powerlite s6 series/powerlite 78/powerlite w6 ... - epson · quick setup before using the ... 5...
Post on 27-Jun-2018
222 Views
Preview:
TRANSCRIPT
Quick SetupBefore using the projector, read these instructions and the safety instructions in the User’s Guide on your projector CD-ROM.
4 Set up the remote control 1 Removethebatterycover.
2 Insertthebatteries.
3 Replacethebatterycover.
5 Connect your video source Followtheseinstructionstoconnecttheprojectortoyourcomputerusing
theUSBcable(Windows®only),ortoyourvideoequipmentusinganHDMIcable(PowerLiteW6Seriesonly)orcomponentvideocable.Forinstructionsonusingotherconnectionoptions,seetheUser’s GuideonyourCD-ROM.
Connecting with a USB cable Ifyou’reconnectingaWindowsVista®,XP,or2000computertothe
projector,youcanusetheUSBcable.Youdon’tneedtousetheVGAcable.
1 Makesuretheprojectoristurnedon.
2 Turnonyourcomputer.
3 ConnectthesquareendoftheUSBcabletotheprojector’sTypeBUSBport.
4 ConnecttheflatendofthecabletoanyavailableUSBportonyourcomputer.
5 FollowtheinstructionsonyourcomputerscreentoinstalltheEpsonUSBDisplaysoftware(youneedtoinstallthesoftwareonlythefirsttimeyouconnect).Afterthesoftwarehasbeeninstalled,youseeyourcomputer’sscreendisplayedbytheprojector.
NOTE Ifyouseea“DigitalSignatureWarning”whileinstallingthesoftware,selectContinue.
Youcanconnectanoptionalaudiocableifyouwanttoplaysoundthroughtheprojector.SeetheUser’s GuideonyourCD-ROMforinstructions.
3 Plug in and turn on 1 OpentheA/V Muteslide(lenscover).
2 Connectthepowercordtotheprojectorandplugtheotherendintoanelectricaloutlet.
The powerlightontheprojectorturnsorange.
3 Turnonyourcomputerorvideosource.
4 Pressthe powerbuttonontheprojectororremotecontrol.Theprojectorbeeps,the powerlightflashesgreen,andtheprojectorwarmsup.Whenthe powerlightstaysgreen,theprojectorisreadyforuse.
Turning off the projector 1 Ifyou’reusingacomputer,shutitdownfirst,whileyoucanstill seethedisplay.
2 Pressthe powerbuttonontheprojectororremotecontrol.
3 Whenyouseetheconfirmationmessage,pressthe powerbuttonagain.Theprojectorbeepstwiceandthe powerlightturnsorange.
WithEpson’sInstantOff®technology,there’snocool-downperiod.Whenyou’redone,justunplugtheprojectorandit’sreadytotravel.
Turn over
PowerLite® S6 Series/78/ W6 Series
1 Unpack the projector Youshouldhavethefollowingitems:
2 Choose a location Theprojectorsupports4viewingsetups:frontprojection,ceilingprojection,
rearprojection,andrear/ceilingprojection.Choosethebestoneforyourenvironment.Ifyouinstalltheprojectorinarearoroverheadposition,you’llneedtochoosethecorrectprojectionoptionfromtheExtendedmenu.SeetheUser’s GuideonyourCD-ROMforinstructions.
Thedistancebetweentheprojectorandthescreengenerallydeterminesthesizeoftheimage,butthesizecanalsovarydependingontheaspectratio(imageshape),howyouzoomintotheimage,andwhetheryou’veadjustedotherimagesettings.Dependingontheprojectormodelyouareusingandtheimagesettingsyou’vechosen,youcanplacetheprojectoranywherefrom33to412inches(84to1047cm)fromthescreen.
UsethetablesintheUser’s GuideortheImageSizecalculatorontheMultimediaProjectorspageonEpson’swebsitetohelpyoudeterminetheproperprojectiondistance.
PowercordVGAcable
PasswordProtectedsticker
Projectorremotecontrol
(PowerLiteS6Series/78)
Batteries
*411506000**411506000*
Projectorremotecontrol
(PowerLiteW6Series)
USBcable
Powerbutton
PowerLiteS6Series/78
Powerbutton
PowerLiteW6Series
PowerLiteS6Series/78
PowerLiteW6Series
Powerbutton
Powerlight
Projector Carryingcase
User’s GuideCD-ROM
Quick SetupBefore using the projector, read these instructions and the safety instructions in the User’s Guide on your projector CD-ROM.
4 Set up the remote control 1 Removethebatterycover.
2 Insertthebatteries.
3 Replacethebatterycover.
5 Connect your video source Followtheseinstructionstoconnecttheprojectortoyourcomputerusing
theUSBcable(Windows®only),ortoyourvideoequipmentusinganHDMIcable(PowerLiteW6Seriesonly)orcomponentvideocable.Forinstructionsonusingotherconnectionoptions,seetheUser’s GuideonyourCD-ROM.
Connecting with a USB cable Ifyou’reconnectingaWindowsVista®,XP,or2000computertothe
projector,youcanusetheUSBcable.Youdon’tneedtousetheVGAcable.
1 Makesuretheprojectoristurnedon.
2 Turnonyourcomputer.
3 ConnectthesquareendoftheUSBcabletotheprojector’sTypeBUSBport.
4 ConnecttheflatendofthecabletoanyavailableUSBportonyourcomputer.
5 FollowtheinstructionsonyourcomputerscreentoinstalltheEpsonUSBDisplaysoftware(youneedtoinstallthesoftwareonlythefirsttimeyouconnect).Afterthesoftwarehasbeeninstalled,youseeyourcomputer’sscreendisplayedbytheprojector.
NOTE Ifyouseea“DigitalSignatureWarning”whileinstallingthesoftware,selectContinue.
Youcanconnectanoptionalaudiocableifyouwanttoplaysoundthroughtheprojector.SeetheUser’s GuideonyourCD-ROMforinstructions.
3 Plug in and turn on 1 OpentheA/V Muteslide(lenscover).
2 Connectthepowercordtotheprojectorandplugtheotherendintoanelectricaloutlet.
The powerlightontheprojectorturnsorange.
3 Turnonyourcomputerorvideosource.
4 Pressthe powerbuttonontheprojectororremotecontrol.Theprojectorbeeps,the powerlightflashesgreen,andtheprojectorwarmsup.Whenthe powerlightstaysgreen,theprojectorisreadyforuse.
Turning off the projector 1 Ifyou’reusingacomputer,shutitdownfirst,whileyoucanstill seethedisplay.
2 Pressthe powerbuttonontheprojectororremotecontrol.
3 Whenyouseetheconfirmationmessage,pressthe powerbuttonagain.Theprojectorbeepstwiceandthe powerlightturnsorange.
WithEpson’sInstantOff®technology,there’snocool-downperiod.Whenyou’redone,justunplugtheprojectorandit’sreadytotravel.
Turn over
PowerLite® S6 Series/78/ W6 Series
1 Unpack the projector Youshouldhavethefollowingitems:
2 Choose a location Theprojectorsupports4viewingsetups:frontprojection,ceilingprojection,
rearprojection,andrear/ceilingprojection.Choosethebestoneforyourenvironment.Ifyouinstalltheprojectorinarearoroverheadposition,you’llneedtochoosethecorrectprojectionoptionfromtheExtendedmenu.SeetheUser’s GuideonyourCD-ROMforinstructions.
Thedistancebetweentheprojectorandthescreengenerallydeterminesthesizeoftheimage,butthesizecanalsovarydependingontheaspectratio(imageshape),howyouzoomintotheimage,andwhetheryou’veadjustedotherimagesettings.Dependingontheprojectormodelyouareusingandtheimagesettingsyou’vechosen,youcanplacetheprojectoranywherefrom33to412inches(84to1047cm)fromthescreen.
UsethetablesintheUser’s GuideortheImageSizecalculatorontheMultimediaProjectorspageonEpson’swebsitetohelpyoudeterminetheproperprojectiondistance.
PowercordVGAcable
PasswordProtectedsticker
Projectorremotecontrol
(PowerLiteS6Series/78)
Batteries
*411506000**411506000*
Projectorremotecontrol
(PowerLiteW6Series)
USBcable
Powerbutton
PowerLiteS6Series/78
Powerbutton
PowerLiteW6Series
PowerLiteS6Series/78
PowerLiteW6Series
Powerbutton
Powerlight
Projector Carryingcase
User’s GuideCD-ROM
Quick SetupBefore using the projector, read these instructions and the safety instructions in the User’s Guide on your projector CD-ROM.
4 Set up the remote control 1 Removethebatterycover.
2 Insertthebatteries.
3 Replacethebatterycover.
5 Connect your video source Followtheseinstructionstoconnecttheprojectortoyourcomputerusing
theUSBcable(Windows®only),ortoyourvideoequipmentusinganHDMIcable(PowerLiteW6Seriesonly)orcomponentvideocable.Forinstructionsonusingotherconnectionoptions,seetheUser’s GuideonyourCD-ROM.
Connecting with a USB cable Ifyou’reconnectingaWindowsVista®,XP,or2000computertothe
projector,youcanusetheUSBcable.Youdon’tneedtousetheVGAcable.
1 Makesuretheprojectoristurnedon.
2 Turnonyourcomputer.
3 ConnectthesquareendoftheUSBcabletotheprojector’sTypeBUSBport.
4 ConnecttheflatendofthecabletoanyavailableUSBportonyourcomputer.
5 FollowtheinstructionsonyourcomputerscreentoinstalltheEpsonUSBDisplaysoftware(youneedtoinstallthesoftwareonlythefirsttimeyouconnect).Afterthesoftwarehasbeeninstalled,youseeyourcomputer’sscreendisplayedbytheprojector.
NOTE Ifyouseea“DigitalSignatureWarning”whileinstallingthesoftware,selectContinue.
Youcanconnectanoptionalaudiocableifyouwanttoplaysoundthroughtheprojector.SeetheUser’s GuideonyourCD-ROMforinstructions.
3 Plug in and turn on 1 OpentheA/V Muteslide(lenscover).
2 Connectthepowercordtotheprojectorandplugtheotherendintoanelectricaloutlet.
The powerlightontheprojectorturnsorange.
3 Turnonyourcomputerorvideosource.
4 Pressthe powerbuttonontheprojectororremotecontrol.Theprojectorbeeps,the powerlightflashesgreen,andtheprojectorwarmsup.Whenthe powerlightstaysgreen,theprojectorisreadyforuse.
Turning off the projector 1 Ifyou’reusingacomputer,shutitdownfirst,whileyoucanstill seethedisplay.
2 Pressthe powerbuttonontheprojectororremotecontrol.
3 Whenyouseetheconfirmationmessage,pressthe powerbuttonagain.Theprojectorbeepstwiceandthe powerlightturnsorange.
WithEpson’sInstantOff®technology,there’snocool-downperiod.Whenyou’redone,justunplugtheprojectorandit’sreadytotravel.
Turn over
PowerLite® S6 Series/78/ W6 Series
1 Unpack the projector Youshouldhavethefollowingitems:
2 Choose a location Theprojectorsupports4viewingsetups:frontprojection,ceilingprojection,
rearprojection,andrear/ceilingprojection.Choosethebestoneforyourenvironment.Ifyouinstalltheprojectorinarearoroverheadposition,you’llneedtochoosethecorrectprojectionoptionfromtheExtendedmenu.SeetheUser’s GuideonyourCD-ROMforinstructions.
Thedistancebetweentheprojectorandthescreengenerallydeterminesthesizeoftheimage,butthesizecanalsovarydependingontheaspectratio(imageshape),howyouzoomintotheimage,andwhetheryou’veadjustedotherimagesettings.Dependingontheprojectormodelyouareusingandtheimagesettingsyou’vechosen,youcanplacetheprojectoranywherefrom33to412inches(84to1047cm)fromthescreen.
UsethetablesintheUser’s GuideortheImageSizecalculatorontheMultimediaProjectorspageonEpson’swebsitetohelpyoudeterminetheproperprojectiondistance.
PowercordVGAcable
PasswordProtectedsticker
Projectorremotecontrol
(PowerLiteS6Series/78)
Batteries
*411506000**411506000*
Projectorremotecontrol
(PowerLiteW6Series)
USBcable
Powerbutton
PowerLiteS6Series/78
Powerbutton
PowerLiteW6Series
PowerLiteS6Series/78
PowerLiteW6Series
Powerbutton
Powerlight
Projector Carryingcase
User’s GuideCD-ROM
4 Toselectthebestcolormode,presstheColor Modebuttonontheremotecontrol(PowerLiteW6Seriesonly).Pressitrepeatedlytomovethroughtheoptions.
YoucanalsoselecttheColor Modesettingfromtheprojector’sImagemenu.SeetheUser’s GuideonyourCD-ROMforinstructions.
SeeyourUser’s GuideontheCD-ROMformoreinformationaboutimageadjustments.
7 Install your User’s Guide and register your projector
1 InserttheprojectorCD-ROMinyourdrive.Iftheinstallerdoesn’topenautomatically,double-clicktheEpsonCD-ROMicon,thendouble-clicktheEpsoninstallericon.
2 SelectEnglish.
3 Followtheinstructionsonthescreentoregister.
NOTE Youcanalsoregisteratwww.epson.com/webreg.
4 Afteryouregistertheprojector,clickUser’s Guidetoinstallit.(IfyouareusingWindowsanddon’talreadyhaveAdobe®Reader®,clickAdobe Readerandfollowtheon-screeninstructionstoinstallit.)
5 Whenyou’redone,clickExit.
ToopenyourUser’s Guide,double-clicktheUser’s Guideicononyour desktop.
Where to get help Internet support VisitEpson’ssupportwebsiteatepson.com/supportandselectyour
productforsolutionstocommonproblems.Youcandownloadutilitiesanddocumentation,getFAQsandtroubleshootingadvice,ore-mailEpsonwithyourquestions.
Visithttp://www.presentersonline.comtoaccesstips,templates,and trainingfordevelopingsuccessfulpresentations.
Speak to a support representative TousetheEpsonPrivateLine®Supportservice,call(800)637-7661andenter
thePINontheEpsonPrivateLineSupportcardthatcamewithyourprojector.Thisserviceisavailable6AMto6PM,PacificTime,MondaythroughFriday,forthedurationofyourwarrantyperiod.Youmayalsospeakwithaprojectorsupportspecialistbydialingoneofthefollowingnumbers.(Tollorlongdistancechargesmayapply.)
U.S.:(562)276-4394,6AMto6PM,PacificTime,Monday-Friday Canada:(905)709-3839,6AMto6PM,PacificTime,Monday-Friday Daysandhoursofsupportaresubjecttochangewithoutnotice.
Purchase supplies and accessories YoucanpurchasescreensandotheraccessoriesfromanEpsonauthorized
reseller.Tofindthenearestreseller,call800-GO-EPSON(800-463-7766).Oryoucanpurchaseonlineatwww.epsonstore.com(U.S.sales)orwww.epson.ca(Canadiansales).
Connecting with an HDMI cable (PowerLite W6 Series only) Forthebestimageandsoundquality,connectyourvideoequipmentto
theHDMIport,ifpossible.
1 ConnectanHDMIcable(notincluded)totheHDMIportonyourvideoplayerandtheHDMIportontheprojector.
2 Startyourvideoorpresentation.UsetheSource SearchbuttonontheprojectorortheSearchorSource SearchbuttonontheremotecontroltoselecttheHDMIsource,ifnecessary.
Connecting with a component video cable Ifyourvideoequipmenthascomponentvideoconnectors(three
connectorslabeledeitherY/Cb/CrorY/Pb/Pr),youcanuseacomponent-to-VGAcable(notincluded)toconnecttheprojector.
Onceyou’veconnectedthecable(s),startyourvideoorpresentation.UsetheSource SearchbuttonontheprojectorortheSearchorSource Searchbuttonontheremotecontroltoselectthevideosource,ifnecessary.
Youcanconnectanoptionalaudiocableifyouwanttoplaysoundthroughtheprojector.SeetheUser’s GuideonyourCD-ROMforinstructions.
6 Adjust the image 1 Toraisetheimage,pressthefootreleaseleverandliftthefrontof
theprojector.Releasethelevertolockthefootinthepositionyouwant.
2 Rotatethefocusringtosharpentheimage.Toreduceorenlargetheimage,rotatethezoomring(PowerLite78/W6Seriesonly)orpresstheWide (enlarge)orTele (reduce)buttonontheprojector’scontrolpanel(PowerLiteS6Seriesonly).
3 Ifyourimagelookslike or ,firstmakesuretheprojectorisfacingthescreensquarely.Then,ifnecessary,pressthe and
buttonsontheprojector’scontrolpaneluntiltheimagelookscorrect.
EpsonandInstantOffareregisteredtrademarksandEpsonExceedYourVisionisaregisteredlogomarkofSeikoEpsonCorporation.PowerLiteandPrivateLineareregisteredtrademarksofEpsonAmerica,Inc.
GeneralNotice:Otherproductnamesusedhereinareforidentificationpurposesonlyandmaybetrademarksoftheirrespectiveowners.Epsondisclaimsanyandallrightsinthosemarks.
Thisinformationissubjecttochangewithoutnotice.
©2008EpsonAmerica,Inc.6/08
PrintedinXXXXXX CPD-25845
TroubleshootingIf you see a blank screenIfyouseeablankscreenortheNo signalmessageafterturningonyourcomputerorvideosource,checkthefollowing:
Makesurethe powerlightontheprojectorisgreenandnotflashingandtheA/V Muteslide(lenscover)isopen.
Makesurethecablesareconnectedcorrectly.(SeetheUser’s Guideformoreinformation.)
Ifyou’veconnectedmorethanonevideosource,youmayneedtopresstheSource SearchbuttonontheprojectorortheSearchorSource Searchbuttonontheremotecontroltoselecttheoneyouwanttowatch.(Allowafewsecondsfortheprojectortosyncupafterpressingit.)
If the projector and the notebook don’t display the same image
If you’re using a Windows notebook:
HolddowntheFnkeyandpressthefunctionkey(suchas orCRT/LCD)thatletsyoudisplayonanexternalmonitor.Onmostsystems,the orCRT/LCDkeyletsyoutogglebetweentheLCDscreenandtheprojector,ordisplayonbothatthesametime.
CheckyourmonitorsettingstomakesureboththeLCDscreenandtheexternalmonitorportareenabled.FromtheControlPanel,opentheDisplayutility.ClicktheSettingstab,thenclickAdvanced.Themethodforadjustingthesettingsvariesbybrand;youmayneedtoclickaMonitortab,thenmakesuretheexternalMonitorportissetasyourprimarydisplayand/orenabled.Seeyourcomputer’sdocumentationoronlinehelpfordetails.
If you’re using a Macintosh® notebook with Mac OS® X:
1 FromtheApple®menu,selectSystem Preferences,thenclickDisplay orDisplays.
2 SelectVGA DisplayorColor LCD,clickArrangementorArrange,andmakesureMirror Displays ischecked.
ColorModebutton(PowerLiteW6Seriesonly
Zoomring(PowerLite78/W6Seriesonly)
Focusring
4 Toselectthebestcolormode,presstheColor Modebuttonontheremotecontrol(PowerLiteW6Seriesonly).Pressitrepeatedlytomovethroughtheoptions.
YoucanalsoselecttheColor Modesettingfromtheprojector’sImagemenu.SeetheUser’s GuideonyourCD-ROMforinstructions.
SeeyourUser’s GuideontheCD-ROMformoreinformationaboutimageadjustments.
7 Install your User’s Guide and register your projector
1 InserttheprojectorCD-ROMinyourdrive.Iftheinstallerdoesn’topenautomatically,double-clicktheEpsonCD-ROMicon,thendouble-clicktheEpsoninstallericon.
2 SelectEnglish.
3 Followtheinstructionsonthescreentoregister.
NOTE Youcanalsoregisteratwww.epson.com/webreg.
4 Afteryouregistertheprojector,clickUser’s Guidetoinstallit.(IfyouareusingWindowsanddon’talreadyhaveAdobe®Reader®,clickAdobe Readerandfollowtheon-screeninstructionstoinstallit.)
5 Whenyou’redone,clickExit.
ToopenyourUser’s Guide,double-clicktheUser’s Guideicononyour desktop.
Where to get help Internet support VisitEpson’ssupportwebsiteatepson.com/supportandselectyour
productforsolutionstocommonproblems.Youcandownloadutilitiesanddocumentation,getFAQsandtroubleshootingadvice,ore-mailEpsonwithyourquestions.
Visithttp://www.presentersonline.comtoaccesstips,templates,and trainingfordevelopingsuccessfulpresentations.
Speak to a support representative TousetheEpsonPrivateLine®Supportservice,call(800)637-7661andenter
thePINontheEpsonPrivateLineSupportcardthatcamewithyourprojector.Thisserviceisavailable6AMto6PM,PacificTime,MondaythroughFriday,forthedurationofyourwarrantyperiod.Youmayalsospeakwithaprojectorsupportspecialistbydialingoneofthefollowingnumbers.(Tollorlongdistancechargesmayapply.)
U.S.:(562)276-4394,6AMto6PM,PacificTime,Monday-Friday Canada:(905)709-3839,6AMto6PM,PacificTime,Monday-Friday Daysandhoursofsupportaresubjecttochangewithoutnotice.
Purchase supplies and accessories YoucanpurchasescreensandotheraccessoriesfromanEpsonauthorized
reseller.Tofindthenearestreseller,call800-GO-EPSON(800-463-7766).Oryoucanpurchaseonlineatwww.epsonstore.com(U.S.sales)orwww.epson.ca(Canadiansales).
Connecting with an HDMI cable (PowerLite W6 Series only) Forthebestimageandsoundquality,connectyourvideoequipmentto
theHDMIport,ifpossible.
1 ConnectanHDMIcable(notincluded)totheHDMIportonyourvideoplayerandtheHDMIportontheprojector.
2 Startyourvideoorpresentation.UsetheSource SearchbuttonontheprojectorortheSearchorSource SearchbuttonontheremotecontroltoselecttheHDMIsource,ifnecessary.
Connecting with a component video cable Ifyourvideoequipmenthascomponentvideoconnectors(three
connectorslabeledeitherY/Cb/CrorY/Pb/Pr),youcanuseacomponent-to-VGAcable(notincluded)toconnecttheprojector.
Onceyou’veconnectedthecable(s),startyourvideoorpresentation.UsetheSource SearchbuttonontheprojectorortheSearchorSource Searchbuttonontheremotecontroltoselectthevideosource,ifnecessary.
Youcanconnectanoptionalaudiocableifyouwanttoplaysoundthroughtheprojector.SeetheUser’s GuideonyourCD-ROMforinstructions.
6 Adjust the image 1 Toraisetheimage,pressthefootreleaseleverandliftthefrontof
theprojector.Releasethelevertolockthefootinthepositionyouwant.
2 Rotatethefocusringtosharpentheimage.Toreduceorenlargetheimage,rotatethezoomring(PowerLite78/W6Seriesonly)orpresstheWide (enlarge)orTele (reduce)buttonontheprojector’scontrolpanel(PowerLiteS6Seriesonly).
3 Ifyourimagelookslike or ,firstmakesuretheprojectorisfacingthescreensquarely.Then,ifnecessary,pressthe and
buttonsontheprojector’scontrolpaneluntiltheimagelookscorrect.
EpsonandInstantOffareregisteredtrademarksandEpsonExceedYourVisionisaregisteredlogomarkofSeikoEpsonCorporation.PowerLiteandPrivateLineareregisteredtrademarksofEpsonAmerica,Inc.
GeneralNotice:Otherproductnamesusedhereinareforidentificationpurposesonlyandmaybetrademarksoftheirrespectiveowners.Epsondisclaimsanyandallrightsinthosemarks.
Thisinformationissubjecttochangewithoutnotice.
©2008EpsonAmerica,Inc.6/08
PrintedinXXXXXX CPD-25845
TroubleshootingIf you see a blank screenIfyouseeablankscreenortheNo signalmessageafterturningonyourcomputerorvideosource,checkthefollowing:
Makesurethe powerlightontheprojectorisgreenandnotflashingandtheA/V Muteslide(lenscover)isopen.
Makesurethecablesareconnectedcorrectly.(SeetheUser’s Guideformoreinformation.)
Ifyou’veconnectedmorethanonevideosource,youmayneedtopresstheSource SearchbuttonontheprojectorortheSearchorSource Searchbuttonontheremotecontroltoselecttheoneyouwanttowatch.(Allowafewsecondsfortheprojectortosyncupafterpressingit.)
If the projector and the notebook don’t display the same image
If you’re using a Windows notebook:
HolddowntheFnkeyandpressthefunctionkey(suchas orCRT/LCD)thatletsyoudisplayonanexternalmonitor.Onmostsystems,the orCRT/LCDkeyletsyoutogglebetweentheLCDscreenandtheprojector,ordisplayonbothatthesametime.
CheckyourmonitorsettingstomakesureboththeLCDscreenandtheexternalmonitorportareenabled.FromtheControlPanel,opentheDisplayutility.ClicktheSettingstab,thenclickAdvanced.Themethodforadjustingthesettingsvariesbybrand;youmayneedtoclickaMonitortab,thenmakesuretheexternalMonitorportissetasyourprimarydisplayand/orenabled.Seeyourcomputer’sdocumentationoronlinehelpfordetails.
If you’re using a Macintosh® notebook with Mac OS® X:
1 FromtheApple®menu,selectSystem Preferences,thenclickDisplay orDisplays.
2 SelectVGA DisplayorColor LCD,clickArrangementorArrange,andmakesureMirror Displays ischecked.
ColorModebutton(PowerLiteW6Seriesonly
Zoomring(PowerLite78/W6Seriesonly)
Focusring
4 Toselectthebestcolormode,presstheColor Modebuttonontheremotecontrol(PowerLiteW6Seriesonly).Pressitrepeatedlytomovethroughtheoptions.
YoucanalsoselecttheColor Modesettingfromtheprojector’sImagemenu.SeetheUser’s GuideonyourCD-ROMforinstructions.
SeeyourUser’s GuideontheCD-ROMformoreinformationaboutimageadjustments.
7 Install your User’s Guide and register your projector
1 InserttheprojectorCD-ROMinyourdrive.Iftheinstallerdoesn’topenautomatically,double-clicktheEpsonCD-ROMicon,thendouble-clicktheEpsoninstallericon.
2 SelectEnglish.
3 Followtheinstructionsonthescreentoregister.
NOTE Youcanalsoregisteratwww.epson.com/webreg.
4 Afteryouregistertheprojector,clickUser’s Guidetoinstallit.(IfyouareusingWindowsanddon’talreadyhaveAdobe®Reader®,clickAdobe Readerandfollowtheon-screeninstructionstoinstallit.)
5 Whenyou’redone,clickExit.
ToopenyourUser’s Guide,double-clicktheUser’s Guideicononyour desktop.
Where to get help Internet support VisitEpson’ssupportwebsiteatepson.com/supportandselectyour
productforsolutionstocommonproblems.Youcandownloadutilitiesanddocumentation,getFAQsandtroubleshootingadvice,ore-mailEpsonwithyourquestions.
Visithttp://www.presentersonline.comtoaccesstips,templates,and trainingfordevelopingsuccessfulpresentations.
Speak to a support representative TousetheEpsonPrivateLine®Supportservice,call(800)637-7661andenter
thePINontheEpsonPrivateLineSupportcardthatcamewithyourprojector.Thisserviceisavailable6AMto6PM,PacificTime,MondaythroughFriday,forthedurationofyourwarrantyperiod.Youmayalsospeakwithaprojectorsupportspecialistbydialingoneofthefollowingnumbers.(Tollorlongdistancechargesmayapply.)
U.S.:(562)276-4394,6AMto6PM,PacificTime,Monday-Friday Canada:(905)709-3839,6AMto6PM,PacificTime,Monday-Friday Daysandhoursofsupportaresubjecttochangewithoutnotice.
Purchase supplies and accessories YoucanpurchasescreensandotheraccessoriesfromanEpsonauthorized
reseller.Tofindthenearestreseller,call800-GO-EPSON(800-463-7766).Oryoucanpurchaseonlineatwww.epsonstore.com(U.S.sales)orwww.epson.ca(Canadiansales).
Connecting with an HDMI cable (PowerLite W6 Series only) Forthebestimageandsoundquality,connectyourvideoequipmentto
theHDMIport,ifpossible.
1 ConnectanHDMIcable(notincluded)totheHDMIportonyourvideoplayerandtheHDMIportontheprojector.
2 Startyourvideoorpresentation.UsetheSource SearchbuttonontheprojectorortheSearchorSource SearchbuttonontheremotecontroltoselecttheHDMIsource,ifnecessary.
Connecting with a component video cable Ifyourvideoequipmenthascomponentvideoconnectors(three
connectorslabeledeitherY/Cb/CrorY/Pb/Pr),youcanuseacomponent-to-VGAcable(notincluded)toconnecttheprojector.
Onceyou’veconnectedthecable(s),startyourvideoorpresentation.UsetheSource SearchbuttonontheprojectorortheSearchorSource Searchbuttonontheremotecontroltoselectthevideosource,ifnecessary.
Youcanconnectanoptionalaudiocableifyouwanttoplaysoundthroughtheprojector.SeetheUser’s GuideonyourCD-ROMforinstructions.
6 Adjust the image 1 Toraisetheimage,pressthefootreleaseleverandliftthefrontof
theprojector.Releasethelevertolockthefootinthepositionyouwant.
2 Rotatethefocusringtosharpentheimage.Toreduceorenlargetheimage,rotatethezoomring(PowerLite78/W6Seriesonly)orpresstheWide (enlarge)orTele (reduce)buttonontheprojector’scontrolpanel(PowerLiteS6Seriesonly).
3 Ifyourimagelookslike or ,firstmakesuretheprojectorisfacingthescreensquarely.Then,ifnecessary,pressthe and
buttonsontheprojector’scontrolpaneluntiltheimagelookscorrect.
EpsonandInstantOffareregisteredtrademarksandEpsonExceedYourVisionisaregisteredlogomarkofSeikoEpsonCorporation.PowerLiteandPrivateLineareregisteredtrademarksofEpsonAmerica,Inc.
GeneralNotice:Otherproductnamesusedhereinareforidentificationpurposesonlyandmaybetrademarksoftheirrespectiveowners.Epsondisclaimsanyandallrightsinthosemarks.
Thisinformationissubjecttochangewithoutnotice.
©2008EpsonAmerica,Inc.6/08
PrintedinXXXXXX CPD-25845
TroubleshootingIf you see a blank screenIfyouseeablankscreenortheNo signalmessageafterturningonyourcomputerorvideosource,checkthefollowing:
Makesurethe powerlightontheprojectorisgreenandnotflashingandtheA/V Muteslide(lenscover)isopen.
Makesurethecablesareconnectedcorrectly.(SeetheUser’s Guideformoreinformation.)
Ifyou’veconnectedmorethanonevideosource,youmayneedtopresstheSource SearchbuttonontheprojectorortheSearchorSource Searchbuttonontheremotecontroltoselecttheoneyouwanttowatch.(Allowafewsecondsfortheprojectortosyncupafterpressingit.)
If the projector and the notebook don’t display the same image
If you’re using a Windows notebook:
HolddowntheFnkeyandpressthefunctionkey(suchas orCRT/LCD)thatletsyoudisplayonanexternalmonitor.Onmostsystems,the orCRT/LCDkeyletsyoutogglebetweentheLCDscreenandtheprojector,ordisplayonbothatthesametime.
CheckyourmonitorsettingstomakesureboththeLCDscreenandtheexternalmonitorportareenabled.FromtheControlPanel,opentheDisplayutility.ClicktheSettingstab,thenclickAdvanced.Themethodforadjustingthesettingsvariesbybrand;youmayneedtoclickaMonitortab,thenmakesuretheexternalMonitorportissetasyourprimarydisplayand/orenabled.Seeyourcomputer’sdocumentationoronlinehelpfordetails.
If you’re using a Macintosh® notebook with Mac OS® X:
1 FromtheApple®menu,selectSystem Preferences,thenclickDisplay orDisplays.
2 SelectVGA DisplayorColor LCD,clickArrangementorArrange,andmakesureMirror Displays ischecked.
ColorModebutton(PowerLiteW6Seriesonly
Zoomring(PowerLite78/W6Seriesonly)
Focusring
top related