product catalogue · 2020. 1. 18. · catalogue. certificates and awards. i tolerance range for...
Post on 13-Aug-2021
7 Views
Preview:
TRANSCRIPT
PRODUCTCATALOGUE
CERTIFICATESAND AWARDS
TOLERANCE RANGE FOR THERMOELEMENTS / TO PN - EN 60584 -1 63I
THERMOCOUPLE INSERTS
MINERAL INSULATED THERMOCOUPLES
MINERAL INSULATED RESISTANCE THERMOMETERS
THERMOCOUPLES AND RESISTANCE THERMOMETERS WITH BAYONET
METAL SHEATHED THERMOCOUPLES
CERAMIC SHEATHED THERMOCOUPLES
METAL SHEATHED RESISTANCE THERMOMETERS
METAL SHEATHED CABLE RESISTANCE THERMOMETERS AND CABLE THERMOCOUPLES
MOUNTING THERMOWELLS FOR THERMOCOUPLES AND RESISTANCE THERMOMETERS
TESTING RESISTANCE THERMOMETERS SSPRT
THERMOCOUPLES FOR MEASURING THE MOLTEN PLASTIC
RESISTANCE THERMOMETERS WITH THE WALL-MOUNT HOUSING
PRECIOUS METAL TESTING THERMOCOUPLES TYPE S AND R
VELCRO THERMOCOUPLES
MAGNET THERMOCOUPLES AND RESISTANCE THERMOMETERS
TEMPERATURE SENSORS ASSEMBLED TO THE MACHINE PARTS
HAND HELD THERMOCOUPLES
HAND HELD RESISTANCE THERMOMETERS
ADJUSTABLE RING SENSOR
CABLE THERMOCOUPLES
THERMOCOUPLES WITH SPECIAL PROTECTION TUBES
EXTENSION CABLES FOR RESISTANCE THERMOMETERS AND THERMOCOUPLES
TERMINAL HEADS
COMPENSATED CONNECTORS
CONNECTOR ACCESSORIES
CABLE MARKING
THERMOCOUPLE AND RTD CABLES
TEMPERATURE TRANSMITTERS
COMPRESSION FITTINGS
BRACKETS AND FLANGES
2-3
4-7
8-11
12-15
16-17
18-19
2O-22
23-25
26-27
28
29
3O
31
32
33
34-36
37-39
4O-41
42-43
44-45
46-47
48-49
5O
51
52
53
54-59
6O
61
62
TABLE OF CONTENTS01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
TYPE PAGE
A
B
B
C
D
E
F
G
CLASSES AND RANGES OF THE INDUSTRIAL RESISTANCE THERMOMETERS, REFERENCE: PN-EN 60751:2009 63H
TABLE
CZAH
CZAH EXTENSION CABLES FOR RESISTANCE THERMOMETERS AND THERMOCOUPLES
CZAH EXTENSION CABLES FOR RESISTANCE THERMOMETERS AND THERMOCOUPLES
CZAH TERMINAL HEADS
CZAH TERMINAL HEADS
CZAH COMPENSATED CONNECTORS
CZAH COMPENSATED CONNECTORS
CZAH CONNECTOR ACCESSORIES
CZAH CONNECTOR ACCESSORIES
CABLE MARKING
CZAH CABLE MARKING
CZAH
CZAH
CZAH
CZAH
CZAH B
CZAH B
B
CZAH B
C
CZAH C
DCZAH
D
POMIAR
POMIAR
POMIAR
POMIAR
MAGNET THERMOCOUPLES AND RESISTANCE THERMOMETERS
POMIAR
MAGNET THERMOCOUPLES AND RESISTANCE THERMOMETERS
POMIAR
TEMPERATURE SENSORS ASSEMBLED TO THE MACHINE PARTS
POMIAR
TEMPERATURE SENSORS ASSEMBLED TO THE MACHINE PARTS
POMIAR
POMIAR
HAND HELD RESISTANCE THERMOMETERS
POMIAR
HAND HELD RESISTANCE THERMOMETERS
POMIAR
POMIAR
CABLE THERMOCOUPLES
POMIAR
CABLE THERMOCOUPLES
POMIAR
THERMOCOUPLES WITH SPECIAL PROTECTION TUBESPOMIAR
THERMOCOUPLES WITH SPECIAL PROTECTION TUBESPOMIAR
EXTENSION CABLES FOR RESISTANCE THERMOMETERS AND THERMOCOUPLESPOMIAR
EXTENSION CABLES FOR RESISTANCE THERMOMETERS AND THERMOCOUPLES
Sp.
Sp. MOUNTING THERMOWELLS FOR THERMOCOUPLES AND RESISTANCE THERMOMETERS
Sp. MOUNTING THERMOWELLS FOR THERMOCOUPLES AND RESISTANCE THERMOMETERS
Sp.
Sp.
Sp.
Sp. z z z
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.12-15
o.o.12-15
16-17
o.o.16-17
18-19o.o.18-19
Give sensor typeand its number;table 1 e.g.:1K - simplex2K – duplex
01 – 1K – 1 – 1050 – 3.0 – IZ1 – 1000
Measuring insert 01 (thermocouple). Simplex insert type K, Accuracy class "1", sensor length1050 mm, diameter of a sensor 3.0 mm,ceramic sheath IZ1 (4 x 8 x 12 x 100) total length of a sheath 1000 mm.
01sensor type
accuracy class
length diametersheath type
sheath length
Give accuracy class e.g..: 1, 2 or 3;table. I page 63
Give length L1 [mm]
Give sensor diameter; table 2
Give sheath material; table 3
Give sheath total length L2 [mm]
ORDERING CODE:ORDERING CODE:TAB.
01Measuring inserts are replaceable parts of thermocouples.
If an insert stops working or there are some serious measuring deviations
but a thermowell itself is not damaged, it is enough to replace only an insert.
THERMOCOUPLE INSERTS
01 1K 1 1050 3,0 IZ1 1000
Calibration certificate of our Accredited Laboratory upon request CALIBRATION
CERTIFICATE
L1 L2
Ø
2. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH POMIA
R
POMIAR
POMIAR
POMIAR
POMIAR
Give sheath material; table 3
POMIAR
Give sheath material; table 3
Give sheath total length L2 [mm]
POMIAR
Give sheath total length L2 [mm]
POMIAR S
p.
Sp.
Sp. z z
typez typez z o.o
.o.
o.o.
o.o.
o.
INSER TYPES INSER TYPES TAB. 1
SENSOR DIAMETER [mm] INSERT TYPE
0,35 R, S, B
0,5 J, K, S, R, B
1,0 K, J
1,5 K, J
2,0 K, J
3,0 K
3,26 J
*) For types N, T and E please contact the sales department
SENSOR DIAMETER *)SENSOR DIAMETER *)TAB. 2
SENSOR TYPE THERMO-ELECTRODES TYPE LONG-TERM OPERATING RANGE [°C] *) SHORT-TERM OPERATING RANGE [°C] *)
J Fe - CuNi +20 ÷ 700 -180 ÷ 750
T Cu - CuNi -185 ÷ 300 -250 ÷ 400
K NiCr - NiAl 0 ÷ 1100 -180 ÷ 1350
N NiCrSi - NiSi 0 ÷ 1100 -270 ÷ 1300
E NiCr - CuNi 0 ÷ 800 -40 ÷ 900
S PtRh10 - Pt 0 ÷ 1550 -50 ÷ 1750
R PtRh13 - Pt 0 ÷ 1600 -50 ÷ 1700
B PtRh30 - PtRh6 0 ÷ 1600 -50 ÷ 1700
*) Given temperature ranges are mostly dependent on the outer sheath material. Tolerance to PN-EN 60584-1, table I, page 63
TYPE DIMENSIONS NUMBER OF HOLES HOLE DIAMETER MATERIAL
IZ1 4 x 8 x 12 x 100 3) 2 Ø 4 610
IZ2 Ø 14 x 3.5 x 50 5) 4 Ø 3.5 610
IZ3 4) Ø 3.0 x 0.8 x L 2) 4 Ø 0.8 799
IZ4 4) Ø 4 x 0.8 x L 2) 4 Ø 0.8 799
IZ5 4) Ø 5.5 x 1.2 x L 2) 4 Ø 1.2 799
IZ6 4) Ø 8 x 1.5 x L 2) 4 Ø 1.5 799
IZ7 4) Ø 8.5 x 2 x L 2) 4 Ø 2.0 799
1) Other sheaths available on request2) L- sheath length depends on a customer's requirements3)Sheath with oval section and the length of 100 mm ( for longer inserts: multiple of 100 mm)4) Also used for simplex inserts5) Round sheath with the length of 50 mm (for longer inserts: multiple of 50 mm)
SHEATH TYPE 1)SHEATH TYPE TAB. 3
3.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH Ø
CZAH Ø 14 x 3.5 x 50
CZAH 14 x 3.5 x 50
IZ3
CZAH IZ3 4)
CZAH 4)
IZ4
CZAH IZ4 4)
CZAH 4)
IZ5
CZAH IZ5 4)
CZAH 4)
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
DIMENSIONSPOMIAR
DIMENSIONS
4 x 8 x 12 x 100 POMIAR
4 x 8 x 12 x 100 POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
INSERT TYPE
Sp.
INSERT TYPE
R, S, BSp.
R, S, B
J, K, S, R, BSp.
J, K, S, R, BSp. z z z z
-50 ÷ 1700
z -50 ÷ 1700 o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.
02 – 1K – 1 – 1000 – 310 – 6,0 – I1 – T2H – 1500 – TS201 – UGM126
Temperature sensor model 02 (MI thermocouple). Type K (NiCr-NiAl), accuracy class: 1, length beneath a tube: 1000 mm, sheath material 310, diameter: 6,0 mm, single insert with insulated hot junction. MI cable tipped with a pot seal (T2H) wih epoxy reisin for max teperature 220 °C. Cable 1500 mm2 long 2x 0.22 mm2 silicone insulated. Sensor additionally equipped with the moveable brass fitting with a ferrule.
ORDERING CODE:ORDERING CODE:TAB.
� MI thermocouples are designed for temperature measurement in various technological processes and in many different industries such as chemical, metallurgical, energy, plastic processing, etc.
� Various probe sheath materials are available and the sensors are suitable to measure the temperature in environ-ments with diverse chemial composition.
� Thermocouples are suitable for use at high temperatures
Give type and number of sensor (table 1) eg. 1K – simplex 2K – duplex
02sensor type
accuracy class
length sheath diameterhot
junction termination
typecable length
cable type
com-pression
fitting
temperature transmitter
Give accuracy class eg. 1, 2 or 3; table I, page 63
Give length 'L' [mm] always beneath the end of a sensor eg. beneath a terminal head or a tube
Give sheath material (table 2)
Give outer diameter Ø (table 3)
Give type of hot junction, (table 4)
Give required construction (table 5)
Give cable length 'Lp' [mm]
Give cable type (table 6a) in case of expansion joint give its type ( table B, page 51)
Give compression fitting type (table 7) skip if not requested
Give transmitter details (for thermocouples with head), type and range (table 8)
02 1K 1 1000 310 6,0 I1 T2H 1500 TS201 UG121D6M —
Temperature sensor model 02 (MI thermocouple). Type K (NiCr-NiAl), accuracy class: 1, length beneath a tube:
a pot seal (T2H) wih epoxy reisin for max teperature 220 °C. Cable 1500 mm
Give type and number of sensor (table 1) eg. 1K – simplex 2K – duplex
Give accuracy class eg. 1, 2 or 3; table I, page 63
Give length 'L' [mm] always beneath the end of a sensor eg. beneath a terminal head or a tube
Give sheath material (table 2)
Give outer diameter
Give type of hot junction, (table 4)
Give required construction (table 5)
Give cable length 'Lp' [mm]
Give cable type (table 6a) in case of expansion joint give its type ( table B, page 51)
Give compression fitting type (table 7) skip if not requested
Give transmitter details (for thermocouples with head), type and range (table 8)
LpL
L
Ø Ø
02 MINERAL INSULATED THERMOCOUPLES
Calibration certificate of our Accredited Laboratory upon request Calibration
CertifiCate
4. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH POMIA
R Sp.
z o.
o.
TEMPERATURE RANGE *)TEMPERATURE RANGE *)TAB. 1
MATERIAL DESCRIPTION AIR OPERATING TEMPERATURE
INC (Inconel 600; 2.4816) Nickel – chrome – iron alloy, with very good oxidation resistance and great high temperature resistance (to 1150 °C). Suitable for neutral, oxidising environment or vacuum. to 1150 °C
310 (H25N20S2; 1.4841) Steel comprised of 25%Cr – 20%Ni.Stainless steel, heatproof, oxidation-proof up to temperature of 1150 °C to 1150 °C
NIC (Nicrobell®) Nicrobell is nickel-chrome alloy with 1,4% of silicon oxide. Silicon ensure high oxidation resistance and strength at high temperature, up to 1250 °C to 1250 °C
OXL (OMEGACLAD® XL) OMEGACLAD® XL type of steel ensures excellent resistance at high temperature. It is resistant to oxidation, carburization and chlorination. Continuous operating temperature is up to 150 °C and short-term operation temperature: 1335 °C to 1335 °C
PYR (PYROSIL®) PYROSIL® ensures perfect mechanical strength, high corrosion resistance as well as durability and stability of EMF level during long-term usage at high temperature up to 1250 °C. to 1250 °C
321 (1.4541; 1H18N9T) Steel similar to grade 304 (18% Cr, 10% Ni) but with titanium as a stabilizer. to 900 °C
316 (1.4401; H17N13M2T) Steel similar to 304 (17% Cr, 9% Ni) with 3% of molybdenum. Because this steel grade is more corrosion resistant than 321 and 304, it is good for humid environment and for aplication in places threatened by corrosion (sea water). to 900 °C
304 (1.4301; 0H18N9) Austentic stainles steel 18%Cr-8%Ni. Corrosion resistant (with no excess oxidation and no resistance lost) up to 80 800 °C. It is the most popular acidproof material, easy for metalworking and welding. to 800 °C
PtRh10 Recommended for operating temperature 1550 °C, its melting point is 1850 °C. Most often used in neutral, oxidising environment or vacuum. to 1850 °C
OUTER DIAMETER Ø MINIMUM DIAMETER OF THERMO-ELECTRO-DES [mm]mm INCHES
0.5 0.020 0.08
1.0 0.039 0.15
1.5 0.059 0.23
2.0 0.079 0.30
3.0 0.118 0.45
4.5 0.177 0.68
6.0 0.236 0.90
8.0 0.315 1.20
*) Other diameters on request
SENSOR TYPE TYPE OF THERMO-ELECTRODES LONG-TERM OPERATING RANGE [°C] *) SHORT-TERM OPERATING RANGE [°C] *)
J Fe - CuNi +20 ÷ 700 -180 ÷ 750
T Cu - CuNi -185 ÷ 300 -250 ÷ 400
K NiCr - NiAl 0 ÷ 1100 -180 ÷ 1350
N NiCrSi - NiSi 0 ÷ 1100 -270 ÷ 1300
E NiCr - CuNi 0 ÷ 800 -40 ÷ 900
S PtRh10 - Pt 0 ÷ 1550 -50 ÷ 1750
R PtRh13 - Pt 0 ÷ 1600 -50 ÷ 1700
*) Given temperature ranges are mostly dependent on the outer sheath material of a cable. Tolerance to PN-EN 60584-1, table I, page 63
SHEATH MATERIALSHEATH MATERIALTAB. 2
STANDARD SENSOR DIAMETERS *)STANDARD SENSOR DIAMETERS *)TAB. 3
5.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH STANDARD SENSOR DIAMETERS *)
CZAH STANDARD SENSOR DIAMETERS *)
CZAH
CZAH
CZAH
CZAH STANDARD SENSOR DIAMETERS *)
CZAH STANDARD SENSOR DIAMETERS *)
CZAH
CZAH POMIA
R
POMIAR
POMIAR Steel comprised of 25%Cr – 20%Ni.
POMIAR Steel comprised of 25%Cr – 20%Ni.
Stainless steel, heatproof, oxidation-proof up to temperature of 1150 °C
POMIAR Stainless steel, heatproof, oxidation-proof up to temperature of 1150 °C
Nicrobell is nickel-chrome alloy with 1,4% of silicon oxide. Silicon ensure high oxidation resistance and strength at high
POMIAR Nicrobell is nickel-chrome alloy with 1,4% of silicon oxide. Silicon ensure high oxidation resistance and strength at high
temperature, up to 1250 °C
POMIAR
temperature, up to 1250 °C
OMEGACLAD® XL type of steel ensures excellent resistance at high temperature. It is resistant to oxidation, carburization and
POMIAR
OMEGACLAD® XL type of steel ensures excellent resistance at high temperature. It is resistant to oxidation, carburization and chlorination. Continuous operating temperature is up to 150 °C and short-term operation temperature: 1335 °C
POMIAR
chlorination. Continuous operating temperature is up to 150 °C and short-term operation temperature: 1335 °C
PYROSIL® ensures perfect mechanical strength, high corrosion resistance as well as durability and stability of
POMIAR
PYROSIL® ensures perfect mechanical strength, high corrosion resistance as well as durability and stability of EMF level during long-term usage at high temperature up to 1250 °C.
POMIAR
EMF level during long-term usage at high temperature up to 1250 °C.
Steel similar to grade 304 (18% Cr, 10% Ni) but with titanium as a stabilizer.
POMIAR
Steel similar to grade 304 (18% Cr, 10% Ni) but with titanium as a stabilizer.
Steel similar to 304 (17% Cr, 9% Ni) with 3% of molybdenum. Because this steel grade is more corrosion resistant than 321
POMIAR
Steel similar to 304 (17% Cr, 9% Ni) with 3% of molybdenum. Because this steel grade is more corrosion resistant than 321 and 304, it is good for humid environment and for aplication in places threatened by corrosion (sea water).
POMIAR
and 304, it is good for humid environment and for aplication in places threatened by corrosion (sea water).
Austentic stainles steel 18%Cr-8%Ni. Corrosion resistant (with no excess oxidation and no resistance lost) up to 80 800
POMIAR
Austentic stainles steel 18%Cr-8%Ni. Corrosion resistant (with no excess oxidation and no resistance lost) up to 80 800 °C. It is the most popular acidproof material, easy for metalworking and welding.
POMIAR
°C. It is the most popular acidproof material, easy for metalworking and welding.
Recommended for operating temperature 1550 °C, its melting point is 1850 °C. POMIAR
Recommended for operating temperature 1550 °C, its melting point is 1850 °C.
Sp.
Sp.
Sp.
Sp.
Sp.
Nickel – chrome – iron alloy, with very good oxidation resistance and great high temperature resistance
Sp.
Nickel – chrome – iron alloy, with very good oxidation resistance and great high temperature resistance (to 1150 °C). Suitable for neutral, oxidising environment or vacuum. Sp.
(to 1150 °C). Suitable for neutral, oxidising environment or vacuum.
Stainless steel, heatproof, oxidation-proof up to temperature of 1150 °CSp.
Stainless steel, heatproof, oxidation-proof up to temperature of 1150 °CSp. z z
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
-50 ÷ 1700 o.o.
-50 ÷ 1700
TERMINAL BLOCK OR MI CABLE WITH ELECTRODES *)
MODEL WK1 WK2 */**
Fixing screws M4 (33 mm distance)
70 mmL
*) other lenths available on request **) diameter of thermo-electrodes depends on a diameter of MI cable
TYPE POT SEAL WITH A CABLE *)
T1
to 120 °C
T1Hto 220 °C
For diameters from 0.5 mm to 4.5 mm. Connector operating range: 120 °C; T1H version to 220 °C
T2
to 120 °C
T2Hto 220 °C
For diameter 6.0 mm. Connector operating range: 120 °C, T2H version to 220 °C
T3
to 120 °C
T3Hto 220 °C
For diameter 6.0 mm. Connector operating range: 120 °C, T3H version to 220 °C. The additional seal protects a cable against breaking during bending.
*) if you require a connector for higher temperature, please contact the sales department**) different pot seals available on request
TYPE COMPENSATED CONNECTORS *) **)
SW1 to 220°C
SW10 to 350°C
SW100 to 650°C
SG1 to 220°C
SG10 to 350°C
SG100 to 650°C
MW1 to 220°C
MW10 to 350°C
MW100 to 650°C
MG1 to 220°C
MG10 to 350°C
MG100 to 650°C
*) colour depends on the type of a thermocouple **) other LEMO types available on request
PART NUMBER OF HOT JUNCION DESCRIPTION DRAWING
I1 Simplex Insulated Junction
I2 Duplex insulated junction **)
Z1 Grounded simplex junction
Z2 Grounded duplex junction *)
O1 Exposed simplex junction
O2 Exposed duplex junction
*) in case of duplex senssor, hot junctions are grounded also with each other. **) hot junctions are insulated from each other
30 mmL Lp
ø6 - 8 mm
30 mmL Lp
ø12 mm
30 mm17 mmL Lp
ø9 mm
30 mm
ø42 mm
L
HOT JUNCTION TYPESHOT JUNCTION TYPESTAB. 4
THERMOCOUPLE TERMINATION OPTIONS (TOO CHOOSE FROM)THERMOCOUPLE TERMINATION OPTIONS (TOO CHOOSE FROM)TAB. 5
6. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH MODEL
CZAH MODEL
CZAH
CZAH
CZAH
CZAH *) if you require a connector for higher temperature, please contact the sales department
CZAH *) if you require a connector for higher temperature, please contact the sales department**) different pot seals available on request
CZAH **) different pot seals available on request
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH POMIA
R
POMIAR
POMIAR
POMIAR
For diameter 6.0 mm. Connector operating range: 120 °C, T2H version to 220 °C
POMIAR
For diameter 6.0 mm. Connector operating range: 120 °C, T2H version to 220 °C
For diameter 6.0 mm. Connector operating range: 120 °C, T3H version to 220 °C. The additional
POMIAR
For diameter 6.0 mm. Connector operating range: 120 °C, T3H version to 220 °C. The additional seal protects a cable against breaking during bending.
POMIAR
seal protects a cable against breaking during bending.
POMIAR
POMIAR
POMIAR
Lp
POMIAR
Lp
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
17 mm POMIAR
17 mm POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. COMPENSATED CONNECTORS *) **)
Sp. COMPENSATED CONNECTORS *) **)
SW1
Sp.
SW1 to 220°C
Sp.
to 220°C
SW10
Sp.
SW10to 350°CSp.
to 350°C
SW100Sp.
SW100to 650°CSp.
to 650°CSp.
z z z COMPENSATED CONNECTORS *) **)z COMPENSATED CONNECTORS *) **)z o.o
.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.
MM T0.9 [S]
0.5 0.06
1.0 0.15
1.5 0.21
2.0 0.40
3.0 1.20
4.5 2.50
6.0 4.00
8.0 6.50
The additional element used to mount a thermocouple at the measuring location. In our offer there are many different types available. To choose the right fitting, see table F, page 61. Other types available on request.
The sensors can be supplied complete with cables of various design. The following isulation types are available: : PCV, PTFE, fiberglass, Kapton or combination of the mentioned materials. Standards cable sections are 0.22mm2 (7/0.2 mm). To choose the right cable, please see table D, page 54. If you required a cable not mentioned in the catalogue, please contact the sales department. The most common cables:TS201 - 2x0,22 mm2 – silicone insulatedTW204 - 2x0,22 mm2 – fiberglass insulated / stainless steel overbraid TT201 - 2x0,22 mm2 – Teflon insulatedTT204 - 2x0,22 mm2 - Teflon insulated / stainless steel overbraid
Response time of a temperature sensor depends mostly on the medium in which the temperature is measured. The results in the column on the righe, are given for tempera-ture sensors with an insulated hot junction and refer to water 0.4 m/s and value t0.9 (t0.9 = the time required for a sensor to reache 90% of the maximum, regarding its response for temperature change)
If the in-head signal tramsmitter is requested eg. for signal 4…20 mA, please provide all necessary details, such as: transmitter type, temperature range. List of transmitters is available in the table E, page 60.
COMPRESSION FITTING *)
MODEL KR12 with thread G1/2” KR24 with thread M24x1.5
*) other threads available on request
TERMINAL HEAD *) **)
TYPE B NA MA G1 G2
ø72 mm
72 mm
ø68,2 mm
73 mm
ø48,8 mm
52 mm
ø82 mm
87 mm
ø60 mm
64 mm
TYPE DA TL TS SEG (stal 316) KNN (plastic)
ø84 mm
90 mm
67 mm
ø30 mm
85 mm
ø19 mm
ø83 mm
70,5 mm
ø82 mm
87 mm
*) different terminal heads available on request**) for technical data see table A, page 50
14 mm 60 mm
G1/2”
L14 mm 60 mm
M24 x 1,5
L
CABLE TYPESCABLE TYPESTAB. 6 COMPRESSION FITTINGSCOMPRESSION FITTINGSTAB. 7
TEMPERATURE TRANSMITTERTEMPERATURE TRANSMITTERTAB. 8
ESTIMATED RESPONSE TIMEESTIMATED RESPONSE TIMETAB. 9
7.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH the right cable, please see table D, page 54. If you required a cable not mentioned in
CZAH the right cable, please see table D, page 54. If you required a cable not mentioned in the catalogue, please contact the sales department.
CZAH the catalogue, please contact the sales department.
The most common cables:
CZAH The most common cables:TS201 - 2x0,22 mm
CZAH TS201 - 2x0,22 mm2
CZAH 2 – silicone insulated
CZAH – silicone insulated
TW204 - 2x0,22 mm
CZAH TW204 - 2x0,22 mm2
CZAH 2 – fiberglass insulated / stainless steel overbraid
CZAH – fiberglass insulated / stainless steel overbraid
TT201 - 2x0,22 mm
CZAH TT201 - 2x0,22 mm2
CZAH 2 – Teflon insulated
CZAH – Teflon insulated
TT204 - 2x0,22 mm
CZAH TT204 - 2x0,22 mm2
CZAH 2 - Teflon insulated / stainless steel overbraid
CZAH - Teflon insulated / stainless steel overbraid
CZAH
CZAH
CZAH
CZAH
TAB. 8CZAH
TAB. 8
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR 85 m
m
POMIAR 85 m
m
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
ø19 mm
POMIAR
ø19 mm
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
The sensors can be supplied complete with cables of various design. The following
POMIAR
The sensors can be supplied complete with cables of various design. The following isulation types are available: : PCV, PTFE, fiberglass, Kapton or combination of the POMIA
R
isulation types are available: : PCV, PTFE, fiberglass, Kapton or combination of the mentioned materials. Standards cable sections are 0.22mmPOMIA
R
mentioned materials. Standards cable sections are 0.22mmthe right cable, please see table D, page 54. If you required a cable not mentioned in POMIA
R
the right cable, please see table D, page 54. If you required a cable not mentioned in the catalogue, please contact the sales department.POMIA
R
the catalogue, please contact the sales department.POMIAR
POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp. 87 m
m
Sp. 87 m
m
Sp.
Sp.
Sp.
SEGSp.
SEG (stal 316)Sp.
(stal 316)
z z z z o.o
.o.
o.o.
o.o.
o.o.
o.o.
o.G2o.
o.G2
CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
03 MINERAL INSULATED RESISTANCE THERMOMETERS
Calibration certificate of our Accredited Laboratory upon request CALIBRATION
CERTIFICATE
03 – Pt100 – A – 3,0 – 4 – 500 – T3H – 3000 – RT402 – UGS103 – 300 °C
Temperature sensor model 03 (resistance mineral insulated) Type Pt100, simplex, class A, diameter 3,0 mm, 4-wire design, length 50 mm (measured from a pot seal). Sensors ended with a pot seal T3H (spring loaded pot seal pro-tected with reisin for temperature of 220 °C). Cable 3000 mm long, Teflon insulated with stainless steel overbraid RT402, with a moveable ss fitting with thread M10x1 (UG101D3S). Operating range of the measuring part is up to a maximum of 300 °C.
ORDERING CODE:ORDERING CODE:TAB.
Mineral insulated resistance thermometers are intended to measure the temperature in difficult environments. Can be supplied as simplex or duplex. Operating range is -50 to + 600 °C. Sensors are characterised by a short response time and high insulation resistance. The mineral insulated construction allows sensor to be bent. Sensors availble in 2,3 and 4-wire configuration.
General Information:
� Sensor type: Pt100; Pt500; Pt1000 or their multiple
� Sheath material: steel 316 (other materials possible after agreement)
� Sensor termination options: table 4
� Connection cables: according to a customer's requirements
� Minimum length of a sensor: because of measuring reasons the length should be no less than 60 mm.
Pt100 2xPt100 Pt500 Pt1000 2xPt500 2xPt1000
03sensor type
accu-racy
sheath diameter
wiring configura-
tion
measu-ring part
lengh
termina-tion type
cable length
cable type
com-pression
fitting
temperature transmitter
max operating tempera-
ture
Give accuacy class (table 1)
Give sheath diameter Ø ; table 2
Give wiring configuration; table 3(refers to one measuring element)
Give measuring part length L [mm]
Give construction type; table 4
Cable length [mm] (for a cable ended with a connector, please specify conector type; table 4
Give cable type; table 5
Give compressiong fitting type (skip if not requested)
Give transmitter details (for sensors with terminal head); table 7
Give max operating temperature of measuring part
03 Pt100 A 3,0 4 500 T3H 3000 RT402 UG101 D3S — 300 °C
Pt100 2xPt100 Pt500 Pt10002xPt5002xPt1000
Temperature sensor model 03 (resistance mineral insulated) Type Pt100, simplex, class A, diameter 3,0 mm, 4-wire
tected with reisin for temperature of 220 °C). Cable 3000 mm long, Teflon insulated with stainless steel overbraid
Give accuacy class (table 1)
Give sheath diameter
Give wiring configuration; table 3(refers to one measuring element)
Give measuring part length L [mm]
Give cable type; table 5
Give compressiong fitting type (skip if not requested)
Give transmitter details (for sensors with terminal head); table 7
Give max operating temperature of measuring part
L
Ø
L
Ø
8. CZAH
CZAH
CZAH
CZAH
CZAH
CZAH L
CZAH L
CZAH
CZAH POMIA
R
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Ø
POMIAR
Ø ; table 2
POMIAR
; table 2
Give wiring configuration; table 3
POMIAR
Give wiring configuration; table 3(refers to one measuring element)
POMIAR
(refers to one measuring element)
Give measuring part length L [mm]
POMIAR
Give measuring part length L [mm]
Give construction type; table 4
POMIAR
Give construction type; table 4
Cable length [mm] (for a cable ended with a connector, please specify conector
POMIAR
Cable length [mm] (for a cable ended with a connector, please specify conector type; table 4
POMIAR
type; table 4
Give cable type; table 5POMIAR
Give cable type; table 5POMIAR
POMIAR
POMIAR
Give construction type; table 4
POMIAR
Give construction type; table 4
Cable length [mm] (for a cable ended with a connector, please specify conector
POMIAR
Cable length [mm] (for a cable ended with a connector, please specify conector type; table 4
POMIAR
type; table 4
Give cable type; table 5POMIAR
Give cable type; table 5POMIAR S
p. Minimum length of a sensor: because of measuring reasons the length should be no less than 60 mm.
Sp. Minimum length of a sensor: because of measuring reasons the length should be no less than 60 mm.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
ring part
Sp.
ring part lengh Sp.
lengh
termina
Sp.
termina-
Sp.
-tion type
Sp.
tion typecable
Sp.
cable length
Sp.
lengthcable
Sp.
cable
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. z Minimum length of a sensor: because of measuring reasons the length should be no less than 60 mm. z Minimum length of a sensor: because of measuring reasons the length should be no less than 60 mm.
o.o.
Mineral insulated resistance thermometers are intended to measure the temperature in difficult environments. Can
o.o.
Mineral insulated resistance thermometers are intended to measure the temperature in difficult environments. Can Mineral insulated resistance thermometers are intended to measure the temperature in difficult environments. Can
o.o.
Mineral insulated resistance thermometers are intended to measure the temperature in difficult environments. Can be supplied as simplex or duplex. Operating range is -50 to + 600 °C. Sensors are characterised by a short response
o.o.be supplied as simplex or duplex. Operating range is -50 to + 600 °C. Sensors are characterised by a short response
time and high insulation resistance. The mineral insulated construction allows sensor to be bent. Sensors availble in
o.o.time and high insulation resistance. The mineral insulated construction allows sensor to be bent. Sensors availble in
CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
RESISTOR TOLERANCE CLASS AND OPERATING TEMP. RANGE *)RESISTOR TOLERANCE CLASS AND OPERATING TEMP. RANGE *)TAB. 1
NUMBER OF RESISTORSWIRE NUMBER (FOR ONE
RESISTOR)
TEMPERATURE SENSOR DIAMETER [mm] **)
Ø 3,0 Ø 4,5 Ø 6,0
1
2 X X X
3 X X X
4 X X X
2*
2 X X
3 X X
4 X
*) in case of 2 resistors the number of wires is double **) different diameters on request, eg. Ø 1,5 mm and Ø 2,0 mm
TOLERANCE CLASS
FOR WIRE WOUND RESISTORS FOR THIN FILM RESISTORS TOLERANCE VALUE **)
AA -50 ÷ +250 0 ÷ +150 ± ( 0.1+0.0017 I t I )
A -100 ÷ +450 -30 ÷ +300 ± ( 0.15+0.002 I t I )
B -196 ÷ +660 -50 ÷ +500 ± ( 0.3+0.005 I t I )
C -196 ÷ +660 -50 ÷ +600 ± ( 0.6+0.01 I t I )
*) to PN-EN60751:2009 **) I t I = temperature in °C no matter what unit (absolute value)
SIINGLE (ONE RESISTOR)
2-WIRE DESIGN 3-WIRE DESIGN 4-WIRE DESIGN
white
red
white
redred
whitewhite
redred
DOUBLE (2 RESISTORS)
2-WIRE DESIGN 3-WIRE DESIGN 4-WIRE DESIGN
white
red
yellow
black
white
redred
black
yellowyellow
whitewhite
redred
blackblack
yellowyellow
AVAILABLE CONSTRUCTIONS ( DEPENDING ON THE DIAMETER) **)AVAILABLE CONSTRUCTIONS ( DEPENDING ON THE DIAMETER) **)TAB. 2
WIRING CONFIGURATION AND COLOUR MARKINGWIRING CONFIGURATION AND COLOUR MARKINGTAB. 3
9.CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH 2-WIRE DESIGN
CZAH 2-WIRE DESIGN
CZAH
CZAH POMIA
R
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
*) in case of 2 resistors the number of wires is double **) different diameters on request, eg. Ø 1,5 mm and Ø 2,0 mm
POMIAR
*) in case of 2 resistors the number of wires is double **) different diameters on request, eg. Ø 1,5 mm and Ø 2,0 mm
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
SIINGLE (ONE RESISTOR)
POMIAR
SIINGLE (ONE RESISTOR)
3-WIRE DESIGN
POMIAR
3-WIRE DESIGN
POMIAR
white
POMIAR
white
POMIAR
POMIAR
POMIAR
WIRING CONFIGURATION AND COLOUR MARKING
POMIAR
WIRING CONFIGURATION AND COLOUR MARKING
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. X
Sp. X
X
Sp.
X
X
Sp.
X
XSp.
X
XSp.
X
z z z z z z z z mm z mm] **)z ] **)o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.
CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
SENSOR CONSTRUCTIONSENSOR CONSTRUCTIONTAB. 4
TYPE POT SEAL WITH A CABLE *) **)
T1 to 120 °C
T1H
to 220 °C
For diameters from 0.5 mm to 4.5 mm. Operating temperature for connector: 120 °C , T1H version to 220°C
T2 to 120 °C
T2H
to 220 °C
For diameter 6.0 mm. Operating temperature for connector: 120 °C, T2H version to 220°C
T3 to 120 °C
T3H
to 220 °C
For diameter 6.0 mm. Operating temperature for connector: 120 °C, T3H version to 220°C. Additional seal protects a cable against breaking during bending.
*) in case of higher operating temperature, please contact the sales department**) different types of pot seals available on request
30 mmL Lp
ø6 - 8 mm
30 mmL Lp
ø12 mm
30 mm17 mmL Lp
ø9 mm
COMPRESSION FITTING *)
TYPE KR12 with thread G1/2” KR24 with thread M24x1.5
14 mm 60 mm
M24 x 1,5
LL
*) different thread dimentions available on request
14 mm 60 mm
G1/2”
L
TYPE CONNECTOR *)
SW1 to 220°C
2-pin
SW2 to 220°C
3-pin
SW3 to 220°C
4-pin
MW1 to 220°C
2-pin
MW2 to 220°C
3-pin
MW3 to 220°C
4-pin
*) different LEMO types available on request
TERMINAL BLOCK OR MI CABLE WITH BARE ENDS *)
TYPE WK1 WK2 */**
Fixing screws M4 (33 mm distance)
70 mmL
*) different lenth available on request **) diameter of thermo-electrodes depends on a diameter of MI cable
30 mm
ø42 mm
L
10. CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH TYPECZAH TYPE
*) different lenth available on request **) diameter of thermo-electrodes depends on a diameter of MI cable
CZAH *) different lenth available on request **) diameter of thermo-electrodes depends on a diameter of MI cable
CZAH POMIA
R
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR Lp
POMIAR Lp
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
TERMINAL BLOCK OR MI CABLE WITH BARE ENDS *)
POMIAR
TERMINAL BLOCK OR MI CABLE WITH BARE ENDS *)
WK1
POMIAR
WK1
POMIAR
POMIAR
L
POMIAR
L
POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
For diameter 6.0 mm. Operating temperature for connector: 120 °C, T3H version to 220°C. Sp.
For diameter 6.0 mm. Operating temperature for connector: 120 °C, T3H version to 220°C. Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. MW1
Sp. MW1
to 220°C
Sp.
to 220°C2-pin
Sp.
2-pin
Sp.
MW2 Sp.
MW2 to 220°CSp.
to 220°C
z z z z z o.o
.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.
CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
TERMINAL HEAD *) **)
TYPE B NA MA G1 G2
ø72 mm
72 mm
ø68,2 mm
73 mm
ø48,8 mm
52 mm
ø82 mm
87 mm
ø60 mm
64 mm
TYPE DA TL TS SEG (stal 316) KNN (plastic)
ø84 mm
90 mm
67 mm
ø30 mm
85 mm
ø19 mm
ø83 mm
70,5 mm
ø82 mm
87 mm
*) different terminal heads available on request**) for technical data see table A, page 50
The sensors can be supplied complete with cables of various design. The following isulation types are available: PCV, PTFE, fiberglass, Kapton or combination of the mentioned materials. Standards cable sections are 0.22mm2 (7/0.2 mm). To choose the right cable, please see table D, page 54.
The most common cables:
RS301 - 3x0,22 mm2 – Silicone insulated / 3 wiresRS401 - 4x0,22 mm2 – Silicone insulated/ 4 wiredRW301 - 3x0,22 mm2 – fiberglass insulated/ steel overbraid, 3 wiresRW401 - 4x0,22 mm2 – fiberglass insulated / steel overbraid, 4 wires
If the in-head transmitter is requested eg. for signal 4…20 mA, please give all the necessary details, such as: transmitter type, temperature range. List of transmitters is available in the table E, page 60.
Additional element used to assemble a thermocouple at measuring loca-tion. We offer a wide range of types. To choose the appropriate fitting, see table F, page 61. Other types available on request.
CABLE TYPESCABLE TYPESTAB. 5
TEMPERATURE TRANSMITTERTEMPERATURE TRANSMITTERTAB. 7
COMPRESSION FITTINGSTAB. 6
11.CZAH
CZAH POMIA
R
POMIAR The sensors can be supplied complete with cables of various design. The following isulation types are
POMIAR The sensors can be supplied complete with cables of various design. The following isulation types are
available: PCV, PTFE, fiberglass, Kapton or combination of the mentioned materials. Standards cable
POMIAR available: PCV, PTFE, fiberglass, Kapton or combination of the mentioned materials. Standards cable
– fiberglass insulated / steel overbraid, 4 wires
POMIAR
– fiberglass insulated / steel overbraid, 4 wires
POMIAR
POMIAR Additional element used to assemble a thermocouple at measuring loca
POMIAR Additional element used to assemble a thermocouple at measuring loca
tion. We offer a wide range of types. To choose the appropriate fitting,
POMIAR tion. We offer a wide range of types. To choose the appropriate fitting,
see table F, page 61. Other types available on request.
POMIAR see table F, page 61. Other types available on request.
POMIAR
POMIAR
If the in-head transmitter is requested eg. for signal 4…20 mA, please give all the necessary details, such as: transmitter type, temperature range. List of transmitters is
POMIAR
If the in-head transmitter is requested eg. for signal 4…20 mA, please give all the necessary details, such as: transmitter type, temperature range. List of transmitters is
POMIAR
POMIAR
TEMPERATURE TRANSMITTER
POMIAR
TEMPERATURE TRANSMITTER
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Additional element used to assemble a thermocouple at measuring locaSp.
Additional element used to assemble a thermocouple at measuring location. We offer a wide range of types. To choose the appropriate fitting, Sp.
tion. We offer a wide range of types. To choose the appropriate fitting, Sp.
Sp.
COMPRESSION FITTINGSSp.
COMPRESSION FITTINGSSp.
Sp.
Sp.
Sp.
COMPRESSION FITTINGSSp.
COMPRESSION FITTINGSSp.
Sp.
Sp.
TAB. 6Sp.
TAB. 6
z z z 70,5 mm z 70,5 mm z o
.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o. (plastic)
o.o. (plastic)
o.o.
ø82 mmo.o.
ø82 mmo.o.
o.o.
o.o.
o.o.
o.o.
12. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
Sensors intended for temperature measurements in injection moulding machines, injection cylinders and machine parts exposed to overheating. Sensors can be made in two versions: thermocouple NiCr-NiAl (K) and Fe-CuNi (J) or resistance Pt100, Pt500, Pt1000. Operating range depends on a cable and is up to 400 °C.
Give type of measuring tip; table 3
04sensor type
accuracy class
hot junction type or
number of wires
type of measuring
tip
length of measuring
tip
cable length Lp
cabe type
bayonet connector
type / thread dimension
max. operating
temperature
Pt100, Pt500, Pt1000, J, K, T other types on request
Give accuracy class eg:1, 2 lor 3; table I, page 63
Give hot junction type or the number of wires, table 2 (eg. I1, Z1, 2, 3 or 4)
Give cable length [mm]
Give cable type; table 4
Give bayonet connector type / fitting thread, table 5 (skip if not requested)
Give maximum operating temperature [°C]
04 – J – 2 – I1 – KK3 – 30 – 1500 – TW204 – B1/KM101 – 400 °C
Temperature sensor model 04 (thermocouple), type J, accuracy class '2', insulated hot junction (I1), round braid made of steel grade 321, diameter Ø 6 mm, a 30 mm measuring tip, cable length 1500 mm in fiberglass insulation and metal braid (2 x 0,22 mm2). Bayonet connector with two slots, type B1 ( inside diameter 12,3 mm) and com-pression fitting with thread M10x1.
ORDERING CODE:ORDERING CODE:TAB.
Give measuring tip length L [mm]
04 J 2 I1 KK3 30 1500 TW204 B1/KM101 400
04 THERMOCOUPLES AND RESISTANCE THERMOMETERS WITH BAYONET
Calibration certificate of our Accredited Laboratory upon request CALIBRATION
CERTIFICATELs
= 1
50L
Ls =
150
Ø
Ø
Lp Lp
L
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH POMIA
R
POMIAR
Give type of measuring tip; table 3
POMIAR
Give type of measuring tip; table 3
POMIAR Give hot junction type or the number of wires,
POMIAR Give hot junction type or the number of wires,
POMIAR
Give cable length [mm]
POMIAR
Give cable length [mm]
POMIAR
Give cable type; table 4
POMIAR
Give cable type; table 4
POMIAR
Give bayonet connector type / fitting thread, table 5 (skip if not requested)
POMIAR
Give bayonet connector type / fitting thread, table 5 (skip if not requested)
Give maximum operating temperature [°C]POMIAR
Give maximum operating temperature [°C]POMIAR
Give measuring tip length L [mm]
POMIAR
Give measuring tip length L [mm]
POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. z z z z cable length z cable length cabe z cabe
typez type
o.o.Sensors intended for temperature measurements in injection moulding machines, injection cylinders and machine
o.o.Sensors intended for temperature measurements in injection moulding machines, injection cylinders and machine
parts exposed to overheating. Sensors can be made in two versions: thermocouple NiCr-NiAl (K) and Fe-CuNi (J) or
o.o.parts exposed to overheating. Sensors can be made in two versions: thermocouple NiCr-NiAl (K) and Fe-CuNi (J) or
o.o.
13.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
SENSOR TYPE *)SENSOR TYPE *)TAB. 1
TEMPERATURE RANGE FOR RESISTANCE THERMOMETERS
TOLERANCE CLASS
FOR WIRE WOUND RESISTORS FOR THIN FILM RESISTORS TOLERANCE VALUE **)
A -100 ÷ +300 -30 ÷ +300 ± ( 0.15+0.002 I t I )
B -196 ÷ +400 -50 ÷ +400 ± ( 0.3+0.005 I t I )
*) to PN-EN60751:2009
**) I t I = temperature in °C no matter what unit (absolute value)
TEMPERATURE RANGES FOR THERMOCOUPLES *)
SENSOR TYPE TYPE OF THERMO-ELECTRODES LONG-TERM OPERATING RANGE [°C] *) SHOR-TERM OPERATING RANGE [°C] *)
J Fe - CuNi +20 ÷ 400 -180 ÷ 400
T Cu - CuNi -185 ÷ 300 -250 ÷ 400
K NiCr - NiAl 0 ÷ 400 -180 ÷ 400
*) Given temperature ranges are mostly dependent on a cable and sheath material. Tolerance to PN-EN 60584-1, table I, page 63
SIINGLE (ONE RESISTOR)
2-WIRE DESIGN 3-WIRE DESIGN 4-WIRE DESIGN
white
red
white
redred
whitewhite
redred
HOT JUNCTION TYPES, WIRING CONFIGURATION AND COLOUR MARKINGHOT JUNCTION TYPES, WIRING CONFIGURATION AND COLOUR MARKINGTAB. 2
HOT JUNCTION TYPES
HOT JUNCTION CODE DESCRIPTION DRAWING
I1 Simplex insulated junction
Z1 Simplex grounded junction
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH 2-WIRE DESIGN
CZAH 2-WIRE DESIGN
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH POMIA
R
POMIAR
HOT JUNCTION TYPES, WIRING CONFIGURATION AND COLOUR MARKING
POMIAR
HOT JUNCTION TYPES, WIRING CONFIGURATION AND COLOUR MARKING
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
HOT JUNCTION TYPES
POMIAR
HOT JUNCTION TYPES
DESCRIPTION
POMIAR
DESCRIPTION
Simplex insulated junction
POMIAR
Simplex insulated junction
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
-50 ÷ +400Sp.
-50 ÷ +400
z z z z TOLERANCE VALUE **)z TOLERANCE VALUE **)
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
14. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
TYPES OF BAYONET CONNECTOR *) **)TYPES OF BAYONET CONNECTOR *) **)TAB. 3
PART NUMBER
BAYONET TYPE MATERIALSPRING
DIAMETERBAYONET END OF LENGTH 'L' DIAMETER
KP1 flat tip stainless steel Ø 6
L
Ø Ø 6
KS2 conical tip stainless steel Ø 6
L
Ø Ø 6
KK3 round tip stainless steel Ø 6
L
Ø Ø 6
KP4 flat tip stainless steel Ø 8
L
Ø Ø 8
KS5 conical tip stainless steel Ø 8
L
Ø Ø 8
KK6 round tip stainless steel Ø 8
LØ Ø 8
KP7 flat tip stainless steel Ø 8
L
Ø Ø 6
KS8 conical tip stainless steel Ø 8
L
Ø Ø 6
KK9 round tip stainless steel Ø 8
L
Ø Ø 6
*) other tip type available on request
**) LZ- standard length of the spring is 150 mm, other lengths available on request
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH flat tip
CZAH flat tip
KS8
CZAH KS8 conical tip
CZAH conical tip
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
stainless steel
POMIAR
stainless steel Ø
POMIAR
Ø 8
POMIAR
8
POMIAR
POMIAR
POMIAR S
p.
Sp.
Sp.
Sp.
LSp.
LSp.
Sp.
Sp. z z z z z z z Øz Ø
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
Øo.o.
Ø 6o.o.
6
15.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
TYPES OF BAYONET CONNETOR AND COMPRESSION FITTING *)TYPES OF BAYONET CONNETOR AND COMPRESSION FITTING *)TAB. 5
BAYONET CODE MATERIAL DIMENSIONSNUMBER OF
SLOTSDRAWING
B1 brass spring Ø 6 mm L - 20 mm, L2 - Ø 16 mm, L3 - Ø 12,3 mm 2
L
L3
L2
spring
B2 brass spring Ø 6 mm L - 20 mm, L2 - Ø 18 mm, L3 - Ø 14,2 mm 2
B3 brass spring Ø 8 mm L - 20 mm, L2 - Ø 18 mm, L3 - Ø 14,2 mm 2
B4 brass spring Ø 8 mm L - 20 mm, L2 - Ø 16 mm, L3 - Ø 12,3 mm 2
B5 stainless steel spring Ø 6 mm L - 18 mm, L2 - Ø 14 mm, L3 - Ø 12,2 mm 2
B6 stainless steel spring Ø 6 mm L - 18 mm, L2 - Ø 16,5 mm, L3 - Ø15,2 mm 2
B7 stainless steel spring Ø 8 mm L - 18 mm, L2 - Ø 15,5 mm, L3 - Ø 14,2 mm 2
B8 stainless steel spring Ø 8 mm L - 18 mm, L2 - Ø 14 mm, L3 - Ø 12,2 mm 2
*) other types of bayonet connector available on request
EXTENSION AND COMPENSATING CABLESEXTENSION AND COMPENSATING CABLESTAB. 4
Temperature sensors can be produced with cables of different designs. The following insulation types are available: PCV, PTFE, fiberglass, Kapton or combination of the mentioned materials. Cable sections are 0.22mm2 (7/0.2 mm). To choose the appropiate cable, please see table D, page 54.
The most common cables:TS201 - 2x0,22 mm2 – Silicone insulatedTW204 - 2x0,22 mm2 – fiberglass insulated / stainless steel overbraid TT201 - 2x0,22 mm2 – Teflon insulatedTT204 - 2x0,22 mm2 - Teflon insulated / stainless steel overbraidRW202 - 2x0,22 mm2 – fiberglass insulated / stainless steel overbraidRW203 - 2x0,22 mm2 - fiberglass insulated / stainless steel overbraid
COMPRESSION FITTING TYPE
MATERIALDIMENSIONS
DRAWINGL G L2
KM101 brass 23 M10 x 1 8
G
L
L 2
KM121 brass 25 M12 x 1 10
KM1215 brass 25 M12 x 1,5 10
KM141 brass 25 M14 x 1 10
KS101 stainless steel 23 M10 x 1 8
KS121 stainless steel 25 M12 x 1 10
KS1215 stainless steel 25 M12 x 1,5 10
KS141 stainless steel 25 M14 x 1 10
*) other types of bayonet connector on requestCZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH KS101
CZAH KS101 stainless steel
CZAH stainless steel
KS121
CZAH KS121
KS1215
CZAH KS1215
KS141
CZAH KS141
*) other types of bayonet connector on requestCZAH *) other types of bayonet connector on request
POMIAR
POMIAR
POMIAR
POMIAR 14 mm, L
POMIAR 14 mm, L3
POMIAR 3 -
POMIAR - Ø
POMIAR Ø 12,2 mm
POMIAR 12,2 mm
Ø
POMIAR Ø 6 mm
POMIAR 6 mm
16,5 mm, L
POMIAR
16,5 mm, L3
POMIAR
3 -
POMIAR
- Ø
POMIAR
Ø15,2 mm
POMIAR 15,2 mm
spring
POMIAR
spring Ø
POMIAR
Ø 8 mm
POMIAR
8 mmL - 18 mm, L
POMIAR
L - 18 mm, L2
POMIAR
2 -
POMIAR
- Ø
POMIAR
Ø 15,5 mm, L
POMIAR
15,5 mm, L3
POMIAR
3 -
POMIAR
- Ø
POMIAR
Ø 14,2 mm
POMIAR 14,2 mm
spring Ø 8 mm
POMIAR
spring Ø 8 mmL - 18 mm, L
POMIAR
L - 18 mm, L2
POMIAR
2 -
POMIAR
- Ø
POMIAR
Ø 14 mm, L
POMIAR
14 mm, L
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
DIMENSIONS
POMIAR
DIMENSIONS
L
POMIAR
L
brass
POMIAR
brass 23
POMIAR
23
brassPOMIAR
brass
brassPOMIAR
brass
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
2
Sp.
2
2
Sp.
2
2Sp.
2
2Sp.
2
z z z DRAWINGz DRAWINGo.
o.o.
o.o.
o.o.
o.
05 METAL SHEATHED THERMOCOUPLES
Calibration certificate of our Accredited Laboratory upon request CALIBRATION
CERTIFICATE
ORDERING CODE:ORDERING CODE:TAB.
� The sensors are manufactured with sheaths made of many different steel grades. Material depends on the appli-cation's requirements and the operating environment.
� Designed for high temperatures applications and tough environment, such as in furnaces, dryers, quenching pits, etc.
� With the appropiate sheath, thermocouples can be used at temperatures up to 1250 °C
� With the appropiate sheath, thermocouples are suitable for oxidising atmosphere applications.
� For very harsh operating conditions we can apply an inner ceramic sheath.
� Measuring inserts made of thermocouple wire
� Additionaly the temperature sensors can be equipped with a welded compression fitting, a flange or a moveable compression fitting.
� Also available in the angled version
05sensor type
accuracy class
sheath maerial
diameter length 'L'terminal head
typeceramic
thermowellway of fixing
temperature transmitter
give a type and a number of sensor; table 11K - single2K – double
Give accuracy class; table I, page 63
Give sheath material; table 2
give outer diameter, se table 3
Give length 'L' [mm] for straight sensor or L/L2 for angled sensor
Give terminal head type; table 4
Give ceramic type of an inner thermowell, see taqble 5 (skip in not requested)
Give type of additional assembling parts; table 6. For a thread, please specify its dimenstons [mm] from sensor tip to a thread L (PG) or to a hexagon L(PSK). For a flange DN20, please spefify L (DN) (skip if not requested)
Give temperature transmiter details; table 7 (skip in not requested)
05 – 1K – 1 – 310 – 21,3 – 1000 – NA – C799 – G34 700(PSK) – SEM206TC, 4 .. 20mA, 0 ... 1000 °C
Temperature sensor model 05 (thermocouple with a metal-ceramic thermowell). Type K, single (1K), class one "1", a steel tube grade 310 (H25N20S2) and diameter 21,3 mm, total length L=1000 mm. Sensor ended with a terminal head type NA. An additional inner ceramic sheath grade C799. Head with a transmitter SEM206TC 4 ... 20 mA for temperatur range 0 do 1000 °C. Sensor with a welded compression fitting G3/4", distance between tip and hexagon is 700 mm.
05 1K 1 310 21,3 1000 NA C799 G34 700(PSK)
SEM206TC, 4 ... 20 mA 0 ... 1000
°C
Metal sheath with measuring insert
Ceramic metal sheath with measuring insert
�
�
�
�
�
�
give a type and a number of sensor; table 11K - single2K – double
Give accuracy class; table I, page 63
Give sheath material; table 2
give outer diameter, se table 3
Give ceramic type of an inner thermowell, see taqble 5 (skip in not requested)
Give type of additional assembling parts; table 6. For a thread, please specify its dimenstons [mm] from sensor tip to a thread L (PG) or to a hexagon L(PSK). For a flange DN20, please spefify L (DN) (skip if not requested)
Give temperature transmiter details; table 7 (skip in not requested)
Metal sheath with measuring insert
L
L(PS
K)
L(PG
) L
L
Ø
Ø
L2
Ø
16. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH Ø
CZAH Ø
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Give accuracy class; table I,
POMIAR
Give accuracy class; table I,
Give sheath material; table 2
POMIAR
Give sheath material; table 2
give outer diameter, se table 3
POMIAR
give outer diameter, se table 3
Give length 'L' [mm] for straight sensor or L/L2 for angled sensor
POMIAR
Give length 'L' [mm] for straight sensor or L/L2 for angled sensor
Give terminal head type; table 4POMIAR
Give terminal head type; table 4POMIAR
POMIAR
POMIAR
POMIAR
give outer diameter, se table 3
POMIAR
give outer diameter, se table 3
Give length 'L' [mm] for straight sensor or L/L2 for angled sensor
POMIAR
Give length 'L' [mm] for straight sensor or L/L2 for angled sensor
Give terminal head type; table 4POMIAR
Give terminal head type; table 4POMIAR
POMIAR
POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
diameter Sp.
diameter length 'L'Sp.
length 'L'terminal head Sp.
terminal head
typeSp.
typeSp.
Sp. z Additionaly the temperature sensors can be equipped with a welded compression fitting, a flange or a moveable z Additionaly the temperature sensors can be equipped with a welded compression fitting, a flange or a moveable
o.o.
The sensors are manufactured with sheaths made of many different steel grades. Material depends on the appli
o.o.
The sensors are manufactured with sheaths made of many different steel grades. Material depends on the appli-
o.o.
-
Designed for high temperatures applications and tough environment, such as in furnaces, dryers, quenching pits,
o.o.Designed for high temperatures applications and tough environment, such as in furnaces, dryers, quenching pits,
With the appropiate sheath, thermocouples are suitable for oxidising atmosphere applications.o.o.
With the appropiate sheath, thermocouples are suitable for oxidising atmosphere applications.
GRADE DESCRIPTION
INC (Inconel 600;
2.4816)
Nickel-chrome-iron alloy characterized by great resistance to oxidising and high temperature (up to 1150°C)
310 (H25N20S2;
1.4841)
Steel containing 25%Cr – 20%Ni. It is stainless and heat resistant. Resi-stant to oxidising up to 1100°C.
KAN(KANTHALAF TM)
Kanthal – ferritic alloy for high temperature applications up to 1300°C. Recommended especially when resistance to oxidation and abration is
required.
321 (1.4541;
1H18N9T)
Steel similar to grade 304 (18% Cr, 10% Ni) but with titanium as a stabili-zer. Max. operating temperature in the air is 900 °C.
316 (1.4401;
H17N13M2T)
Steel similar to grade 304 (17% Cr, 9% Ni) with 3% of molybdenum. Becau-se this steel grade is more corrosion resistant than 321 and 304, it is good for humid environment and for aplications in places threatened by corrosion
(sea water).
*) other steel grades available on request
DIAMETERS W [mm]
10,0
11,0
12,0
14,0
15,0
21,3
22,0
*) other diameters available on request
SENSOR TYPE
THERMO--ELECTRODES
TYPE
OPERATIONG TEMPERA-
TURE RANGE (LONG TERM)
[°C] *)
OPERATIONG TEMPERATURE RANGE (SHOT TERM) [°C] *)
J Fe - CuNi +20 ÷ 700 -180 ÷ 750
T Cu - CuNi -185 ÷ 300 -250 ÷ 400
K NiCr - NiAl 0 ÷ 1100 -180 ÷ 1350
N NiCrSi - NiSiMg 0 ÷ 1100 -270 ÷ 1300
E NiCr - CuNi 0 ÷ 800 -40 ÷ 900
S PtRh10 - Pt 0 ÷ 1550 -50 ÷ 1750
R PtRh13 - Pt 0 ÷ 1600 -50 ÷ 1700
*) Temperature range depends on sheath material
TYPE MATERIAL DESCRIPTION
C799 99,7% Al2O3
Gas-tight ceramic type C799, trade name Alsint 99,7
C610 60% Al2O3
Gas-tight ceramic type C799, trade name Pythagoras
*) possibility of using the additional ceramic tube depends on the outer tube diameter
TYPE DESCRIPTION MATERIAL THREAD DRAWING **)
M2015Compression
fitting welded to the thermowell
*)Steel
M20x1.5
G12 G1/2’’
G10 G1.0’’
G34 G3/4’’
UZ 22 Mounting bracket D=22 mm **)
Aluminium alloy + steel n/d
UZ25 Mounting bracket D=25 mm **)
DN20Flange welded to the thermowell
**)Steel n/d
*) other threads on request **) see table G, page 62 for more information
THERMO-ELECTRODES TYPESTHERMO-ELECTRODES TYPESTAB. 1 STEEL SHEATH MATERIAL *)STEEL SHEATH MATERIAL *)TAB. 2
DIAMETER *)DIAMETER *)TAB. 3 INNER CERAMIC *)INNER CERAMIC *)TAB. 5
SPOSÓB MOCOWANIA CZUJNIKA SPOSÓB MOCOWANIA CZUJNIKA TAB. 6
If the signal tramsmitter inside a head is requested eg. for signal 4…20 mA, please provide all the necessary details, such as: transmitter type, temperature range. List of transmitters is available in the table E, page 60.
TEMPERATURE TRANSMITTERTEMPERATURE TRANSMITTERTAB. 7
TERMINAL HEAD *) **)
TYPE B NA
ø72 mm
72 mm
ø68,2 mm
73 mm
TYPE DA MA ***)
ø84 mm
90 mm
ø48,8 mm
52 mm
TYPE G1 G2
ø82 mm
87 mm
ø60 mm
64 mm
*) different connection heads available on request**) for technical data see table A, page 50***) MA head possible only for the max. thermowell diameter 12 mm.
TERMINAL HEAD TYPETERMINAL HEAD TYPETAB. 4
17.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH Compression
CZAH Compression fitting welded to
CZAH fitting welded to the thermowell
CZAH the thermowell *)
CZAH *)
Steel
CZAH Steel
UZ 22
CZAH UZ 22 Mounting bracket
CZAH Mounting bracket
D=22 mm **)
CZAH D=22 mm **)
UZ25CZAH
UZ25
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Gas-tight ceramic
POMIAR
Gas-tight ceramic type C799, trade
POMIAR
type C799, trade name Pythagoras
POMIAR
name Pythagoras
*) possibility of using the additional ceramic tube depends on the outer
POMIAR
*) possibility of using the additional ceramic tube depends on the outer
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
MATERIALPOMIAR
MATERIAL THREADPOMIAR
THREADPOMIAR
SPOSÓB MOCOWANIA CZUJNIKA
POMIAR
SPOSÓB MOCOWANIA CZUJNIKA
POMIAR
POMIAR
POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
TERMINAL HEAD *) **)Sp.
TERMINAL HEAD *) **)
TYPE Sp.
TYPE BSp.
BSp.
Sp.
Sp.
Sp.
Sp.
TERMINAL HEAD TYPE
Sp.
TERMINAL HEAD TYPE
Sp.
Sp.
Sp.
TERMINAL HEAD TYPE
Sp.
TERMINAL HEAD TYPE
Sp.
Sp. z z z
for humid environment and for aplications in places threatened by corrosion
z for humid environment and for aplications in places threatened by corrosion
(sea water). z (sea water). o.
o.o.
o.o.
o.o.
o.o.
o.Recommended especially when resistance to oxidation and abration is
o.o.Recommended especially when resistance to oxidation and abration is
Steel similar to grade 304 (18% Cr, 10% Ni) but with titanium as a stabili
o.o.Steel similar to grade 304 (18% Cr, 10% Ni) but with titanium as a stabili-
o.o.-
zer. Max. operating temperature in the air is 900 °C.o.o.zer. Max. operating temperature in the air is 900 °C.
Steel similar to grade 304 (17% Cr, 9% Ni) with 3% of molybdenum. Becauo.o.
Steel similar to grade 304 (17% Cr, 9% Ni) with 3% of molybdenum. Because this steel grade is more corrosion resistant than 321 and 304, it is good o.
o.se this steel grade is more corrosion resistant than 321 and 304, it is good for humid environment and for aplications in places threatened by corrosion o.
o.for humid environment and for aplications in places threatened by corrosion
Calibration certificate of our Accredited Laboratory upon request CALIBRATION
CERTIFICATE
type and number of sensor (table 1)1K - simplex2K – dupex
06 – 1S – 1 – 22 – C799 – 150/450 – C799 – DA – 0,5 – SEM206TC 4 ... 20mA 0...1200°
Temperature sensor model 06 (ceramic sheathed thermocouple). Simplex, type S (PtRh10-Pt), class one '1', double ceramic protection tube with outer diameter 22.0 mm. Support tube length: 150 mm, the exposed part of ceramic tube length 450 mm, Aluminum head type DA. Thermo-electrods with diameter 0,5 mm. Thermocouple equipped with the temperature transmitter SEM206TC 4 ... 20mA for temperature range 0 do 1200 °C.
06sensor type
acuracy class
ceramic sheath
ceramic material
length (LR/LC) [mm]
inner sheath
materialhead type
thermo--electrodes
diameterfixing
temperature transmitter
Give accuracy class; table I, page 63
Give diameter Ø of the outer tube; table 2
Give ceramic type; table 3
Give support tube length and ceramic probe length [mm] (LR / LC), for the straight thermocouple or (LR / LC / L2) for the angled thermocouple
Give the inner ceramic sheah material; table 3 (skip if not requested)
Give head type; table 4
Give thermo-electrodes diameter
Give a code of the additional fixing; table 6 (skip if not requested)
Give temperature transmitter parameters; table 7 (skip if not requested)
ORDERING CODE:ORDERING CODE:TAB.
� Ceramic sheathed thermocouples are used in furnaces, dryers, fumes canals, etc.
� With the appropiate sheath, thermocouples are suitable for use up to 1600 °C
� To suit the application, thermocouples can be supplied with a single or double ceramic sheath
� Can be calibrated in the Accredited Laboratory
� Thermocouples can suppied complete with additional compression fittings or flanges
� Thermocouples are available in angle version
CERAMIC SHEATHED THERMOCOUPLES06
06 1S 1 22 C799 150/450 C799 DA 0,5 -SEM206TC 4 ... 20 mA 0 ...1200 °C
Ø
LCLR
LCLR
L2
Ø
18. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH Ø
CZAH Ø
CZAH
CZAH
CZAH
CZAH
CZAH POMIA
R
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
of the outer tube;
POMIAR
of the outer tube;
Give ceramic type; table 3
POMIAR
Give ceramic type; table 3
Give support tube length and ceramic probe length [mm] (LR /
POMIAR
Give support tube length and ceramic probe length [mm] (LR / LC), for the straight thermocouple or (LR / LC / L2) for the angled
POMIAR
LC), for the straight thermocouple or (LR / LC / L2) for the angled thermocouple
POMIAR
thermocouple
Give the inner ceramic sheah material; table 3 (skip if not requested)
POMIAR
Give the inner ceramic sheah material; table 3 (skip if not requested)
Give head type; table 4POMIAR
Give head type; table 4POMIAR
POMIAR
POMIAR
LC
POMIAR
LC
POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
length (LR/
Sp.
length (LR/LC) [mm]
Sp.
LC) [mm]
inner
Sp. inner
sheath
Sp.
sheath material
Sp.
materialhead type
Sp.
head type -electrodes
Sp.
-electrodes
Sp.
Sp.
Sp.
Sp.
Sp. z
o.o.
CERAMIC TUBE DIAMETER [mm]
ASSEMBLING TUBE DIA-METER **) [mm]
6.00 10.0
8.00 12.0
10.0 15.0
12.0 15.0
15.0 21.3
22.0 30.0
24.0 30.0
*) other ceramic tubes diameters abailable on request **) assembling tube length depends on the length of the complete thermocouples, eg.:LR=150 mm for ceramic 1000 mm longLR=300 mm for ceramiki 1000 mm - 1600 mm longLR=500 mm for ceramic longer than 1600 mm
SENSOR TYPETHERMO-
ELECTRODES TYPE
OPERATIONG TEM-PERATURE RANGE
(LONG TERM) [°C] *)
OPERATIONG TEMPE-RATURE RANGE (SHOT
TERM) [°C] *)
J Fe - CuNi +20 ÷ 700 -180 ÷ 750
T Cu - CuNi -185 ÷ 300 -250 ÷ 400
K NiCr - NiAl 0 ÷ 1100 -180 ÷ 1350
N NiCrSi - NiSiMg 0 ÷ 1100 -270 ÷ 1300
E NiCr - CuNi 0 ÷ 800 -40 ÷ 900
S PtRh10 - Pt 0 ÷ 1550 -50 ÷ 1750
R PtRh13 - Pt 0 ÷ 1600 -50 ÷ 1700
B PtRh30 - PtRh6 0 ÷ 1600 -50 ÷ 1700
*) Given temperature ranges are mostly dependent on the outer thermowell material. Tolerance to PN-EN 60584-1, table I, page 63
TYPE MATERIAL DESCRIPTION
C799 99,7% Al2O3
Gas-tight ceramic type C799,
trade name Alsint 99,7
C610 **) 60% Al2O3
Gas-tight ceramic type C799,
trade name Pythagoras
*) possibility of using the additional ceramic tube depends on the outer tube diameter**) available only on request
TYPE DESCRIPTION MATERIAL THREAD DRAWING
M2015
Compression fitting
welded to the fixing tube
**)
stal
M20x1.5
G12 G1/2’’
G10 G1.0’’
G34 G3/4’’
DN20Flange welded
to the fixing tube ***)
stal n/d
*) additional fixing can be applied after using the suitable fixing tube diameter **) fitting is welded to the end of the fixing tube (next to the ceramic part), different distance is available on request***) specific dimensions acc. Table G, page 62.
If the in-head signal tramsmitter is requested eg. signal 4…20 mA, please give all the necessary details, such as: type, temperature range. List of transmitters is available in the table E, page 60.
TERMINAL HEAD *) **)
TYPE B NA DA
ø72 mm
72 mm
ø68,2 mm
73 mm
ø84 mm
90 mm
TYPE MA ***) G1 G2
ø48,8 mm
52 mm
ø82 mm
87 mm
ø60 mm
64 mm
*) different connection heads available on request **) for technical data see table A, page 50TYPE DIAMETERS *) [mm]
J, K, N 3,0
J, K, N 2,0
J, K, N 1,0
J, K, N 0,8
J, K, N, R, S, B 0,5
J, K, N, R, S, B 0,35
*) other diameters available on request
TEMPERATUR TRANSMITTERTEMPERATUR TRANSMITTERTAB. 7
FIXING *)FIXING *)TAB. 6
TERMINAL HEAD TYPETERMINAL HEAD TYPETAB. 4
THERMO-ELECTRODES TYPESTHERMO-ELECTRODES TYPESTAB. 1
CERAMIC MATERIAL *)CERAMIC MATERIAL *)TAB. 3
THERMO-ELECTRODES DIAMETERS *)THERMO-ELECTRODES DIAMETERS *)TAB. 5
OUTER TUBE DIAMETER *)OUTER TUBE DIAMETER *)TAB. 2
19.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH J, K, N
CZAH J, K, N
J, K, N
CZAH J, K, N
J, K, N, R, S, B
CZAH J, K, N, R, S, B
J, K, N, R, S, BCZAH J, K, N, R, S, B
*) other diameters available on requestCZAH
*) other diameters available on requestCZAH POMIA
R
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR 72 m
m
POMIAR 72 m
m
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
MA ***)
POMIAR
MA ***)
ø48,8 mm
POMIAR
ø48,8 mm
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
DIAMETERS *) [
POMIAR
DIAMETERS *) [mm
POMIAR
mm]
POMIAR
]
3,0POMIAR
3,0POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp. TERMINAL HEAD *) **)
Sp. TERMINAL HEAD *) **)
NA
Sp.
NA
Sp.
Sp.
Sp.
ø68,2 mmSp.
ø68,2 mmSp.
Sp.
Sp.
Sp. z z z
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
**) assembling tube length depends on the length of the complete thermocouples, eg.:o.o.
**) assembling tube length depends on the length of the complete thermocouples, eg.:
Give temperature transmitter details, see table 7 (skip if not requested)
Give a type of additional assembling parts, see table 6. For a thread, please specify its dimenstons [mm] from sensor tip to a thread L (PG) or to a hexagon L(PSK). For a flange DN20, please specify L (DN) (skip if not requested)
Give insert type W: changeable version:, S: not moveable ( possibility of moveable insert application depends on the sensor diameter)
07 – Pt100 – A – 4 – 321 – 10 – 345 – B – W – G12 200(PSK) – 250° C
Temperatur sensor type 07 (resistance thermometer, metal sheathed), type Pt100, class A, 4-wire version, thermo-well material: steel 321 (1H18N9T), thermowell diameter 10 mm, total length L=345 mm, length benaeth the hex fitting L (PSK)= 200 mm. Sensor with the head type B, the changeable measuring insert, welded fitting with thread G12. Max. operating temperature is 250 °C
ORDERING CODE:ORDERING CODE:TAB.
� Probe sheaths are available in a wide range of steel grades to suit various operating environments.
� Depending of sensor type and a certain construction, RTD can work even up to 850 °C.
� With the appropriate probe sheath the sensor is suitable for oxidising, reducing, neutral and full sour gases atmosphere.
� Can be produced with the changeable insert
� The sensors can be calibrated in the Accredited Laboratory
07measurung
element type
accu-racy class
wiring configura-
tion
sheath material
sheath diameter
lengthhead type
measu-ring insert
typefixing
head transmitter
max. operating
temperature
Pt100, 2xPt100, Pt500, 2xPt500, Pt1000, 2xPt1000
Give accuracy class, table 1
Give wiring configuration, table 2
Give sheath type, table 3
Give sheath diameter, table 4
Give length L [mm]
Give head type, table 5
Give max. operating temperature for the sensor tip
07 Pt 100 A 4 321 10 345 B W G12 200(PSK) – 250 °C
L
Ø
L (P
SK)
L (P
G)
L
Ø
Calibration certificate of our Accredited Laboratory upon request CALIBRATION
CERTIFICATE
METAL SHEATHED RESISTANCE THERMOMETERS07
20. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
L (P
G)
CZAH
L (P
G)
CZAH
CZAH
CZAH
CZAH
L (P
SK)
CZAH
L (P
SK)
CZAH
CZAH
CZAH
CZAH Ø
CZAH Ø
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH POMIA
R
POMIAR
Give insert type W: changeable version:, S: not moveable ( possibility of moveable insert POMIAR
Give insert type W: changeable version:, S: not moveable ( possibility of moveable insert application depends on the sensor diameter)POMIA
R
application depends on the sensor diameter)POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Give accuracy class, table 1
POMIAR
Give accuracy class, table 1
Give wiring configuration, table 2
POMIAR
Give wiring configuration, table 2
Give sheath type, table 3
POMIAR
Give sheath type, table 3
Give sheath diameter, table 4
POMIAR
Give sheath diameter, table 4
Give length L [mm]
POMIAR
Give length L [mm]
Give head type, table 5
POMIAR
Give head type, table 5
POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
sheath
Sp.
sheath diameter
Sp.
diameterlength
Sp.
lengthhead
Sp.
head type
Sp.
type
measu
Sp.
measu-
Sp.
-ring insert
Sp.
ring insert typeSp.
typeSp.
Sp.
Sp.
Sp.
Sp.
Sp. z
o.o.With the appropriate probe sheath the sensor is suitable for oxidising, reducing, neutral and full sour gases
o.o.With the appropriate probe sheath the sensor is suitable for oxidising, reducing, neutral and full sour gases
TRANSMITTER TOLERANCE CLASS AND OPERATING TEMPERATURES *)TRANSMITTER TOLERANCE CLASS AND OPERATING TEMPERATURES *)TAB. 1
TOLERANCE CLASS FOR WIRE WOUND RESISTORS FOR THIN FILM RESISTORS TOLERANCE VALUE **)
AA -50 ÷ +250 0 ÷ +150 ± ( 0.1+0.0017 I t I )
A -100 ÷ +450 -30 ÷ +300 ± ( 0.15+0.002 I t I )
B -196 ÷ +660 -50 ÷ +500 ± ( 0.3+0.005 I t I )
C -196 ÷ +660 -50 ÷ +600 ± ( 0.6+0.01 I t I )
*) to PN-EN60751:2009 **) I t I = temperature in °C no matter what unit (absolute value)
SIINGLE (ONE RESISTOR)
2-WIRE DESIGN 3-WIRE DESIGN 4-WIRE DESIGN
white
red
white
redred
whitewhite
redred
DOUBLE (2 RESISTORS)
2-WIRE DESIGN 3-WIRE DESIGN 4-WIRE DESIGN
white
red
yellow
black
white
redred
black
yellowyellow
whitewhite
redred
blackblack
yellowyellow
WIRING CONFIGURATION AND COLOUR MARKINGWIRING CONFIGURATION AND COLOUR MARKINGTAB. 2
TYPE DESCRIPTION
INC (Inconel 600; 2.4816) Nickel-chrome-iron alloy characterized by great resistance to oxidising and high temperature
310 (H25N20S2; 1.4841) Steel containing 25%Cr – 20%Ni. It is stainless and heat resistant
304 (1.4301; 0H18N9)
Austentic stainles steel 18%Cr-8%Ni. Corrosion resistant (with no excess oxidation and no resistance lost) up to 80 800 °C. It is the most popular acidproof material, easy for metalworking and welding
321 (1.4541; 1H18N9T) Steel similar to grade 304 (18% Cr, 10% Ni) but with titanium as a stabilizer.
316 (1.4401; H17N13M2T)
Steel similar to 304 (17% Cr, 9% Ni) with 3% of molybdenum. Because this steel grade is more corrosion resistant than 321 and 304, it is good for humid environment and for aplications in places threatened by corrosion (sea water).
*) other steel types available on request
STEEL SHEATH MATERIAL *)STEEL SHEATH MATERIAL *)TAB. 3
21.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH INC
CZAH INC
(Inconel 600; 2.4816)
CZAH (Inconel 600; 2.4816)
310
CZAH 310
(H25N20S2; 1.4841)
CZAH (H25N20S2; 1.4841)
CZAH POMIA
R
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR DOUBLE (2 RESISTORS)
POMIAR DOUBLE (2 RESISTORS)
3-WIRE DESIGN
POMIAR
3-WIRE DESIGN
POMIAR
POMIAR
red
POMIAR
red
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
STEEL SHEATH MATERIAL *)POMIAR
STEEL SHEATH MATERIAL *)
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. z z z 4-WIRE DESIGNz 4-WIRE DESIGN
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
TERMINAL HEAD TYPESTERMINAL HEAD TYPESTAB. 5
CODE DESCRIPTION MATERIAL THREAD DRAWING **)
M2015
Fitting welded to the thermo-well *) steel
M20x1.5
G12 G1/2’’
G10 G1.0’’
G34 G3/4’’
UZ 22 Mounting bracket D=22 mm **)
Aluminium+steel alloy n/d
UZ25 Mounting bracketD=25 mm **)
DN20 Flange welded to the thermowell **) steel n/d
*) other threads on request **) see table G, page 62 for more information
FIXINGFIXINGTAB. 6
If the in-head signal tramsmitter is requested eg. signal 4…20 mA, please give all the necessary details, such as: type, temperature range. List of transmitters is available in the table E, page 60.
TEMPERATURE TRANSMITTERTEMPERATURE TRANSMITTERTAB. 7
OUTER THERMOWELL DIAMETER [mm] *)
4,0
5,0
6,0
8,0
10,0
12,0
15,0
*) other diameters available on request
DIAMETERDIAMETERTAB. 4
TERMINAL HEAD *) **)
TYPE B NA MA ***)
ø72 mm
72 mm
ø68,2 mm
73 mm
ø48,8 mm
52 mm
TYPE DA G1 G2
ø84 mm90 m
mø82 mm
87 mm
ø60 mm
64 mm
*) other heads available on request**) for technical data see table A, page 50***) MA head possible only for thermowells with max. diameter 12 mm.
22. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH Mounting bracket
CZAH Mounting bracketD=25 mm **)
CZAH D=25 mm **)
DN20
CZAH DN20 Flange welded to the
CZAH Flange welded to the
*) other threads on request **) see table G, page 62 for more informationCZAH
*) other threads on request **) see table G, page 62 for more informationCZAH POMIA
R
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
THREAD
POMIAR
THREAD
steel
POMIAR
steel
M20x1.5
POMIAR
M20x1.5
Mounting bracket
POMIAR
Mounting bracket D=22 mm **) POMIA
R
D=22 mm **) POMIAR S
p.
Sp.
Sp.
Sp. 87 mm
Sp. 87 mm
Sp.
Sp.
Sp.
Sp.
Sp.
***) MA head possible only for thermowells with max. diameter 12 mm.Sp.
***) MA head possible only for thermowells with max. diameter 12 mm.
z z z z o.o
.o.
o.o.
o.o.
o.
52 mm
o.o.
52 mm
o.o.
o.o.
o.o.
o.o.
o.o.
G2o.o.
G2o.o.
ø60 mmo.o.
ø60 mm
CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
Give the measuring tip code, table 7
Give fitting code, table 6 (skip if not requested)
Give cable type, table 5
08 – Pt100 – A – 4 – 321 – 10 – 250/50(PG) – 2000 – RT401 – M12 – KK – 250° C
Temperature sensor model esistance thermometer with ?) Type Pt100, class A, 4-wire configuartion, sheath ma-terial 321 (1H18N9T), sheath diameter 10 mm, total length L=250 mm. Length beneath the fitting L(PG) 50 mm. Temperature sensor with the welded compression fitting with thread M12. Round measuring tip. Max. operating temperature 250° C.
ORDERING CODE:ORDERING CODE:TAB.
� Probe sheaths are available in a wide range of steel grades to suit various operating environments.
� Depending on the sensor type and a construction, they can measure the temperature up to 400 °C max.
� With the appropriate sheath material, sensors are suitable for use in oxidising and reducing atmospheres and neutral acid, alkali,salts, etc.
� There are two options available: a protection tube or a tube with a welded fitting
� Thermocouples can be calibrated in the Accredited Laboratory
08sensor type
accuracy class
wiring con-figuration or junction
type
sheath material
sheath diameter
lengthcable length
cable type
com-pression
fitting
type of the measuring
tip
max. operating
temperature
Pt1002xPt100Pt5002xPt500 Pt10002xPt1000 or K, J, T
Give accuracy class, table 1
Give wiring configuration or junction type, table 2
Give sheath material, table 3
Give sheath diameter, table 4
Give length Lc [mm] or Lc/L(PG) for option with fitting
Give cable length [mm]
Give max .operating temperature of a tip
Lc
Ø
L (P
SK)
L (P
G)
Lc
Lp
Lp
Ø
Calibration certificate of our Accredited Laboratory upon request CALIBRATION
CERTIFICATEMETAL SHEATHED CABLE RESISTANCE THERMOMETERS AND CABLE THERMOCOUPLES
08
08 Pt 100 A 4 321 10 250/50(PG) 2000 RT401 M12 KK 250° C
23.CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH ØCZAH Ø
L (P
SK)
CZAH
L (P
SK)
Lc
CZAH
Lc
POMIAR
POMIAR
Give cable type, table 5POMIAR
Give cable type, table 5POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Give wiring configuration or junction type,
POMIAR
Give wiring configuration or junction type,
Give sheath material, table 3
POMIAR
Give sheath material, table 3
Give sheath diameter, table 4
POMIAR
Give sheath diameter, table 4
Give length Lc [mm] or Lc/L(PG) for option with fitting
POMIAR
Give length Lc [mm] or Lc/L(PG) for option with fitting
Give cable length [mm]
POMIAR
Give cable length [mm]
POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. length
Sp. length
cable
Sp. cable
length
Sp. length
cable
Sp. cable
type
Sp. type
Sp.
Sp.
Sp.
Sp.
Sp. z z z z
o.o.Depending on the sensor type and a construction, they can measure the temperature up to 400 °C max.
o.o.Depending on the sensor type and a construction, they can measure the temperature up to 400 °C max.
With the appropriate sheath material, sensors are suitable for use in oxidising and reducing atmospheres and o.o.
With the appropriate sheath material, sensors are suitable for use in oxidising and reducing atmospheres and
CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
RESISTOR TOLERANCE CLASS AND OPERATING TEMP. RANGE *)RESISTOR TOLERANCE CLASS AND OPERATING TEMP. RANGE *)TAB. 1
TOLERANCE CLASS FOR WIRE WOUND RESISTORS FOR THIN FILM RESISTORS TOLERANCE VALUE **)
AA -50 ÷ +250 0 ÷ +150 ± ( 0.1+0.0017 I t I )
A -100 ÷ +400 -30 ÷ +300 ± ( 0.15+0.002 I t I )
B -196 ÷ +400 -50 ÷ +400 ± ( 0.3+0.005 I t I )
C -196 ÷ +400 -50 ÷ +400 ± ( 0.6+0.01 I t I )
*) to PN-EN60751:2009 **) I t I = temperature in °C no matter what unit (absolute value)
SIINGLE (ONE RESISTOR)
2-WIRE DESIGN 3-WIRE DESIGN 4-WIRE DESIGN
white
red
white
redred
whitewhite
redred
DOUBLE (2 RESISTORS)
2-WIRE DESIGN 3-WIRE DESIGN 4-WIRE DESIGN
white
red
yellow
black
white
redred
black
yellowyellow
whitewhite
redred
blackblack
yellowyellow
WIRING CONFIGURATION AND COLOUR MARKINGWIRING CONFIGURATION AND COLOUR MARKINGTAB. 2
TEMPERATURE RANGE FOR THERMOCOUPLES *)
SENSOR TYPE THERMO-ELDTRODES TYPE LONG TERM OPERATING RANGE [°C] *) SHOT TERM OPERATING RANGE [°C] *)
J Fe - CuNi +20 ÷ 400 -180 ÷ 400
T Cu - CuNi -185 ÷ 300 -250 ÷ 400
K NiCr - NiAl 0 ÷ 400 -180 ÷ 400
*) Given temperature ranges are mostly dependent on the type of wire and thermowell. Tolerance to PN-EN 60584-1; table I, page 63
HOT JUNCTION TYPES
HOT JUNCTION CODE DESCRIPTION DRAWING
I1 Simplex insulated junction
Z1 Simplex grounded junction
24. CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH black
CZAH black
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH HOT JUNCTION CODECZAH HOT JUNCTION CODE
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR SIINGLE (ONE RESISTOR)
POMIAR SIINGLE (ONE RESISTOR)
3-WIRE DESIGN
POMIAR
3-WIRE DESIGN
POMIAR
POMIAR
red
POMIAR
red
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
DOUBLE (2 RESISTORS)
POMIAR
DOUBLE (2 RESISTORS)
POMIAR
red POMIAR
red POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. z z z z
-180 ÷ 400z -180 ÷ 400
-250 ÷ 400z -250 ÷ 400
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
SHOT TERM OPERATING RANGE [°C] *)o.o.
SHOT TERM OPERATING RANGE [°C] *)
CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
The sensors can be supplied complete with cables of various design. The following insulation types are available: PCV, PTFE, fiberglass, Kapton or combination of the mentioned mate-rials. Standards cable sections are 0.22mm2 (7/0.2 mm). To choose the right cable, please see table D, page 54. If you required a cable not mentioned in the catalogue, please contact the sales department.
The most common RTD cables: � RS301 - 3x0,22 mm2 – silicone insulated / 3 wires � RS401 - 4x0,22 mm2 – silicone insulated/ 4 wired � RW301 - 3x0,22 mm2 – fiberglass insulated / steel overbraid, 3 wires � RW401 - 4x0,22 mm2 – fiberglass insulated / steel overbraid, 4 wires
The most common thermocouple cables: � TS201 - 2x0,22 mm2 – silicone insulated � TW204 - 2x0,22 mm2 – fiberglass insulated / stainless steel overbraid � TT201 - 2x0,22 mm2 – Teflon insulated/ stainless steel overbraid
CABLESCABLESTAB. 5
TYPE DESCRIPTION MATERIAL THREAD DRAWING
M8
Fitting welded to a thermowell Ø10 mm steel
M8
M10 M10
M101 M10x1
M12 M12
*) other threads on request
COMPRESSION FITTINGCOMPRESSION FITTINGTAB. 6
TYPE DRAWING DESCRIPTION
KK **Ø
L
closed round
KPØ
L
open, perforated, for applications in gasous atmospheres
KSØ
L
conelike
KIØ
L
needlelike
*) tip shape depends on the tube **) flat tip available on requst
MEASURING TIP OPTIONS *)MEASURING TIP OPTIONS *)TAB. 7
OUTER THERMOWELL DIAMETER W [mm] *)
4,0
5,0
6,0
8,0
10,0
*) other diameters available on request
DIAMETERDIAMETERTAB. 4
TYPE DESCRIPTION
304 (1.4301; 0H18N9)
Austentic stainles steel 18%Cr-8%Ni. Corrosion resistant (with no excess oxidation and no resistance lost) up to 800 °C. It is the most popular acidproof material, easy for metalworking
and welding.
321 (1.4541; 1H18N9T) Steel similar to grade 304 (18% Cr, 10% Ni) but with titanium as a stabilizer.
316 (1.4401; H17N13M2T)
Steel similar to 304 (17% Cr, 9% Ni) with 3% of molybdenum. Because this steel grade is more corrosion resistant than 321 and 304, it is good for humid environment and for aplication in places
threatened by corrosion (sea water).
*) other material on request
STEEL SHEATH MATERIAL *)STEEL SHEATH MATERIAL *)TAB. 3
25.CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH KK **
CZAH KK **
CZAH KP
CZAH KP
CZAH MEASURING TIP OPTIONS *)
CZAH MEASURING TIP OPTIONS *)POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
THREAD
POMIAR
THREAD
steel
POMIAR
steel
M8
POMIAR
M8
POMIAR
POMIAR
MEASURING TIP OPTIONS *)POMIAR
MEASURING TIP OPTIONS *)
Sp.
Sp. The most common thermocouple cables:
Sp. The most common thermocouple cables:
– silicone insulated
Sp. – silicone insulated
– fiberglass insulated / stainless steel overbraid
Sp.
– fiberglass insulated / stainless steel overbraid – Teflon insulated/ stainless steel overbraid
Sp.
– Teflon insulated/ stainless steel overbraid
Sp.
Sp. z z
The sensors can be supplied complete with cables of various design. The following insulation types are available: PCV, PTFE, fiberglass, Kapton or combination of the mentioned matez The sensors can be supplied complete with cables of various design. The following insulation types are available: PCV, PTFE, fiberglass, Kapton or combination of the mentioned mate (7/0.2 mm). To choose the right cable, please see table D, page 54. If you required a cable not mentioned in the catalogue, please contact z (7/0.2 mm). To choose the right cable, please see table D, page 54. If you required a cable not mentioned in the catalogue, please contact z o
.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.*) other diameters available on request
o.o.*) other diameters available on request
09 – A – 321 – G1/2 – G1/2 – 100 – 10 – 7
Thermowell type 09 model A, steel grade 321(1H8N9T) , outside and inside thread G1/2, length L= 100 mm, OD=10 mm, ID=7 mm.
ORDERING CODE:ORDERING CODE:TAB.
� Thermowells are designed to protect the temperature sensor by isolating it from the measured medium.
� They are available with various lengths, diameters and threads
� Thermowells can be provided as individual components or together with temperature sensors
� Temperature sensors can be screwed directly to the thermowell or installed by using a moveable pipe fittings, table F, page 61, see the photo on the right.
09thermowell
typethermowell
materialthread thread length
outer diameter
inner diameter
Give thermowell type, table 1
Give thermowell material, table 2
Give outside thread type, table 3
Give inside thread type, table 3 write '0' for the thermowell without a thread (09B)
Give length L [mm], table 1
Give outside diameter Ø, table 4
Give inside diameter Ø, table 4
09 A 321 G1/2 G1/2 100 10 7
Ø
L
Ø
L
Gz
Gz
MOUNTING THERMOWELLS FOR THERMOCOUPLES AND RESISTANCE THERMOMETERS
09
*) sample thermowell with the compression fitting
*)
09A
09B
26. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH Ø
CZAH Ø
CZAH
*) sample thermowell with the compression fittingCZAH
*) sample thermowell with the compression fitting
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Give thermowell material, table 2
POMIAR
Give thermowell material, table 2
Give outside thread type, table 3
POMIAR
Give outside thread type, table 3
Give inside thread type, table 3 write '0' for the thermowell
POMIAR
Give inside thread type, table 3 write '0' for the thermowell without a thread (09B)
POMIAR
without a thread (09B)
Give length L [mm], table 1
POMIAR
Give length L [mm], table 1
Give outside diameter
POMIAR
Give outside diameter
Give inside diameter
POMIAR
Give inside diameter
POMIAR
POMIAR
Gz
POMIAR
Gz
POMIAR
POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
thread
Sp.
thread length
Sp.
length
Sp.
Sp. z
Temperature sensors can be screwed directly to the thermowell or installed by using a moveable pipe fittings,
z Temperature sensors can be screwed directly to the thermowell or installed by using a moveable pipe fittings, o.
o.Thermowells are designed to protect the temperature sensor by isolating it from the measured medium.
o.o.Thermowells are designed to protect the temperature sensor by isolating it from the measured medium.
Thermowells can be provided as individual components or together with temperature sensorso.o.
Thermowells can be provided as individual components or together with temperature sensors
Temperature sensors can be screwed directly to the thermowell or installed by using a moveable pipe fittings, o.o.
Temperature sensors can be screwed directly to the thermowell or installed by using a moveable pipe fittings,
STEEL GRADE *) DESCRIPTIONMAX. OPERATING TEMPERATURE °C
IN THE AIR
Corrosion resistant steel (acid-proof)321
(1H18N9T; 1.4541)
It provides excellent resistance to corrosion, natural water (including sea water), alkaline solutions, some organic and inorganic acids, soline of various concentration and temperature except high concentrated sodium chloride, sulphates, chlorates etc. Steel
resistant to all edible products.
800
310(H25N20S2; 1.4841)
Steel resistant to corrosion (heatproof) but with low resistance to gases containing sulphur. 1100
*)other steel grades on requst
OUTSIDE THREADGZ
INSIDE THREADGW
M10 x 1 M10 x 1
M12 x 1,5 M12 x 1,5
M14 x 1,5 M14 x 1,5
M16 x 1,5 M16 x 1,5
M20 x 1,5 M20 x 1,5
G ½ ’’ G½’’
½’’ NPT G½’’
*) - other thread types available on request
THREAD TYPE *)THREAD TYPE *)TAB. 3
THERMOWELL MATERIALTHERMOWELL MATERIALTAB. 2
THERMOWELL OUTSIDE DIAMETER Ø [mm]
THERMOWELL INSIDE DIAMETER Ø[mm]
6 4
6 5
8 6
9 **) 7
10 7
12 **) 9
15 11
*) - other diameters available on request **) only 321 (1H18N9T)
THERMOWELL DIAMETER *)THERMOWELL DIAMETER *)TAB. 4
TYPE DESCRIPTION *) DRAWING
AStraight metal thermowell with the pipe welded to
the fitting with outside threadLength L=50...1000mm
BStraight metal thermowell with the pipe welded to
the fitting. Fitting with the fixing screwLength L=50...1000mm
*) other thermowell types available on request
THERMOWELL TYPESTHERMOWELL TYPESTAB. 1
27.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH OUTSIDE THREAD
CZAH OUTSIDE THREADGZ
CZAH GZ
M10 x 1
CZAH M10 x 1
M12 x 1,5
CZAH M12 x 1,5
M14 x 1,5
CZAH M14 x 1,5
CZAH THREAD TYPE *)
CZAH THREAD TYPE *) POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR DESCRIPTION
POMIAR DESCRIPTION
It provides excellent resistance to corrosion, natural water (including sea water),
POMIAR
It provides excellent resistance to corrosion, natural water (including sea water), alkaline solutions, some organic and inorganic acids, soline of various concentration and
POMIAR
alkaline solutions, some organic and inorganic acids, soline of various concentration and temperature except high concentrated sodium chloride, sulphates, chlorates etc. Steel
POMIAR
temperature except high concentrated sodium chloride, sulphates, chlorates etc. Steel resistant to all edible products.
POMIAR
resistant to all edible products.
Steel resistant to corrosion (heatproof) but with low resistance to gases containing
POMIAR
Steel resistant to corrosion (heatproof) but with low resistance to gases containing
POMIAR
POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. z z z z z z z z z z z z z z z
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
Calibration certificate of our Accredited Laboratory upon request CALIBRATION
CERTIFICATE
TESTING RESISTANCE THERMOMETERS SSPRT10Testing resistance thermometers are industrial RTDs with high accuracy and stability. They are intended for indu-strial and laboratory apllications. Thanks to their design (tight thermowell with a plastic hand) they can be used in dry environment as well as in baths.
Main advantages:
� High measuring stability
� Wide operating temperature range
� High quality Platinum wires
MODEL
TEMPERATURE RANGE
ØA L1 ØB L2 LP L3
°C mm mm mm mm mm mm
10–001 -80 ÷ 670 6 500 19 100 2000 25
10–002 -100 ÷ 450 6 500 19 100 2000 25
CONSTRUCTION TYPECONSTRUCTION TYPETAB.
Termination options: Lead wire can be ended with the insulated bare ends ready for being assembled to a connector or directly to a measuring device. Banana connectors available on request.
R0: 100 Ω ± 0,05 Ω
coefficient α : 0,003850 +/- 0,000005
According to standard: PN-EN 60751:2009
Stability: 0,01 Ω/ year
Recommended current flow: 1 mA
The self-heating effect with current 1 mA: less than 0,004 °C
Calibration: Temperature sensors are supplied with the calibraction certificate of the Accredited Laboratory.
Assembling: 4-wire
Max. operationg temperature of the hand: 80 °C
DATASHEETDATASHEETTAB.
How to order: please specify the type 10-001 or 10-002
L1L3
ØA
ORDERING CODE:ORDERING CODE:TAB.
L1L2
Lp
ØA
ØB
28. CZAH
CZAH
CZAH
CZAH
CZAH
CZAH POMIA
R
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
-100
POMIAR
-100 ÷
POMIAR
÷ 450
POMIAR
450 6
POMIAR
6
Termination options: Lead wire can be ended with the insulated bare ends ready for being assembled to a connector
POMIAR
Termination options: Lead wire can be ended with the insulated bare ends ready for being assembled to a connector or directly to a measuring device. Banana connectors available on request.
POMIAR
or directly to a measuring device. Banana connectors available on request.
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
DATASHEET
POMIAR
DATASHEET
POMIAR
POMIAR
POMIAR
POMIAR
DATASHEET
POMIAR
DATASHEET
POMIAR
POMIAR
POMIAR
TAB.
POMIAR
TAB.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
L1
Sp.
L1 Ø
Sp.
ØB
Sp.
B
mm Sp.
mm mmSp.
mm mmSp.
mm
500Sp.
500Sp. z z
o.o.
Testing resistance thermometers are industrial RTDs with high accuracy and stability. They are intended for indu
o.o.
Testing resistance thermometers are industrial RTDs with high accuracy and stability. They are intended for indu-
o.o.
-strial and laboratory apllications. Thanks to their design (tight thermowell with a plastic hand) they can be used in
o.o.strial and laboratory apllications. Thanks to their design (tight thermowell with a plastic hand) they can be used in
11 – K – 152 – 55 – 1/2"20UNF – 5 – 1Temperature sensor model 11, thermocouple for measuring the temperature of molten plastic, type K (NiCr-NiAl), length 152 mm, thread length 55 mm, thread dimension 1/2"10UNF. , exposed measuring 5 mm long tip. Insulated hot junction.
ORDERING CODE:TAB.
Thermocouples intended to measure the temperature of molten plastic. They are designed for high preassure appli-cations, eg. in injection molding machine. Sensors are available at several standard lengths. Measuring tip sticks out 5-0 mm (it is flat). Sensors have the junction galvanically insulated from the thermowell. Supplied complete with the compensating standard plug with round pins (grounded junction on request).
1) other construction on request 2) Calibration Certificate charged separately 3) class 1 on request
11sensor type
length L [mm]
thread length
thread type
measuring tip length
hot junction type
Give sensor type, table 1
Give length L [mm]
Give thread type (standard: 55 mm)
Give thread type ( standard: 1/2’’ – 20UNF)
Give measuring tip length: 5 mm or 0 mm
Give junction type, table 2
11 K 152 55 1/2"20UNF 5 I1
Lg
Lg
L
L
5 mm
Ø3
Calibration certificate of our Accredited Laboratory upon request CALIBRATION
CERTIFICATE
THERMOCOUPLES FOR MEASURING THE MOLTEN PLASTIC11 � thermocouple type J or K – class 2 (to PN-EN 60584) 3)
� There are the following lengths available:
76 mm(3’’), 102 mm(4’’), 152 mm(6’’), 229 mm(9’’),
� sheath material: SS316,
� screw with thread ½’’ – 20UNF (thread length Lg=55mm)
� measuring tip, diameter 3 mm, � measuring tip length: 5 mm or 0 mm � connection: standard compensated connector � insulated hot junction or grounded to sheath � operating temperature: 0 ÷ 600 °C (on the tip) 2)
TEMPERATURE RANGE *)TEMPERATURE RANGE *)TAB. 1
SENSOR TYPE THERMO-ELECTRODES TYPE OPERATING TEMPERATURE RANGE [°C]
J Fe - CuNi 0÷ 600
K NiCr - NiAl 0 ÷ 600
*) Tolerance to PN-EN 60584-1, table I, page 63
HOT JUNCTION CODE DESCRIPTION DRAWING
I1 Simplex Insulated Junction
Z1 Duplex grounded junction
RODZAJE SPOIN POMIAROWYCHRODZAJE SPOIN POMIAROWYCHTAB. 2
29.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH 5 mm
CZAH 5 mm
Ø3
CZAH Ø3Ø3
CZAH Ø3
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
11 – K – 152 – 55 – 1/2"20UNF – 5 – 1
POMIAR
11 – K – 152 – 55 – 1/2"20UNF – 5 – 1Temperature sensor model 11, thermocouple for measuring the temperature of molten plastic, type K (NiCr-NiAl),
POMIAR
Temperature sensor model 11, thermocouple for measuring the temperature of molten plastic, type K (NiCr-NiAl), length 152 mm, thread length 55 mm, thread dimension 1/2"10UNF. , exposed measuring 5 mm long tip. Insulated POMIA
R
length 152 mm, thread length 55 mm, thread dimension 1/2"10UNF. , exposed measuring 5 mm long tip. Insulated hot junction. POMIA
R
hot junction. POMIAR
ORDERING CODE:
POMIAR
ORDERING CODE:
POMIAR
POMIAR
ORDERING CODE:
POMIAR
ORDERING CODE:
POMIAR
POMIAR
POMIAR
TAB.
POMIAR
TAB.
Give thread type ( standard: 1/2’’ – 20UNF)
POMIAR
Give thread type ( standard: 1/2’’ – 20UNF)
Give measuring tip length: 5 mm or 0 mm
POMIAR
Give measuring tip length: 5 mm or 0 mm
Give junction type, table 2
POMIAR
Give junction type, table 2
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
11
POMIAR
11 K
POMIAR
K
POMIAR
POMIAR
POMIAR
Lg
POMIAR
Lg
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
length
Sp.
lengththread
Sp.
thread type
Sp.
type
z insulated hot junction or grounded to sheath z insulated hot junction or grounded to sheath operating temperature: 0 ÷ 600 °C (on the tip)z operating temperature: 0 ÷ 600 °C (on the tip)
o.o.
Thermocouples intended to measure the temperature of molten plastic. They are designed for high preassure appli
o.o.
Thermocouples intended to measure the temperature of molten plastic. They are designed for high preassure appli-
o.o.
-cations, eg. in injection molding machine. Sensors are available at several standard lengths. Measuring tip sticks out
o.o.cations, eg. in injection molding machine. Sensors are available at several standard lengths. Measuring tip sticks out
5-0 mm (it is flat). Sensors have the junction galvanically insulated from the thermowell. Supplied complete with the
o.o.5-0 mm (it is flat). Sensors have the junction galvanically insulated from the thermowell. Supplied complete with the
o.o.
measuring tip length: 5 mm or 0 mm o.o.
measuring tip length: 5 mm or 0 mm connection: standard compensated connector o.
o.connection: standard compensated connector insulated hot junction or grounded to sheath o.
o.insulated hot junction or grounded to sheath
Give the estimated operating temperature
Give length L for version 2 and 3 or pipe diameter Ø for version 4 [mm]
12 – Pt100 – A – 3 – 2 – 40 – 40 °C
Temperature sensor model 12 ( resistance thermometer with wall housing). Type Pt100, class A, 3-wire configura-tion. Housing version 2, length L=40 mm, operating temperature max. 40 °C
ORDERING CODE:ORDERING CODE:TAB.
12Sensor intended to measure the ambient temperature in closed rooms and open spaces, eg. in ventilation shafts, version 4 is designed for oil pipeline applications to measure the outdoor temperature.
� housing material: plastic ABS..operating temperature: -40 ÷ 80 °C
� measuring tip (version 2 and 3) pipe Ø 6
� steel ring for the pipe (VERSION 4)
12sensor type
accuracy class
number of wires
housing version
L or Ømax. operating
temperature
Pt100Pt500Pt1000
Give acurany class, table 1
Give number of wires, table 2
Give version of housing (see the photo) 1 – inside, 2 – outside, 3 – ouside with the perforated tip, 4 – for pipeline applications
12 Pt100 A 3 2 40 40 °C
VERSION1
VERSION 2
VERSION 3
VERSION 4
L
L
Ø
12 RESISTANCE THERMOMETERS WITH THE WALL-MOUNT HOUSING12
RESISTORS TOLERANCE CLASS AND TEMPERATURE RANGE *)RESISTORS TOLERANCE CLASS AND TEMPERATURE RANGE *)TAB. 1
TOLERANCE CLASS FOR THIN FILM RESISTORS TOLERANCE VALUE **)
A -30 ÷ +80 ± ( 0.15+0.002 I t I )
B -50 ÷ +80 ± ( 0.3+0.005 I t I )
*) to PN-EN60751:2009,**) I t I = temperature in °C no matter what unit (absolute value)
SIINGLE (ONE RESISTOR)
2-WIRE DESIGN 3-WIRE DESIGN 4-WIRE DESIGN
white
red
white
redred
whitewhite
redred
WIRING CONFIGURATION AND COLOUR MARKINGWIRING CONFIGURATION AND COLOUR MARKINGTAB. 2
30. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH VERSION 4
CZAH VERSION 4
ØCZAH Ø
POMIAR
POMIAR
Give the estimated operating temperature
POMIAR
Give the estimated operating temperature
POMIAR Give length L for version 2 and 3 or pipe diameter Ø for version 4 [mm]
POMIAR Give length L for version 2 and 3 or pipe diameter Ø for version 4 [mm]
POMIAR
ORDERING CODE:
POMIAR
ORDERING CODE:
POMIAR
POMIAR
ORDERING CODE:
POMIAR
ORDERING CODE:
POMIAR
POMIAR
POMIAR with the perforated tip, 4 – for pipeline applications
POMIAR with the perforated tip, 4 – for pipeline applications
POMIAR
POMIAR
POMIAR
12 – Pt100 – A – 3 – 2 – 40 – 40
POMIAR
12 – Pt100 – A – 3 – 2 – 40 – 40
Temperature sensor model 12 ( resistance thermometer with wall housing). Type Pt100, class A, 3-wire configura
POMIAR
Temperature sensor model 12 ( resistance thermometer with wall housing). Type Pt100, class A, 3-wire configuration. Housing version 2, length L=40 mm, operating temperature max. 40 °C
POMIAR
tion. Housing version 2, length L=40 mm, operating temperature max. 40 °C
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Pt100
POMIAR
Pt100
POMIAR
POMIAR S
p.
Sp.
Sp.
Give version of housing (see the photo) 1 – inside, 2 – outside, 3 – ouside Sp.
Give version of housing (see the photo) 1 – inside, 2 – outside, 3 – ouside
z z z z z z L or z L or o.o.
Sensor intended to measure the ambient temperature in closed rooms and open spaces, eg. in ventilation shafts,
o.o.
Sensor intended to measure the ambient temperature in closed rooms and open spaces, eg. in ventilation shafts,
o.o.
o.o.
o.o.
max. operating o.o.
max. operating
Calibration certificate of our Accredited Laboratory upon request CALIBRATION
CERTIFICATE
PRECIOUS METAL TESTING THERMOCOUPLES TYPE S AND R13Thermoelements are produced from the Platinum alloy and rhodium of the highest quality. We offer type S and R and manufacture two models of each type. All the four models of the sensors are designed to be as all-purpose as possible. Hot junction is closed in the ceramic pipe Al2O3 of high purity. Outside pipe diameter is 6 mm, measuring part length is 640 mm. Due to a relatively small diameter and the right choice of length this sensor can be calibrated by fixed point method MST-90 (in fixed point cells). Cables were made from the anaerobic copper of high purity to provide great integrity and measuring accuracy.
Main advantages:
� high stability
� Uncertainty of calibration about 0,23 °C
� There are two designs available: with the reference junction and without it (bare ends)
DATASHEETDATASHEETTAB.
Measuring range 0 °C to 1085 °C
Type PtRh10-Pt (type S) and PtRh13-Pt (type R)
Fixed point method calibration(in fixed point cells)
in FP of Zinc (419,527 °C),in FP of Aluminium (660,323 °C)
in FP of Copper (1084,62 °C)
Ceramic sheath of the junction (working part) Ø6 mm x 640 mm (details shown in the drawing)
Sheath dimensions Ø6 mm x 230 mm (details shown in the drawing)
Handle Plastic, max. operating temperature 80 °C
Long term stability (one year) ± 0,5 °C (depends mostly on the usage)
depth At least 400 mm is reccomended
Available types:
� 13-x-01-G Temperature sensor type S or R with the reference junction and bare ends
� 13-x-01-Wm Temperature sensor type S or R with the reference junction and a miniature compensated male connector Cu-Cu
� 13-x-01-Wm Temperature sensor type S or R with the reference junction and a standard compensated male connector Cu-Cu
� 13-x-02-G Temperature sensor type S or R without the reference junction, ended with bare ends
� 13-x-02-Wm Temperature sensor type S or R without the reference junction, ended with a miniature compensa-ted male connector S/R type *)
� 13-x-02-Wm Temperature sensor type S or R without the reference junction, ended with a standard compensated male connector S/R type *)
*) for versions without the junction, thermocouple cable is 1500 mm long
How to order: Please specify the type of the temperature sensor: replace 'x' with 'S' or 'R'
ORDERING CODE:ORDERING CODE:TAB.
650 mm
110 mm
Ø6 mm
Ø6 mm
Ø8 mm
Silicone unsulated thermocouple cable
length 650 mm
Silicone insulated extension cable (Cu)
length 1500 mm
reference junction,
stainless steel
ceramic protection tube
Al203
80 m
m23
0 m
m
31.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH 650 mm
CZAH 650 mm
Ø6 mmCZAH
Ø6 mm
reference
CZAH reference junction,
CZAH junction,
stainless steel
CZAH stainless steel
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Fixed point method calibration
POMIAR
Fixed point method calibration(in fixed point cells)
POMIAR
(in fixed point cells)
Ceramic sheath of the junction
POMIAR
Ceramic sheath of the junction (working part)
POMIAR
(working part)
Sheath dimensions
POMIAR
Sheath dimensions
Handle
POMIAR
Handle
Long term stability (one year)
POMIAR
Long term stability (one year)
Available types:POMIAR
Available types:POMIAR S
p. There are two designs available: with the reference junction and without it (bare ends)
Sp. There are two designs available: with the reference junction and without it (bare ends)
Sp.
Sp.
Sp. z There are two designs available: with the reference junction and without it (bare ends)z There are two designs available: with the reference junction and without it (bare ends)
o.o.
Thermoelements are produced from the Platinum alloy and rhodium of the highest quality. We offer type S and R
o.o.
Thermoelements are produced from the Platinum alloy and rhodium of the highest quality. We offer type S and R and manufacture two models of each type. All the four models of the sensors are designed to be as all-purpose as
o.o.and manufacture two models of each type. All the four models of the sensors are designed to be as all-purpose as
possible. Hot junction is closed in the ceramic pipe Al2O3 of high purity. Outside pipe diameter is 6 mm, measuring
o.o.possible. Hot junction is closed in the ceramic pipe Al2O3 of high purity. Outside pipe diameter is 6 mm, measuring
part length is 640 mm. Due to a relatively small diameter and the right choice of length this sensor can be calibrated
o.o.part length is 640 mm. Due to a relatively small diameter and the right choice of length this sensor can be calibrated
by fixed point method MST-90 (in fixed point cells). Cables were made from the anaerobic copper of high purity to o.o.by fixed point method MST-90 (in fixed point cells). Cables were made from the anaerobic copper of high purity to
Give connector type; table B, page 51 (skip if nor requested)
14Intended to be compatible with any temperature measuring instrument, parts of machines, pipelines etc. It is made of self-sticky VELCRO® tape for multple usage and quickly assembly and disassembly.
� Type K or T – class 2 (to PN-EN 60584-1; table I, page 63)
� tape width: 19 mm
� operating temperature: -15 ÷ 100 °C
� tape thickness: about 0,85 mm
� cable type TT201 (PTFE insulatED 2x0.22 mm2). Standard length: 2 meters
� Grounded hot junction
� Temperature sensor terminated with a compensated male connector
14 – K – 200 – 2 – MW1Temperature sensor model 14 (ring thermocouple), type K with VELCRO® adjustable ring. Tape length 200 mm, cable length 2 meters, PTFE insulated terminated to the miniature male connector (MW1)
ORDERING CODE:ORDERING CODE:TAB.
14masuring
element typetape
lengthcable length
compensated connector
K, J or T
Give tape length [mm]
Give cable length Lp [mm]
14 K 200 2 MW1
1212 VELCRO THERMOCOUPLES14
Lp
32. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH POMIA
R
POMIAR
Give connector type; table B, page 51 (skip if nor requested)
POMIAR
Give connector type; table B, page 51 (skip if nor requested)
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Give tape length [mm]
POMIAR
Give tape length [mm]
Give cable length Lp [mm]
POMIAR
Give cable length Lp [mm]
POMIAR
POMIAR S
p. Temperature sensor terminated with a compensated male connector
Sp. Temperature sensor terminated with a compensated male connector
Sp.
Sp.
Sp.
Sp.
tape Sp.
tape
z o.o
.Intended to be compatible with any temperature measuring instrument, parts of machines, pipelines etc. It is
o.o.
Intended to be compatible with any temperature measuring instrument, parts of machines, pipelines etc. It is
15Versatile thermocouple or RTD sensor suitable for temperature measurements on ferrous surfaces up to a ma-ximum of 300°C.
� thermocouple sensor types K, J – 2 clas ( to PN-EN 60584) 1)
� resistance thermometer (RTD) Pt100, class B (to PN-EN 60751:2009) 2)
� operating range -10 ÷ 300° C
� fibreglass insulated cable with stainless steel overbraid ( standard length is 2 meters)
� 3-wire version (for resistance thermometers)
� grounded junction (for thermocouple)
� magnet dimensions: 29mm dia. x 8.5mm thick
15 – J – 2 – 2 – MW1Temperature sensor type 15 (magnet thermocouple), type J, class 2, leads: 2 meters terminated to the miniature male connector type K.
ORDERING CODE OF THERMOCOUPLEORDERING CODE OF THERMOCOUPLETAB.
15sensor type
classcable length
Lp [m]compensated
connector
K, J or Pt100 **)
Give accuracy class 2 or B *) **)
Give cable length Lp (standard length is 2 meters)
15 J 2 2 MW1
15 – Pt100 – B – 2Temperature sensor type 15 (magnet resistance thermometer), type P100, class B, leads: 2 meters.
ORDERING CODE OF RESISTANCE THERMOMETERSORDERING CODE OF RESISTANCE THERMOMETERSTAB.
15 Pt100 B 2
Give compensated conector type; table B, page 51 (skip in not requested)Lp
Ø29
15MAGNET THERMOCOUPLES AND RESISTANCE THERMOMETERS
15
*) class 1 available on request. Tolerance to PN-EN 60584-1 standard, table I, page 63**) for RTD: class A and other types than Pt100 available on request
33.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH POMIA
R
POMIAR
POMIAR
POMIAR
POMIAR
Give accuracy class 2 or B *) **)
POMIAR
Give accuracy class 2 or B *) **)
Give cable length Lp (standard length is 2 meters)
POMIAR
Give cable length Lp (standard length is 2 meters)
POMIAR
Give compensated conector type; table B, page 51 (skip in not requested)
POMIAR
Give compensated conector type; table B, page 51 (skip in not requested)
POMIAR
POMIAR
TAB. POMIAR
TAB. POMIAR
POMIAR
POMIAR
*) class 1 available on request. Tolerance to PN-EN 60584-1 standard, table I, page 63
POMIAR
*) class 1 available on request. Tolerance to PN-EN 60584-1 standard, table I, page 63**) for RTD: class A and other types than Pt100 available on request
POMIAR
**) for RTD: class A and other types than Pt100 available on request
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
cable length
Sp.
cable length Lp [m]
Sp.
Lp [m]
Sp.
Sp.
Sp. z
o.o.
Versatile thermocouple or RTD sensor suitable for temperature measurements on ferrous surfaces up to a ma
o.o.
Versatile thermocouple or RTD sensor suitable for temperature measurements on ferrous surfaces up to a ma-
o.o.
-
Give tip code, table 3
Designed for temperature measurements of various parts of machines, such as housings, bearings and other ele-ments which warm up while working and need temperature control for safety reasons.
There are resistance thermometers eg. Pt100, Pt1000 or thermocouples J, T, K available. Depending on the material used (thermowell, cable), temperature sensors are suitable for measurements up to a maximum of 400 °C.
16sensor type
accuracy class
junction type or number of
wires
measuring tip
cable length Lp
cable type
construction (with or
without the connector)
max operating temperature
Pt100, Pt500, Pt1000, J, K, T *) other on request
Give accuracy class, table 1
Give junction type or the number of wires, table 2 (eg. I1 or Z1 or 2 or 3 or 4)
Give cable length Lp [mm]
Give cable type, table 4
Give connector type, table 5 (skip in not requested)
Give max. operating temperature [°C]
16 – Pt100 – A – 3 – Z3M6 – 1500 – RW301 – 250 °C
Temp. sensor type 16 (assembled to machine parts), type Pt100, accuracy class A, 3-wire configure, terminated to the M6 bolt with thread 10 mm long, cable length 1500 mm type RW301 (3x0,22m2 fiberglass insulated with stainless steel overbraid Max. operating temperature is 250 °C.
ORDERING CODE:ORDERING CODE:TAB.
16 Pt100 A 3 Z3M6 1500 RW301 – 250 °CZ3Z4
Z1 Z2
Lp Lp
Lp
Lp
141212TEMPERATURE SENSORS ASSEMBLED TO THE MACHINE PARTS16
34. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
Z3CZAH
Z3Z3CZAH
Z3
Z1
CZAH Z1
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Give cable type, table 4
POMIAR
Give cable type, table 4
POMIAR
Give connector type, table 5 (skip in not requested)
POMIAR
Give connector type, table 5 (skip in not requested)
POMIAR
Give max. operating temperature [°C]
POMIAR
Give max. operating temperature [°C]
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR S
p.
Sp.
Sp.
Sp. z z z z
connector)z connector)z z o.o
.Designed for temperature measurements of various parts of machines, such as housings, bearings and other ele
o.o.Designed for temperature measurements of various parts of machines, such as housings, bearings and other ele-
o.o.-
There are resistance thermometers eg. Pt100, Pt1000 or thermocouples J, T, K available. Depending on the material
o.o.There are resistance thermometers eg. Pt100, Pt1000 or thermocouples J, T, K available. Depending on the material
used (thermowell, cable), temperature sensors are suitable for measurements up to a maximum of 400 °C.
o.o.used (thermowell, cable), temperature sensors are suitable for measurements up to a maximum of 400 °C.
o.o.
o.o.
o.o.
construction o.o.
construction (with or o.
o.(with or
without the o.o.
without the max operating o.o.
max operating
TEMP SENSORS TOLERANCE CLASS AND OPERATING RANGE *)TEMP SENSORS TOLERANCE CLASS AND OPERATING RANGE *)TAB. 1
TOLERANCE CLASS
FOR WIRE WOUND RESISTORS FOR THIN FILM RESISTORS TOLERANCE VALUE **)
AA -50 ÷ +250 0 ÷ +150 ± ( 0.1+0.0017 I t I )
A -100 ÷ +400 -30 ÷ +300 ± ( 0.15+0.002 I t I )
B -196 ÷ +400 -50 ÷ +400 ± ( 0.3+0.005 I t I )
C -196 ÷ +400 -50 ÷ +400 ± ( 0.6+0.01 I t I )
*) to PN-EN60751:2009**) I t I = modul in °C degrees, no matter what unit (absolute value)
OPERATING TEMP. RANGE *)
SENSOR TYPE TYPE OF THERMOCOUPLE WIRE LONG-TERM OPERATING RANGE [°C] *) SHORT-TERM OPERATING RANGE [°C] *)
J Fe - CuNi +20 ÷ 400 -180 ÷ 400
T Cu - CuNi -185 ÷ 300 -250 ÷ 400
K NiCr - NiAl 0 ÷ 400 -180 ÷ 400
*) Given temperature ranges are mostly dependent on the outer thermowell material. Tolerance to PN-EN 60584-1; table I, page 63
SIINGLE (ONE RESISTOR)
2-WIRE DESIGN 3-WIRE DESIGN 4-WIRE DESIGN
white
red
white
redred
whitewhite
redred
DOUBLE (2 RESISTORS)
2-WIRE DESIGN 3-WIRE DESIGN 4-WIRE DESIGN
white
red
yellow
black
white
redred
black
yellowyellow
whitewhite
redred
blackblack
yellowyellow
JUNCTION TYPE, CONFIGURATION AND COLOUR MARKINGJUNCTION TYPE, CONFIGURATION AND COLOUR MARKINGTAB. 2
HOT JUNCTION TYPES
HOT JUNCTION CODE DESCRIPTION DRAWING
I1 Simplex insulated junction
Z1 Simplex grounded junction
*) in case of duplex senssor, hot junctions are grounded also with each other. **) hot junctions are insulated also from each other
35.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH
CZAH white
CZAH white
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH POMIA
R
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR HOT JUNCTION TYPES
POMIAR HOT JUNCTION TYPES
Simplex insulated junction
POMIAR
Simplex insulated junction
Simplex grounded junction
POMIAR
Simplex grounded junction
*) in case of duplex senssor, hot junctions are grounded also with each other.
POMIAR
*) in case of duplex senssor, hot junctions are grounded also with each other.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. z z z z
SHORT-TERM OPERATING RANGE [°C] *)
z SHORT-TERM OPERATING RANGE [°C] *)
-180 ÷ 400z -180 ÷ 400
-250 ÷ 400z -250 ÷ 400
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
SHORT-TERM OPERATING RANGE [°C] *)o.o.
SHORT-TERM OPERATING RANGE [°C] *)
MEASURING TIP SYMBOL
THREAD TYPE [G]
HOLE DIAMETER LENGTH L MEASUREMENT WAY HOW IT LOOKS
Z1L10 *
N/D N/D
10 mm
Thermocouple/ RTDZ1L15 * 15 mm
Z1L20 * 20 mm
Z242
N/D
Ø 4.2 mm
N/D Thermocouple/ RTDZ252 Ø 5.2 mm
Z262 Ø 6.2 mm
Z3M6 M6
N/D
10 mm
Thermocouple/ RTD
Z3M81 M8x1 12 mm
Z3M101 M10x1 15 mm
Z3M1215 M12x1.5 20 mm
Z442
N/D
Ø 4.2 mm
N/D Thermocouple (only with grounded junction)Z452 Ø 5.2 mm
Z462 Ø 6.2 mm
*) probe diameter is Ø 4mm
MEASURING TIPSMEASURING TIPSTAB. 3
The sensors can be supplied complete with cables of various design. The following isulation types are available: PCV, PTFE, fiberglass, Kapton or combination of the mentioned mate-rials. Standards cable sections are 0.22mm2 (7/0.2 mm).
The most cammon cables:
RTD cables:RS301 - 3x0,22 mm2 – Silicone insulated / 3 wiresRS401 - 4x0,22 mm2 – Silicone insulated/ 4 wiredRW301 - 3x0,22 mm2 – fiberglass insulated/ steel braid, 3 wiresRW401 - 4x0,22 mm2 – fiberglass insulated / steel braid, 4 wires
Thermocouple cables:TS201 - 2x0,22 mm2 – Silicone insulatedTW204 - 2x0,22 mm2 – fiberglass insulated / stainless steel overbraid TT201 - 2x0,22 mm2 – Teflon insulatedTT204 - 2x0,22 mm2 - Teflon insulated / stainless steel overbraid
LEAD WIRESLEAD WIRESTAB. 4
If you need a RTD or thermocouple compensated pin plug, see table B, page 51 to specify a model, eg. MW1, SW1, MW2 or MW3 etc.
THERMOCOUPLE AND RTD CONNECTORSTHERMOCOUPLE AND RTD CONNECTORSTAB. 5
Ø
Ø 4,2 mm
L
Ø
L
G
36. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH The most cammon cables:
CZAH The most cammon cables:
RS301 - 3x0,22 mm
CZAH RS301 - 3x0,22 mm2
CZAH 2 – Silicone insulated / 3 wires
CZAH – Silicone insulated / 3 wires
RS401 - 4x0,22 mm
CZAH RS401 - 4x0,22 mm2
CZAH 2 – Silicone insulated/ 4 wired
CZAH – Silicone insulated/ 4 wired
RW301 - 3x0,22 mm
CZAH RW301 - 3x0,22 mm2
CZAH 2 – fiberglass insulated/ steel braid, 3 wires
CZAH – fiberglass insulated/ steel braid, 3 wires
RW401 - 4x0,22 mm
CZAH RW401 - 4x0,22 mm2
CZAH 2 – fiberglass insulated / steel braid, 4 wires
CZAH – fiberglass insulated / steel braid, 4 wires
Thermocouple cables:
CZAH Thermocouple cables:TS201 - 2x0,22 mm
CZAH TS201 - 2x0,22 mmTW204 - 2x0,22 mmCZAH TW204 - 2x0,22 mmTT201 - 2x0,22 mmCZAH
TT201 - 2x0,22 mmTT204 - 2x0,22 mmCZAH
TT204 - 2x0,22 mmCZAH POMIA
R
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
N/D
POMIAR
N/D Thermocouple (only with
POMIAR
Thermocouple (only with
POMIAR
The sensors can be supplied complete with cables of various design. The following isulation types are available: PCV, PTFE, fiberglass, Kapton or combination of the mentioned matePOMIAR
The sensors can be supplied complete with cables of various design. The following isulation types are available: PCV, PTFE, fiberglass, Kapton or combination of the mentioned materials. Standards cable sections are 0.22mm POMIA
R
rials. Standards cable sections are 0.22mm2 POMIAR
2 (7/0.2 mm). POMIAR
(7/0.2 mm). POMIAR
POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Thermocouple/ RTD
Sp.
Thermocouple/ RTD
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
GSp.
G
z z z z o.o
.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.
CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
We offer a wide variety of general purpose hand held thermocouples. All sensors are supplied with a 1,5 metre coiled lead and a fixed miniature pin plug which makes them suitable for most of hand held indicators and other instru-mentation by using thermocouple extension cable and the appropriate connectors. Depending on the thermocouple length and its construction (e.g. sheath material), operating range is up to 1150 °C
� available types are K, J,N or T
� accuracy class is 2 (standard) or 1 (to PN-EN 60584-1, table I, page 63)
� available in mineral insulated cable or steel protective pipe
� several tips available: flat, needlelike, touch etc.
� ending with extension coiled lead and a miniature pin plug
� plastic handle rated up to 120 °C
Give sheath material, table 3
17sensor type
accuracy class
junction type
sheath maerial
the tip type
sheath diameter
length Lmax. operating
temp.
Give sensor type, table 1(e.g.J, T, K, N)
Give accuracy class 1 or 2
Give junction type, table 2
Give the tip type, table 4
Give sheath diameter, table 4
Give length L [mm], table 4
Give max. operating temp. [°C]
17 K 1 I1 310 PK 6,0 1500 800 °C
17 – K – 1 – I1 – 310 – PK – 6,0 – 1500 – 800 °C
Sensor type 17 (hand held thermocouple with a plactic hand), type K (NiCr-NiAl), simplex, grounded junction, the protective pipe made of heat-proof steel 310 (H25N20S2), mineral insulated thermocouple with a standard tip (round). Sheath diameter 6,0 mm, length 1500 mm, max.operating range 800 °C.
ORDERING CODE:ORDERING CODE:TAB.
tab. 4
15 HAND HELD THERMOCOUPLES17
Calibration certificate of our Accredited Laboratory upon request CALIBRATION
CERTIFICATE
tab. 4
L
Ø
37.CZAH
CZAH
CZAH
CZAH
CZAH
CZAH POMIA
R
POMIAR
Give sheath material, table 3
POMIAR
Give sheath material, table 3
POMIAR
POMIAR
POMIAR
POMIAR
Give accuracy class 1 or 2
POMIAR
Give accuracy class 1 or 2
Give junction type, table 2
POMIAR
Give junction type, table 2
POMIAR
Give the tip type, table 4
POMIAR
Give the tip type, table 4
POMIAR
Give sheath diameter, table 4POMIAR
Give sheath diameter, table 4POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
sheath Sp.
sheath maerialSp.
maerial
the tip Sp.
the tip typeSp.
type
z o.o
.We offer a wide variety of general purpose hand held thermocouples. All sensors are supplied with a 1,5 metre coiled
o.o.
We offer a wide variety of general purpose hand held thermocouples. All sensors are supplied with a 1,5 metre coiled lead and a fixed miniature pin plug which makes them suitable for most of hand held indicators and other instru
o.o.lead and a fixed miniature pin plug which makes them suitable for most of hand held indicators and other instru-
o.o.-
mentation by using thermocouple extension cable and the appropriate connectors. Depending on the thermocouple
o.o.mentation by using thermocouple extension cable and the appropriate connectors. Depending on the thermocouple
CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
TEMPERATURE RANGE *)TEMPERATURE RANGE *)TAB. 1
SENSOR TYPE TYPE OF THERMO-ELECTRODES LONG-TERM OPERATING RANGE [°C] *) SHORT-TERM OPERATING RANGE [°C] *)
J Fe - CuNi +20 ÷ 700 -180 ÷ 750
T Cu - CuNi -185 ÷ 300 -250 ÷ 400
K NiCr - NiAl 0 ÷ 1100 -180 ÷ 1350
N NiCrSi - NiSi 0 ÷ 1100 -270 ÷ 1300
*) Given temperature ranges are mostly dependent on the outer sheath material of a cable. Tolerance to PN-EN 60584-1; table I, page 63
HOT JUNCTION CODE DESCRIPTION DRAWING
I1 Simplex Insulated Junction
Z1 Duplex insulated junction
JUNCTION TYPESJUNCTION TYPESTAB. 2
MATERIAL DESCRIPTION AIR OPERATING TEMPERATURE
INC (Inconel 600; 2.4816)Nickel – chrome – iron alloy, with very good oxidation resistance and great high temperature resistance
(to 1150 °C). Suitable for neutral, oxidising environment or vacuum. to 1150 °C
310 (H25N20S2; 1.4841)Steel comprised of 25%Cr – 20%Ni.
Stainless steel, heatproof, oxidation-proof up to temperature of 1150 °C to 1150 °C
NIC (Nicrobell®)Nicrobell is nickel-chrome alloy with 1,4% of silicon oxide. Silicon ensure high oxidation resistance and
strength at high temperature up to 1250 °C. to 1250 °C
OXL (OMEGACLAD® XL)OMEGACLAD® XL type of steel ensures excellent resistance at high temperature It is resistant to oxidation, carburization and chlorination. Continuous operating temperature is up to 150 °C and short-term operating
temperature: 1335 °Cto 1335 °C
PYR (PYROSIL®)PYROSIL® ensures perfect mechanical strength, high corrosion resistance as well as durability and
stability of EMF level during long-term usage at high temperature up to 1250 °C. to 1250 °C
321 (1.4541; 1H18N9T) Steel similar to grade 304 (18% Cr, 10% Ni) but with titanium as a stabilizer. to 900 °C
316 (1.4401; H17N13M2T)Steel similar to 304 (17% Cr, 9% Ni) with 3% of molybdenum. Because this steel grade is more corrosion resistant than 321 and 304, it is good for humid environment and for aplication in places threatened by
corrosion (sea water). to 900 °C
304 (1.4301; 0H18N9)Austentic stainles steel 18%Cr-8%Ni. Corrosion resistant (with no excess oxidation and no resistance lost) up to 80 800 °C. It is the most popular acidproof material, easy for metalworking and welding. to 800 °C
PtRh10Recommended for operating temperature 1550 °C, its melting point is 1850 °C. Most often used in
neutral, oxidising environment or vacuum. to 1850 °C
*) other types available on request
SHEATH MATERIALS *)SHEATH MATERIALS *)TAB. 3
38. CZAH
CZAH
CZAH
CZAH
CZAH
CZAH PYR (PYROSIL®)
CZAH PYR (PYROSIL®)
321 (1.4541; 1H18N9T)
CZAH 321 (1.4541; 1H18N9T)
316 (1.4401; H17N13M2T)
CZAH 316 (1.4401; H17N13M2T)
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
DESCRIPTION
POMIAR
DESCRIPTION
Nickel – chrome – iron alloy, with very good oxidation resistance and great high temperature resistance
POMIAR
Nickel – chrome – iron alloy, with very good oxidation resistance and great high temperature resistance (to 1150 °C). Suitable for neutral, oxidising environment or vacuum.
POMIAR
(to 1150 °C). Suitable for neutral, oxidising environment or vacuum.
Steel comprised of 25%Cr – 20%Ni.
POMIAR
Steel comprised of 25%Cr – 20%Ni.Stainless steel, heatproof, oxidation-proof up to temperature of 1150 °C
POMIAR
Stainless steel, heatproof, oxidation-proof up to temperature of 1150 °C
Nicrobell is nickel-chrome alloy with 1,4% of silicon oxide. Silicon ensure high oxidation resistance and
POMIAR
Nicrobell is nickel-chrome alloy with 1,4% of silicon oxide. Silicon ensure high oxidation resistance and
OMEGACLAD® XL type of steel ensures excellent resistance at high temperature It is resistant to oxidation, POMIAR
OMEGACLAD® XL type of steel ensures excellent resistance at high temperature It is resistant to oxidation, carburization and chlorination. Continuous operating temperature is up to 150 °C and short-term operating POMIA
R
carburization and chlorination. Continuous operating temperature is up to 150 °C and short-term operating POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. z z z
DRAWINGz DRAWINGz z z z z o.o
.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.
CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
TYPE CONSTRUCTION DIAMETER ØMAX. OPERATING
TEMP. DRAWING
PK*) MI sensor with round tip 1 mm, 1.5 mm, 2.0 mm, 3.0 mm, 4.5 mm, 6.0 mm
max.1150 °C, depending on sheath diameter and length
L
Ø
PS MI sensor with conical tip 3.0 mm, 4.5 mm, 6.0 mm max.1150 °C, depending on sheath diameter and length
L
Ø
RK*) Tube, round tip 3.0 mm, 4.0 mm, 5.0 mm, 6.0 mm Max. 400 °C
L
Ø
RS Tube, conical tip 3.0 mm, 4.0 mm, 5.0 mm, 6.0 mm Max. 400 °C
L
Ø
RI Tube, needlelike tip 4.0 mm, 5.0 mm, 6.0 mm Max. 400 °C
L
Ø
RD Tube - touch probe 15 mm Max. 400 °C
L
Ø15
*) flat tip available on request
**) other tips available on request
MEASURING TIP TYPES **)MEASURING TIP TYPES **)TAB. 4
39.CZAH
CZAH POMIA
R
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR Max. 400 °C
POMIAR Max. 400 °C
POMIAR
POMIAR
Max. 400 °C
POMIAR
Max. 400 °C
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. L
Sp. L
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. z z z z
o.o.
o.o.
o.o.
o.o.
o.o.
Øo.o.
Øo.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
12 HAND HELD RESISTANCE THERMOMETERS18We offer a wide range of general purpose hand held RTDs. All sensors are supplied
with a a 1,5 metre coiled lead and a fixed miniature pin plug which makes them suitable for most of hand held indicators and other instrumentation by using extension cable and the appropriate connectors. Depending on the thermocouple length and its construction (eg. sheath type), operating range is up to 600 °C
� available types: Pt100, Pt500 lub Pt1000
� accuracy class A or B (other classes on request)
� 2,3 or 4-wire version
� mineral insulated cabl or steel protective tube available (table 4)
� several tips available: flat, needlelike etc.,
� ending with a 1,5 metre extension coiled lead and a miniature pin plug (table 4)
� plastic handle rated up to 120 °C or stainless steel handle
Give steel grade, table 3
18sensor type
accuracy class
wiring configura-
tion
sheath material
measuring tip type
sheath diameter
length Lhandle
materialmax. operating
temp.
Pt100, Pt500 or Pt1000
Give accuracy class
Give wiring configuration, table 2
Give sensor termination type, table 4
Give sheath diameter Ø, table 4
Give length L [mm], table 4
Give hand material: TS – plastic or SN – stainless steel
18 – Pt100 – B – 3 – 321 – RS – 5,0 – 150 – SN – 200 °C
Temp. sensor type 18 (hand held resistance thermometer), type Pt100, class B, 3-wire, sheath material: heat-proof steel 321 (1H18N9T), tube version with the conical tip, sheath diameter 5.0mm, length 150mm, plastic hand, max. operating temp. 200 °C.
ORDERING CODE:ORDERING CODE:TAB.
L
Ø
L
Ø
Give max. oprating temp. [°C]
18 Pt100 B 3 321 RS 5,0 150 SN 200 °C
40. CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH POMIA
R
POMIAR
Give steel grade, table 3
POMIAR
Give steel grade, table 3
POMIAR
POMIAR
POMIAR tion
POMIAR tion
POMIAR
POMIAR
POMIAR
Give wiring configuration, table 2
POMIAR
Give wiring configuration, table 2
POMIAR
Give sensor termination type, table 4
POMIAR
Give sensor termination type, table 4
POMIAR
Give sheath diameter POMIAR
Give sheath diameter POMIAR S
p. ending with a 1,5 metre extension coiled lead and a miniature pin plug (table 4)
Sp. ending with a 1,5 metre extension coiled lead and a miniature pin plug (table 4)
plastic handle rated up to 120 °C or stainless steel handle
Sp.
plastic handle rated up to 120 °C or stainless steel handle
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
sheath Sp.
sheath material Sp.
material
measuring Sp.
measuring tip typeSp.
tip type
sheath Sp.
sheath Sp.
Sp.
Sp. z
o.o.with a a 1,5 metre coiled lead and a fixed miniature pin plug which makes them suitable for most of hand held
o.o.with a a 1,5 metre coiled lead and a fixed miniature pin plug which makes them suitable for most of hand held
indicators and other instrumentation by using extension cable and the appropriate connectors. Depending on the
o.o.indicators and other instrumentation by using extension cable and the appropriate connectors. Depending on the
CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
RESISTOR TOLERANCE CLASS AND OPERATING TEMPERATURES *)RESISTOR TOLERANCE CLASS AND OPERATING TEMPERATURES *)TAB. 1
TOLERANCE CLASS FOR WIRE WOUND RESISTORS FOR THIN FILM RESISTORS TOLERANCE VALUE **)
AA -50 ÷ +250 0 ÷ +150 ± ( 0.1+0.0017 I t I )
A -100 ÷ +450 -30 ÷ +300 ± ( 0.15+0.002 I t I )
B -196 ÷ +660 -50 ÷ +500 ± ( 0.3+0.005 I t I )
C -196 ÷ +660 -50 ÷ +600 ± ( 0.6+0.01 I t I )
*) to PN-EN60751:2009 **) I t I = temperature in °C no matter what unit (absolute value)
SIINGLE (ONE RESISTOR)
2-WIRE DESIGN 3-WIRE DESIGN 4-WIRE DESIGN
white
red
white
redred
whitewhite
redred
WIRING CONFIGURATION AND COLOUR MARKINGWIRING CONFIGURATION AND COLOUR MARKINGTAB. 2
TYPE DESCRIPTION
304 (1.4301; 0H18N9)
Austentic stainles steel 18%Cr-8%Ni. Corrosion resistant (with no excess oxidation and no resistance lost) up to 80 800 °C. It is the most popular acidproof material, easy for metalworking and welding.
321 (1.4541; 1H18N9T) Steel similar to grade 304 (18% Cr, 10% Ni) but with titanium as a stabilizer.
316 (1.4401; H17N13M2T)
Steel similar to 304 (17% Cr, 9% Ni) with 3% of molybdenum. Because this steel grade is more corrosion resistant than 321 and 304, it is good for humid environment and for aplication in places threatened by corrosion (sea water).
*) other steel grades on request
STEEL SHEATH MATERIAL*)STEEL SHEATH MATERIAL*)TAB. 3
TYPE CONSTRUCTION DIAMETER ØMAX. OPERATING
TEMP. DRAWING
PK * MI sensor with round tip 3.0 mm, 4.5 mm 6.0 mm ***)
depends on length and dia.max. 600 °C
L
Ø
PS MI sensor with the conical tip 3.0 mm, 4.5 mm 6.0 mm depends on length and dia.max. 600 °C
L
Ø
RK * Tube, round tip 3.0 mm, 4.0 mm, 5.0 mm, 6.0 mm Max. 400 °C
L
Ø
RS Tube, conical tip 3.0 mm, 4.0 mm, 5.0 mm, 6.0 mm Max. 400 °C
L
Ø
RI Tube, needlelike tip 4.0 mm, 5.0 mm, 6.0 mm Max. 400 °C
L
Ø
*) flat tip on request **) other tip on requst ***) other dia. on request, eg. Ø 1,5 mm and Ø 2,0 mm
MEASURING TIP TYPES **)MEASURING TIP TYPES **)TAB. 4
41.CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH MI sensor with round tip
CZAH MI sensor with round tip
PS
CZAH PS MI sensor with the conical tip
CZAH MI sensor with the conical tip
RK *
CZAH RK *
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR DESCRIPTION
POMIAR DESCRIPTION
Austentic stainles steel 18%Cr-8%Ni. Corrosion resistant (with no excess oxidation and no resistance lost) up to 80 800 °C. It is the most
POMIAR
Austentic stainles steel 18%Cr-8%Ni. Corrosion resistant (with no excess oxidation and no resistance lost) up to 80 800 °C. It is the most popular acidproof material, easy for metalworking and welding.
POMIAR
popular acidproof material, easy for metalworking and welding.
Steel similar to grade 304 (18% Cr, 10% Ni) but with titanium as a stabilizer.
POMIAR
Steel similar to grade 304 (18% Cr, 10% Ni) but with titanium as a stabilizer.
Steel similar to 304 (17% Cr, 9% Ni) with 3% of molybdenum. Because this steel grade is more corrosion resistant than 321 and 304, it is good
POMIAR
Steel similar to 304 (17% Cr, 9% Ni) with 3% of molybdenum. Because this steel grade is more corrosion resistant than 321 and 304, it is good for humid environment and for aplication in places threatened by corrosion (sea water).
POMIAR
for humid environment and for aplication in places threatened by corrosion (sea water).
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
CONSTRUCTION POMIAR
CONSTRUCTION DIAMETER POMIAR
DIAMETER
3.0 mm, 4.5 mm 6.0 mm POMIAR
3.0 mm, 4.5 mm 6.0 mm POMIAR
MEASURING TIP TYPES **)
POMIAR
MEASURING TIP TYPES **)
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. z z z
4-WIRE DESIGNz 4-WIRE DESIGNz o.o
.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.
19
19 – Pt100 – A – 3 – 50 – 1500 – RW301 – 300 °C
Temperature sensor model 19 (adjustable ring RTD senor), type Pt100, class A, 3 wire configuration, pipe diameter: 50 mm, a 1500 mm fiberglass insulated lead with a stainless steel overbraid 3x0,22 m2). Max.operating temp. 300 °C.
ORDERING CODE:ORDERING CODE:TAB.
Sensor for pipe temperature measurement. Measuring probe is attached to an adjustable stainless steel ring. RTD sensor is rated up to 350°C and thermocouple to 400 °C
� available types: Pt100, Pt500, Pt1000, J, K, T
� accuracy class: A or B for resistance thermometers: (to PN-EN 60751) and 1 or 2 for thermocouples (60584-1 table I , page 63)
� 2,3 or 4-wire configuration for resistance thermometers
� insulated or grounded junction for thermocouples
� with fibreglass insulated leads with a stainless steel overbraid
Pt100, Pt500, Pt1000, J, K, T
19sensor type
accuracy class
junction type or the number of
wirespipe dia.
lead length
lead type
max. operating temp.
Give accuracy class, table 1
Give wiring configuration (for RTD) or junction type, table 2
Give a diameter of the pipe to which the sensor will be attached
Give lead length L [mm]
Give max. operating temp. [°C]
Give lead type, table 3
19 Pt100 A 3 50 1500 RW301 300 °C
141219141914191912191914191219141914 ADJUSTABLE RING SENSOR19
Lp
Ø
42. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH POMIA
R
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Give accuracy class, table 1
POMIAR
Give accuracy class, table 1
Give wiring configuration (for RTD) or junction type, table 2
POMIAR
Give wiring configuration (for RTD) or junction type, table 2
Give a diameter of the pipe to which the sensor will be attached
POMIAR
Give a diameter of the pipe to which the sensor will be attached
Give lead length L [mm]
POMIAR
Give lead length L [mm]
POMIAR
Give lead type, table 3
POMIAR
Give lead type, table 3
POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
junction type or
Sp.
junction type or the number of Sp.
the number of
wires Sp.
wirespipe dia.Sp.
pipe dia.
lead Sp.
lead Sp.
Sp. z
o.o.
Sensor for pipe temperature measurement. Measuring probe is attached to an adjustable stainless steel ring. RTD
o.o.
Sensor for pipe temperature measurement. Measuring probe is attached to an adjustable stainless steel ring. RTD
accuracy class: A or B for resistance thermometers: (to PN-EN 60751) and 1 or 2 for thermocouples (60584-1
o.o.accuracy class: A or B for resistance thermometers: (to PN-EN 60751) and 1 or 2 for thermocouples (60584-1
MEASURING INSERT TYPE *)MEASURING INSERT TYPE *)TAB. 1
SENSOR TYPE THERMO-ELECTRODE TYPE OPERATING RANGE [°C]
J Fe - CuNi +20 ÷ 400
T Cu - CuNi -185 ÷ 400
K NiCr - NiAl 0 ÷ 400
*) Tolerance to PN-EN 60584-1, table I, page 63
TRANSMITTER TOLERANCE CLASS AND OPERATING TEMP. RANGE *)
TOLERANCE CLASS FOR FHIN FILM RESISTORS TOLERANCE VALUE **)
AA 0 ÷ +150 ± ( 0.1+0.0017 I t I )
A -30 ÷ +300 ± ( 0.15+0.002 I t I )
B -50 ÷ +400 ± ( 0.3+0.005 I t I )
C -50 ÷ +400 ± ( 0.6+0.01 I t I )
*) to PN-EN60751:2009 **) I t I = temperature in °C no matter what unit (absolute value)
SIINGLE (ONE RESISTOR)
2-WIRE DESIGN 3-WIRE DESIGN 4-WIRE DESIGN
white
red
white
redred
whitewhite
redred
JUNCTION TYPE, CONFIGURATION AND COLOUR MARKINGJUNCTION TYPE, CONFIGURATION AND COLOUR MARKINGTAB. 2
HOT JUNCTION TYPES
HOT JUNCTION CODE DESCRIPTION DRAWING
I1 Simplex insulated junction
Z1 Simplex grounded junction
The sensors can be supplied complete with cables of various design. The following isulation types are available: PCV, PTFE, fiberglass, Kapton or combination of the mentioned mate-rials. Standard cable sections are 0.22mm2 (7/0.2 mm). To choose the right cable, please see table D, page 54.
The most common cables:RTD cables:RS301 - 3x0,22 mm2 – Silicone insulated / 3 wiresRS401 - 4x0,22 mm2 – Silicone insulated/ 4 wiredRW301 - 3x0,22 mm2 – fiberglass insulated/ steel overbraid, 3 wiresRW401 - 4x0,22 mm2 – fiberglass insulated / steel overbraid, 4 wires
Thermocouple cables:S201 - 2x0,22 mm2 – silicone insulatedTW204 - 2x0,22 mm2 – fiberglass insulated / stainless steel overbraid TT201 - 2x0,22 mm2 – Teflon insulatedTT204 - 2x0,22 mm2 - Teflon insulated / stainless steel overbraid
COMPENSATED CONNECTORSTAB. 3
43.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH The sensors can be supplied complete with cables of various design. The following isulation types are available: PCV, PTFE, fiberglass, Kapton or combination of the mentioned mate
CZAH The sensors can be supplied complete with cables of various design. The following isulation types are available: PCV, PTFE, fiberglass, Kapton or combination of the mentioned materials. Standard cable sections are 0.22mm
CZAH rials. Standard cable sections are 0.22mm
The most common cables:
CZAH The most common cables:RTD cables:CZAH RTD cables:RS301 - 3x0,22 mmCZAH
RS301 - 3x0,22 mmRS401 - 4x0,22 mmCZAH
RS401 - 4x0,22 mmRW301 - 3x0,22 mmCZAH
RW301 - 3x0,22 mmCZAH
CZAH COMPENSATED CONNECTORS
CZAH COMPENSATED CONNECTORS
CZAH
CZAH
CZAH
CZAH COMPENSATED CONNECTORS
CZAH COMPENSATED CONNECTORS
CZAH
CZAH
CZAH TAB. 3
CZAH TAB. 3
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR HOT JUNCTION TYPES
POMIAR HOT JUNCTION TYPES
Simplex insulated junction
POMIAR
Simplex insulated junction
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
SIINGLE (ONE RESISTOR)
POMIAR
SIINGLE (ONE RESISTOR)
POMIAR
red POMIAR
red POMIAR
POMIAR
Simplex grounded junction
POMIAR
Simplex grounded junction
Sp.
Sp.
Sp.
Sp. ± ( 0.3+0.005 I t I )
Sp. ± ( 0.3+0.005 I t I )
± ( 0.6+0.01 I t I )
Sp.
± ( 0.6+0.01 I t I )
Sp.
Sp.
Sp.
Sp.
Sp. z z
± ( 0.1+0.0017 I t I )z ± ( 0.1+0.0017 I t I )
± ( 0.15+0.002 I t I )z ± ( 0.15+0.002 I t I )
± ( 0.3+0.005 I t I )z ± ( 0.3+0.005 I t I )
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
TOLERANCE VALUE **) o.o.
TOLERANCE VALUE **)
141212 CABLE THERMOCOUPLES20
20 – K – 2 – TT202 – 2000 – MW1
SENSOR model 20 (thermocouple), type K (NiCi – NiAl). Accuracy class '2', a 2000 mm Teflon insulated lead termi-nated to a miniature pin plug
ORDERING CODE:ORDERING CODE:TAB.
General purpose thermocouples with thermocouple wires in all sorts of insulations. They are made of wires with several sections. Argon welded junction. Available types: K, T, J, N or other on request. � rated up to 400 °C, depending on the insulation material � available in a number of lengths � it can be terminated with a compensating junction (without a pin plug, 10 mm insulated leads)
� class 2 (class 1 only on request, see table I, page 63 for more information)
Give sensor type,table 1 (J,T,K,N)
20sesnsor
typeaccuracy
classlead type
lead lengh (mm)
connector type
Give lead type, table 2
Give lead length [mm]
Give connector type, table 3 (skip if not requested)
Calibration certificate of our Accredited Laboratory upon request CALIBRATION
CERTIFICATE
Give accuracy class, table I, page 63
20 K 2 TT202 2000 MW1
Lp
Lp
Lp
Lp
Lp
Lp
TT202
TT205
TW205
TT206
44. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
Lp
CZAH
Lp
CZAH
Lp
CZAH
Lp
CZAH
CZAH
CZAH
CZAH
CZAH POMIA
R
POMIAR
POMIAR
POMIAR
Give connector type, table 3 (skip if not requested)
POMIAR
Give connector type, table 3 (skip if not requested)
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
TW205POMIAR
TW205
Sp.
Sp.
Sp.
Sp.
Sp. type
Sp. type
Sp.
Sp.
Sp. z z lead lenghz lead lengh
o.o.
General purpose thermocouples with thermocouple wires in all sorts of insulations. They are made of wires with
o.o.
General purpose thermocouples with thermocouple wires in all sorts of insulations. They are made of wires with
it can be terminated with a compensating junction (without a pin plug, 10 mm insulated leads)o.o.it can be terminated with a compensating junction (without a pin plug, 10 mm insulated leads)
TEMPARATURE RANGE *)TEMPARATURE RANGE *)TAB. 1
SENSOR TYPE THERMO-ELECTRODE TYPE OPERATING TEMPERATUR RANGE [°C] *)
J Fe - CuNi +20 ÷ 400
T Cu - CuNi -185 ÷ 400
K NiCr - NiAl 0 ÷ 400
N NiCrSi - NiSi 0 ÷ 400
*) Given temperature ranges are mostly dependent on the outer sheath material. Tolerance to PN-EN 60584-1; table I, page 63
LEAD TYPES *)LEAD TYPES *)TAB. 2
SYMBOL DRAWING SECTION DESCRIPTION
TT202 0,03 mm2 Teflon insulated wires, each 1 mm dia. (with insulation)
TT205 0,2 mm2 Teflon insulated wires Outer Teflon insulation.Lead dimensions 2,5 x 1,5 mm
TT206 0,08 mm2 Teflon insulated wires Outer Teflon insulationlead dimensions1,0 x 1,5 mm
TW205 0,2 mm2 Fiberglass insulated thermocouple wire. Fiberglass outer insulation.
*) Other lead types available on request
If you need a thermocouple compensated pin plug, see table B, page 51 to specify a model, eg. MW1, SW1, MW2 or MW3 etc.
COMPENSATED CONNECTORSCOMPENSATED CONNECTORSTAB. 3
45.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH POMIA
R
POMIAR
POMIAR
POMIAR
POMIAR 0,08 mm
POMIAR 0,08 mm
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
If you need a thermocouple compensated pin plug, see table B, page 51 to specify a model, eg. MW1, SW1, MW2 or MW3 etc.
POMIAR
If you need a thermocouple compensated pin plug, see table B, page 51 to specify a model, eg. MW1, SW1, MW2 or MW3 etc.
POMIAR
POMIAR
COMPENSATED CONNECTORS
POMIAR
COMPENSATED CONNECTORS
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. Teflon insulated wires, each 1 mm dia. (with
Sp. Teflon insulated wires, each 1 mm dia. (with
0,2 mm
Sp.
0,2 mm2
Sp.
2 Teflon insulated wires Outer Teflon insulation.
Sp.
Teflon insulated wires Outer Teflon insulation.Lead dimensions 2,5 x 1,5 mmSp.
Lead dimensions 2,5 x 1,5 mm
z z z z DESCRIPTION
z DESCRIPTION
Teflon insulated wires, each 1 mm dia. (with z Teflon insulated wires, each 1 mm dia. (with insulation)z insulation)
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
DESCRIPTIONo.o.
DESCRIPTION
ORDERING CODE – STRAIGHT THERMOCOUPLEORDERING CODE – STRAIGHT THERMOCOUPLETAB.
Sensors inteded for temperature measurements in the molten metal alloys, eg. aluminium alloy. Tubes are available in a range of materials, eg. SIALON or SiC. SIALON tubes are characterized with the unique combination of physical properties, such as high strength, toughness and excellent thermal shock resistance and resistance to corrosion. Depending on the environment, SIALON can be used be at temperatures up to 1400°C. Standard thermocouples are type K (NiCr-NiAl), simplex or duplex.
21 sensor type accuracy class tube material length Lz tube diameterlength
L1 or L1/L2
head typetemp.
transmitter
Give sensor type and its numbertable 1, eg.1K – simplex2K – duplex
Give accuracy class 1 or 2, table I, page 63
Give tube type
Give length LZ
Give tube diameter, table 2
Give length L1 for straight sensor or length L1/L2 for angle sensor
Give head type, table 3
Give type and range of a transsmitter (if requested), table 4
21 – 1K – 1 – SYL – 765 – 28 – 1500 – NA – SEM206TC, 4 .. 20mA, 0 ... 1200°C
Temp. sensor model 21 (thermocouple), type K, simplex, accuracy class 1, with SIALON protection tube, immersion length LZ=765 mm, outer tube diameter: 28 mm, total length: 1500 mm, sensor fitted with a NA head with trans-mitter type SEM206TC 4 ... 20mA rated from 0 to 1200 °C.
21 1K 1 SYL 765 28 1500 NASEM206TC, 4 ... 20mA
0 ... 1200 °C
1412 THERMOCOUPLES WITH SPECIAL PROTECTION TUBES21
Calibration certificate of our Accredited Laboratory upon request CALIBRATION
CERTIFICATE
Ø
L1
LZ
L2
L1
LZ
Ø
ORDERING CODE – ANGLE THERMOCOUPLEORDERING CODE – ANGLE THERMOCOUPLETAB.
21 – 2K – 1 – SYL – 765 – 28 – 950/500 – NA
Temp. sensor model 21 (thermocouple), type K, duplex, accuracy class 1, with SIALON protection tube, immersion length LZ=765 mm, outer tube diameter: 28 mm, total length: 1500 mm, sensor fitted with a NA head.
21 2K 1 SYL 765 28 950/500 NA -
46. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH Ø
CZAH Ø
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH POMIA
R
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Give tube diameter, table 2
POMIAR
Give tube diameter, table 2
Give length L1 for straight sensor or length L1/L2 for angle sensor
POMIAR
Give length L1 for straight sensor or length L1/L2 for angle sensor
Give head type, table 3
POMIAR
Give head type, table 3
Give type and range of a transsmitter (if requested), table 4
POMIAR
Give type and range of a transsmitter (if requested), table 4
POMIAR
POMIAR
L1
POMIAR
L1
POMIAR
POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp. z z z z
lengthz lengthL z L1 z 1 or Lz or L1z 1/Lz /L2z 2z z o
.o.Sensors inteded for temperature measurements in the molten metal alloys, eg. aluminium alloy. Tubes are available
o.o.
Sensors inteded for temperature measurements in the molten metal alloys, eg. aluminium alloy. Tubes are available in a range of materials, eg. SIALON or SiC. SIALON tubes are characterized with the unique combination of physical
o.o.in a range of materials, eg. SIALON or SiC. SIALON tubes are characterized with the unique combination of physical
properties, such as high strength, toughness and excellent thermal shock resistance and resistance to corrosion.
o.o.properties, such as high strength, toughness and excellent thermal shock resistance and resistance to corrosion.
Depending on the environment, SIALON can be used be at temperatures up to 1400°C. Standard thermocouples are
o.o.Depending on the environment, SIALON can be used be at temperatures up to 1400°C. Standard thermocouples are
o.o.
o.o.
o.o.
PROTECTION TUBE TYPEPROTECTION TUBE TYPETAB. 1
TYPE MATERIAL
SYL Sialon
SIC SiC
TUBE DIAMETER AND LENGTH *) TUBE DIAMETER AND LENGTH *) TAB. 2
DIAMETER LENGTH LZ (FOR GIVEN DIAMETER) AVAILABLE MATERIAL (FOR GIVEN DIAMETER)
Ø22 mm 520 mm SIALON
Ø22 mm 565 mm SIALON
Ø22 mm 635 mm SIALON
Ø22 mm 765 mm SIALON
Ø22 mm 785 mm SIALON
Ø22 mm 865 mm SIALON
Ø22 mm 915 mm SIALON
Ø22 mm 1025 mm SIALON
Ø22 mm 1185 mm SIALON
Ø28 mm 315 mm SIALON
Ø28 mm 565 mm SIALON
Ø28 mm 665 mm SIALON
Ø28 mm 730 mm SIALON
Ø28 mm 815 mm SIALON
Ø28 mm 865 mm SIALON
Ø28 mm 915 mm SIALON
Ø28 mm 1065 mm SIALON
Ø25 mm 500 mm SiC
Ø50 mm 600 mm SiC
Ø50 mm 700 mm SiC
Ø57 mm 910 mm SiC
Ø57 mm 950 mm SiC
*) non-standard diameters and lengths on request
TERMINAL HEAD *)
TYPE B NA DA
ø72 mm
72 mm
ø68,2 mm
73 mm
ø84 mm
90 mm
*) different terminal heads available on request, for technical data see table A, page 50
TERMINAL HEAD TYPETERMINAL HEAD TYPETAB. 3
If the in-head signal tramsmitter is requested e.g. signal 4…20 mA, please give all the necessary details, such as: type, temperature range. List of transmitters is available in the table E, page 60.
TEMPERATURE TRANSMITTERTEMPERATURE TRANSMITTERTAB. 4
47.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH B
CZAH B
ø72 mm
CZAH ø72 mm
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH TERMINAL HEAD TYPE
CZAH TERMINAL HEAD TYPEPOMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
865 mm
POMIAR
865 mm
915 mm
POMIAR
915 mm
1065 mm
POMIAR
1065 mm
500 mm
POMIAR
500 mm
600 mm
POMIAR
600 mm
POMIAR
TERMINAL HEAD TYPEPOMIAR
TERMINAL HEAD TYPE
Sp.
Sp.
Sp.
Sp.
Sp. SIALON
Sp. SIALON
z z SIALON
z SIALON
SIALONz SIALON
SIALONz SIALON
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.AVAILABLE MATERIAL (FOR GIVEN DIAMETER)
o.o.AVAILABLE MATERIAL (FOR GIVEN DIAMETER)
ORDERING CODE:ORDERING CODE:TAB.
Extension cables are intended to facilitate the installation of temperature sensors. They are practical for use and eliminate carring several meters of wire each time. For example you can have a hand held thermocouple connected to the previously placed extension cable.
The extension cables are available in many construction types, eg. they can be fitted with a miniature pin plug at one end and with a standard pin plug at the other end. Below listed extension cables can also be made as MI leads. For more information, please contact the Sales Department.
22 termination 1 cable type cable length termination 2
Give termination 1, see table 1 (if not requested, write 'WK' for bare end) for a pin plug, specify a type: J, K, N, R or S for thermocouples and RTD for resistance thermometers
Give cable type, table 2
Give cable length [mm], for coiled cables write 0
Give termination 2, table 1 (if not requested, write WK for bare ends). for a pin plug, specify a type: J, K, N, R or S for thermo-couples and RTD for resistance thermometers
22 – MW1K – TS201 – 3000 – SG1K
Extention cable model 22 (thermocouple) terminated with a miniature plug at one end and with a standard jack type K at the other end. Terminals connected by a cable type TS201: Silicone insulated thermocouple wire 2x0,22 mm2, length Lp=3000 mm.
22 MW1K TS201 3000 SG1K
1412EXTENSION CABLES FOR RESISTANCE THERMOMETERS AND THERMOCOUPLES22
ORDERING CODE:ORDERING CODE:TAB.
22 – MW3RTD – SPRR – 0 – MG3RTD
Extention cable model 22 (RTD) terminated with a miniature 4-pin plug at one end and with a miniature 3-pin jack at the other end. Terminals connected by a coiled lead.
22 MW3RTD SPRR 0 MG3RTD
ORDERING CODE:ORDERING CODE:TAB.
22 – MW3RTD – RW401 – 10000 – WK
Extention cable model 22 (RTD) terminated with a miniature 4-pin plug at one end and insulated bare ends at the other end. Cable type RW401 4x0.22 mm2 fiberglass insulated with a stainless steel overbraid, length Lp=10000 mm.
22 MW3RTD RW401 10000 WK
Give termination 1, see table 1 (if not requested, write 'WK' for bare end) for a pin plug, specify a type: J, K, N, R or S for thermocouples and RTD for resistance thermometers
Give cable type, table 2
Give cable length [mm], for coiled cables write 0
Give termination 2, table 1 (if not requested, write WK for bare ends). for a pin plug, specify a type: J, K, N, R or S for thermocouples and RTD for resistance thermometers L
L=15
00 m
m (w
hen
stre
tche
d)
L=15
00 m
m (w
hen
stre
tche
d)
48. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH
CZAH
CZAH POMIA
R
POMIAR
ORDERING CODE:
POMIAR
ORDERING CODE:
POMIAR
POMIAR
ORDERING CODE:
POMIAR
ORDERING CODE:
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR Give cable length [mm], for coiled cables write 0
POMIAR Give cable length [mm], for coiled cables write 0
Give termination 2, table 1 (if not requested, write WK for bare ends). for a pin plug, specify a type: J, K, N, R or S for thermo
POMIAR
Give termination 2, table 1 (if not requested, write WK for bare ends). for a pin plug, specify a type: J, K, N, R or S for thermocouples and RTD for resistance thermometers
POMIAR
couples and RTD for resistance thermometers
22 – MW1K – TS201 – 3000 – SG1K
POMIAR
22 – MW1K – TS201 – 3000 – SG1K
Extention cable model 22 (thermocouple) terminated with a miniature plug at one end and with a standard jack type
POMIAR
Extention cable model 22 (thermocouple) terminated with a miniature plug at one end and with a standard jack type K at the other end. Terminals connected by a cable type TS201: Silicone insulated thermocouple wire 2x0,22 mm2,
POMIAR
K at the other end. Terminals connected by a cable type TS201: Silicone insulated thermocouple wire 2x0,22 mm2, length Lp=3000 mm. POMIA
R
length Lp=3000 mm. POMIAR
POMIAR
POMIAR
POMIAR
22
POMIAR
22 MW1K
POMIAR
MW1K
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR S
p.
Sp.
Sp.
Sp. z z z z cable length z cable length
o.o.
Extension cables are intended to facilitate the installation of temperature sensors. They are practical for use and
o.o.
Extension cables are intended to facilitate the installation of temperature sensors. They are practical for use and eliminate carring several meters of wire each time. For example you can have a hand held thermocouple connected
o.o.eliminate carring several meters of wire each time. For example you can have a hand held thermocouple connected
The extension cables are available in many construction types, eg. they can be fitted with a miniature pin plug at one
o.o.The extension cables are available in many construction types, eg. they can be fitted with a miniature pin plug at one
end and with a standard pin plug at the other end. Below listed extension cables can also be made as MI leads. For o.o.end and with a standard pin plug at the other end. Below listed extension cables can also be made as MI leads. For o.o.
TERMINAL CONNECTORSTERMINAL CONNECTORSTAB. 1
LEAD WIRESLEAD WIRESTAB. 2
TYPE COMPENSATED CONNECTOR - PLUG
SW1 to 220 °C
2 pins
SW2 to 220 °C
3 pins
SW3 to 220 °C
4 pins
MW1 to 220 °C
2 pins
MW2 to 220 °C
3 pins
MW3 to 220 °C
4 pins
The sensors can be supplied complete with cables of various design. The following isulation types are available: PCV, PTFE, fiberglass, Kapton or combination of the mentioned mate-rials. Standards cable sections are 0.22mm2 (7/0.2 mm). To choose the right cable, please see table D, page 54.
The most common cables:
thermocouple: SPRT – 2x0.22 mm2 – coiled lead (extended length is 1500 mm) TS201 - 2x0,22 mm2 – silicone insulatedTW204 - 2x0,22 mm2 – fiberglass insulated / stainless steel overbraid TT201 - 2x0,22 mm2 – Teflon insulatedTT204 - 2x0,22 mm2 - Teflon insulated / stainless steel overbraid
RTD cables:SPRR – 3 lub 4x0,22 mm2 – coiled lead (extended length is 1500 mm) RS301 - 3x0,22 mm2 – Silicone insulated / 3 wiresRS401 - 4x0,22 mm2 – Silicone insulated/ 4 wiredRW301 - 3x0,22 mm2 – fiberglass insulated/ steel overbraid, 3 wiresRW401 - 4x0,22 mm2 – fiberglass insulated / steel overbraid, 4 wires
TYPE COMPENSATED CONNECTOR – JACK
SG1 to 220 °C
2 pins
SG2 to 220 °C
3 pins
SG3 to 220 °C
4 pins
MG1 to 220 °C
2 pins
MG2 to 220 °C
3 pins
MG3 to 220 °C
4 pins
49.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
CZAH – coiled lead (extended length is 1500 mm)
CZAH – coiled lead (extended length is 1500 mm) – silicone insulated
CZAH – silicone insulatedTW204 - 2x0,22 mm
CZAH TW204 - 2x0,22 mm2
CZAH 2 – fiberglass insulated / stainless steel overbraid
CZAH – fiberglass insulated / stainless steel overbraid
TT201 - 2x0,22 mm
CZAH TT201 - 2x0,22 mm2
CZAH 2 – Teflon insulated
CZAH – Teflon insulated
TT204 - 2x0,22 mm
CZAH TT204 - 2x0,22 mm2
CZAH 2 - Teflon insulated / stainless steel overbraid
CZAH - Teflon insulated / stainless steel overbraid
RTD cables:
CZAH RTD cables:SPRR – 3 lub 4x0,22 mm
CZAH SPRR – 3 lub 4x0,22 mmRS301 - 3x0,22 mm
CZAH RS301 - 3x0,22 mmRS401 - 4x0,22 mm
CZAH RS401 - 4x0,22 mmRW301 - 3x0,22 mmCZAH RW301 - 3x0,22 mmRW401 - 4x0,22 mmCZAH
RW401 - 4x0,22 mmCZAH POMIA
R
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
The sensors can be supplied complete with cables of various design. The following isulation types are available: PCV, PTFE, fiberglass, Kapton or combination of the mentioned mate
POMIAR
The sensors can be supplied complete with cables of various design. The following isulation types are available: PCV, PTFE, fiberglass, Kapton or combination of the mentioned materials. Standards cable sections are 0.22mm2 (7/0.2 mm). To choose the right cable, please see table D, page 54.
POMIAR
rials. Standards cable sections are 0.22mm2 (7/0.2 mm). To choose the right cable, please see table D, page 54.
– coiled lead (extended length is 1500 mm) POMIAR
– coiled lead (extended length is 1500 mm) POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR to 220 °C
POMIAR to 220 °C
3 pins
POMIAR 3 pins
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. z z z z z
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
50. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
TYPE B NA MA G1
MATERIAL Aluminium Aluminium Aluminium Aluminium
HEAD
DIMEN-SIONS
Ø72
~72
~50
Ø69~
7341
.5Ø48.8
~52
~29
Ø82
~87
50
TYPE G2 DA TL TS
MATERIAL Aluminium Aluminium Aluminium Aluminium
HEAD
DIMEN-SIONS
Ø60
~64
~38
Ø83
~10
0
~55
.5 ~67
~17
Ø30
10
~58
~14
Ø197
TYPE SEG KNN DANAW DANA
MATERIAL Stainless Steel 316 Plastic Aluminium Aluminium
HEAD
DIMEN-SIONS
~70
.5
50
Ø58 Ø82
~87
50
Ø83
~11
441
.5
Ø83
~83
41.5
HEADSHEADSTAB. A
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH SEG
CZAH SEG
Stainless Steel 316
CZAH Stainless Steel 316
HEAD
CZAH HEAD
CZAH POMIA
R
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Ø83
POMIAR
Ø83
~10
0
POMIAR
~10
0
~55
.5
POMIAR
~55
.5
POMIAR
POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
TL
Sp.
TL
AluminiumSp.
AluminiumSp. z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z ~
87 z ~87
50z 50
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
Ø82o.o.
Ø82
51.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
MINIATURE CONNECTORS
plug: MW1 jack: MG1temperature rating: 200 °C max.eg plug MW1-K or jack MG1-K
Connector with protection against accidental disconnection
plug: MW6 jack: MG6temperature rating: 200 °C max.eg. plug MW6-K or jack MG6-K
plug and jacket suit to MW1 i MG1
For high temp.wtyk: MW10 jack: MG10
temperature rating: 350 °C max.eg. plug MW10-J or jack MG10-J
Ceramicplug: MW100 jack: MG100
temperature rating: 650 °C max.eg plug: Mw100-R or jacket MG1000-R
With the additional ground pinplug: MW2 jack: MG2
max. temp. pracy: 200 °Ctemperature rating: 200 °C max.
for 3-wire RTD sensors or grounded thermocouples
Duplexplug: MW3 jack: MG3
temperature rating: 200 °C max.for two-circuit thermocouple
or 4-wire RTD-‘s.
jack: MG4temperature rating: 200 °C max.
Entrance hole Ø17,5mm jack: MG5
temperature rating: 200 °C max
Multiple pin jack, 3 thermocouple and RTD circuit
jack: MG7temperature rating: 200 °C max.
*) in thermocouples: the 3rd circuit is, e.g. for screen connection
Panel jack for a plug type MW6jack: MG8
temperature rating: 200 °C max.
Compensated connectors and accessories – colour marking according to IEC. Available for sensor types J, K, N, E, T, R/S, B and RTD.
STANDARD CONNECTORS
plug: SW1 jack: SG1temperature rating: 200 °C max.eg. plug SW1-K or jack: SG1-K
No standard version
For high temp.plug: SW10 jack: SG10
temperature rating: 350 °C max.eg. plug SW10-J or jack: SG10-J
Ceramicplug: SW100 jack: SG100
temperature rating: 650 °C max.eg. plug SW100-S or jack: SG100-S
With the additional ground pinplug: SW2 jack: SG2
temperature rating: 200 °C max.for 3-wire RTD sensors or grounded thermocouples
Duplexplug: SW3 jack: SG3
temperature rating: 200 °C max.for two-circuit thermocouple
or 4-wire RTD-‘s.
jack: SG4temperature rating: 200 °C max.
Entrance hole Ø27 mm jack: SG5
temperature rating: 200 °C max.
Multiple pin jack, 3 thermocouple and RTD circuit
jack: SG7temperature rating: 200 °C max.
*) in thermocouples: the 3rd circuit is, e.g. for screen connection
No standard version
SW1
SG1
SW10
SG10
SW100
SG100
SW2
SG2
SW3
SG3
SG4
SG5
SG7
MW1
MG1
MW10
MG10
MW100
MG100
MW2
MG2
MW3
MG3
MG4
MG5
MG7
MG6
MW6
MG8
Ordering code: eg. SW1 - K or MWL – J etc.
COMPENSATED CONNECTORSCOMPENSATED CONNECTORSTAB. B
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH SG5
CZAH SG5SG5
CZAH SG5
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
plug: SW3 jack: SG3
POMIAR
plug: SW3 jack: SG3temperature rating: 200 °C max.
POMIAR
temperature rating: 200 °C max.for two-circuit thermocouple
POMIAR
for two-circuit thermocouple or 4-wire RTD-‘s.
POMIAR
or 4-wire RTD-‘s.
jack: SG4POMIAR
jack: SG4temperature rating: 200 °C max.POMIA
R
temperature rating: 200 °C max.
MW100
POMIAR MW100
MG2
POMIAR MG2
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. temperature rating: 350 °C max.
Sp. temperature rating: 350 °C max.
eg. plug MW10-J or jack MG10-J
Sp. eg. plug MW10-J or jack MG10-J
Sp.
plug: MW100 jack: MG100Sp.
plug: MW100 jack: MG100temperature rating: 650 °C max.Sp.
temperature rating: 650 °C max.eg plug: Mw100-R or jacket MG1000-RSp.
eg plug: Mw100-R or jacket MG1000-RSp. z For high temp.z For high temp.
wtyk: MW10 jack: MG10z wtyk: MW10 jack: MG10temperature rating: 350 °C max.z temperature rating: 350 °C max.eg. plug MW10-J or jack MG10-Jz eg. plug MW10-J or jack MG10-J
o.o.
o.o.
o.o.
o.o.
o.o.against accidental disconnection
o.o.against accidental disconnection
plug: MW6 jack: MG6
o.o.plug: MW6 jack: MG6
temperature rating: 200 °C max.o.o.temperature rating: 200 °C max.
eg. plug MW6-K or jack MG6-Ko.o.
eg. plug MW6-K or jack MG6-Kplug and jacket suit to MW1 i MG1o.
o.plug and jacket suit to MW1 i MG1
52. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
STANDARD ACCESSORIES
Grommet preventing moisture and dirt from entering the connector and protecting the wire against strain
relief. Max 200 °C
SD1
Rubber insert providing bending protection for wires Max. 200 °C
SD2
Wire insert without any protruding parts from the connector
SD3
Silicobe rubber protection boot to cover the plug and the jack to prevent moisture and dirt from entering the connector. Tapered entrance hole to suit the
most cable diameters. SO
Locking plate to protect against accidental discon-nection
SZsuitable for connector protection
eg. SW1 with SG1
Crimp insert designed for crimping on mineral insula-ted cable or crimping on a tube.
STfor: Ø1mm – ST10
for: Ø1,5mm – ST15for: Ø2mm – ST20for: Ø3mm – ST30
for: Ø4,5mm – ST45for: Ø6mm – ST60
Wire clampbracket will provide optimum strainrelief. Construction allows a large diffenrence in maximum and minimum wire diameter. All parts are stainless
steel.
SU fits: SW1, SG1, SW10, SG10, SW2, SG2
SU1 fits: SW100, SG100,
SU2 fits: SW3, SG3
MINIATURE ACCESSORIES
Grommet preventing moisture and dirt from entering the connector and protecting the wire against strain
relief. Max 200 °C
MD1
Rubber insert providing bending protection for wires Max. 200 °C
MD2
Wire insert without any protruding parts from the connector
MD3
Silicobe rubber protection boot to cover the plug and the jack to prevent moisture and dirt from entering the connector. Tapered entrance hole to suit the
most cable diameters. MO
Locking plate to protect against accidental discon-nection
MZsuitable for connector protection
eg. MW1 with MG1
Crimp insert designed for crimping on mineral insula-ted cable or crimping on a tube.
MTfor: Ø0,5mm – MT05for: Ø1mm – MT10
for: Ø1,5mm – MT15for: Ø2mm – MT20for: Ø3mm – MT30
Wire clampbracket will provide optimum strainrelief. Construction allows a large diffenrence in maximum and minimum wire diameter. All parts are stainless
steel. MU
fits: MW1, MG1, MW10, MG10, MW2, MG2MU1
fits: MW100, MG100,
MU2 fits: MW3, MG3
SD1
SD2
SD3
SO
SZ
ST
SU
MD1
MD2
MD3
MO
MZ
MT
MU
ACCESSORIESACCESSORIESTAB. B
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH Crimp insert designed for crimping on mineral insula
CZAH Crimp insert designed for crimping on mineral insula
STCZAH ST
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Silicobe rubber protection boot to cover the plug and
POMIAR
Silicobe rubber protection boot to cover the plug and the jack to prevent moisture and dirt from entering
POMIAR
the jack to prevent moisture and dirt from entering the connector. Tapered entrance hole to suit the
POMIAR
the connector. Tapered entrance hole to suit the
Locking plate to protect against accidental discon
POMIAR
Locking plate to protect against accidental disconnection
POMIAR
nection
SZPOMIAR
SZsuitable for connector protection POMIA
R
suitable for connector protection eg. SW1 with SG1POMIA
R
eg. SW1 with SG1POMIAR
POMIAR
POMIAR
POMIAR
POMIAR MD3
POMIAR MD3 Sp.
Sp.
Sp.
Sp.
Wire insert without any protruding parts from the
Sp.
Wire insert without any protruding parts from the
z MD2z MD2 o.o.
o.o.
o.o.
o.o.
o.o.
Rubber insert providing bending protection for wires o.o.
Rubber insert providing bending protection for wires Max. 200 °C o.
o.Max. 200 °C
53.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
TYPE COMPENSATING THERMOCOUPLEEU
IEC 584-3D
DIN 43714GB
BS 1843F
NFC 42-324
USAANSI/MC
96-1
T TX
J JX
E EX
K KX
K KCA
K KCB
N NX
R RCA/RCB
S SCA/SCB
B BC
CABLE MARKINGCABLE MARKINGTAB. B
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH R
CZAH R RCA/RCB
CZAH RCA/RCB
SCZAH
S
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z z
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
54. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
GEN
ERA
L IN
FORM
ATIO
NCO
NST
RUCT
ION
GEN
ERA
L DA
TA
INSU
LATI
ON 2)
CO
NST
RUCT
ION
PRODUCT CODE
SECTION (mm2)
SOLID/STRANDED
NUMBER OF CONDUCTORS
INSULATION 2)
SCREEN
OUTER INSULATION 2)
OPERATING TEMPERATURE (0C)
COLOUR CODING
MECHANICAL RESISTANCE
MOISTURERESISTANCE
DIAMETER/ DIMENSIONS (mm) 1)
RTD
CABL
ES
Silic
one
Copp
er w
ires.
Sili
cone
rubb
er in
sula
ted
cond
ucto
rs.
Silic
one
rubb
er s
heat
hed
over
all.
RS30
10,
22L
3Si
licon
eN
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
3,6
Silic
one
Copp
er w
ires.
Sili
cone
rubb
er in
sula
ted
cond
ucto
rs.
Silic
one
rubb
er s
heat
hed
over
all.
RS20
11,
5L
2Si
licon
eN
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
8
Silic
one
Copp
er w
ires.
Sili
cone
rubb
er in
sula
ted
cond
ucto
rs.
Silic
one
rubb
er s
heat
hed
over
all.
RS40
10,
22L
4Si
licon
eN
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
4,0
Silic
one
Copp
er w
ires.
Tef
lon
insu
late
d co
nduc
tors
.Si
licon
e ru
bber
she
athe
d ov
eral
l. RS
302
0,22
L3
Teflo
n®N
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
2,9
Silic
one
Copp
er w
ires.
Tef
lon
insu
late
d co
nduc
tors
.Si
licon
e ru
bber
she
athe
d ov
eral
l. RS
402
0,22
L4
Teflo
n®N
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
3,0
Silic
one
Copp
er w
ires.
Tef
lon
insu
late
d co
nduc
tors
.Si
licon
e ru
bber
she
athe
d ov
eral
l. RS
303
1,0
L3
Silic
one
No
Silic
one
-50.
.. +
200
Yes
Good
Very
Go
od7,
0
Teflo
n®Co
pper
wire
s. T
eflo
n in
sula
ted
cond
ucto
rs. S
reen
ed.
Teflo
n ou
ter i
nsul
atio
n.RT
301
0,22
L3
Teflo
n®N
oTe
flon®
-75.
.. +
250
Yes
Very
Go
odVe
ry
Good
3,0
Teflo
n®Co
pper
wire
s. T
eflo
n in
sula
ted
cond
ucto
rs. S
reen
ed.
Teflo
n ou
ter i
nsul
atio
n.RT
401
0,22
L4
Teflo
n®N
oTe
flon®
-75.
.. +
250
Yes
Very
Go
odVe
ry
Good
3,2
Teflo
n®Co
pper
wire
s. T
eflo
n in
sula
ted
cond
ucto
rs. T
eflo
n ou
ter i
nsul
atio
n.
Stai
nles
s st
eel o
verb
raid
.RT
302
0,22
L3
Teflo
n®N
oTe
flon®
/st
eel b
raid
-75.
.. +
250
Yes
Very
Go
odVe
ry
Good
3,0
Teflo
n®Co
pper
wire
s. T
eflo
n in
sula
ted
cond
ucto
rs. T
eflo
n ou
ter i
nsul
atio
n.
Stai
nles
s st
eel o
verb
raid
.RT
402
0,22
L4
Teflo
n®N
oTe
flon®
/st
eel b
raid
-75.
.. +
250
Yes
Very
Go
odVe
ry
Good
3,2
CABLESCABLESTAB. D
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CON
STRU
CTIO
N
CZAH
CON
STRU
CTIO
N POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Copp
er w
ires.
Sili
cone
rubb
er in
sula
ted
cond
ucto
rs.
POMIAR
Copp
er w
ires.
Sili
cone
rubb
er in
sula
ted
cond
ucto
rs.
Silic
one
rubb
er s
heat
hed
over
all.
POMIAR
Silic
one
rubb
er s
heat
hed
over
all.
Copp
er w
ires.
Sili
cone
rubb
er in
sula
ted
cond
ucto
rs.
POMIAR
Copp
er w
ires.
Sili
cone
rubb
er in
sula
ted
cond
ucto
rs.
Silic
one
rubb
er s
heat
hed
over
all.
POMIAR
Silic
one
rubb
er s
heat
hed
over
all.
Copp
er w
ires.
Sili
cone
rubb
er in
sula
ted
cond
ucto
rs.
POMIAR
Copp
er w
ires.
Sili
cone
rubb
er in
sula
ted
cond
ucto
rs.
Silic
one
rubb
er s
heat
hed
over
all.
POMIAR
Silic
one
rubb
er s
heat
hed
over
all.
Copp
er w
ires.
Tef
lon
insu
late
d co
nduc
tors
.
POMIAR
Copp
er w
ires.
Tef
lon
insu
late
d co
nduc
tors
.RS
302
POMIAR
RS30
2
RS40
2
POMIAR
RS40
20,
22
POMIAR 0,
22
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
LSp.
L3Sp.
3
LSp.
L3Sp.
3Te
flon®
Sp.
Teflo
n®N
o
Sp. N
o
Teflo
n®
Sp.
Teflo
n®
z z z z z z z No z No
Teflo
n®
z Teflo
n® o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
Teflo
n® / o.
o.
Teflo
n® /
stee
l bra
ido.o.
stee
l bra
id+
250
o.o.
+25
0
-75.
..
o.o.-7
5...
+25
0
o.o.
+25
0Ye
s
o.o.Ye
s
55.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
Teflo
n®Co
pper
wire
s. T
eflo
n in
sula
ted
cond
ucto
rs. O
uter
Tef
lon
insu
latio
n.
Oute
r sta
inle
ss s
teel
ove
rbra
id.
RT20
3
2x7/0,18
L2
Teflo
n®N
oTe
flon®
/st
eel b
raid
-75.
.. +
250
Yes
Very
Go
odVe
ry
Good
2x3
Teflo
n®Co
pper
wire
s. T
eflo
n in
sula
ted
cond
ucto
rs. O
uter
Tef
lon
insu
latio
n.
RT20
40,
22L
2Te
flon®
No
Teflo
n®+
250
Yes
Very
Go
odVe
ry
Good
1,07x1,73
Teflo
n®Co
pper
wire
s. T
eflo
n in
sula
ted
cond
ucto
rs. O
uter
Tef
lon
insu
latio
n.
RT40
40,
22L
4Te
flon®
No
Teflo
n®+
250
Yes
Very
Go
odVe
ry
Good
2,1
Teflo
n®Co
pper
wire
s. T
eflo
n in
sula
ted
cond
ucto
rs. O
uter
Tef
lon
insu
latio
n.
RT40
50,
05L
4Te
flon®
No
Teflo
n® /
stee
l bra
id-7
5...
+25
0Ye
sVe
ry
Good
Very
Go
od2,
6
Teflo
n®Co
pper
wire
s. T
eflo
n in
sula
ted
cond
ucto
rs. O
uter
Tef
lon
insu
latio
n.RT
406
0,22
L4
Teflo
n®N
oTe
flon®
+25
0Ye
sVe
ry
Good
Very
Go
od3,
0
Fibe
rgla
ssCo
pper
wire
s. F
iber
glas
s in
sula
ted
cond
ucto
rs. O
uter
fibe
rgla
ss
insu
latio
n.
Oute
r sta
inle
ss s
teel
ove
rbra
id.
RW30
10,
22L
3Fi
berg
lass
No
Fibe
rgla
ss
/ ste
el
brai
d+
400
Yes
Good
Wea
k3,
2
Fibe
rgla
ssCo
pper
wire
s. F
iber
glas
s in
sula
ted
cond
ucto
rs. O
uter
fibe
rgla
ss
insu
latio
n.
Oute
r sta
inle
ss s
teel
ove
rbra
id.
RW40
10,
22L
4Fi
berg
lass
No
Fibe
rgla
ss
/ ste
el
brai
d+
400
Yes
Good
Wea
k3,
5
Fibe
rgla
ssCo
pper
wire
s. F
iber
glas
s in
sula
ted
cond
ucto
rs. O
uter
fibe
rgla
ss
insu
latio
n.
RW20
20,
22L
2Fi
berg
lass
No
Fibe
rgla
ss+
400
Yes
Good
Wea
k1,
5x2,
5
Fibe
rgla
ssCo
pper
wire
s. F
iber
glas
s in
sula
ted
cond
ucto
rs. O
uter
fibe
rgla
ss
insu
latio
n.
RW20
30,
22L
2Fi
berg
lass
No
Fibe
rgla
ss+
480
Yes
Good
Wea
k
1,52x1,32
Fibe
rgla
ssCo
pper
wire
s. F
iber
glas
s in
sula
ted
cond
ucto
rs. O
uter
fibe
rgla
ss
insu
latio
n.
RW40
30,
22L
4Fi
berg
lass
No
Fibe
rgla
ss+
480
Yes
Good
Wea
k
1,52x1,66
Fibe
rgla
ssCo
pper
wire
s. F
iber
glas
s in
sula
ted
cond
ucto
rs. O
uter
fibe
rgla
ss
insu
latio
n.
Oute
r cop
per o
verb
raid
. RW
204
0,22
L2
Fibe
rgla
ssN
oFi
berg
lass
+40
0Ye
sGo
odW
eak
2,8
Kapt
on®
Copp
er w
ires.
KAP
TON
insu
late
d co
nduc
tors
. Ou
ter K
APTO
N ov
erbr
aid.
RK
402
0,22
L4
Kapt
on®
No
Kapt
on®
-75.
.. +
350
No
Very
Go
odVe
ry
Good
2,1
Kapt
on®
Sing
le c
oppe
r con
duct
or in
KAP
TON
insu
lata
tion.
RK
103
0,22
L1
Kapt
on®
No
—-7
5...
+35
0N
oVe
ry
Good
Very
Go
od0,
9
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
Copp
er w
ires.
Tef
lon
insu
late
d co
nduc
tors
. Out
er T
eflo
n in
sula
tion.
CZAH
Copp
er w
ires.
Tef
lon
insu
late
d co
nduc
tors
. Out
er T
eflo
n in
sula
tion.
CZAH
CZAH
CZAH
CZAH
Copp
er w
ires.
Tef
lon
insu
late
d co
nduc
tors
. Out
er T
eflo
n in
sula
tion.
CZAH
Copp
er w
ires.
Tef
lon
insu
late
d co
nduc
tors
. Out
er T
eflo
n in
sula
tion.
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Copp
er w
ires.
Tef
lon
insu
late
d co
nduc
tors
. Out
er T
eflo
n in
sula
tion.
POMIAR
Copp
er w
ires.
Tef
lon
insu
late
d co
nduc
tors
. Out
er T
eflo
n in
sula
tion.
Copp
er w
ires.
Tef
lon
insu
late
d co
nduc
tors
. Out
er T
eflo
n in
sula
tion.
POMIAR
Copp
er w
ires.
Tef
lon
insu
late
d co
nduc
tors
. Out
er T
eflo
n in
sula
tion.
Copp
er w
ires.
Fib
ergl
ass
insu
late
d co
nduc
tors
. Out
er fi
berg
lass
POMIAR
Copp
er w
ires.
Fib
ergl
ass
insu
late
d co
nduc
tors
. Out
er fi
berg
lass
in
sula
tion.
POMIAR
insu
latio
n.
Oute
r sta
inle
ss s
teel
ove
rbra
id.
POMIAR
Oute
r sta
inle
ss s
teel
ove
rbra
id.
Copp
er w
ires.
Fib
ergl
ass
insu
late
d co
nduc
tors
. Out
er fi
berg
lass
POMIAR
Copp
er w
ires.
Fib
ergl
ass
insu
late
d co
nduc
tors
. Out
er fi
berg
lass
RW
401
POMIAR
RW40
1
RW20
2
POMIAR
RW20
20,
22
POMIAR 0,
22
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
LSp.
L2Sp.
2
Fibe
rgla
ss
Sp.
Fibe
rgla
ss
LSp.
L4Sp.
4Fi
berg
lass
Sp.
Fibe
rgla
ss
Fibe
rgla
ss
Sp.
Fibe
rgla
ss
z z z z z z No z No
Fibe
rgla
ss
z Fibe
rgla
ss o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
Kapt
on® o.
o.
Kapt
on®
+35
0
o.o.
+35
0
-75.
..
o.o.-7
5...
+35
0
o.o.
+35
0N
o
o.o.N
o
56. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
GEN
ERA
L IN
FORM
ATIO
NCO
NST
RUCT
ION
GEN
ERA
L DA
TA
INSU
LATI
ON 2)
CO
NST
RUCT
ION
PRODUCT CODE
SECTION (mm2)
SOLID/STRANDED
NUMBER OF CONDUCTORS
INSULATION 2)
SCREEN
OUTER INSULATION 2)
OPERATING TEMPERATURE (0C)
COLOUR CODING
MECHANICAL RESISTANCE
MOISTURERESISTANCE
DIAMETER/ DIMENSIONS (mm) 1)
RTD
CABL
ES
Kapt
on®
Sing
le c
oppe
r con
duct
or in
KAP
TON
insu
lata
tion.
RK
104
0,07
D1
Kapt
on®
No
—-7
5...
+35
0N
oVe
ry
Good
Very
Go
od0,
5
PCV
Drut
y m
iedz
iane
. Pos
zcze
góln
e ży
ły w
izol
acji
z PVC
. Prz
ewód
ek
rano
wan
y. Iz
olac
ja ze
wnę
trzn
a PV
C.RP
301
0,25
L3
PCV
Yes
PCV
-30.
.. +
105
Yes
Good
Very
Go
od4,
0
PCV
Drut
y m
iedz
iane
. Pos
zcze
góln
e ży
ły w
izol
acji
z PVC
. Prz
ewód
ek
rano
wan
y. Iz
olac
ja ze
wnę
trzn
a PV
C.RP
302
0,5
L3
PCV
Yes
PCV
-30.
.. +
105
Yes
Good
Very
Go
od5,
5
THER
MOC
OUPL
E CA
BLES
Silic
one
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.Si
licon
e in
sula
ted
cond
ucto
rs. O
uter
sili
cone
insu
latio
n.
TS20
10,
22L
2Si
licon
eN
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
3,8
Silic
one
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.Si
licon
e in
sula
ted
cond
ucto
rs. O
uter
sili
cone
insu
latio
n.
TS40
10,
22L
4Si
licon
eN
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
4,4
Silic
one
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.Si
licon
e in
sula
ted
cond
ucto
rs. O
uter
sili
cone
insu
latio
n.
TS20
20,
5L
2Si
licon
eN
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
5,0
Silic
one
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.Si
licon
e in
sula
ted
cond
ucto
rs. O
uter
sili
cone
insu
latio
n.
TS40
20,
5L
4Si
licon
eN
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
5,0
Silic
one
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.Si
licon
e in
sula
ted
cond
ucto
rs. O
uter
sili
cone
insu
latio
n.
TS20
30,
75L
2Si
licon
eN
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
6,2
Silic
one
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.Si
licon
e in
sula
ted
cond
ucto
rs. O
uter
sili
cone
insu
latio
n.
TS20
41,
0L
2Si
licon
eN
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
6,2
CABLESCABLESTAB. D
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CON
STRU
CTIO
N
CZAH
CON
STRU
CTIO
N POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Sing
le c
oppe
r con
duct
or in
KAP
TON
insu
lata
tion.
POMIAR
Sing
le c
oppe
r con
duct
or in
KAP
TON
insu
lata
tion.
Drut
y m
iedz
iane
. Pos
zcze
góln
e ży
ły w
izol
acji
z PVC
. Prz
ewód
POMIAR
Drut
y m
iedz
iane
. Pos
zcze
góln
e ży
ły w
izol
acji
z PVC
. Prz
ewód
ek
rano
wan
y. Iz
olac
ja ze
wnę
trzn
a PV
C.
POMIAR
ekra
now
any.
Izol
acja
zew
nętr
zna
PVC.
Drut
y m
iedz
iane
. Pos
zcze
góln
e ży
ły w
izol
acji
z PVC
. Prz
ewód
POMIAR
Drut
y m
iedz
iane
. Pos
zcze
góln
e ży
ły w
izol
acji
z PVC
. Prz
ewód
ek
rano
wan
y. Iz
olac
ja ze
wnę
trzn
a PV
C.
POMIAR
ekra
now
any.
Izol
acja
zew
nętr
zna
PVC. TH
ERM
OCOU
PLE
CABL
ES
POMIAR
THER
MOC
OUPL
E CA
BLES
TS20
1
POMIAR
TS20
10,
22
POMIAR 0,
22
0,22
POMIAR 0,22 S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
L Sp.
L4 Sp.
4
LSp.
L2Sp.
2Si
licon
e
Sp.
Silic
one
4Sp.
4Si
licon
e
Sp.
Silic
one
z z z z z z z Noz No
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
Silic
oneo.
o.
Silic
one
-50.
..
o.o.-5
0...
+20
0
o.o.
+20
0
57.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
GEN
ERA
L IN
FORM
ATIO
NCO
NST
RUCT
ION
GEN
ERA
L DA
TA
INSU
LATI
ON 2)
CO
NST
RUCT
ION
PRODUCT CODE
SECTION (mm2)
SOLID/STRANDED
NUMBER OF CONDUCTORS
INSULATION 2)
SCREEN
OUTER INSULATION 2)
OPERATING TEMPERATURE (0C)
COLOUR CODING
MECHANICAL RESISTANCE
MOISTURERESISTANCE
DIAMETER/ DIMENSIONS (mm) 1)
RTD
CABL
ES
Kapt
on®
Sing
le c
oppe
r con
duct
or in
KAP
TON
insu
lata
tion.
RK
104
0,07
D1
Kapt
on®
No
—-7
5...
+35
0N
oVe
ry
Good
Very
Go
od0,
5
PCV
Drut
y m
iedz
iane
. Pos
zcze
góln
e ży
ły w
izol
acji
z PVC
. Prz
ewód
ek
rano
wan
y. Iz
olac
ja ze
wnę
trzn
a PV
C.RP
301
0,25
L3
PCV
Yes
PCV
-30.
.. +
105
Yes
Good
Very
Go
od4,
0
PCV
Drut
y m
iedz
iane
. Pos
zcze
góln
e ży
ły w
izol
acji
z PVC
. Prz
ewód
ek
rano
wan
y. Iz
olac
ja ze
wnę
trzn
a PV
C.RP
302
0,5
L3
PCV
Yes
PCV
-30.
.. +
105
Yes
Good
Very
Go
od5,
5
THER
MOC
OUPL
E CA
BLES
Silic
one
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.Si
licon
e in
sula
ted
cond
ucto
rs. O
uter
sili
cone
insu
latio
n.
TS20
10,
22L
2Si
licon
eN
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
3,8
Silic
one
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.Si
licon
e in
sula
ted
cond
ucto
rs. O
uter
sili
cone
insu
latio
n.
TS40
10,
22L
4Si
licon
eN
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
4,4
Silic
one
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.Si
licon
e in
sula
ted
cond
ucto
rs. O
uter
sili
cone
insu
latio
n.
TS20
20,
5L
2Si
licon
eN
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
5,0
Silic
one
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.Si
licon
e in
sula
ted
cond
ucto
rs. O
uter
sili
cone
insu
latio
n.
TS40
20,
5L
4Si
licon
eN
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
5,0
Silic
one
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.Si
licon
e in
sula
ted
cond
ucto
rs. O
uter
sili
cone
insu
latio
n.
TS20
30,
75L
2Si
licon
eN
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
6,2
Silic
one
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.Si
licon
e in
sula
ted
cond
ucto
rs. O
uter
sili
cone
insu
latio
n.
TS20
41,
0L
2Si
licon
eN
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
6,2
Silic
one
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.Si
licon
e in
sula
ted
cond
ucto
rs. O
uter
sili
cone
insu
latio
n.
TS20
51,
5L
2Si
licon
eN
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
8,0
Silic
one
Ther
moc
oupl
e ca
ble.
Sili
cone
insu
late
d co
nduc
tors
. Ou
ter s
ilico
ne in
sula
tion
and
copp
er o
verb
raid
.TS
206
0,22
L2
Silic
one
No
Silic
one
-50.
.. +
200
Yes
Good
Very
Go
od4,
3
Silic
one
Ther
moc
oupl
e ca
ble.
Sili
cone
insu
late
d co
nduc
tors
. Ou
ter s
ilico
ne in
sula
tion
and
copp
er o
verb
raid
. TS
207
0,5
L2
Silic
one
No
Silic
one
-50.
.. +
200
Yes
Good
Very
Go
od5,
5
Silic
one
Ther
moc
oupl
e ca
ble.
Sili
cone
insu
late
d co
nduc
tors
. Ou
ter s
ilico
ne in
sula
tion
and
copp
er o
verb
raid
. TS
208
1,0
L2
Silic
one
No
Silic
one
-50.
.. +
200
Yes
Good
Very
Go
od7,
2
Silic
one
Ther
moc
oupl
e ca
ble.
Sili
cone
insu
late
d co
nduc
tors
. Foi
l scr
eene
d.
TS20
90,
75L
2Si
licon
eN
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
6,4
Silic
one
Ther
moc
oupl
e ca
ble.
Sili
cone
insu
late
d co
nduc
tors
. Foi
l scr
eene
d.
TS21
00,
5L
2Si
licon
eN
oSi
licon
e-5
0...
+20
0Ye
sGo
odVe
ry
Good
4,7
Silic
one
Ther
moc
oupl
e ca
ble.
Sili
cone
insu
late
d co
nduc
tors
. Ou
ter s
ilico
ne in
sula
tion
and
copp
er o
verb
raid
. TS
211
0,75
L2
Silic
one
No
Silic
one
-50.
.. +
200
Yes
Good
Very
Go
od7,
0
Silic
one
Ther
moc
oupl
e ca
ble.
Sili
cone
insu
late
d co
nduc
tors
. Ou
ter s
ilico
ne in
sula
tion
and
copp
er o
verb
raid
. TS
212
1,5
L2
Silic
one
No
Silic
one
-50.
.. +
200
Yes
Good
Very
Go
od
Teflo
n®Th
erm
ocou
ple
cabl
e. T
eflo
n in
sula
ted
cond
ucto
rs.
Oute
r Tef
lon
insu
latio
n.TT
201
0,22
L2
Teflo
n®N
oTe
flon®
-75.
.. +
250
Yes
Very
Go
odVe
ry
Good
2,5x1,5
Teflo
n®Th
erm
ocou
ple
cabl
e. T
eflo
n in
sula
ted
cond
ucto
rs.
TT20
20,
03D
2Te
flon®
No
Teflo
n®-7
5...
+25
0Ye
sVe
ry
Good
Very
Go
od1,
0
Teflo
n®Th
erm
ocou
ple
cabl
e. T
eflo
n in
sula
ted
cond
ucto
rs.
TT20
30,
22L
2Te
flon®
No
Teflo
n®-7
5...
+25
0Ye
sVe
ry
Good
Very
Go
od2,
1
Teflo
n®Th
erm
ocou
ple
cabl
e. T
eflo
n in
sula
ted
cond
ucto
rs. O
uter
Tef
lon
unsu
latio
n.
Stai
nles
s st
eel o
verb
raid
TT20
40,
22L
2Te
flon®
No
Teflo
n®-7
5...
+25
0Ye
sVe
ry
Good
Very
Go
od2x
3
Teflo
n®Th
erm
ocou
ple
cabl
e. T
eflo
n in
sula
ted
cond
ucto
rs. O
uter
Tef
lon
unsu
latio
n.
TT20
50,
2D
2Te
flon®
No
Teflo
n®-7
5...
+25
0Ye
sVe
ry
Good
Very
Go
od2,
5x1,
5
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH Ther
moc
oupl
e ca
ble.
Sili
cone
insu
late
d co
nduc
tors
.
CZAH Ther
moc
oupl
e ca
ble.
Sili
cone
insu
late
d co
nduc
tors
. Ou
ter s
ilico
ne in
sula
tion
and
copp
er o
verb
raid
.
CZAH Oute
r sili
cone
insu
latio
n an
d co
pper
ove
rbra
id.
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Ther
moc
oupl
e ca
ble.
Sili
cone
insu
late
d co
nduc
tors
.
POMIAR
Ther
moc
oupl
e ca
ble.
Sili
cone
insu
late
d co
nduc
tors
. Ou
ter s
ilico
ne in
sula
tion
and
copp
er o
verb
raid
.
POMIAR
Oute
r sili
cone
insu
latio
n an
d co
pper
ove
rbra
id.
Ther
moc
oupl
e ca
ble.
Sili
cone
insu
late
d co
nduc
tors
. Foi
l scr
eene
d.
POMIAR
Ther
moc
oupl
e ca
ble.
Sili
cone
insu
late
d co
nduc
tors
. Foi
l scr
eene
d.
Ther
moc
oupl
e ca
ble.
Sili
cone
insu
late
d co
nduc
tors
. Foi
l scr
eene
d.
POMIAR
Ther
moc
oupl
e ca
ble.
Sili
cone
insu
late
d co
nduc
tors
. Foi
l scr
eene
d.
Ther
moc
oupl
e ca
ble.
Sili
cone
insu
late
d co
nduc
tors
.
POMIAR
Ther
moc
oupl
e ca
ble.
Sili
cone
insu
late
d co
nduc
tors
. Ou
ter s
ilico
ne in
sula
tion
and
copp
er o
verb
raid
.
POMIAR
Oute
r sili
cone
insu
latio
n an
d co
pper
ove
rbra
id.
TS21
1
POMIAR
TS21
1
TS21
2
POMIAR
TS21
21,
5
POMIAR 1,
5
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
LSp.
L2Sp.
2
DSp.
D2Sp.
2Te
flon®
Sp.
Teflo
n®
Teflo
n®
Sp.
Teflo
n®
z z z z z z No z No
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
Teflo
n® o.o.
Teflo
n®+
250
o.o.
+25
0
-75.
..
o.o.-7
5...
+25
0
o.o.
+25
0Ye
s
o.o.Ye
s
58. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
GEN
ERA
L IN
FORM
ATIO
NCO
NST
RUCT
ION
GEN
ERA
L DA
TA
INSU
LATI
ON 2)
CO
NST
RUCT
ION
PRODUCT CODE
SECTION (mm2)
SOLID/STRANDED
NUMBER OF CONDUCTORS
INSULATION 2)
SCREEN
OUTER INSULATION 2)
OPERATING TEMPERATURE (0C)
COLOUR CODING
MECHANICAL RESISTANCE
MOISTURERESISTANCE
DIAMETER/ DIMENSIONS (mm) 1)
THER
MOC
OUPL
E CA
BLES
Teflo
n®Th
erm
ocou
ple
cabl
e. T
eflo
n in
sula
ted
cond
ucto
rs. O
uter
Tef
lon
insu
latio
n.
TT20
60,
08D
2Te
flon®
Yes
Teflo
n®-7
5...
+25
0Ye
sVe
ry
Good
Very
Go
od1x
1,5
Teflo
n®Th
erm
ocou
ple
cabl
e. T
eflo
n in
sula
ted
cond
ucto
rs.
Scre
ened
. Out
er T
eflo
n in
sula
tion.
TT
207
0,22
L2
Teflo
n®Ye
sTe
flon®
-75.
.. +
250
Yes
Very
Go
odVe
ry
Good
3,0
Teflo
n®Th
erm
ocou
ple
cabl
e. T
eflo
n in
sula
ted
cond
ucto
rs. O
uter
Tef
lon
insu
latio
n.
Stai
nles
s st
eel o
verb
raid
. TT
208
0,5
L2
Teflo
n®N
oTe
flon®
-75.
.. +
250
Yes
Very
Go
odVe
ry
Good
6,0
Fibe
rgla
ssTh
erm
ocou
ple
cabl
e. F
iber
glas
s in
sula
ted
cond
ucto
rs.
Oute
r fib
ergl
ass
insu
latio
n.
TW20
10,
22L
2Fi
berg
lass
No
Fibe
rgla
ss+
400
Yes
Good
Wea
k1,
5x2,
5
Fibe
rgla
ssTh
erm
ocou
ple
cabl
e. F
iber
glas
s in
sula
ted
cond
ucto
rs.
Oute
r fib
ergl
ass
insu
latio
n.
TW20
21,
0L
2Fi
berg
lass
No
Fibe
rgla
ss+
400
Yes
Good
Wea
k2,
5x4
Fibe
rgla
ssTh
erm
ocou
ple
cabl
e. F
iber
glas
s in
sula
ted
cond
ucto
rs.
Oute
r fib
ergl
ass
insu
latio
n.
TW20
31,
5L
2Fi
berg
lass
No
Fibe
rgla
ss+
400
Yes
Good
Wea
k4,
2x2,
2
Fibe
rgla
ssTh
erm
ocou
ple
cabl
e. F
iber
glas
s in
sula
ted
cond
ucto
rs.
Oute
r fib
ergl
ass
insu
latio
n. S
tain
less
ste
el o
verb
raid
. TW
204
0,22
L2
Fibe
rgla
ssN
oFi
berg
lass
/ o
plot
st.
+40
0Ye
sGo
odW
eak
2,3
Fibe
rgla
ssTh
erm
ocou
ple
cabl
e. F
iber
glas
s in
sula
ted
cond
ucto
rs.
Oute
r fib
ergl
ass
insu
latio
n. S
teel
ove
rbra
id.
TW40
40,
22L
4Fi
berg
lass
No
Fibe
rgla
ss
/ opl
ot s
t.+
400
Yes
Good
Wea
k
Fibe
rgla
ssTh
erm
ocou
ple
cabl
e. F
iber
glas
s in
sula
ted
cond
ucto
rs.
Oute
r fib
ergl
ass
insu
latio
n.
TW20
50,
2D
2Fi
berg
lass
No
Fibe
rgla
ss+
400
Yes
Good
Wea
k1,
8
Fibe
rgla
ssTh
erm
ocou
ple
cabl
e. F
iber
glas
s in
sula
ted
cond
ucto
rs.
Oute
r fib
ergl
ass
insu
latio
n. S
teel
ove
rbra
id.
TW20
61,
0L
2Fi
berg
lass
No
Fibe
rgla
ss+
400
Yes
Good
Wea
k
TAB. D c.d. CABLESc.d.CABLESTAB. D
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CON
STRU
CTIO
N
CZAH
CON
STRU
CTIO
N POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Ther
moc
oupl
e ca
ble.
Tef
lon
insu
late
d co
nduc
tors
. Out
er T
eflo
n
POMIAR
Ther
moc
oupl
e ca
ble.
Tef
lon
insu
late
d co
nduc
tors
. Out
er T
eflo
n in
sula
tion.
POMIAR
insu
latio
n.
Ther
moc
oupl
e ca
ble.
Tef
lon
insu
late
d co
nduc
tors
.
POMIAR
Ther
moc
oupl
e ca
ble.
Tef
lon
insu
late
d co
nduc
tors
. Sc
reen
ed. O
uter
Tef
lon
insu
latio
n.
POMIAR
Scre
ened
. Out
er T
eflo
n in
sula
tion.
Ther
moc
oupl
e ca
ble.
Tef
lon
insu
late
d co
nduc
tors
. Out
er T
eflo
n
POMIAR
Ther
moc
oupl
e ca
ble.
Tef
lon
insu
late
d co
nduc
tors
. Out
er T
eflo
n
Stai
nles
s st
eel o
verb
raid
.
POMIAR
Stai
nles
s st
eel o
verb
raid
.
Ther
moc
oupl
e ca
ble.
Fib
ergl
ass
insu
late
d co
nduc
tors
.
POMIAR
Ther
moc
oupl
e ca
ble.
Fib
ergl
ass
insu
late
d co
nduc
tors
. TW
201
POMIAR
TW20
1
TW20
2
POMIAR
TW20
21,
0
POMIAR 1,
0
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
LSp.
L2Sp.
2
Fibe
rgla
ss
Sp.
Fibe
rgla
ss
LSp.
L2Sp.
2Fi
berg
lass
Sp.
Fibe
rgla
ssN
o
Sp. N
o
Fibe
rgla
ss
Sp.
Fibe
rgla
ss
z z z z z z z No z No
/ opl
ot s
t.
z / opl
ot s
t. o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
Fibe
rgla
sso.o.
Fibe
rgla
ss+
400
o.o.
+40
0
+40
0
o.o.
+40
0Ye
s
o.o.Ye
s
59.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
Fibe
rgla
ssTh
erm
ocou
ple
cabl
e. F
iber
glas
s in
sula
ted
cond
ucto
rs.
Oute
r fib
ergl
ass
insu
latio
n. C
oppe
r ove
rbra
id.
TW21
00,
5L
2Fi
berg
lass
No
Fibe
rgla
ss+
400
Yes
Good
Wea
k4,
2
Fibe
rgla
ssTh
erm
ocou
ple
cabl
e. F
iber
glas
s in
sula
ted
cond
ucto
rs.
Oute
r fib
ergl
ass
insu
latio
n.TW
211
0,08
D2
Fibe
rgla
ssN
oFi
berg
lass
+40
0Ye
sGo
odW
eak
1,3x
1,37
Quar
tz fi
ber
Ther
moc
oupl
e ca
ble.
Qua
rtz f
iber
insu
late
d co
nduc
tors
. Ou
ter q
uart
z fib
er in
sula
tion.
TW
207
0,2
D2
Quar
tz fi
ber
No
Quar
tz fi
ber
+90
0Ye
sGo
odW
eak
3,0
Cera
mic
fibe
rTh
erm
ocou
ple
cabl
e. C
eram
ic fi
ber i
nsul
ated
con
duct
ors.
Ou
ter c
eram
ic fi
ber i
nsul
atio
n.TW
208
0,5
L2
Cera
mic
fiber
No
Cera
mic
fiber
1200
Yes
Good
Wea
k2x
3
Cera
mic
fibe
rTh
erm
ocou
ple
cabl
e. C
eram
ic fi
ber i
nsul
ated
con
duct
ors.
Ou
ter c
eram
ic fi
ber i
nsul
atio
n.
TW20
90,
5D
2Ce
ram
ic fib
erN
oCe
ram
ic fib
er12
00Ye
sGo
odW
eak
3,2x
1,8
PCV
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.PV
C in
sula
ted
cond
ucto
rs. O
uter
PVC
insu
latio
n.
TP20
10,
22L
2PC
VN
oPC
V-3
0...
+10
5Ye
sVe
ry
Good
Very
Go
od4,
0
PCV
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.PV
C in
sula
ted
cond
ucto
rs. O
uter
PVC
insu
latio
n.
TP20
20,
75L
2PC
VN
oPC
V-3
0...
+10
5Ye
sVe
ry
Good
Very
Go
od
PCV
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.PV
C in
sula
ted
cond
ucto
rs. O
uter
PVC
insu
latio
n.
TP20
31
L2
PCV
No
PCV
-30.
.. +
105
Yes
Very
Go
odVe
ry
Good
PCV
Ther
moc
oupl
e ca
ble.
PVC
insu
late
d co
nduc
tors
. Ou
ter P
VC in
sula
tion.
Cop
per o
verb
raid
.TP
401
0,5
L4
PCV
No
PCV
-30.
.. +
105
Yes
Very
Go
odVe
ry
Good
Kapt
on®
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.Ka
pton
insu
late
d co
nduc
tors
. Out
er K
apto
n in
sula
tion.
TK20
10,
2D
2Ka
pton
®N
oKa
pton
®+
400
No
Very
Go
odVe
ry
Good
3x1,
5
Kapt
on®
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.Ka
pton
insu
late
d co
nduc
tors
. Out
er K
apto
n in
sula
tion.
TK
202
0,08
D2
Kapt
on®
No
Kapt
on®
+40
0N
oVe
ry
Good
Very
Go
od0,
9x1,
5
Kapt
on®
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.Ka
pton
insu
late
d co
nduc
tors
. Out
er K
apto
n in
sula
tion.
TK
203
0,32
D2
Kapt
on®
No
Kapt
on®
+40
0N
oVe
ry
Good
Very
Go
od1,
2x0,
7
Kapt
on®
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.Ka
pton
insu
late
d co
nduc
tors
. Out
er K
apto
n in
sula
tion.
TK20
40,
22L
2Ka
pton
®N
oKa
pton
®+
400
No
Very
Go
odVe
ry
Good
1,8x
1,0
Not
es:
1) T
he d
imen
sion
s of
the
cabl
e m
ay d
iffer
slig
htly
from
thos
e lis
ted
in th
e ta
ble
- for
det
ails
plea
se a
sk w
hen
orde
ring
2
) KAP
TON
and
Teflo
n ar
e a
DuPo
nt tr
ade
nam
es
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH Ther
moc
oupl
e ca
ble.
Qua
rtz f
iber
insu
late
d co
nduc
tors
.
CZAH Ther
moc
oupl
e ca
ble.
Qua
rtz f
iber
insu
late
d co
nduc
tors
.
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
Ther
moc
oupl
e ca
ble.
Cer
amic
fibe
r ins
ulat
ed c
ondu
ctor
s.
POMIAR
Ther
moc
oupl
e ca
ble.
Cer
amic
fibe
r ins
ulat
ed c
ondu
ctor
s.
Oute
r cer
amic
fibe
r ins
ulat
ion.
POMIAR
Oute
r cer
amic
fibe
r ins
ulat
ion.
Ther
moc
oupl
e ca
ble.
Cer
amic
fibe
r ins
ulat
ed c
ondu
ctor
s.
POMIAR
Ther
moc
oupl
e ca
ble.
Cer
amic
fibe
r ins
ulat
ed c
ondu
ctor
s.
Oute
r cer
amic
fibe
r ins
ulat
ion.
POMIAR
Oute
r cer
amic
fibe
r ins
ulat
ion.
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.
POMIAR
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.PV
C in
sula
ted
cond
ucto
rs. O
uter
PVC
insu
latio
n.
POMIAR
PVC
insu
late
d co
nduc
tors
. Out
er P
VC in
sula
tion.
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.
POMIAR
Ther
moc
oupl
e ca
ble,
com
patib
le w
ith s
enso
r typ
e.PV
C in
sula
ted
cond
ucto
rs. O
uter
PVC
insu
latio
n.
POMIAR
PVC
insu
late
d co
nduc
tors
. Out
er P
VC in
sula
tion.
TP
202
POMIAR
TP20
2
TP20
3
POMIAR
TP20
31
POMIAR 1
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
LSp.
L4Sp.
4
DSp.
D2Sp.
2Ka
pton
®
Sp.
Kapt
on®
Kapt
on®
Sp.
Kapt
on®
z z z z z z No z No
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
Kapt
on® o.
o.
Kapt
on®
+40
0
o.o.
+40
0
+40
0
o.o.
+40
0N
o
o.o.N
o
60. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
IN HEAD TEMPERATURE TRANSMITTER TYPE SEM206P
� ambient operating range -40…+85° C � ambient storage temperature -50… + 90° C � humidity range 10…90% RH, non condensing � dimensions: 43mm diameter, 21mm height � housing made of ABS/NORYL � configuration by USB-KIT � USB connection with PC (2.0 recommended) � running Windows XP or later � In head application: DIN raill mount (RMK-3/T handle), housing IP67 (SCH4)
INPUTSensor type: � Pt100 , BS EN 60751 standard � 100Ω at 0 °C, 2 or 3 wire
Sensor range: � -200...+850°C, (18...390Ω) �Minimum span: 25 °C
Linearisation: � BS EN60751 (IEC 751) standard, JISC 1604
Accuracy: ±0.1 °C ±0.05% of reading Temp. error: 25 ppm/°CExcitation current: <200μALead resistance: <20Ω per leg(max. effect): 0.002 °C/Ω
OUTPUTOutput range: � 4...20mA , 2 wire. � (3.8mA...20.2mA)
current loop Error indication: � 21mA or 3,8mA, programmable
Accuracy: ±5μALoop voltage effect: 0.2μA/VTemp. error: 1μA/°CVoltage: 10...35VDCMaximum output load: � [(V supply -10)/20] kΩ np. 700Ω at 24V
Protection: � reverse polariry and voltage >30V protection
IN HEAD TEMPERATURE TRANSMITTER TYPE SEM206TC
� ambient operating range -40…+85° C � ambient storage temperature -50… + 90° C � humidity range 10…90% RH, non condensing � dimensions: 43mm diameter, 21mm height � housing made of ABS/NORYL � configuration by USB-KIT � USB connection with PC (2.0 recommended) � running Windows XP or later � In head application: DIN raill mount (RMK-3/T handle), housing IP67 (SCH4)
INPUTSensors and rang: � K (-200...+1370 °C) � J (-100...+1200 °C) � E (-200...+1000 °C) � N (-180...+1300 °C)
� T (-200...+400 °C) � R (-10...+1760 °C) � S (-10...+1760 °C) �mV (-10...+70mV)
Minimum span: 25 °C (>50°C recommended)Linearisation:BS4937/IEC 584-1, linear for mV Accuracy: �±0.1% ±0.5 °C (K, J, E, N, R, S) �±0.2% ±0.5 °C (T) �±0.02% pełn. zakresu (at mV)
Input/output isolation: 250VDC, Cold junction error: 0,5 °CCold junction tracking: 0,05 °C/°CCold junction range: -40...+85 °CTemp. error: � zero 0,1 °C/°C, range 0,05 °C/°C
OUTPUTOutput range: � 4...20mA , 2-przew. � (3.8mA...20.2mA)
Current loopError indication: � 21mA or 3,8mA, programmable
Accuracy: ±5μALoop voltage effect: 0.2μA/VTemp. eror: 1μA/°CVoltage 10...30VDCMaximum output load: � [(V supply -10)/20] kΩ np. 700Ω at 24V
Protection: � reverse polariry and voltage >30V protection
IN HEAD TEMPERATURE TRANSMITTER TYPE ATR-RTD AND ATR-TC-RTD WITH REGISTRATION FUNCTION
� ambient operating range: 40…+85° C � humidity: 30…90% RH (bez kondensacji) � dimensions: 45mm diameter; 23mm height � housing materialNylon (PA99) � input type, connection type , range and recor-ding parameters are gurable by RFID or mobiles with NFC and free app Pixsys for Android � registration of the measured temperature � in the internal memory ( to 4000 measurements- loop registration) � Diagram of registered temperature available. Access through � programmer and mobile with NFC for Android. � protection IP20 � housing for in head mount, e.g. B type � reference CE,EN 61000-4-4, EN61000- 6-2 NFC PROGRAMMING
INPUT
Specification: ATR-RTDPt100 2,3,4 wire: �Measuring range -200 …+800° C � Resistance range 18,5…378Ω
Ni 100 2,3,4 wire: �Measuring range – 50 ….+170° C � Resistance range 74…..215Ω
Pt100 2 wire: �Measuring range -200…..+800° C � Resistance range 185…3780Ω
INPUT
Specification: ATR- TC-RTDPt100 2,3,4 wire: � Measuring range -200...+600 °C � Resistance range 18,5...313,7Ω
Ni 100 2,3,4 wire: � Measuring range – 60...+180 °C � Resistance range 69...223Ω
Sensor type T – 260...+400 °CSensor type E – 260...+940 °CSensor type J – 200...+1200 °CSensor type N – 260...+1280 °CSensor type K – 260...+1360 °CSensor type S – 40...+1760 °CSensor type R – 40...+1760 °CSensor type B – 40...+1820 °CInput Voltage – 10...+70mVSeparation 1kV AC
OUTPUT
� Current output: 4-20 mA � Error indication when out of the set range ±5 °C � Set Signal 21,5 mA or 3,8 mA � Input protection max. loop current about 30 mA � Memory capacity 4000 measurements (Non-Volatile Memory Storage) � Sampling rate from 1 to 3600 � Hum filtration 50÷60Hz � Max. proccess error 0,1% of range or 0,2 °C � EMI error <0,5% � Leads resistance 20 Ω max � Coefficient of temperature <100 ppm � Sampling time 300 ms � Accretion time (10-90%) about 600ms � Power supply 6÷32V DC � Input resolution: 1μA for ATR-RTD, 2μA for ATR-TC-RTD
TEMPERATURE TRANSMITTERSTEMPERATURE TRANSMITTERSTAB. E
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH POMIA
R
POMIAR
POMIAR ±0.02% pełn. zakresu (at mV)
POMIAR ±0.02% pełn. zakresu (at mV)
Input/output isolation: 250VDC,
POMIAR Input/output isolation: 250VDC,
Cold junction error: 0,5 °C
POMIAR Cold junction error: 0,5 °C
Cold junction tracking: 0,05 °C/°C
POMIAR Cold junction tracking: 0,05 °C/°C
Cold junction range: -40...+85 °C
POMIAR
Cold junction range: -40...+85 °CTemp. error:
POMIAR
Temp. error:�
POMIAR
� zero 0,1 °C/°C, range 0,05 °C/°C
POMIAR
zero 0,1 °C/°C, range 0,05 °C/°C
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
IN HEAD TEMPERATURE TRANSMITTER TYPE ATR-RTD AND ATR-TC-RTD WITH REGISTRATION FUNCTION
POMIAR
IN HEAD TEMPERATURE TRANSMITTER TYPE ATR-RTD AND ATR-TC-RTD WITH REGISTRATION FUNCTION
ambient operating range: 40…+85° C
POMIAR
ambient operating range: 40…+85° Chumidity: 30…90% RH (bez kondensacji)
POMIAR
humidity: 30…90% RH (bez kondensacji)dimensions: 45mm diameter; 23mm height
POMIAR
dimensions: 45mm diameter; 23mm heighthousing materialNylon (PA99)
POMIAR
housing materialNylon (PA99)input type, connection type , range and recor
POMIAR
input type, connection type , range and recording parameters are gurable by RFID or mobiles
POMIAR
ding parameters are gurable by RFID or mobiles with NFC and free app Pixsys for Android
POMIAR
with NFC and free app Pixsys for Androidregistration of the measured temperature
POMIAR
registration of the measured temperature in the internal memory ( to 4000 measurements-
POMIAR
in the internal memory ( to 4000 measurements- loop registration)
POMIAR
loop registration)� POMIA
R
� Diagram of registered temperature available. POMIAR
Diagram of registered temperature available. Access through POMIA
R
Access through � POMIA
R
� programmer and mobile with NFC for Android. POMIAR
programmer and mobile with NFC for Android. protection IP20POMIA
R
protection IP20housing for in head mount, e.g. B type POMIA
R
housing for in head mount, e.g. B type
Specification: ATR-RTD
POMIAR
Specification: ATR-RTD
Sp.
Sp. -10...+1760 °C)
Sp. -10...+1760 °C)
V (-10...+70mV)
Sp. V (-10...+70mV)
Minimum span: 25 °C (>50°C recommended)
Sp.
Minimum span: 25 °C (>50°C recommended)
BS4937/IEC 584-1, linear for mV
Sp.
BS4937/IEC 584-1, linear for mV
±0.1% ±0.5 °C (K, J, E, N, R, S)Sp.
±0.1% ±0.5 °C (K, J, E, N, R, S)
±0.02% pełn. zakresu (at mV)Sp.
±0.02% pełn. zakresu (at mV)
�
Sp. � (3.8mA...20.2mA)
Sp. (3.8mA...20.2mA)
Current loop
Sp. Current loop
Error indication:
Sp. Error indication:
�
Sp.
� 21mA or 3,8mA, programmable
Sp.
21mA or 3,8mA, programmableAccuracy: ±5μA
Sp.
Accuracy: ±5μALoop voltage effect: 0.2μA/V
Sp.
Loop voltage effect: 0.2μA/VTemp. eror: 1μA/°CSp.
Temp. eror: 1μA/°CVoltage 10...30VDCSp.
Voltage 10...30VDC
z z OUTPUTz OUTPUTOutput range:z Output range:
4...20mA , 2-przew.z 4...20mA , 2-przew.(3.8mA...20.2mA)z (3.8mA...20.2mA)
o.o.
o.o.
o.o.
o.o. np. 700
o.o. np. 700Ω
o.o.Ω at 24V
o.o. at 24V
reverse polariry and voltage >30V protectiono.o.
reverse polariry and voltage >30V protection
61.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
THREADED HOLDERS (FITTINGS) WITH A COMPRESSION FERRULE – MADE OF BRASS *)
THREADSENSOR DIAMETER
1,0 1,5 2,0 3,0 4,0 4,5 6,0 8,0 10,0 12,0 15,0 20,0
M6x1 UG61D1M UG61D15M UG61D2M UG61D3M
M8x1 UG81D1M UG81D15M UG81D2M UG81D3M UG81D4M
M10x1 UG101D3M UG101D4M UG101D45M UG101D6M
M12x1 UG121D45M UG121D6M UG121D8M
M16x1.5 UG1615D8M UG1615D10M UG1615D12M
M20x1,5 UG2015D6M UG2015D8M UG2015D10M UG2015D12M UG2015D15M
G1/2" UG05D6M UG05D8M UG05D10M UG05D12M UG05D15M
G3/4" UG075D12M UG075D15M UG075D20M
*) Non-standard versions available on request, e.g. with EPDM or PTFE insulation. EPDM – rubber seal rated up to 120 °C, PTFE - PTFE ferrule (teflon®)
THREADED HOLDERS (FITTINGS) WITH A COMPRESSION FERRULE – MADE OF STAINLESS STEEL *)
THREADSENSOR DIAMETER
1,0 1,5 2,0 3,0 4,0 4,5 6,0 8,0 10,0 12,0 15,0 20,0
M6x1 UG61D1S UG61D15S UG61D2S UG61D3S
M8x1 UG81D1S UG81D15S UG81D2S UG81D3S UG81D4S
M10x1 UG101D3S UG101D4S UG101D45S UG101D6S
M12x1 UG121D45S UG121D6S UG121D8S
M16x1.5 UG1615D8S UG1615D10S UG1615D12S
M20x1,5 UG2015D6S UG2015D8S UG2015D10S UG2015D12S UG2015D15S
G1/2" UG05D6S UG05D8S UG05D10S UG05D12S UG05D15S
G3/4" UG075D12S UG075D15S UG075D20S
*) Non-standard versions available on request, e.g. with EPDM or PTFE insulation. EPDM – rubber seal rated up to 120°C, PTFE - PTFE ferrule (teflon®)
COMPRESSION FITTINGS – THE MOST POPULAR TYPESCOMPRESSION FITTINGS – THE MOST POPULAR TYPESTAB. F
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH 1,0
CZAH 1,0 1,5
CZAH 1,5
M6x1
CZAH M6x1 UG61D1S
CZAH UG61D1S
M8x1
CZAH M8x1 UG81D1S
CZAH UG81D1S
M10x1
CZAH M10x1
M12x1CZAH
M12x1
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR UG2015D6M
POMIAR UG2015D6M
UG05D6M
POMIAR UG05D6M
*) Non-standard versions available on request, e.g. with EPDM or PTFE insulation. EPDM – rubber seal rated up to 120 °C, PTFE - PTFE ferrule (teflon®)
POMIAR
*) Non-standard versions available on request, e.g. with EPDM or PTFE insulation. EPDM – rubber seal rated up to 120 °C, PTFE - PTFE ferrule (teflon®)
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
THREADED HOLDERS (FITTINGS) WITH A COMPRESSION FERRULE – MADE OF STAINLESS STEEL *)
POMIAR
THREADED HOLDERS (FITTINGS) WITH A COMPRESSION FERRULE – MADE OF STAINLESS STEEL *)
POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
UG121D8M
Sp.
UG121D8M
UG1615D8MSp.
UG1615D8M UG1615D10MSp.
UG1615D10M
UG2015D8MSp.
UG2015D8M UG2015D10MSp.
UG2015D10M
z z z z z z z z o.o
.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.15,0o.
o.15,0
62. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
MOUNTING BRACKET UZ *)
SYMBOL DIAMETER MATERIAL PHOTO DIMENSIONS
UZ22 D=23
steel + aluminium alloy
D407090
40322 x M6
2 x M8
UZ25 D=25
*) non-standard version on request
STEEL FLANGE DN20
SYMBOL DESCRIPTION PHOTO DIMENSIONS
DN20
steel thermowellwelded to a flange
4 holes Ø14/ 90O
Ø58Ø75
Ø105 L(D
N)
steel thermowell welded to a flange
ceramic sheath inside a thermowell
4 holes Ø14/ 90O
Ø58Ø75
Ø105
ceramic sheath
thermowell
LC
BRACKETS AND FLANGESBRACKETS AND FLANGESTAB. G
CZAH
CZAH
CZAH
CZAH
CZAH steel thermowell
CZAH steel thermowell welded to a flange
CZAH welded to a flange
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR S
p.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp.
Sp. z
70z 7090z 90z z z o
.o.
o.o.
o.o.
o.o.
o.o.
o.o.
40o.o.
40o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.
63.CZAHCZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
TOLERANCE CLASSTEMPERATURE RANGE [°C]
TOLERANCE VALUE A)
FOR WIRE WOUND RESISTORS FOR THIN FILM RESISTORS
AA -50 ÷ +250 0 ÷ +150 ± ( 0.1+0.0017 I t I )
A -100 ÷ +450 -30 ÷ +300 ± ( 0.15+0.002 I t I )
B -196 ÷ +660 -50 ÷ +500 ± ( 0.3+0.005 I t I )
C -196 ÷ +660 -50 ÷ +600 ± ( 0.6+0.01 I t I )
a) I t I = temperature in °C no matter what unit (absolute value)
Special tolerance classes and special operating ranges:
Tolerances and operating ranges different than the above-listed shoud be agreed between the manufacturer and a customer.
Special tolerance classes are made as a multiples or parts of the values of class B tolerance.
Special tolerance class without the specification and an operating range in not allowed.
The manufacturer and the user can establish tolerances, for thermometers and pyrometers, out of
the range from the table.
Special tolerance class may also be defined by limited or extended temperature ranges, for example: from-196 °C to 850 °C or from -200 °C to 660°C
TYPE
CLASS 1 CLASS 2 CLASS 3
OPERATING RANGE °C
TOLERANCE °C
OPERATING RANGE °C
TOLERANCE °C
OPERATING RANGE °C
TOLERANCE °C
T Cu-CuNi
from -40 to +125 from +125 to +350
± 0,5 ± 0,004/t/
from -40 to +133 from +133 to +350
±1 ± 0,0075/t/
from -67 to +40 from -200 to -67
±1 ± 0,015/t/
E NiCr-CuNi
from -40 to +375 from +375 to +800
± 1,5 ± 0,004/t/
from -40 to +333 from +333 to +900
±2,5 ± 0,0075/t/
from -167 to +40 from -200 to -167
±2,5 ± 0,015/t/
J Fe-CuNi
from -40 to +375 from +375 to +750
± 1,5 ± 0,004/t/
from -40 to +333 from +333 to +750
±2,5 ± 0,0075/t/
K NiCr-Ni
from -40 to +375 from +375 to +1000
± 1,5 ± 0,004/t/
from -40 to +333 from +333 to +1200
±2,5 ± 0,0075/t/
from -167 to +40 from -200 to -167
±2,5 ± 0,015/t/
N NiCrSi-NiSi
from -40 to +375 from +375 to +1000
± 1,5 ± 0,004/t/
from -40 to +333 from +333 to +1200
±2,5 ± 0,0075/t/
R PtRh13-Pt
S PtRh10-Pt
from 0 to +1100 from +1100 to +1600
± 1 ±(1+0,003)(t-1100)
from 0 to +600 from +600 to +1600
±1,5 ± 0,0025/t/
B PtRh30-PtRh6
from +600 to +1700
± 0,0025/t/
from +600 to +800 from +800 to +1700
±4 ± 0,005/t/
CLASSES AND RANGES OF THE INDUSTRIAL RESISTANCE THERMOMETERS, REFERENCE: PN-EN 60751:2009 CLASSES AND RANGES OF THE INDUSTRIAL RESISTANCE THERMOMETERS, REFERENCE: PN-EN 60751:2009 TAB. H
TOLERANCES FOR THERMOCOUPLES / REFERENCE - EN 60584 -1TOLERANCES FOR THERMOCOUPLES / REFERENCE - EN 60584 -1TAB. I
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH
CZAH from -40 to +375
CZAH from -40 to +375 from +375 to +1000
CZAH from +375 to +1000
NiCrSi-NiSi
CZAH NiCrSi-NiSi
from -40 to +375
CZAH from -40 to +375
from +375 to +1000
CZAH from +375 to +1000
R
CZAH R
PtRh13-Pt
CZAH PtRh13-Pt
S
CZAH S
PtRh10-Pt
CZAH PtRh10-Pt
PtRh30-PtRh6CZAH
PtRh30-PtRh6
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
POMIAR
CLASS 2
POMIAR
CLASS 2
OPERATING
POMIAR
OPERATING RANGE °C
POMIAR
RANGE °C
± 0,004/t/
POMIAR
± 0,004/t/from -40 to +133
POMIAR
from -40 to +133from +133 to +350
POMIAR
from +133 to +350
± 1,5
POMIAR
± 1,5± 0,004/t/
POMIAR
± 0,004/t/
from -40 to +375
POMIAR
from -40 to +375 from +375 to +750POMIA
R
from +375 to +750± 1,5
POMIAR
± 1,5± 0,004/t/POMIA
R
± 0,004/t/
from -40 to +375 POMIAR
from -40 to +375 POMIAR TOLERANCES FOR THERMOCOUPLES / REFERENCE - EN 60584 -1
POMIAR TOLERANCES FOR THERMOCOUPLES / REFERENCE - EN 60584 -1 Sp.
Special tolerance class may also be defined by limited or extended temperature ranges, for example: from-196 °C to 850 °C or from -200 °C to 660°C
Sp.
Special tolerance class may also be defined by limited or extended temperature ranges, for example: from-196 °C to 850 °C or from -200 °C to 660°C
Sp. z
o.o.
o.o.
o.o.
o.o.
o.o.
o.o.± ( 0.6+0.01 I t I )
o.o.± ( 0.6+0.01 I t I )
64. CZAH CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl CZAH–POMIAR Sp. z o.o. 40–241 Katowice, Porcelanowa 25 Poland; Tel.: +48 32 607 31 50; Fax: +48 32 607 31 73; e-mail: office@czah.pl
NOTES
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................
CZAH ...............................................................................................................................
CZAH ...............................................................................................................................
...............................................................................................................................
CZAH ...............................................................................................................................
...............................................................................................................................
CZAH ...............................................................................................................................
...............................................................................................................................
CZAH ...............................................................................................................................
...............................................................................................................................
CZAH ...............................................................................................................................
...............................................................................................................................
CZAH ...............................................................................................................................
...............................................................................................................................
CZAH ...............................................................................................................................
...............................................................................................................................
CZAH ...............................................................................................................................
...............................................................................................................................
CZAH ...............................................................................................................................
...............................................................................................................................CZAH
...............................................................................................................................
...............................................................................................................................CZAH
...............................................................................................................................
POMIAR ...............................................................................................................................
POMIAR ...............................................................................................................................
...............................................................................................................................
POMIAR ...............................................................................................................................
...............................................................................................................................
POMIAR
...............................................................................................................................
...............................................................................................................................
POMIAR
...............................................................................................................................
...............................................................................................................................
POMIAR
..............................................................................................................................................................................................................................................................
POMIAR
...............................................................................................................................
...............................................................................................................................
POMIAR
..............................................................................................................................................................................................................................................................
POMIAR
...............................................................................................................................
...............................................................................................................................
POMIAR
..............................................................................................................................................................................................................................................................
POMIAR
...............................................................................................................................
...............................................................................................................................
POMIAR
...............................................................................................................................
POMIAR
...............................................................................................................................
POMIAR
...............................................................................................................................
...............................................................................................................................
POMIAR
...............................................................................................................................
...............................................................................................................................
POMIAR
...............................................................................................................................
...............................................................................................................................
POMIAR
...............................................................................................................................
...............................................................................................................................
POMIAR
...............................................................................................................................
...............................................................................................................................POMIAR
...............................................................................................................................
...............................................................................................................................POMIAR
...............................................................................................................................
Sp. ...............................................................................................................................
Sp. ...............................................................................................................................
...............................................................................................................................
Sp. ...............................................................................................................................
...............................................................................................................................
Sp.
...............................................................................................................................
...............................................................................................................................
Sp.
...............................................................................................................................
...............................................................................................................................Sp.
...............................................................................................................................
...............................................................................................................................Sp.
...............................................................................................................................
...............................................................................................................................Sp.
...............................................................................................................................
z ...............................................................................................................................z ...............................................................................................................................
...............................................................................................................................z ...............................................................................................................................
...............................................................................................................................z ...............................................................................................................................
o.o.
......................
o.o.
......................
......................
o.o.......................
......................
o.o.......................
...............................................................................................................................
o.o......................................................................................................................................................
o.o.......................
...............................................................................................................................o.o.
.....................................................................................................................................................o.o.
......................
...............................................................................................................................o.o.
.....................................................................................................................................................o.o.
......................
CALIBRATION BY FIXED POINTS METHOD
� Calibration of Long Platinum resistance thermometers 25Ω (SPRT) in fixed point cells::
� The triple point of Mercury, Hg (-38,8344 °C),
� The triple point of Water H2O (0,01 °C),
� Melting point of Gallium, Ga (29,7646 °C),
� Solidification of Tin, Sn (231,928 °C),
� Solidification of Zinc, Zn (419,527 °C),
� Solidification of Aluminium, Al. (660,323 °C).
� Calibration of controlling thermoelements S type, (PtRh10-Pt) and R (PtRh13-Pt)
in fixed point cells:
� of solidification of Zinc, Zn (419,527 °C),
� of solidification of Aluminium, Al (660,323 °C),
� of solidification of Copper, Cu (1084,62 °C),
� of solidification of Gold, Au (1064,18 °C).
� Calibration of controlling thermoelements B type (PtRh30-PtRh6) in fixed point
cells:
� freezing point of Aluminium, Al (660,323 °C),
� freezing point of Copper, Cu (1084,62 °C),
� freezing point of Palladium, Pd (1553,5 °C).
CALIBRATION BY COMPARISON METHOD
� radiation thermometers, thermovision cameras, line scanners in
range from -18°C to 1500°C (out of the accreditation range: to
1700°C)
� industrial reasistance thermometers (Pt100) range from -40 °C
to 550 °C
� thermocouple sensors made of noble metals (S, R, B) range from
0 °C to 1500 °C
� thermocouple sensors made of base metals (E, J, K, N, T) range
from 0 °C to 1200 °C (out of the accreditation range to 1250 °C)
� electrical and electronic thermometers (also at the customer’s
premises) range from -20 °C to 1200 °C (out of the accreditation
range from -40 °C to 1450 °C)
� temperature indicators, meters, including temperature control-
lers (also at the customer’s premises)
� temperature simulators (calibrators) temperatury (voltage and
current ways out of accreditation range)
Competitive prices short lead timeworld-class calibration
ACCREDITEDL ABORATORY
Czah-Pomiar Sp. z o.o.4O-241 Katowice, Porcelanowa 25, PolandSales department: +48 32 6O7 31 53 / + 4 8 32 6O7 31 6O / + 4 8 32 6O7 31 61 / + 4 8 32 6O7 31 66Office: + 4 8 32 6O7 31 5O / + 4 8 32 6O7 31 73office@czah.pl
www.czah.pl
top related