pumpworks 610 model pwm / pwm-d api 610 bb1 two-stage … · pwm api 610 bb3 multistage pump pwm...
Post on 06-Aug-2020
60 Views
Preview:
TRANSCRIPT
PumpWorks. The only pump company to offer a full line of API and Industrial products 100% Made Right In the USA.
Bearing Housing• Finned design improves heat
dissipation for cooler running bearing• Large bearing housing easily
accommodates vibration switches, transmitters and proximity probes
• Optional sleeve bearing designed to handle variety of RTDs
Seal Chamber• API 610 seal chamber allows user
to install any API 682 cartridge seal to meet process requirements
• Renewable throat bushing for controlled seal chamber environment• Optional water cooled stuffing box for high process temperature
application
Flanges• ANSI B16.5 Class 900# RF suction & discharge• Optional 600# RF and 1500# RF
Impeller• Precision
cast for maximum
efficiency• Dynamically balanced to 4W/N before mounting• Opposing impeller design to limit axial
thrust to maximize thrust bearing life• Individually keyed, shrunk fit and restrained in the direction
of thrust by split ring• Mounted on shaft with vane tips staggered for reduced pressure pulsation• Optional double suction
large eye first stage impeller for lower NPSH performance
Quality• Manufactured and
tested in the USA
Casing• Mounting feet cast integral into the bottom half providing near centerline mounting to minimize thermal growth in
hot service• Wide feet design to minimize affects of forces and
moments imposed by the system piping • Hydrostatic test of pressure containing parts to 1.5 MAWP
ePOD Pump Selector• Access to end users and specifiers
to select your pump online at www.pumpworks610.com – no password or login required
Delivery• 26 weeks for API 610 material class S-4, S-6, S-8, C-6 and A-8• Refer to the factory on deliveries for other API material classes and customer specific material combinations
PumpWorks 610 Model PWM / PWM-D API 610 BB1 Two-Stage Pump
Double Volute• Precision cast hydraulic
passageways minimizes radial thrust for less shaft deflection and bearing loading
Renewable Wear Rings• All wear rings are replaceable
permitting re-establishing initial running clearances and efficiency
Crossover Line• Compact design for streamlined
fluid flow• Sized for minimum friction loss and
maximize efficiency
Center Bushing• Split design facilitates
inspection, removal and replacement
• Sized to balance axial thrust• Provides maximum rotating
element support and dampening
Case Studs & Bolts• Torque to 42,000 psi stress for maximum clamping
force on the split line• Case nuts are high strength “Turbine” type cap nuts• Cap nuts located on top half casing parting flange
allowing easy case removal for rotor inspection and maintenance
Nozzles• Cast integrally in the lower half casing,
permitting disassembly without disturbing piping connections
Balance Line• Maintains equal seal chamber pressure
Labyrinth Oil Seal• INPRO™ bearing isolators
to provide optimum bearing housing environment
Bearing Lubrication• Ring oil lubrication to ensure
effective lubrication• Optional pure or purge mist
lubrication
Bearing Design• Ball / Ball•Optional Sleeve / Ball•Optional Sleeve / Kingsbury
Integral Flange Connections• Eliminates case welding and
potential failure points
Lifting Eyes• Designed to carry
the entire weight of the pump, simplifying the rigging required to handle
PumpWorks • www.pumpworks.com 8885 Monroe • Houston, TX 77061 • Ph. 888-405-0209 • Fax 713-956-2141
www.pumpworks.com • twitter: @PumpWorks
The PumpWork Differencen Manufactured and tested in the United Statesn Access for end users and specifiers to select,
configure and estimate their pump online at www.pumpworks610.com
PWH API 610 Process Pump PWH is the PumpWorks 610 API 610 current edition overhung OH2 process pump in API 610 material classes S-6, S-8, C-6 and A-8. Other materials combinations are available. The pumps are built, assembled and performance tested in full compliance with API 610 in Tyler, Texas USA.
n Shorter lead times than the competition – 16 weeks for API 610 Material Classes S-6, S-8 and C-6
See our PWH API 610 Single Stage OH2 Brochure for more information.
PW-11 API 610 Upgrade ProgramPW-11 is the PumpWorks 610 retrofit upgrade kit that meets API 610 current edition for horizontal single stage OH2 process pumps. The kit ensures petroleum refineries have a fast and cost-effective way to upgrade any brand of existing OH2 process pump and achieve API 610 current edition requirements without expensive changes to the wet end (casing and impeller) and piping.
See our PW-11 API 610 Upgrade Program Brochure for more information.
PWM API 610 BB3 Multistage PumpPWM pump is designed for covering the full range of High Pressure petroleum refinery services, petrochemical plant services, gas processing, oil processing, offshore installations (platforms), hydrocarbon and crude oil pipeline and finished products pipeline services.
n Shorter lead times than the competition – 26 weeks for API 610 material class S-4, S-6, S-8, C-6 and A-8
See our PumpWorks 610 Multistage Pump Brochure for more information.
PWV API 610 Vertical Turbine PumpPWV is the PumpWorks 610 API 610 current edition VS6 and VS1 vertical turbine pump in API 610 material classes S-1, S-4, S-5, S-8 and A-8. Other material combinations are available. The pumps are built, assembled and performance tested in full compliance with API 610 in Tyler, Texas USA.
n Shorter lead times than the competition – 16 weeks in API 610 Material Class S-1
See our PWV API 610 Vertical Turbine VS6 (Can Type) and VS1 (Sump Type) Brochure for more information.
PWI-BB API 610 Vertical In-Line Single Stage OH3 The PWI-BB is an API 610, OH3 heavy duty bearing bracketed vertical in-line pump designed to cover a wide range of applications found in petroleum processing facilities, gas processing, petrochemical, offshore installations (platforms), hydrocarbon and crude oil terminal and aviation (jet) fueling applications.
n Shorter lead times than the competition – 16 weeks for API 610 material class S-6, S-8 and C-6
See our PWI-BB 610 Vertical In-Line Single Stage OH3 Brochure for more information.
PWD API 610 BB1 Horizontal Split Single Stage PumpThe robust BB1 PWD is an axially split, single stage, horizontal, between bearing pump. Our heavy duty casing with multiple mounting options for temperature and liquid requirements afford our customers with application specific/ custom hydraulics designed to meet even the aggressive of pumping requirements. The PWD is designed for critical heavy-duty process applications like refining applications that include cooling water, distillation and sulfur recovery. The PWD is a versatile pump for loading, boiler feed boosting, crude oil pipeline, desalination and water transfer.
n The PWD delivers in 28 weeks
See our PWD API 610 BB1 Horizontal Split Single Stage Pump Brochure for more information.
Online Pump Selection with ePODVisit our website at www.pumpworks610.com and specify flow and performance needs and obtain pump selection and performance curve.
top related