questionnaire primary flow elements - wika...design: isa 1932 long radius tappings: ½" npt...

09/2018 Page 1 of 3

Flow measurement

QuestionnairePrimary flow elements

Customer data

CompanyName

Address

DatePhoneE-mail

Plant or project Tag no.

WIKA reference quotation

Fluid

Single-phase Multi-phase

Liquid

Gas

Steam

Gas/liquid ratio (in %): Volume Mass

Density (at operating conditions): kg/m³ lb/ft³Viscosity: cP cST

MW: Cp/cv: SG:Compressibility factor: Viscosity: cP cST

Superheated Saturated, dry Saturated, wet (water content 0 ... 5 %) %

Minimum Normal Maximum Full scale Units

barg psig mmH2Og °C °F

Schedule or WT Nominal pressure rating Pipe MaterialNominal sizeSealing face: Raised face (RF) Flat face (FF) Ring-type joint (RTJ)

Commercial information

Fluid characteristics

Process data

Pipeline and piping class

Origin of Material

Competitors

Target price € $(Please specify amount)

Flow rate Pressure Temperature Design pressure Design Temperature

No restriction With restriction (e.g. no China, India, ecc.)Please specify

Amount:

Other:

Design: Square edge

Page 2 of 309/2018

Pressure taps: Flange taps Corner taps

Tappings: ½" NPT ½" SWMaterial of nuts and studs:

Pressure taps: Corner taps Flange tapsTappings: ½" NPT ½" SW Other:Material: Stainless steel 316/316L Other:Process connection: Butt welded Flanged 1)

Design: ISA 1932 Long radiusTappings: ½" NPT ½" SW Other:

Number of pressure taps:

Material: Stainless steel 316/316L Other:Mounting option, ISA 1932: With flanges Without flangesProcess connection, Long radius: Butt welded Flanged 1)

Design: From bar Welded sheetMaterial: Stainless steel 316/316L Carbon steel Other:

Exit cone: 7° 15° Other: Truncated

Tappings: ½" NPT ½" SW Other:

Flanged Dimensions:

Number of pressure taps: Process connection: Butt welded Flanged 1)

Mounting types: Compression fitting Flanged version Extractable versionVariants (series): 73 75 78

End support: No Yes

Design: Square edge Quarter circle Eccentric Conical entranceMaterial: Stainless steel 316/316L Other:Drain hole, vent hole: None Drain hole Vent hole

Orifice flange Orifice assembly (orifice plate and orifice flange)

Flow nozzle

Meter run Integral orifice

Pitot tube (FloTec)

Venturi tube

Orifice plate

Model of primary flow element

1) Flange rating and sealing face see “Pipeline and piping class” (page 1)

Compact orifice

Conical entranceAccessories: 3-way valve manifold 5-way valve manifold

Temperature probe

Body material:

Wedge material:

Pressure taps:

Process connection:

09/2018 Page 3 of 3

WIKA Alexander Wiegand SE & Co. KGAlexander-Wiegand-Straße 3063911 Klingenberg/GermanyTel. +49 9372 132-0Fax +49 9372 132-406info@wika.dewww.wika.de

1) Flange rating and sealing face see “Pipeline and piping class” (page 1)

Wedge Meter

Model of primary flow element

OtherOther

Stainless steel 316/316L Stainless steel 316/316L

Carbon steelCarbon steel

2"

Butt welded

3"

Cone Meter

OtherOther

Stainless steel 316/316L Carbon steel

1/2" NPT

Body material:

Cone material:

Pressure taps:

Process connection: Butt welded

1/2" SW Stainless steel 316/316L

Other

Flanged 1)

Flanged 1)