request for quotations: printing and delivery of 2022 (s1
Post on 14-Feb-2022
2 Views
Preview:
TRANSCRIPT
1
Request for Quotations:
Printing and Delivery of 2022 (S1) Study
Materials
Procurement Reference No: G/RFQ/UNAM-88/2021
BIDDER’S NAME: _____________________________________________________
PHYSICAL ADDRESS: _____________________________________________________
TEL/CELL NO: _____________________________________________________
CONTACT PERSON: _____________________________________________________
E-MAIL: _____________________________________________________
Closing Date: 16 November 2021 – 12h00
To be deposited in the Tender Box located at Administration
Building, Ground Floor.
University of Namibia, P/Bag 13301, Mandume Ndemufayo Street, Pionierspark, Tel: +26461 2064588
Email: procurement@unam.na
1
Letter of Invitation
G/RFQ/UNAM-88/2021 01 NOVEMBER 2021
Dear Prospective Suppliers,
Request for Sealed Quotations: Printing and Delivery of 2022 (S1) Semester 1 Study
Materials
The University of Namibia invites you to submit your best quote for the goods described in detail in
in the specifications section. Any resulting contract shall be subject to the terms and conditions
referred to in the document.
Queries, if any, should be addressed to Mr Embrochius Petersen, at email: epetersen@unam.na,
Tel: 061 206 3080
Please prepare and submit your quotation in accordance with the instructions given or inform the
undersigned if you will not be submitting a quotation.
Yours faithfully,
Mrs. Veronica Mungonena
Assistant Bursar: Procurement
2
SECTION I: INSTRUCTIONS TO BIDDERS
1. Rights of Public Entity
The University of Namibia reserves the right:
(a) to split the contract as per the lowest evaluated cost per site, or
(b) to accept or reject any quotation or to cancel the quotation process; and
(c) reject all quotations at any time prior to contract award.
2. Preparation of Quotations
You are requested to quote for the services mentioned in Section III, by completing,
signing and returning:
(a) the Quotation Letter in Section II with its annex for Bid Securing Declaration, where
applicable;
(b) the Priced Activity Schedule in Section IV;
(c) the Specifications and Performance Standards in Section V; and
(d) any other attachment as deemed appropriate.
You are advised to carefully read the complete Request for Quotations document, including
the Contract Data Sheet in Section VII, before preparing your quotation. The standard forms
in this document may be retyped for completion but the Bidder is responsible for their
accurate reproduction.
Prospective buyers can view samples of the study guide at the offices below:
• Administration Building - Access Control Officer on the Ground Floor
• Chief Buyers Office – 2nd Floor Office No. Z227
2. Validity of Quotations
The Quotation validity period shall be 90 days from the date of submission deadline.
3. Eligibility Criteria
To be eligible to participate in this Quotation exercise, you should:
(a) have a valid company Registration Certificate;
(b) have an original valid good Standing Tax Certificate;
(c) have an original valid good Standing Social Security Certificate;
(d) have a valid certified copy of Affirmative Action Compliance Certificate, proof
from Employment Equity Commissioner that bidder is not a relevant employer, or
exemption issued in terms of Section 42 of the Affirmative Action Act, 1998;
(e) Submit signed Bid-securing Declaration.
(f) An undertaking on the part of the Bidder that the salaries and wages payable to its
personnel in respect of this proposal are compliant to the relevant laws,
Remuneration Order, and Award, where applicable and that it will abide to sub-
3
clause 4.6 of the General conditions of Contract if it is awarded the contract or part
thereof.
4. Bid Securing Declaration
Bidders are required to subscribe to a Bid Securing Declaration for this procurement
process.
5. Delivery
Delivery shall be 20 days after acceptance/issue of Purchase Order. Deviation in delivery period
shall be considered if such deviation is reasonable.
6. Sealing and Marking of Quotations
Quotations should be sealed in a single envelope, clearly marked with the Procurement
Reference Number, addressed to the Public Entity with the Bidder’s name and contact
information at the back of the envelope.
7. Submission of Quotations
Quotations should be deposited in the Bid Box located at The University of Namibia Main
Campus, Ground Floor, Administration Building, Mandume Ndemufayo Street,
Pionierspark. not later than 16 November 2021 – 12h00. Quotations by post or hand
delivered should reach same address by the same date and time at latest. Late quotations
will be rejected.
Quotations received by e-mail will not be considered.
8. Opening of Quotations
Quotations will be opened internally by the Public Entity immediately after the closing time
referred to in instruction 6 above. A record of the Quotation Opening stating the name of the
bidders, the amount quoted, the presence or absence of a Bid Securing Declaration, will be
posted on the website of the Public Entity and available to any bidder on request within
three (3) working days.
9. Technical Compliance
Bidders shall submit along with their quotation’s documents, a copy of a sample study
guide for Counselling and Wellness in the Workplace (CEH2652).
As soft copy of the study guide can be requested from ckanyama@unam.na
The Specifications, Performance Requirements and Compliance Sheet details the minimum
specifications of the goods/items to be supplied. The specifications have to be met but no
credit will be given for exceeding the specifications.
10. Prices and Currency of Payment
Prices shall be fixed in Namibian Dollars.
11. Award of Contract
4
The Bidder having submitted the lowest evaluated responsive quotation and qualified to
supply the goods/items and related services shall be selected for award of contract. Award
of contract shall be by issue of a Purchase Order/Letter of Acceptance in accordance with
terms and conditions contained in Section VI: Contract Agreement and General Conditions
of Contract.
12. Notification of Award and Debriefing
The University of Namibia shall after the award of contract promptly inform all
unsuccessful bidders in writing of the name and address of the successful bidder and the
contract amount and post a notice of award on its website within seven (7) days.
Furthermore, the Public Entity shall attend to all requests for debriefing made in writing
within seven (7) days of the unsuccessful bidders being informed of the award.
5
SECTION II: QUOTATION LETTER (to be completed by Bidders)
Complete this form with all the requested details and submit it as the first page of your quotation
with the Price list and documents requested above. A signature and authorisation on this form will
confirm that the terms and conditions of the RFQ prevail over any attachments. If your quotation
is not authorised, it will be rejected.
Quotation addressed to: University of Namibia
Procurement Reference Number: G/RFQ/UNAM-88/2021
Subject matter of Procurement: Printing and Delivery of 2022 (S1) Study
Materials
We offer to supply the items listed in the attached List of Goods and Price Schedule as per the
defined specifications and in accordance with the terms and conditions stated in your Request for
Quotations referenced above.
We confirm that we are eligible to participate in this Quotation exercise and meet the eligibility
criteria specified in Section 1: Instruction to Bidders
We undertake to abide ethical conduct during the procurement process and the execution of any
resulting contract.
We have read and understood the content of the Bid Securing Declaration (BSD) attached hereto
and subscribe fully to the terms and conditions contained therein. We further understand that this
subscription could lead to disqualification on the grounds mentioned in the BD.
The validity period of the Quotation is _________ days [insert number of days] from the date of
the bid submission deadline.
We confirm that the prices quoted in the List of Goods and Price Schedule are fixed and firm and
will not be subject to revision or variation, if we are awarded the contract prior to the expiry date
of the quotation validity.
The delivery period offered from the date of issue of Purchaser Order/ Letter of Acceptance is as
shown in the List of Goods items and Price Schedule.
Quotation Authorised by:
Name of Bidder Company’s Address and seal
Contact Person
Name of Person Authorising the Quotation:
Position: Signature:
Date Phone No./Fax
6
6
Appendix to Quotation Letter
BID SECURING DECLARATION (Section 45 of Act)
(Regulation 37(1)(b) and 37(5))
Date: ........................
Procurement Ref No.: G/RFQ/UNAM-88/2021
To: University of Namibia
I/We* understand that in terms of section 45 of the Act a public entity must include in the bidding
document the requirement for a declaration as an alternative form of bid security.
I/We* accept that under section 45 of the Act, I/we* may be suspended or disqualified in the event of
(a) a modification or withdrawal of a bid after the deadline for submission of bids during
the period of validity;
(b) refusal by a bidder to accept a correction of an error appearing on the face of a bid;
(c) failure to sign a procurement contract in accordance with the terms and conditions set
forth in the bidding document, should I/We* be successful bidder; or
(d) failure to provide security for the performance of the procurement contract if required
to do so by the bidding document.
I/We* understand this bid securing declaration ceases to be valid if I am/We are* not the successful
Bidder
Signed: .................................................................................................................................................. [insert signature of person whose name and capacity are shown]
Capacity of: [indicate legal capacity of person(s) signing the Bid Securing Declaration]
Name: ................................................................................................................................................... [insert complete name of person signing the Bid Securing Declaration]
Duly authorized to sign the bid for and on behalf of: [insert complete name of Bidder]
Dated on ____________ day of __________________, _______ [insert date of signing]
Corporate Seal (where appropriate)
[Note*: In case of a joint venture, the bid securing declaration must be in the name of all partners to
the joint venture that submits the bid.]
7
7
Republic of Namibia
Ministry of Labour, Industrial Relations and Employment Creation
Written undertaking in terms of section 138 of the Labour Act, 2015 and section 50(2)(D) of
the Public Procurement Act, 2015
1. EMPLOYERS DETAILS
Company Trade Name:………………………………………………………
Registration Number :…………………………………………………...
Vat Number: …………………………………………………………………
Industry/Sector: ………………………………………………………………
Place of Business:……………………………………………………………..
Physical Address:……………………………………………………………..
Tell No.:………………………………………………………………………
Fax No.:……………………………………………………………………….
Email Address:………………………………………………………………..
Postal Address:………………………………………………………………..
Full name of Owner/Accounting Officer:……………..……………………...
…………………………………………………………………………….......
Email Address:………………………………………………………………..
8
8
2. PROCUREMENT DETAILS
Procurement Reference No.:……………………………………………………..
Procurement Description: ………………………………………………………..
……………………………………………………………………………………
……………………………………………………………………………………
Anticipated Contract Duration: ………………………………………………….
Location where work will be done, good/services will be delivered: …………..
……………………………………………………………………………………
3. UNDERTAKING
I ……………………………………………[insert full name], owner/representative
of ………………………………………………………….[insert full name of company]
hereby undertake in writing that my company will at all relevant times comply
fully with the relevant provisions of the Labour Act and the Terms and Conditions of Collective
Agreements as applicable.
I am fully aware that failure to abide to such shall lead to the action as stipulated in section 138 of
the labour Act, 2007, which include but not limited to the cancellation of the
contract/licence/grant/permit or concession.
Signature: ……………………………..
Date: …………………………………..
Seal:…………………………………….
Please take note:
1. A labour inspector may conduct unannounced inspections to assess the level of compliance
This undertaking must be displayed at the workplace where it will be readily accessible and visible by the employees rendering service(s) in relations to the goods and services being procured under this contract.
9
9
SECTION III: LIST OF GOODS AND PRICE SCHEDULE
QUOTATION FOR: Printing and Delivery of 2022 Study Materials Procurement Ref No. G/RFQ/UNAM/88-2021
INSTRUCTIONS TO THE PUBLIC ENTITY INSTRUCTIONS TO BIDDERS Bidders shall fill-in columns E - I and fill the total
E= mark with a *if an equivalent is quoted
F= Rate per unit G=Total price for one item ( C x F)
• If an equivalent is quoted, please attach to your quote appropriate
technical information & specification
• Bidders shall fill in and sign the bottom section of this page
A B C D F G I
Item
no.
Description of Goods QTY Unit of
measures
Unit Price
NAD1
Total price
without VAT
NAD
Lead Time
(Weeks/Months)
1. PRINTING AND DELIVERY OF 2022 (S1)
STUDY MATERIALS
PLEASE REFER TO ANNUXERE 1-7 FOR THE
COURSE LIST
SUB TOTAL
VAT @ 15%
TOTAL
NAME: Date:
SIGNATURE:
NAME OF BIDDER:
Key notes: NA=NOT APPLICABLE, NQ=NO QUOTE
10
10
SECTION IV: SPECIFICATIONS AND PERFORMANCE
REQUIREMENTS
SECTION V: SPECIFICATIONS AND COMPLIANCE SHEET
Procurement Reference Number: G/RFQ/UNAM-88/2021
Bidders should complete columns C and D with the specification of the goods offered. Also,
state “comply” or “not comply” and give details of any non-compliance/deviation to the
specification required. Attach detailed technical literature if required. Authorise the
specification offered in the signature block below.
Specifications and Compliance Sheet Authorised By:
Name: Signature:
Position: Date:
Authorised for and on behalf of: Company
Item
No Specification Required Compliance of
Specification
Offered
Details of Non-Compliance/
Deviation
(if applicable)
A* B* C D
1. Perfect Binding for all guides with 60
pages and above
2. Digital printing for all guides
3. Consultation and feedback required on
quality issues and page number
matching
4. Assistance with quality of artwork
5. Signing of sample study guides (below and
above 60 pages)
6. Frequent delivery as per signed off batches
7. Barcode Identifications on all guides
8. A supplier representative present during
every delivery verification
9. Immediate invoicing after delivery
11
11
SECTION VI: GENERAL CONDITIONS OF CONTRACT AND
CONTRACT AGREEMENT
Any resulting contract shall be placed by means of a Purchase Order/Letter of Acceptance and
shall be subject to the General Conditions of Contract (GCC) for the Procurement of Goods - Ref.
G/RFQ-GCC on the website of the Public Entity https://www.unam.edu.na except where
modified by the Special Conditions below.
SECTION VIII: SPECIAL CONDITIONS OF CONTRACT
Procurement Reference Number: G/RFQ/UNAM-88/2021
The clause numbers given in the first column correspond to the relevant clause number of the
GCC.
Subject and GCC
clause reference
Special Conditions
Purchaser
GCC 1.1(h)
University of Namibia
Site
GCC 1.1(m)
University of Namibia
CODeL
Mandume Ndemufayo Street,
Pionierspark
Windhoek
Incoterms Edition
GCC 4.2(b)
Incoterms shall be governed by the rules prescribed in Incoterms 2010.
Notices
GCC 8.1
Any notice shall be sent to the following addresses and the contact name
shall be: Mr Consarve Kanyama, ckanyama@unam.na
Disputes
GCC 10.2
The rules of procedures for arbitration proceedings pursuant to GCC 10.2
shall be as follows:
_________________________________
Delivery and
Documents
GCC 13.1
Bidders shall indicate the possible duration required for the full delivery of
the items in accordance with calendar days from the date the Purchase Order
or Letter of Acceptance is issued. Our preferred delivery time should not
exceed 35 calendar days.
The documents to be furnished by the Supplier are:
(a) signed delivery note;
(b) Invoice
Price Adjustment
GCC 15.1
The price charge for the Goods supplied and the related Services performed
shall not be adjustable.
12
12
Subject and GCC
clause reference
Special Conditions
Terms of Payment
GCC 16.1
The structure of payments shall be: full payment following delivery of the
Supplies and submission of an invoice and the documents listed in clause
13.1
Terms of Payment
GCC 16.3
Payments shall be made not later than thirty days after submission of an
invoice and its certification by the Purchaser.
Terms of Payment
GCC 16.4 (a)
The price shall not be adjustable
Payment Period
GCC 16.5
The method and conditions of payments to be made to the Supplier under this
Contract shall be as follows:
On Acceptance: The Contract Price of goods received shall be paid no later
than thirty (30) days of receipt of the Goods upon submission of an invoice
(showing Purchaser’s name; the Procurement Reference number, description
of payment and total amount, signed in original, stamped or sealed with the
company stamp/seal) supported by the Acceptance Certificate issued by the
Purchaser.
Performance
Security
GCC 18.1
No performance security is required.
Discharge of
Performance
Security
GCC 18.4
Not applicable
Packing
GCC 23.2
The packing, marking and documentation within and outside the packages
shall be: Appropriate to ensure that the qualities of the goods are not
compromised.
Insurance
GCC 24.1
As per DDP incoterm
Transportation
GCC 25
The Goods shall be delivered: DDP
Inspection and Test
GCC 26.1
The inspection and tests shall be: at F- Block, CODeL – Unam Main
Campus. CODeL will inspect the goods upon receipt to ascertain the
quality and quantity are as specified.
Location of
Inspection and
Tests
GCC 26.2
The inspections and tests shall be conducted at: F – Block CODeL,
Unam - Main Campus
Liquidated
Damages
GCC 27.1
Liquidated damages for the whole contract are 4% per day. The maximum
amount of liquidated damages for the whole contract is 4% of the final
contract price.
13
13
Subject and GCC
clause reference
Special Conditions
Warranty
GCC 28.3
The period of validity of the warranty shall be: 3Years
For the purpose of the Warranty, the place(s) of the final destination(s) shall
be: F – Block CODeL, Unam Main Campus
Repair and
Replacement
GCC 28.5
The period for repair or replacement shall be: 30 days
14
14
SCHEDULE 1 QUOTATION CHECKLIST SCHEDULE
Procurement Reference No.: G/RFQ/UNAM-88/2021
Description
Attached
Not
Attached
Quotation Letter
List of Goods and Price Schedule
Specification and Compliance Sheet
Bid Securing Declaration
Valid Company Registration Certificate
Valid Company Good Standing Social Security Certificate
Valid Company Good Standing Tax Certificate (Receiver of
Revenue)
Valid certified copy of Affirmative Action Compliance Certificate,
Proof from Employment Equity Commissioner that bidder is not a
Relevant employer, or exemption issued in terms of Section 42 of
Affirmative Action Act, 1998
Evidences for conformity of Goods (Sample)
Disclaimer: The list defined above is meant to assist the Bidder in submitting the relevant
documents and shall not be a ground for the bidder to justify its non-submission of major
documents for its quotation to be responsive. The onus remains on the Bidder to ascertain that it
has submitted all the documents that have been requested and are needed for its submission to be
complete and responsive.
15
15
ANNEXURE 1.
CO DE MO DULE
No. of
Pages No. of Prints
DIPLO MA IN ENTREPRENEURSHIP AND NEW VENTURE MANAGEMENT
ABM2411 Basic Mathematics 216 50
MEM2471 Basic of Entrepreneurial Mind 236 50
MEO2471 New Venture Creation 1A 228 50
EMI3571 Basic Micro Economics 118 100
MEL2571 The Entrepreneurial Leader and Team 84 50
MPV2531 Planning the Venture 2 163 50
MVM2571 New Venture Management 1A 223 50
DIPLO MA IN LO CAL GO VERNMENT STUDIES
PLG2471 Introduction to Local Government 108 50
PNS2471 Basic Numeracy and Statistics 296 50
PPF2571 Local Government Policy Formulation & Evaluation 148 50
PGA2571 Local Government Accounting II 124 80
PMM2571 Project Development and Management 264 50
PLA2571 Local Sustainable Development 194 50
DIPLO MA IN ACCO UNTING AND AUDITING
AFA2411 Basic Financial Accounting A 136 50
BCM3571 Business Mathematics 276 100
AFE3581 Fundamentals of Accounting A 384 100
ACL3631 Commercial Law A 380 50
ABA3691 Business Statistics A 106 200
AIS3659 Computerized Accounting Systems 248 100
AFE3691 Financial Accounting 1A 280 120
AAM3691 Management Accounting 1A 468 80
APG2631 Public Sector and Government Accounting 400 80
First Semester, Year Courses and Core Modules -2020
16
16
ANNEXURE 2.
CO DE MO DULE
No. of
Pages No. of Prints
BACHELO R O F ACCO UNTING (HO NO URS)
AFE3781 Financial Accounting 2A 291 80
AAM3781 Management Accounting 2A 246 60
AUA3751 Auditing 1A 108 85
ACP3751 Company Law and Practice 220 80
AUA3871 Auditing 2 296 25
AFE3871 Financial Accounting 3A 259 45
AMF3871 Financial Management A 285 25
BACHELO R O F BUSINESS ADMINISTRATIO N (HO NO URS)
MBO3671 Organizational Behaviour 1 256 155
MBF3781 Banking and Finance 1A 268 40
MRE3781 Entrepreneurship 1A 166 40
MSM3781 Marketing Management 1A 149 40
MHM3781 Human Resource Management 1A 129 50
MHM3851 Strategic Human Resource Management 2A 142 50
MSM3851 Strategic Marketing 2A 192 50
MBF3851 Banking & Finance 2A 245 80
MST3881 Strategic Management A 200 25
DIPLO MA IN LIFELO NG LEARNING AND CO MMUNITY EDUCATIO N
AFA2480 Introduction to Foundations of Adult Education 151 100
AID2480 Instructional Design 1 190 85
AID2480 Instructional Design 2 60 100
ASD2400 Introduction to Education for Sustainable Development 276 140
AML2400 Intro to Mathematics Literacy 287 120
AES2501 Introduction to Entrepreneurship 130 100
AHP3511/AHP2511 Historical & Philosophical Foundations of Adult Education 116 145
ACD3501/ACD2521 Community Development Studies 1 117 140
AMS3501/AMS2501 Management Studies 1 130 140
ASP3501/ASP2501 Sociology of Adult Education 102 150
APT2580/APT3580 Curriculum, Primer Design & Teaching 137 150
AEP3601/AEP2601 English for Lifelong Learners and Community Educators 1 270 135
AER3701/AER2701 Principles of Adult Education Research 114 150
ASD3601/ASD2601 Education for Sustainable Development 2 148 150
ACT2721/ACT3721 IMTE for Adult Education 173 145
AMS3610/AMS2610 Management Studies 2 156 125
ACD2610/ACD3610 Community Development Studies 2 151 150
First Semester, Year Courses and Core Modules -2020
17
17
ANNEXURE 3.
CO DE MO DULE
No. of
Pages No. of Prints
BACHELO R IN EDUCATIO N (LIFELO NG LEARNING AND CO MMUNITY EDUCATIO N)
AFR3701 Educational Research 1 95 50
ALL3711 Lifelong Learning 172 145
AEC3731 Economics in Adult Education 171 115
AET3711 Entrepreneurship 248 100
AMS3710 Management Studies 3 339 85
ACD3710 Community Development Studies 3 324 140
AIN3891 Internship 113 125
AMP3811 Project Management 238 85
APS3811 Policy Studies in Adult Education 147 95
AMD3810 Management of Lifelong Learning and Sustainable Development 232 145
ACD3810 Community Education and Training for Sustainable Development 153 145
APP3880 Educational Research Report 70 85
DIPLO MA IN EDUCATIO NAL MANAGEMENT AND LEADERSHIP
AFI3701/CFI4701 Introduction to Educational Research 160 25
FMM4701 Project Phase 1 142 25
FMH4781Human Resources Management
196 25
DIPLO MA IN SECO NDARY EDUCATIO N (PRO FESSIO NAL TRAINING)
WHAT SHO ULD BE PRINTED
CFU3721/CFP3721/CFE4701/CF
E3701Assessment and Evaluation of Learning
250 400
CFP3781/CFU3781/CFS4621 Educational Research 157 100
CFS4621 Integrated Media and Technology Ed 1 84 85
CFS3729 Integrated Media and Technology 2 112 150
CLE3700/CLE4700 Teaching Methods of English Module 1 111 50
CLE3700/CLE4700 Teaching Methods of English Module 2 106 50
CLE3700/CLE4700 Teaching Methods of English Module 3 101 50
First Semester, Year Courses and Core Modules -2020
18
18
ANNEXURE 4.
CO DE MO DULE No. of Pages No. of Prints
BACHELO R O F EDUCATIO N (PRE- AND LO WER PRIMARY)
LLU3501/LLP3501 Language in Society 185 300
LLP3521 Children’s Literature 1 160 100
MMP3500 Mathematics and Numeracy Development 1 216 50
MPU3620/MPP3620 Physical and Health Education 1 212 450
PSU3721/PSP3721 Childhood Learning 49 350
MSP3500 Environmental Education 1 211 250
MSP3600 Environmental Education 2 239 300
MMP3600 Numeracy and Mathematics Education 2 47 210
LEP3600 English Language Education 2 196 300
LRU3521 Religious and Moral Education 52 200
MSP3720 Environmental Education 3 47 55
LEP3700 English Language Education 3 195 220
LED3800 English Language Education 4 BOOK A 172 250
MMD3880 Learning Support in the Mathematics Classroom* 80 245
CFD3880 Assessment and Evaluation 232 200
FMD3880 School Leadership and Management 173 185
CCD3880 Curriculum Planning and Development 169 150
LKP3600 Khoekhoegowab Language Education 2 219 50
LWP3600 Oshikwanyama Language Education 2 80 45
LOP3600 Oshindonga Language Education 2 88 45
LSP3600 Rukwangali Language Education 2 109 45
LAP3700 Afrikaans Language Education 3 295 45
LKP3700 Khoekhoegowab Language Education 3 219 45
LRP3600 Rukwangali Language Education 2 109 45
MPP3721/MPU3780 Physical and Health Education 2 394 200
First Semester, Year Courses and Core Modules -2020
19
19
ANNEXURE 5.
CO DE MO DULE
No. of
Pages No. of Prints
BACHELO R O F EDUCATIO N (SECO NDARY)
PSU3741/PSI4701/PSI3701 Inclusive Education 151 265
LAF3581 Afrikaans Language Usage 164 65
LAF3611 Afrikaans Linguistics 224 65
LAF3631 Foundations of Dutch Language and Literature 180 50
LAF3860 Afrikaans and Dutch Novel and Drama 174 45
EMA3671 Intermediate Macro-Economics I 117 100
EMI3671 Intermediate Micro-Economics I 196 110
EIT3771 International Trade 351 55
LEN3581 Fundamentals of English Language Studies 272 70
LEN3611 Lexis and Basic Grammar 332 120
LEN3631 Approaches to Poetry Analysis 238 85
LEL3820 An Overview of African Literature * 582 85
LEN3820 Approaches to Stylistics 266 150
LEN3840 Approaches to Language Analysis * 368 125
VPD3581 Principles of Design 1 202 55
VTF3600 Textiles and Fashion Basics 234 50
VTS3611 Textiles, Dyed, Painted and Printed 430 50
VFS3611 Fashion Studies 1 106 25
HGE3581 African Civilisation 118 85
HGE3651 Early Southern Africa History 158 125
HGE3611 The Making of the Atlantic World 359 125
HGE3751 Namibia 1920 - 1990 182 125
HGE3820 Public History/Museum and Heritage Studies 220 125
MHE3501 Applied Science for Home Economics 136 55
MHE3511 Intro to Household Resource Management 200 50
MHE3611 Household Resource Management 124 60
MHE3711 Applied Nutrition 248 75
MAT3511 Basic Mathematics 184 125
MAT3521 Matrices and Complex Numbers 168 20
MAT3501 Analytic Geometry 168 20
MAT3611 Calculus 1 256 80
MAE3771 Function of Single Variables I 116 75
BLG3511 Introduction to Biology 301 65
MBE3771 Cell Molecular Biology, Microbiology and Genetics for Educators 156 85
PHY3511 Physics for Physical Science I 456 95
CHM3511 Chemistry IA 244 100
PHE3751 Modern Physics for Educators 176 110
First Semester, Year Courses and Core Modules -2020
20
20
ANNEXURE 6.
CO DE MO DULE
No. of
Pages No. of Prints
BACHELO R O F EDUCATIO N (UPPER PRIMARY) HO NO URS
CFU3749 Curriculum Studies-(Use Curriculum Planning and Development) 169 150
LAU3611 Afrikaans Language Education 2A 105 50
LKU3611 Khoekhoegowab Language Education 2A 97 45
LHU3611 Otjiherero Language Education 2A 125 25
MAU3681 Agriculture Education 1 123 40
MAU3780 Agriculture Education 3 170 45
LRU3721 Religious and Moral Education 3 124 50
MMU3611 Mathematics Education 1A 133 25
MMU3780 Mathematics Education 2 125 45
MSU3610 Integrated Natural Science and Health Education 2 198 100
MSU3780 Integrated Natural Science and Health Education 3 142 150
LSU3611 Social Studies Education 2A 115 45
LSU3790 Social Studies Education 3 92 45
LSD3890 Social Studies Education 4 137 65
MDU3681 Design and Technology Education 1 127 20
MHU3681 Home Ecology Education 1 71 55
MHU3780 Home Ecology Education 3 198 100
MPP3620 Physical and Health Education 1 212 350
LEU3611 ENGLISH LANGUAGE EDUCATION 2 113 56
LSP3700 Silozi Language Education 3 215 50
LRU3611 Rukwangali Language Education 2A 102 25
LRU3780 Rukwangali Language Education 3 132 25
LRU3880 Rukwangali Language Education 4 241 25
LAD3880 Afrikaans Language Education 4 BOOK A 359 65
PSD3880 Inclusive Education 2 66 25
LWU3611 Oshikwanyama Language Education 2 A 200 35
LWD3880 Oshikwanyama Language Education 4 137 45
LZD3880 Silozi Language Education 4 194 45
DIPLO MA IN LABO UR AND EMPLO YMENT STUDIES
SHT2411 The History & Role of Trade Unions 134 50
MBB2531 Basic Business Management 150 50
CLM2511 Labour Market Theories and Policies 90 85
PAR2511 Arbitration 106 40
MHC2511 Human Capital Development 223 25
First Semester, Year Courses and Core Modules -2020
21
21
ANNEXURE 7.
CO DE MO DULE
No. of
Pages No. of Prints
CERTIFICATE IN HIV/AIDS EDUCATIO N AND CO UNSELLING
CEH1411 The Significance of HIV and Aids 143 134
CEH1431 The Continuum of Care 113 125
CEH1480 Introduction to the Practice of Counselling 95 55
DIPLO MA IN HIV/AIDS MANAGEMENT AND CO UNSELLING
CEH2411 HIV/AIDS in the Namibian Context 114 55
CEH2500 Research,monitor and evauluation of Health Programmes 308 150
CEH2431 HIV/AIDS Counselling 137 145
CEH2511 HIV/AIDS Stigma and Discrimation 140 165
MHE2531 Resource Management 211 145
CEH2531 Project Management 162 150
CEH2551 Management and leadership Issues 112 150
CO RE
LEG2410 English for General Communication 312 100
LEA3519 English for Academic Purposes 172 85
EET3589/EET4589 English for Teachers 1 292 50
FMS4621 Educational Foundations 1 96 300
First Semester, Year Courses and Core Modules -2020
top related