quartic a precise tof counter for the atlas forward physics project (afp)
Post on 03-Jan-2016
30 Views
Preview:
DESCRIPTION
TRANSCRIPT
Groups Involved
University of Alberta,
University of Texas at Arlington,
University College London.
Prague, Saclay, Stoneybrook,
Giessen, Manchester, Fermilab, Louvain, Kansas
INTROINTRO QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions INTROINTRO QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions
The ATLAS Forward Detectors
AFP
INTROINTRO QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions INTROINTRO QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions
The AFP Project
AFP is designed to tag forward protonsSelection rules mean that central system is (to a good approx) 0++ If you see a new particle produced exclusively with proton tags you know its QNCP violation in the Higgs sector shows up directly as azimuthal asymmetriesProton tagging may be the discovery channel in certain regions of the MSSM Tagging the protons means excellent central mass resolution (~ GeV)
Tracking detector requirementsClose to beam => edgeless detectorsHigh Luminosity => radiation hardFew micron resolution
We need to suppress pile-up (keep the rapidity gaps open)This is done by ultra-fast ToF detectors (to determine vertex)
ATLAS
INTROINTRO QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions INTROINTRO QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions
Precision timing will be required to reduce pile-up background, enabling AFP to operate at design luminosity
Backgrounds are:
Three interactions, one with a central system, and two with opposite direction single diffractive protons
Two interactions, one with a central system, and the second with two opposite direction protons
Two interactions, one with a central system and a proton, the second with a proton in the opposite direction.
James L Pinfold Manchester 2007 1
[X][p][p] [X][pp] [Xp][p]
Scales with L3 Scales with L2Scales with L2
Rationale for Fast Timing Detectors (1)
INTROINTRO QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions INTROINTRO QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions
For two protons coming from the same event:
Z-position = ½(Dt=tL - tR)c dZ-position = (c/√2)t
Aim for t = 10(20) ps Z ~ 2.1(4.2) mm (look for match with ATLAS/CMS main Z)
For t = 20 ps, we obtain a factor of 24 for the first two cases and 17 for the third.
Case (a) dominates at high luminosity, and in the case of t = 10 ps, we would expect a factor of nearly 50 rejection, enabling FP420 to operate at the design lumi.
James L Pinfold Manchester 2007 2
Rationale for Fast Timing Detectors (2)
INTROINTRO QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions INTROINTRO QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions
Baseline Plan
James L Pinfold Manchester 2007 3
Two types of Cerenkov detector are employed:GASTOF – a gas Cerenkov detector that makes a single measurement
QUARTIC – two QUARTIC detectors each with 4 rows of 8 < ~90 mm long fused silica bar allowing up to a 4-fold improvement of resolution over that of a single bar
Both detectors employ Micro Channel Plate PMTs (MCP-PMTs)
30 cm
INTRO INTRO QUARTIC Detector QUARTIC Detector Readout Testing QUARTIC Challenges Readout Testing QUARTIC Challenges Conclusions Conclusions INTRO INTRO QUARTIC Detector QUARTIC Detector Readout Testing QUARTIC Challenges Readout Testing QUARTIC Challenges Conclusions Conclusions
Micro-channel Plate PMT (MCP-PMT)
We are working with 10 micronBurle tubes at present
INTRO INTRO QUARTIC Detector QUARTIC Detector Readout Testing QUARTIC Challenges Readout Testing QUARTIC Challenges Conclusions Conclusions INTRO INTRO QUARTIC Detector QUARTIC Detector Readout Testing QUARTIC Challenges Readout Testing QUARTIC Challenges Conclusions Conclusions
QUARTIC- Alberta, FNAL, UTA
Each QUARTIC detector has 4 rows of 8 6mm x 6mm x ≤ ~10 cm long fused silica bars
The refractive index of fused silica is ~1.5 ( Cerenkov angle of 50o)
An array of bars is mounted at the Cerenkov angle to minimize the # reflections as the light propagates to the MCP-PMT.
The QUARTIC detectors will be positioned after the last 3D-Si tracking station because of the multiple scattering effects in the fused silica.
This arrangement is intrinsically rad hard
James L Pinfold Manchester 2007 5INTRO INTRO QUARTIC Detector QUARTIC Detector Readout Testing QUARTIC Challenges Readout Testing QUARTIC Challenges Conclusions Conclusions INTRO INTRO QUARTIC Detector QUARTIC Detector Readout Testing QUARTIC Challenges Readout Testing QUARTIC Challenges Conclusions Conclusions
A QUARTIC Prototype
1) Use short bars and reflective light guide
PRO: Less time dispersionCON: less light
OR 2) Use longer bars as the light guide
PRO: more lightCON: more time disp.
INTRO INTRO QUARTIC Detector QUARTIC Detector Readout Testing QUARTIC Challenges Readout Testing QUARTIC Challenges Conclusions Conclusions INTRO INTRO QUARTIC Detector QUARTIC Detector Readout Testing QUARTIC Challenges Readout Testing QUARTIC Challenges Conclusions Conclusions
QUARTIC FE-Electronics
The readout electronics must be fast with low noise to attain the best timing resolution – a single electronics channel :
Amplifier and Constant Fraction Discriminator Louvain & Alberta have a similar CFD design designed to work with rise times as short as 150 ps and to be insensitive to amp non linearity & sat.
The TDC (for the test beam we used the Phillips 7186 25 ps TDC)The baseline solution for the final detector is the HPTDC that has a ~20ps resolution – it is radiation hard and LHC compatible (a 40 MHz clock, etc)The Alberta group has designed & built an 8 ch. HPTDC prototype board
For the GASTOF detector a single photon counter (Boston Elec. SPC-134-5ps rise time ) can replace the amp+CFD+TDC ($10K/ch.)
James L Pinfold Manchester 2006 7
Combined in the ALTA approach
INTRO QUARTIC Detector INTRO QUARTIC Detector ReadoutReadout Testing QUARTIC Challenges Conclusions Testing QUARTIC Challenges Conclusions INTRO QUARTIC Detector INTRO QUARTIC Detector ReadoutReadout Testing QUARTIC Challenges Conclusions Testing QUARTIC Challenges Conclusions
QUARTIC Electronics – the CFD
Mini-module approach tuned LCFD mini-module
to Burle and Hamamatsu rise times;
12 channel NIM unit good performance : <10 ps
resolution for ≥ 4 PE’s
Remote control for threshold
ZX60 3 GHz amp
INTRO QUARTIC Detector INTRO QUARTIC Detector ReadoutReadout Testing QUARTIC Challenges Conclusions Testing QUARTIC Challenges Conclusions INTRO QUARTIC Detector INTRO QUARTIC Detector ReadoutReadout Testing QUARTIC Challenges Conclusions Testing QUARTIC Challenges Conclusions
QUARTIC Electronics – the HPTDC 12 ps resolution with
pulser;
Successfully tested at UTA laser test stand with laser / 10 m tube/ZX60 amp/LCFD
13.7 ps with split CFD signal
LCFD_Ch01_No12_spe, high level light, May 6, 2009, UTA laser test RMS resolution = 13.7 ps
0
1000
2000
3000
4000
5000
6000
800 810 820 830 840 850 860 870 880 890 900
bin number
coun
ts
INTRO QUARTIC Detector INTRO QUARTIC Detector ReadoutReadout Testing QUARTIC Challenges Conclusions Testing QUARTIC Challenges Conclusions INTRO QUARTIC Detector INTRO QUARTIC Detector ReadoutReadout Testing QUARTIC Challenges Conclusions Testing QUARTIC Challenges Conclusions
\
James L Pinfold Manchester 2006 14
A reference is obtained from the 400 MHz LHC RF converted to an optical pulse which is split and sent along fibres to both L & R detectors for each BC - pulse to pulse jitter between pulse arrival is negligible
To monitor long term drifts (e.g. T between 2 arms) the optical signal will be split at the detectors & returned to source for comparisonAt the detector stations the optical pulses are converted to electrical signals and are recorded in the detector TDCs – this conversion is envisaged to give an r.m.s (L-R) jitter of 4 ps.
Our reference timing system is designed to provide LR~5 ps
The Reference Timing System
INTRO QUARTIC Detector INTRO QUARTIC Detector Readout Readout Testing QUARTIC Challenges Conclusions Testing QUARTIC Challenges Conclusions INTRO QUARTIC Detector INTRO QUARTIC Detector Readout Readout Testing QUARTIC Challenges Conclusions Testing QUARTIC Challenges Conclusions
Testing QUARTIC
• Fermilab Test beam T958 experiment to study fast timing counters for FP420
• Used prototype detector to test concept
• Test beam at Fermilab Sep. 2006, Mar.+Jul. 2007
• CERN October 2007, June 2008
• LASER Test set up in 2009 (including 6GHz Scope)
INTRO QUARTIC Detector Readout INTRO QUARTIC Detector Readout Testing QUARTIC Testing QUARTIC Challenges Challenges Conclusions Conclusions INTRO QUARTIC Detector Readout INTRO QUARTIC Detector Readout Testing QUARTIC Testing QUARTIC Challenges Challenges Conclusions Conclusions
Timing – CERN Test-Beam 2008
Dt
56.6/1.4=40 ps/Bar including CFD!
Time difference between two 9 cm quartz bars after constant fraction discrimination is 56 ps,
implies a single bar resolution of 40 ps for about 10 PE’s (expected 10 PE’s from simulations).
Need to show improvement of resolution with # independent measurement (N)
Npe=(area/rms)2
16INTRO QUARTIC Detector Readout INTRO QUARTIC Detector Readout Testing QUARTIC Testing QUARTIC Challenges Challenges Conclusions Conclusions INTRO QUARTIC Detector Readout INTRO QUARTIC Detector Readout Testing QUARTIC Testing QUARTIC Challenges Challenges Conclusions Conclusions
The √N Effect
7/14/2009 17
16.4 ps 16.6 ps 15.7 ps
10.3 ps
Measure time difference of 3 separate fibers (100 pe’s) wrt reference tube
Correct for T0 offset, average and take new time difference wrt reference tube (expect ~9.5 get 10.3 ps )
INTRO QUARTIC Detector Readout INTRO QUARTIC Detector Readout Testing QUARTIC Testing QUARTIC Challenges Challenges Conclusions Conclusions INTRO QUARTIC Detector Readout INTRO QUARTIC Detector Readout Testing QUARTIC Testing QUARTIC Challenges Challenges Conclusions Conclusions
MCP-PMT Rate & Current LimitsWe need to establish if the MCP-PMT’s are capable of coping with the large expected rates at the LHC: up to 15 MHz in a 6mm x 6mm pixel of the MCP-PMT
The limiting factor is the current in the tube given by:
I = f(p frequency) x NPE x e x G(gain)
Using 1 MHz for low lumi conditions and 15 MHz for hi-lumi, with a gain of 5x104 (!) and 10 PE’s expected for our detector, we obtain current limits of 0.24 & 3.5 A/cm2
When the tube current is too high the gain falls - saturation
– Laser test stand test at UTA show that saturation starts around 0.4 A/cm2 for the 10 m pore size Burle MCP-PMT
Luckily, we now have access to a Burle Planicon tube with 10X higher current capability – but we still need to test it
INTRO QUARTIC Detector Readout Testing QUARTIC INTRO QUARTIC Detector Readout Testing QUARTIC Challenges Challenges Conclusions Conclusions INTRO QUARTIC Detector Readout Testing QUARTIC INTRO QUARTIC Detector Readout Testing QUARTIC Challenges Challenges Conclusions Conclusions
The Lifetime Challenge
Lifetime due to photocathode damage from positive ions is proportional to extracted charge: Q/year = I*107 sec/year
Using the current limits mentioned previously we get to 35 C/ cm2 /yr (assuming 5x104 gain) at the highest lumi
This is a factor of ~50 more than the expected tube lifetime!
We are pursuing the development of a tube with a ~50 times longer lifetime, the avenues of improvement are:
Including an ion barrier – giving a factor of 5 6
Electron scrubbing gives a factor of 5 6 (Photonis tests)
Z stack design gives a factor of ~10 improvement (NIM A598,160,09)
Arradiance coating gives a factor of ~10 improvement (under study)
INTRO QUARTIC Detector Readout Testing QUARTIC INTRO QUARTIC Detector Readout Testing QUARTIC ChallengesChallenges Conclusions Conclusions INTRO QUARTIC Detector Readout Testing QUARTIC INTRO QUARTIC Detector Readout Testing QUARTIC ChallengesChallenges Conclusions Conclusions
Conclusion
We are on track to reach the 10 micron time resolution required
More work has to determine final parameters of the detector and electronics design
We have a R&D project to solve the lifetime problem for MCPs at the highest luminosities
We are working with three major manufacturers in this area: PHOTONIS, PHOTEK and ARRADIANCE
The way forward seems well determined!
INTRO QUARTIC Detector Readout Testing QUARTIC Challenges INTRO QUARTIC Detector Readout Testing QUARTIC Challenges ConclusionsConclusions INTRO QUARTIC Detector Readout Testing QUARTIC Challenges INTRO QUARTIC Detector Readout Testing QUARTIC Challenges ConclusionsConclusions
Last Words
Photon-photon Photo-production
Proton Proton
Pomeron-Pomeron (or g-g)
INTRO QUARTIC Detector Readout Testing QUARTIC Challenges INTRO QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions Conclusions INTRO QUARTIC Detector Readout Testing QUARTIC Challenges INTRO QUARTIC Detector Readout Testing QUARTIC Challenges Conclusions Conclusions
EXTRA SLIDES
top related