presentation prihoda malaysia sdn bhd

WELCOME

What is Fabric Ducting?

- New technology on cool air distribution replacing conventional G.I

- Carries 2 in 1 function as a ducting & diffuser

- Made from 100% polyester fabric with few choices color to suit on the design

What is Fabric Ducting?

4 Major Air Side Problem

1 - Short Circuit Problem2 - Condensation3 - Need proper balancing4 - Heavy

Advantages Fabric Duct

1 – Even distribution2 – No Condensation3 – No need proper balancing4 - Lightweight

Short Circuit problems

Lecture Hall FF4 Uitm Puncak Alam

Cooling Load Factor : 40Btu/hr/ft2

3 unit 30 HP Packaged DX SystemAchievement : Temperature during TnC is 20oCCLF 40 is almost same with bedroom.

Common Problem in Conventional GI Ducting

- Reduce Productivity- Stress- MC Leave Increase- Customer unhappy- Lost customer trust- Drop branding image- Lost Focus in Class / Mosque- Bad Result scoring

Short Circuit Problem

- Draft Air Flow- Discomfort room condition - Extra cooling load

- Unit Oversize- high electricity bills - High maintenance cost- Loss profit- Wasting Government money- Noisy sound

Fabric Duct Solutions

Condensation

- Required Insulation- Spotted mark on the ceiling- Dirty space- Bad smell- Additional repair cost- Impact Company Image- Loss customer trust

Common Problem in Conventional GI Ducting

Puncak Alam Mosque

Cooling Load Factor : 80Btu/hr/ft2

2 unit 90 HP Air Cooled Dx System with double Cooling CoilsAchievement : • No Condensation at duct, not required insulation.• Entering air 32oC, Outlet air From fabric duct 19oC• First ever project centralized system used at open space

Need crazy balancing works

- Required skills workers- Extra Cost rent test equipment- The Test Not perform well- Risk of Short Circuit- Inefficient overall Air- Conditioning performance- Waste initial spending cost- Project Delay- Bad Company reputation

Common Problem in Conventional GI Ducting

Spot Cooling

Imtiaz Terengganu School Hall

Cooling Load Factor : 115Btu/hr/ft2

2 unit 100HPResult : * Testing & Commissioning Temp : 18oC* Hand Over ceremony only one unit on.

UIA Gambang Library

Achievement : Only 2 days complete 4 lines of fabric duct installation, compare to almost 2 weeks for GI duct

The Result

Heavy (30-60kg/m2 )

- Need strong structure- Extra cost for structure strengthen- Required Strong Lifting Equipment- Longer time to install- Skills Workers Required - More workers needed- Project delay- Risk to Death

Common Problem in Conventional GI Ducting

Audi Showroom Shah Alam

Cooling Load Factor : 80Btu/hr/ft2

2 unit 30 HP Packaged DX SystemAchievement : No need high cost structure strengthening works.

BENEFITS – End User• Even cooling distribution• Comfort working environment• Increase productivity• Increase Sales & profit• Good branding Image• Save electricity bill • Quiet operation• Save space• Nice & unique design• Easy Maintenance• 10 years Warranty

Fabric Ducting Parts of the design

Fabric Ducting Parts of the

design

GI DUCT VS FABRIC DUCT• Spot cooling

• Noisy (high velocity)

• Required balancing

• Heavy (30 - 60kg/m2)

• High running cost

• Required Diffusers

• Difficult to clean

• On Site assembly

• Skill installer

• Even distribution

• Quite operation (Laminar Flow)

• Self balancing

• Light Weight 4 - 8kg/m2

• Low running cost

• No Diffusers (2 in 1)

• Easy to clean

• Ready to install

• D.I.Y

Local Projects

HELP University

Lecture Hall Uitm Puncak Alam

Section 7, Shah Alam Mosque

Subang Air-Port

UMP GAMBANG

Puncak Alam Mosque

DBKL Batu Muda Hall

Masjid Kuantan

Da-Men Mall USJ

Kayaku Factory

Masjid Hasanah Bangi

Masjid Atas Tol Terengganu

Kompleks PKNS

Dewan Bomba Penang

Ecoworld Puncak Alam

Oversea Project

Offices

Lecture Hall

Temporary Space

SPORTS

FITNESS

The End