quality through sensing & control technology · system shell with tab. quality through sensing...

QUALITY THROUGH SENSING & CONTROL TECHNOLOGY

QUALITY THROUGH SENSING

& CONTROL TECHNOLOGY

Asia CanTech 2014

QUALITY THROUGH SENSING & CONTROL TECHNOLOGY

QUALITY THROUGH SENSING & CONTROL TECHNOLOGY

Can Plants Aren’t Perfect

QUALITY THROUGH SENSING & CONTROL TECHNOLOGY

Can Plants Aren’t Perfect

QUALITY THROUGH SENSING & CONTROL TECHNOLOGY

Double Shell/Missing Tab

Detection for Easy Open End

Model SD220For Easy Open

Conversion Press

Detects Two Critical Defects

QUALITY THROUGH SENSING & CONTROL TECHNOLOGY

Shell

without

Tab

Double Shell/Missing Tab

Detection for Easy Open End

Model SW220

Software

• Profile end

w/tab

• Easily set up

system

Shell with

Tab

QUALITY THROUGH SENSING & CONTROL TECHNOLOGY

Double Shell/Missing Tab

Detection for Easy Open End

• Monitoring via TouchScreen Display

• Remote Calibration

• Arc Flash safe

QUALITY THROUGH SENSING & CONTROL TECHNOLOGY

Light Tester for Can Ends

Model LH200

For Easy Open

Conversion Press

Detects Pin Hole Defects

QUALITY THROUGH SENSING & CONTROL TECHNOLOGY

LED Strobe for Can Ends• Compatible with Stolle

PressCheck system

• 6 year rated life

• Detects 2µm hole on

the entire can end.

• Over 900 EPM

Stop replacing old Xenon Strobes, and switch to LED

QUALITY THROUGH SENSING & CONTROL TECHNOLOGY

Light Tester for Can Bodies

Model LT20

For Randolph Light Testers

Detects Pin Holes

QUALITY THROUGH SENSING & CONTROL TECHNOLOGY

IllumiLED – TL101

• Replaces Halogen bulbs

• Significant power and maintenance savings

RI101

• Replaces obsolete reset bulb with LED

Light Tester Accessories for Can Bodies

QUALITY THROUGH SENSING & CONTROL TECHNOLOGY

Leak Detection for Three-piece Cans

Model MD30 TestAlert System For Borden/Alcoa

Leak Tester

Detects Leaks

QUALITY THROUGH SENSING & CONTROL TECHNOLOGY

Leak Detection for Three-piece Cans

QUALITY THROUGH SENSING & CONTROL TECHNOLOGY

Double Shell Detection- Steel

Model DS71 Fluximity

– Single Probe, Non Contact

detects double ends by

using the magnetic field of

the conveyor, or external

magnet.

QUALITY THROUGH SENSING & CONTROL TECHNOLOGY

Pulser II Double Sheet DetectorDesigned for:

• “Pick and Place”

• End of Arm Tooling

Probe memory

• Calibration stored in each probe’s memory for easy tooling changes

Outputs for:

• Metal Present

• Double Sheet

• Under Thickness

QUALITY THROUGH SENSING & CONTROL TECHNOLOGY

Wide Range of Sensors & Controls

to Solve All Types of Quality Needs

- Single Probe - Contact- For Steel & Tinplate

- Detect Doubles from

one side. - Dual Probe - Non-Contact- For All Metals

- Very Thin to Very

Thick Metals

- For sheet transfer

- Smart Sensors with Built in Memory!

- Contact- For Steel & Tinplate

- Single Probe Contact

- Great for Pick &

Place Applications

- Single Probe - Non-Contact- For Steel & Tinplate

- Ideally used on a

magnetic conveyer

transporting can

ends.

QUALITY THROUGH SENSING & CONTROL TECHNOLOGY

Visit Our Online Catalog

• www.primecontrols.com

QUALITY THROUGH SENSING & CONTROL TECHNOLOGY

Thank You

WORLD HEADQUARTERSPhone: +1 (937) 435-8659

vip@primecontrols.com

www.primecontrols.com