quick start guide - zendesk...reach us via email : support@concepter.co the cold shoe mount is...

Quick Start Guide

Designed by

contents

11

IBLAZR 2 ANATOMY 3

what`s inside? 3

3Getting Started

4Bluetooth mode Native App

5Bluetooth mode Shotlight App

6Keep your iblazr 2 updated

7Video Light Mode

7Change the iblazr2 light temperature

8Check the battery level

8Strob mode

Silicon Diffuser

cold shoe mount

Smartphone clip

9

10

11Support

what`s inside?

IBLAZR 2 ANATOMY

Getting Started

Step 1: Charge iblazr 2 using the Micro USB cable. Step 2: LED’s indicate:

Micro USBconnector

4 LEDsTouch sensor

surface Indicator

Modebutton

— 1 LED < 25% battery level

— 2 LEDs = 25%-50% battery level

— 3 LEDs = 50%-75% battery level

— 4 LEDs > 75% battery level

Smartphone clip Key claspiblazr 2 Silicon diffuser USB charger

3

Bluetooth mode Native App

Step 1: Push the button on iblazr 2. Flash status LED starts blinking.

Step 4: Double tap the flash to take a picture.

Step 2: Connect to iblazr in Bluetooth connections list. Once connected, the flash status LED light will start to shine continuously.

Step 3: Open smartphone native camera.

x2

4

Bluetooth mode Shotlight App

Step 1: Download the Shotlight app on App Store or Play Market.

Step 2: Turn on the Bluetooth in smartphone settings.

Step 4: Launch the Shotlight app. Step 5: Tap the flash icon in the app. Step 6: Tap “Add iblazr” icon and connect your iblazr.Step 7: Start capturing great pictures and videos!

Step 3: Push the button on iblazr 2. The flash status LED starts blinking.

5

Step 1: Launch the Shotlight app. Step 2: Go to main menu.

Step 4:  If the new update is available, just tap to download.Step 3: Choose "Devices" from the menu list.

Keep your iblazr 2 updated

6

Video Light Mode

Change the iblazr2 light temperature(Native App mode)

To active the video light mode of iblazr 2, simply press the button two times for low light output and three times for high light output.

Step 1: Activate the video light mode (see the chapter "Video Light Mode")

Step 2: Lift your finger up to raise the light temperature. Lower your finger to decrease the light temperature. The temperature will remain the same until your next use.

Mode Output Runtime

Low 2x smartphone 60 minutes

High 8x smartphone 25 minutes

7

Additional Function: Check the battery level

Step 1: Push the button to wake up iblazr 2. Step 2: Hold the button for three seconds to check the battery level. Step 3: LED’s indicate:

Step 1: Push the button a few times, LEDs should start blinking.

Step 2: Hold the button for three seconds. Step 3: LEDs start blinking. Step 4: Push the button to turn off the strobe

Strobe mode

— 1 LED < 25% battery level

— 2 LEDs = 25%-50% battery level

— 3 LEDs = 50%-75% battery level

— 4 LEDs > 75% battery level

8

hold

Accessories:Silicon Diffuser

Step 2: Attach the diffuser to the key clasp and to take iblazr 2 with you.

Step 3: Attach the diffuser to the smartphone clip.

Step 1: Put iblazr 2 inside the diffuser

Diffuser is an essential accessory that has two main functions: It diffuses the light, making it more soft. Highly recommended for selfies and advanced users. It could be attached to the key ring and hold your LED flash wherever you are.

9

Accessories:Smartphone Clip

Step 1: Attach the clip to smartphone or tablet.

Step 2: Mount iblazr 2 to the other side of the clip.Step 3: Turn your iblazr to take a selfie.

Step 4: The clip can be also used with the diffuser.

Smartphone clip is made both for iblazr2 LED flash and your smartphone. It holds the flash firmly and allows to use sensor of the iblazr2. The smartphone clip works with smartphones, tablets or even laptop (try using it with skype at night) that is 0.24" to 0.37" (6 mm to 9.5 mm) wide. Also it has a silicon coating, that protects the smartphone from scratches.

10

Support

Accessories:Cold Shoe Mount (optional)

Step 1: Slide the cold shoe mount inside the flash of the digital camera.

Step 2: Use iblazr 2 in the video light mode to capture awesome videos.

Step 3: Cold shoe mount is suitable with the silicon diffuser.

Get in touch with us in Shotlight App. Tap Menu > Support. Reach us via email : support@concepter.co

The cold shoe mount is universal mount for DSLRs and compact cameras that have hot shoe mount. iblazr2 is awesome for making short videos, that is why we made a mount for you lovely camera as well.

11