.0 66.0 50.0 12.5

2.1/2" 75 105.0 56.0 75.5 78.5 49.0 14.0

3" 90 112.0 68.5 90.0 94.0 78.5 18.0

4" 110 155.0 84.0 110.0 116.0 79.5 20.0

5" 125 188.0 97.5 126.0 132.0 78.0 19.0

5.1/4" 140 195.0 113.0 140.5 147.0 78.0 22.5

6" 160 211.0 128.0 160.0 165.0 80.0 25.0

7" 180 228.0 148.0 181.0 184.5 81.0 28.0

8" 200 241.0 167.0 200.0 207.0 79.0 23.0

9" 225 273.5 191.0 225.0 231.5 79.0 32.5

10" 250 294.0 209.0 248.5 250.0 79.5 31.0

11" 280 325.0 216.0 280.0 285.0 94.5 31.0

12" 315 373.0 255.0 314.5 317.0 94.5 31.0

As per is : 8008 - 1976 (Part VI)Max Working Pressure 10kg/cm2

Pipe Fittings - Short Neck Pipe End

Available M.O.C.:

PP (POLYPROPYLENE) HDPE (HIGH DENSITY POLYETHYLENE)

BUTT WELD - ALL DIMENSIONS ARE IN MM ------------------------------ (± 2MM)

SizeD D1 D2 D3 T T1

IN. MM

1/2" 20 50.0 15.0 20.0 24.0 18.5 8.0

3/4" 25 58.0 20.0 25.0 29.0 18.5 9.5

1" 32 65 23.0 32.0 34.0 21.0 10.0

1.1/4" 40 73.0 31.0 40.0 44.0 21.5 10.0

1.1/2" 50 80.0 39.0 50.0 54.0 22.0 11.0

2" 63 95.0 50.0 63.0 67.0 21.5 11.5

2.1/2" 75 105.0 57.5 75.0 80.0 25.0 11.5

3" 90 122.5 68.0 90.0 95.5 27.0 14.0

4" 110 151.5 84.5 108.0 113.0 30.0 14.0

5" 125 182.0 92.0 123.0 130.0 32.0 16.5

5.1/4" 140 187.0 114.0 140.0 145.0 36.5 15.5

6" 160 217.0 125.0 160.0 166.0 35.0 20.0

7" 180 242.0 139.0 180.0 185.0 34.0 18.0

8" 200 239.0 155.5 200.0 204.5 43.0 24.0

9" 225 275.0 177.5 225.0 227.0 47.0 28.0

10" 250 300.0 196.0 250.0 244.0 42.0 25.5

11" 280 324.0 218.0 279.0 285.0 41.5 26.0

12" 315 380.0 243.5 315.0 320.0 50.0 30.0

As per is : 8008 - 1976 (Part VI)Max Working Pressure 10kg/cm2

Pipe Fittings - Slipon Flange

Available M.O.C.:

PP (POLYPROPYLENE) HDPE (HIGH DENSITY POLYETHYLENE)

* Flange Drilled

ANSI B 16.5 (150 Class)

BUTT WELD - ALL DIMENSIONS ARE IN MM ------------------------------ (± 2MM)

SizeD D1 T

IN. MM

1/2" 20 95.0 25.5 16.0

3/4" 25 101.0 32.0 17.5

1" 32 122.5 37.0 18.5

1.1/4" 40 134.0 47.0 19.0

1.1/2" 50 140.0 57.0 21.0

2" 63 164.0 70.0 21.0

2.1/2" 75 184.0 83.0 21.0

3" 90 202.5 97.5 22.0

4" 110 228.0 118.0 22.5

5" 125 266.0 133.0 23.0

5.1/4" 140 263.0 145.0 24.5

6" 160 298.5 167.0 25.5

7" 180 329.0 188.0 27.0

8" 200 375.0 207.5 30.0

9" 225 398.0 233.0 32.5

10" 250 427.0 257.0 30.5

11" 280 451.0 287.0 32.0

12" 315 489.0 325.0 29.0

As per is : 8008 - 1976 (Part VI)Max Working Pressure 10kg/cm2

Pipe Fittings - Blind Flange

Available M.O.C.:

PP (POLYPROPYLENE) HDPE (HIGH DENSITY POLYETHYLENE)

* Flange Drilled

ANSI B 16.5 (150 Class)

Pipe Bore Flanges & Threaded Flanges are also available

BUTT WELD - ALL DIMENSIONS ARE IN MM ------------------------------ (± 2MM)

SizeD D1 T

IN. MM

1/2" 20 95.0 25.5 16.0

3/4" 25 101.0 32.0 17.5

1" 32 122.5 37.0 18.5

1.1/4" 40 134.0 47.0 19.0

1.1/2" 50 140.0 57.0 21.0

2" 63 164.0 70.0 21.0

2.1/2" 75 184.0 83.0 21.0

3" 90 202.5 97.5 22.0

4" 110 228.0 118.0 22.5

5" 125 266.0 133.0 23.0

5.1/4" 140 263.0 145.0 24.5

6" 160 298.5 167.0 25.5

7" 180 329.0 188.0 27.0

8" 200 375.0 207.5 30.0

9" 225 398.0 233.0 32.5

10" 250 427.0 257.0 30.5

11" 280 451.0 287.0 32.0

12" 315 489.0 325.0 29.0

As per is : 8008 - 1976 (Part VI)Max Working Pressure 10kg/cm2

Pipe Fittings - Reducer

Available M.O.C.:

PP (POLYPROPYLENE) HDPE (HIGH DENSITY POLYETHYLENE) ISOTACTIC PP PVDF (POLYVINYLIDENE FLUORIDE)

BUTT WELD - ALL DIMENSIONS ARE IN MM ------------------------------ (± 2MM)

SizeD D1 D2 D3 T

IN. MM

1 x 1/2 32 x 20 32.0 22.0 14.0 20.0 48.0

1 x 3/4 32 x 25 32.0 22.0 17.0 25.0 50.0

1.1/4 x 1/2

40 x 20 40.0 28.0 15.0 20.0 51.0

1.1/4 x 3/4

40 x 25 40.0 28.0 14.0 25.0 53.0

1.1/4 x 1 40 x 32 40.0 28.0 22.5 32.0 55.0

1.1/2 x 1/2

50 x 20 50.0 34.0 12.5 20.0 55.5

1.1/2 x 50 x 25 50.0 40.0 20.0 25.0 57.0

3/4

1.1/2 x 1 50 x 32 50.0 34.0 20.0 32.0 55.0

1.1/2 x 1.1/4

50 x 40 50.0 34.0 30.0 40.0 57.0

2 x 1 63 x 32 63.0 45.0 21.0 32.0 76.0

2 x 1.1/4 63 x 40 63.0 45.0 28.0 40.0 85.0

2 x 1.1/2 63 x 50 63.0 44.5 32.0 50.0 74.0

2.1/2 x 1 75 x 32 75.0 55.0 20.0 32.0 82.0

2.1/2 x 1.1/4

75 x 40 75.0 54.0 27.0 40.0 60.0

2.1/2 x 1.1/2

75 x 50 75.0 55.0 36.0 50.0 76.0

2.1/2 x 2 75 x 63 75.0 55.0 45.0 63.0 84.0

3 x 1 90 x 32 90.0 70.0 25.0 32.0 78.0

3 x 1.1/4 90 x 40 90.0 67.5 29.0 40.0 80.0

3 x 1.1/2 90 x 50 90.0 65.0 39.0 50.0 80.0

3 x 2 90 x 63 90.0 63.0 49.0 63.0 76.0

3 x 2.1/2 90 x 75 90.0 69.0 57.0 75.0 71.0

4 x 1 110 x

32110.0 82.0 23.0 32.0 93.0

4 x 1.1/4 110 x

40 110.0 82.0 29.0 40.0 94.5

4 x 1.1/2 110 x

50 110.0 82.0 34.0 50.0 91.0

4 x 2110 x

63 110.0 82.0 47.0 63.0 95.0

4 x 2.1/2 110 x

75 110.0 82.0 52.0 75.0 92.5

4 x 3110 x

90 110.0 82.0 78.0 91.0 95.0

6 x 2160 x

63 160.0 130.0 44.0 63.0 133.0

6 x 2.1/2 160 x

75 160.0 131.0 56.0 75.0 128.0

6 x 3160 x

90 160.0 131.0 69.0 90.0 127.0

6 x 4160 x 110

160.0 131.0 85.0 110.0 132.0

8 x 2200 x

63 200.0 163.0 49.0 63.0 198.0

8 x 3200 x

90 200.0 163.0 71.0 90.0 197.0

8 x 4200 x 110

200.0 163.0 85.0 110.0 197.0

8 x 6 200 x 160

200.0 163.0 122.0 160.0 198.0

8 x 7 200 x 180

200.0 163.0 139.0 180.0 197.0

9 x 2 225 x

63 225.0 182.0 49.0 63.0 197.0

9 x 3 225 x

90 225.0 182.0 70.0 90.0 196.0

9 x 4 225 x 110

225.0 182.0 85.0 110.0 197.0

9 x 6 225 x 160

225.0 182.0 124.0 160.0 196.0

9 x 8 225 x 200

225.0 182.0 158.0 200.0 197.0

10 x 2 250 x

63 250.0 200.0 49.0 63.0 196.0

10 x 3 250 x

90 250.0 203.0 71.0 90.0 196.0

10 x 4 250 x 110

250.0 200.0 85.0 110.0 196.0

10 x 6 250 x 160

250. 201.0 124.0 160.0 196.0

10 x 8 250 x 250.0 201.0 153.0 200.0 196.0

200

12 x 4 315 x 110

315.0 254.0 84.0 110.0 212.0

12 x 6 315 x 160

315.0 257.0 123.0 160.0 212.0

12 x 8 315 x 200

315.0 255.0 158.0 200.0 212.0

12 x 10 315 x 250

315.0 257.0 197.0 250.0 212.0

14 x 12           212.0

As per is : 8008 - 1976 (Part V)Max Working Pressure 10kg/cm2

Pipe Fittings - Hose Nipple - Flange End

Available M.O.C.:

PP (POLYPROPYLENE) HDPE (HIGH DENSITY POLYETHYLENE) ISOTACTIC PP PVDF (POLYVINYLIDENE FLUORIDE)

BUTT WELD - ALL DIMENSIONS ARE IN MM ------------------------------ (± 2MM)

SizeD D1 D2 T T1 T2

IN. MM

1 x 3/4 32 x 25 129.0 13.5 21.5 126.0 19.0 44.0

1 x 1 32 x 32 130.0 19.0 27.0 125.0 21.0 51.0

1.1/2 x 1 50 x 32 140.0 19.0 26.0 135.0 20.0 50.0

1.1/2 x 1.1/4

50 x 40 140.0 22.0 33.0 135.0 21.0 55.0

1.1/2 x 1.1/2

50 x 50 140.0 17.5 40.0 135.0 18.0 50.0

2 x 1 63 x 32 162.0 17.5 26.0 127.0 22.0 50.0

2 x 1.1/4 63 x 40 162.0 22.0 34.0 120.0 22.0 60.0

2 x 1.1/2 63 x 50 162.0 27.0 40.0 120.0 22.0 60.0

2 x 2 63 x 63 162.0 35.5 51.5 120.0 22.0 57.0

3 x 1.1/2 90 x 50 198.0 27.0 39.0 148.0 25.0 55.0

3 x 2 90 x 63 198.0 34.0 50.0 134.0 25.0 55.0

3 x 3 90 x 90 198.0 53.0 75.0 138.0 25.0 55.0

4 x 2 110 x

63 226.0 35.0 51.0 140.0 25.0 50.0

4 x 3 110 x

90 226.0 60.0 76.0 140.0 25.0 50.0

4 x 4 110 x 100

226.0 81.5 101.0 140.0 25.0 50.0

As per is Manufacture Standard

Pipe Fittings - End Cap - Flange End

Available M.O.C.:

PP (POLYPROPYLENE) HDPE (HIGH DENSITY POLYETHYLENE)

* Flange Drilled

ANSI B 16.5 (150 Class)

BUTT WELD - ALL DIMENSIONS ARE IN MM ------------------------------ (± 2MM)

SizeD D1 T T1

IN. MM

1/2" 20 20.0 12.0 12.0 8.0

3/4" 25 25.0 12.0 12.0 8.0

1" 32 32.0 24.5 13.0 8.0

1.1/4" 40 40.0 30.0 16.0 8.0

1.1/2" 50 50.0 38.0 16.5 9.0

2" 63 63.0 47.0 17.0 9.5

2.1/2" 75 75.0 57.0 18.0 10.0

3" 90 90.0 70.0 18.0 10.0

4" 110 110.0 100.0 19.30 10.0

5" 125 125.0 111.0 22.5 12.0

5.1/4" 140 14.0 111.0 24.0 12.0

6" 160 160.0 130.0 27.5 15.0

As per is : 8008 - 1976 (Part VII)Max Working Pressure 10kg/cm2