process plant layout and piping design
Post on 17-Dec-2015
117 Views
Preview:
DESCRIPTION
TRANSCRIPT
-
Two Days Training Workshop:
www.marcepinc.com info@marcepinc.com
PROCESS PLANT LAYOUT AND PIPING DESIGN
R
conceived, produced & organized by:
th th
13 - 14 July 2015
Ahmedabad
th th
15 - 16 July 2015
New Delhi
Designing Process plants are complex and demanding. Process Plant Layout and Design is an important component of the overall
operations of a business, both in terms of maximizing the effectiveness of the production process and meeting the needs. A good
plant layout can not only reduce capitalized cost but also improve safety of the plant and reduce hazards and environmental
impact. Process Plants such as refineries and petrochemical plants are complex facilities consisting of equipment, piping
systems, instruments, electrical systems, electronics and control systems. It is a multi disciplinary effort. Plant Layout and Design
of piping system constitutes a major part of the design and engineering effort. The basic and prime objective is to design safe and
dependable processing facilities in a cost effective manner.
This program focus on plant layout design with piping systems, including preliminary sizing and mechanical design of process
equipment , equipment configuration , development of plot plans optimization of plant layout , design procedures , applicable
regulations codes and standards. Plant Layout and Piping Design The workshop is integrated, comprehensive and highly
interactive. It combines structures & focused presentations and discussions of topic covered with relevant examples.
To maximize learning's, optimal question & answer sessions are in between discussions and also at the end of the sessions and an
opportunity for discussing specific design and layout problems they may carry in their experience.
Who should Attend :
This is addressed to personnel who want to understand the design and engineering principles in process plant layout and
piping design.
Personnel's from EPC (Engineering , Procurement and Construction )
Process Engineers from chemical plants
Mechanical site engineers
Piping Designers and Piping Engineers
Project Engineers
Personnel providing CAD support for Plant layout and Piping Design
Personnel involved in Instrumentation and control process plants
Equipment Designers
Plant Maintenance Personnel
PIPE ROUTING CONCEPTS - THE PRACTICAL GUIDELINES
-
Course Faculty: Mr. Y. N. Vasudeva [Managing Director, VK Design Techniques India Pvt Ltd.]
An expert in PDS, AutoCAD, Microstation, Bricscad, SSPIPE-2007 in equipment and piping modeling has over 25
years of experience in the field and was a principle piping engineer with Foster Wheeler and was a principle piping
engineer with Worley Parsons, Oman. He has served in inspection integrity and corrosion monitoring contract of
PDO- Petroleum development of Oman the largest on shore crude oil producer in Oman with major tie-ups on oil
technology companies like Shell. His responsibilities include Identifying equipments, piping components and
instruments at site update the existing of P & ID layouts as per site survey. 3D MODELLING OF PIPELINES using in
house cad package for New and Modification and existing facilities. His core strength is in the area of design pressure
vessels, storage tanks, Heat Exchangers and Piping selection & sizing. He is a life member of ISHRAE Bangalore
chapter
He is Conversant with codes: ASME sec. viii div.1 ad sec II part-d and ASME B 31.3, API 650,
API-620, He has already conducted more than 20 corporate trainings in Piping Domain & Software to major companies
like, L&T Valdel, L&T Engineering, Rolta India, IGCAR, Praxair, etc.
Presently he is running a Design engineering firm in Bangalore namely VK Design Techniques (India) Pvt. Ltd. providing
services in Design Engineering Construction, Plant Inspection services for Petrochemicals and Refineries and has
provided services in the following domain expertise Design & Engineering, Plant Inspection Services, NDT (Non
Destructive Testing Services), Pre-commissioning & Post Commissioning Assistance , Project Management.
www.marcepinc.com info@marcepinc.com
Two Days Training Workshop:
th th
13 - 14 July 2015
Ahmedabad
th th
15 - 16 July 2015
New Delhi
PIPE ROUTING CONCEPTS - THE PRACTICAL GUIDELINES
PROCESS PLANT LAYOUT AND PIPING DESIGN
-
TWO DAYS TRAINING AGENDA:
www.marcepinc.com info@marcepinc.com
Day- One
Day- Two
Vendor drawing study
Nozzle detail study
P&ID and PMS Study
Equipment location as per equipment spacing chart
Nozzle location, Orientation & Elevation calculations study
Mandatory & Statutory norms to be followed as per code/standards
Flow direction and meter run needs for orifice flanges
Valve location criteria Study
Importance of control station and Minimum Spool Requirement Study
Plant Layout Specification to be considered apart from checklist. ref .vol-
Prepare Single line Pipe routing sketch as per the guideline checklist sheet.
Prepare Pipe support markings Logical, Anchor, Limit Stop, Guide
Preparation of Piping Isometric hand sketch as per your single line routing.
3D Modeling of Plant Equipments with Nozzles
3D pipe Routing with Pipe Fittings, Valves and Instruments.
Preparation of Piping MTO in Manual sheet or MS Excel
Pipe Routing Concept Exercise
Plant Co-ordinate systems - readout exercises
Locating Bench Mark/Origin/Datum Point
Piping Basic Terminology and Symbols (Grade, Elevations)
Equipment Spacing Chart usage GE Gap Analysis / OISD Guidelines
Site plan, Plot plan, DCI-Drawing Control Index, Equipment Layout
P&ID Study
Pipe Fitting chart Readout exercise Understanding types of Fittings
Orthographic Symbols & Isometric symbols used in Piping Discipline
Conversion of Ortho to ISO & ISO to Ortho Views
Slope Calculations
Pipe Rack Width Calculations Based on Pipe Spacing chart
Piping Isometric generation using AutoCAD
Piping isometric checklist
Piping MTO
Plant North & UTM North -Definitions
-
PARTICIPATION DETAILS
Please register the following delegate/s
for(For Additional delegates please photocopy this form)
Suite 12,Sagar Tower,Off S.V. Road,Opp 24 Carat
Jogeshwari (W). Mumbai-400102. India
Marcep Inc.
Organisation Details & Authorization:
I / We Hereby Confirm To The Above And Authorize Our Participants To The Programme. Please Send The Invoice To:
Company Name:
Nominating Authority:
Designation: Email:
Company Postal Address:
Tel No.:
* This Booking is Invalid Without SignatureSignature
Participation Fees Include: Workshop kit Documentation, Refreshment, Luncheon, Certificate Of Participation
www.marcepinc.com
NON- RESIDENTIAL PROGRAME
Name: Designation: Email:Mobile:
Cell No.:
For Registration:
Tel - 022-40510100
Fax - 022-40510102
info@marcepinc.com
Cinema
R
Marcep Inc. Terms and Conditions
Marcep Inc.
Marcep Inc. cancellation, postponement and substitution policy
Discounts
Payment terms upon completion and return of the registration form, full payment is required not later than
5 business days from the date of invoice. Payment must be received prior to the event date.
reserve the right to refuse admission to the event if payment has not been received.
you may substitute delegates at any time
by providing reasonable advance notice to Marcep Inc. in the event that Marcep Inc. postpones an event
for any reason and the delegate is unable to attend in on the revised date, you will receive a credit of the
contract fee paid. you may use this credit for another Marcep Inc. event to be mutually agreed, which must
occur within one year from the date of postponement except as specified above, no credits will be issued
for cancellations. There are no refunds given under any circumstances. Marcep Inc. is not responsible for
any loss or damage as a result of a substitution, alteration or cancellation/ postponement of an event.
Marcep Inc. will not take any liability whatsoever if the event is cancelled, rescheduled or postponed due
to act of god, natural calamities or any other emergency please note that while course speakers and
topics were confirmed at the time of marketing, circumstances beyond the control of the organization
reserve right to substitute, alter or cancel the speakers and/or topics Marcep Inc. reserves the right to alter
or modify the speakers and/or topics if necessary without any liability to you what so ever any
substitutions or alterations will be update as soon as possible.
All 'Early Bird' Discounts require payment at time of registration and before the cut-off date in
order to receive any discount. Offered discounts by Marcep Inc. (including team discounts) must also
require payment at the time of registration. All discount offers will stand cancel if payment not recieved at
time of registration.
For group nomination reply on:queries
rajkhanna@marcepinc.com
Registration page:
Payment Terms:
Payment Is Required Within 5 Working Days From the Date
Of Invoice. Account Transfer/Cheque/DD Should Be In Favour
Of Marcep Inc. Payable At Par In Mumbai.
Investment fees
01 Delegate - INR: 24,500/- (Base Price)
Service Tax @ 16%
Program coordinator: Mr. Raj Khanna on:
Cell:
or email: rajkhanna@marcepinc.com
09167469140
14% service tax (flat rate) +2% Swachh Bharat Cess (SBC)
th th
13 - 14 July 2015
Ahmedabad
th th
15 - 16 July 2015
New Delhi
PIPE ROUTING CONCEPTS - THE PRACTICAL GUIDELINES
PROCESS PLANT LAYOUT AND PIPING DESIGN
Page 1Page 2Page 3Page 4
top related