queries ms. jaimie barbé. queries dodaac and uic queries in aesip
Post on 24-Dec-2015
276 Views
Preview:
TRANSCRIPT
Queries
QueriesMs. Jaimie Barbé
Queries
DoDAAC and UIC Queries in AESIP
Queries
Queries Detailed Navigation Screen
Open the Queries Menu
Queries
When the Queries Menu is opened, various query options are available.
Queries Drop Down Menu
Queries
Once the DoDAAC Query Menu is opened, there are a variety of ways to search for DoDAACs. This is a search for active DoDAACs assigned to a UIC. (This includes active DoDAACs on an inactive
UIC.) The small arrow shows where the directory can be minimized.
DoDAAC Query Menu
Queries
DoDAACs can be arranged/grouped by UIC by clicking the top arrow. You will have to scroll over
to see all the information. Click on any DoDAAC to drill down to see DoDAAC detail information.
DoDAAC Query Results
The UIC “WP0E” is added. Click the “submit” button. This will show the UICs in the WP0E series.
Queries
This is part of the DoDAAC detail. You will need to scroll over to see the rest of the information for this DoDAAC.
DoDAAC Detail
Queries
Although this option exists for research purposes, most Army units will never have the need to use it. This is for OTHER
SERVICE DoDAACs (Navy, Marines, Air Force, GSA, etc.)
Other Service DoDAAC Query
QueriesAPOD Query
APOD Query would be used to identify the Aerial Port of Debarkation. APODs are typically used for OCONUS DoDAACs (includes Puerto Rico,
Hawaii, Alaska, Guam, Virgin Islands).
Select Country Code and click “submit”.
QueriesResults of APOD Query
The valid APOD codes are shown here by location. This is a listing for all the APODs in Iraq. The system displays only a portion of the query results, so it may be necessary to scroll down to select the APOD needed.
If additional locations are needed, click on the arrow at the bottom of the screen to advance to the next set of locations.
QueriesWPOD Query
Water Port of Debarkation Query (WPOD) is identical to the APOD query to use. WPODs are typically used for OCONUS
DoDAACs (includes Puerto Rico, Hawaii, Alaska, Guam, Virgin Islands).
Select Country Code and click “submit”.
QueriesWPOD Query Results
Four WPODs are identified for “Iraq”. WPODs are pre-established for deployment. However, if you need to identify a WPOD, this is the process.
QueriesSPLC Query
NOTE: The SPLC (Standard Point Location Code) should always be identified prior to establishing a BBP, moving a BBP, or changing an existing BBP on a DoDAAC to ensure that the correct SPLC is populated on the record. Start by selecting “SPLC Query”. SPLCs apply to CONUS DoDAACs only.
Queries
Enter the city and click “submit”.
SPLC Query by City
QueriesSPLC Query Results
Click on the top arrow to group by state. (In some cases, there are states that have
cities with the same name.)
QueriesSPLC Query Within State
Once the correct state is identified, identify the county that corresponds to the
street address.
Queries
Once you have identified all the correct information, click to highlight the line as a
reference and scroll back to select the SPLC code.
Identifying the Correct SPLC
QueriesSPLC Number Query
If you know a SPLC, but are uncertain of where it is located, enter the SPLC number
and click “submit”.
Queries
The same SPLC can be used for multiple locations. In this example, the SPLC is assigned to Platte
County, MO. There are seven cities within that area that use the same SPLC.
SPLC Number Query
QueriesSPLC Query by County
If only the county is known, enter the county name and click “submit”.
Queries
This query returned 719 locations in 20 states. At this point, you can
group by state to narrow the search. Click on down arrow to group
states.
SPLC Query by County
Queries
UIC query is used to determine UIC related information, including unit name, OESTS date, TPSN and date of last
action. Query may be performed by individual UIC or for an entire UIC series. Select “UIC Query”.
UIC Query
QueriesUIC Query Detail
Enter the UIC or UIC series. Then hit “submit”.
NOTE: In this example, you are looking at the entire W8S0 series.
Queries
This query lists UICs in the W8S0 series. It identifies Iowa Field Maintenance Shops (FMS) 1 through 15. As the
screen will display only 10 at one time, scroll down and select the down arrow to see remaining UICs.
UIC Query Search Results
QueriesUIC Query (Scroll Down)
You must scroll to the bottom of the page to find the down arrow which will allow you to advance to
additional records retrieved in the query results.
QueriesUIC Query (Scroll Down)
This page shows the remaining UICs under W8S0 series after advancing to the next set of query results.
Queries
Questions?
Queries
top related