presentación de powerpoint - iam3dhub.orgiam3dhub.org/wp-content/uploads/2018/05/iam3dhub-1.pdf ·...
Post on 30-Aug-2018
215 Views
Preview:
TRANSCRIPT
Placed in Terrassa, 35 km north of Barcelona, from 1906 Leitat is a Technological Institute whose objective is to collaborate with companies and other organizations to create sustainable economic and social development, through research, development, industrial innovation and new technological processes, from efficiency and creativity.
Leitat
LeitatHEADQUARTERSTERRASSA
BCN 22@ - NANOTECH
HELIX & CLUSTER BUILDING - BIO VILANOVA del CAMÍ
SANTIAGO de CHILE
MISSION / VISION
IAM 3DHub, The International Advanced Manufacturing 3D Hub, has been set up with an International scope, with
AM/3DP
Ecosystem
IAM
A Mission:
“To accelerate adoption and developmentof additive manufacturing and 3D printing technologies in the European Union manufacturing sectors as an alternative way to design, develop and manufacturenew competitive products and servicesthat strengthens their competitiveness”
& A Vision:
Defined as a Digital Innovation Hub & Competence Center in Additive Manufacturing and 3D Printing will provide SMEs a “One-Stop” Shop to assess, guide and address all their needs in AM .
TYPE OF ENTITIES INVOLVED
Technological Players
Training, Business & Economical Players
SW providersMaterial providersAM/3DP Technology ProvidersPost processing and validation equipment providersCertification LaboratoriesResearch Organizations
Industrial Innovation AdvisorsVenture Capital Investors Clusters and Industry AssociationsSchools, Colleges, UniversitiesStart Up IncubatorsPublic AdministrationsTrade Fair Organizations
IAM 3D HubDigital Innovation Hub & Competence Center
in Additive Manufacturing & 3DPrinting
iam3dhub.org
Digital Innovation Hub in Europe WHERE
PHASE 1
12.000m2
Barcelona
PHASE 0
Leitat’s Facilities
0
1
2017 2019
700m2 + Shared labs
IS PROVIDING
Education & TrainingIndustry and Academia
R+D, Facing
Industry challenges
• Gain confidence
• Validate AM technologies…
• Asses manufacturing capabilities…
Experimenting & Testing
• AM value chain design and validation
• AM value chain implementation
End to End Solutions • Accelerate adoption
• Business models definition & assessment
• Start-up new business…
Business & Mentoring
Journey to AM/3DP adoption
EXPERIMENTING & TESTING + END TO END SOLUTIONS
• AM value chain design and validation
• AM value chain implementation
Join companies in their journey to the adoption of additive
manufacturing and 3d printing by:
• Concentrating resources, capabilities and knowledge to
offer high level competence in the technologies so to
perform experimentation and testing to gain confidence,
benchmarking of AM/3DP technologies, asses and
validate 3D Printing manufacturing capabilities.
• Developing end to end solutions in a Living Lab
environment where to design, explore, redefine new
products in real scenarios, assess their feasibility and
innovative impact before their production.
• Offering incubators and pilot lines to validate
production at an industrial scale.
• Offering validation and certification laboratories to
facilitate the introduction of AM/3DP products into the
market.
• AM value chain design and validation
• AM value chain implementation
WHAT
Technology Assessment
Identification of emerging technologies
and adoption acceleration
Start up generation
Market studies
IP Protection analysis
Commercial feasibility studies
Identification of routes to market
Business models definition & assessment
Funding support to new business
Identification of partners and collaborators
IP Protection
IP Licensing
Go to market and sales strategies
Start-up new business. Business Innovation.
Sta
rt-u
p ne
wbu
ssin
ess
BUSINESS & MENTORING
• AM value chain design and validation
• AM value chain implementation
Acc
eler
ate
adop
tion
WHAT
Readiness level assessment.
Analysis of adoption’s potential.
Identify and address technical challenges to enable
full-scale production.
Develop operating procedures, specifications and
standards.
Design and implementation strategy
Simulation and validation of AM integration at a
factory level
Supply chain development
Support with make-versus-buy decisions.
Simulation and validation of AM integration at a
business level.
Accelerate adoption of AM/3DP solutions
• AM value chain design and validation
• AM value chain implementation
RESEARCH & DEVELOPMENT
Face industrial challenges and unsolved needs by:
• R+D in specific unsolved needs along de value chain:
Design tools –software, guides…- to exploit the benefits of AM.
Formulation, development, characterization, validation and
certification of new AM/3DP materials for manufacturing
purposes.
Health, safety handling and recovery of AM/3DP materials
New consolidation processes. Process Monitoring & Control.
Process Parameters Development & Optimization.
Development of automated cost-effective finishing solutions
Development of industrial standards for 3D printed parts and
AM processes to guarantee industry quality requirements.
Design MaterialsAM/3DP
ProcessesPost
ProcessesValidation Application
EDUCATION & TRAINING
• AM value chain design and validation
• AM value chain implementation
Close the digital skills gap. Promote digital skills at all levels, for re-
skilling, and for lifelong learning:
Engage local and international educational and training
entities to develop industrial training and academia
programs.
Define and provide customized training and coaching
programs.
Attract the best international talent in AM and promote a
network of expertise.
RESOURCES
AM/3DP devoted software
Design and 3D modelling
DfAM tool for topological and geometrical optimization.
Modelling and multiphysics simulation
Analysis of meshed models, and build preparation
AM/3DP entrusted equipment (hardware).
Technology Manufacturer Equipment Material TypeSelective Laser Melting (SLM) Renishaw AM250 200W
AM400 400 WS.Steel; Maraging steel, , CrCo, Aluminum Titanium Inconel
316L; 1.2709AlSi10Mg, Ti6Al4V
Multi Jet Fusion (MJF) HP 8 x MB3 Systems PA PA12, PA12 GB, PA11
Stereolithography (SLA) Formlabs Form 2 Resins Clear, White, Tough, Durable
Fused Deposition Modeling (FDM) Stratasys Dimension ABS -Material extrusion BCN3D Technologies BCN3D+ ABS, PLA, PA -Material extrusion BCN3D Tech.modified by Leitat Special inks dispenser Conductive Inks -Ancillary/support and post processing equipment: Sand blasters & Vibrational Polishing entrusted by Coniex, Dyeing, CNC milling machine, ovens, chillers, etc.
Laboratories. 3D Scanning and Reverse Engineering
Physical characterization of materials.
Optical and electronic microscopy.
Chemical analysis and synthesis.
Preparation and characterization of nanomaterials and nanofibers.
Synthesis and processing of polymers.
Functional coatings and surface treatments.
Electrochemical and photonics.
Metrology.
Reaction to fire.
Automation and Robotics.
Electronics.
Biochemical and electrochemical sensors.
top related