rocktex sandstone & ledgestone
Post on 14-Feb-2017
221 Views
Preview:
TRANSCRIPT
DESCRIPTION
RockTex®
Sandstone is a new technology
product, providing the unlimited and freedom of design where the fascinating colors and textural of natural sandstone is desired.
RockTex®
Sandstone is natural sandstone
re-formed, it is cast and finished in a process that replicates the texture and pattern of natural stone with fine detail. It looks and feels like the real sandstone.
PRODUCT TYPES
Cement Base Solid Types:1. SB Sandstone- Cement base lightweight sandstone veneer.2. PS Sculpture Stone- Cement base lightweight sculpture stone veneer.3. RS Ledgestone- Cement base lightweightledgestone veneer.
Cement Base Flexible Types:4. FC Flexible Sandstone- Cement base flexible sandstone veneer.5. PF Sculpture Stone- Cement base flexible sculpture stone veneer.
Resin Base Flexible Types:6. FX Flexible Sandstone- Resin base flexible sandstone veneer.7. PL Sculpture Stone- Resin base flexible sculpture stone veneer.8. RS(FX) Ledgestone- Resin base flexible ledgestone stone veneer.
PRODUCT PRESENTATION
SB, PS, and RS StoneSB, PS and RS stone are made from Portland cement, fine sand, stone or granite chips, lightweight aggregates, mineral oxide color pigments and concrete chemical additives. The special lightweight and the minimum of thickness advance for quick and easy installation of the products.
FX, FC, PL and PF Flexible StoneFX, FC, PL and PF Flexible tone are based on the specially flexible synthetic resin, blended with selected stone chips and granite chips, mineral oxide color pigments and the various chemical additives, cast and cure in mold to simulate a variety of natural sandstone forms. The special flexible characteristic provides for unlimited and freedom of design to any surfaces where stone texture is desired.
Solid Type SandstoneCode: SB, SL
RockTex® Sandstone & Ledgestone
PRODUCT DATA
PAO LIN CO., LTD.10 M13 Saladaeng,
Bangnamprieo, Chachoengsao24000 ThaiLand
Tel: (+66) 38-502270 ~ 1Fax: (+66) 38-502272
www.rocktex.com
Flexible Type SandstoneCode: FX, FC
Sculpture StoneCode: PL, PS, PF
RockTex LedgestoneCode: RS1
RockTex® Sandstone & Ledgestone
PRODUCT DATA
CHARACTERISTICS
Light in weight for all productsSB, PL Sandstone : ca. 12 Kg/s.q.MFX Flexible Sandstone : ca. 5 Kg/ s.q.MThe weight just only 5% to 20% of the natural sandstone.Economic advantages : less cost thannatural stone, lighter loading on foundations,quicker to construct.Durable : colorfast and maintenance free.Excellent flexible : easy to install on anycurve surfaces.Excellent impact resistance.Excellent water repellent and water resistance.Fire safety : noncombustible.Versatile : can be custom-made to meet designers’ criteria for color, texture or size.
RECOMMENDED USES
RockTex®
Stone is used for interior and
exterior nonstructural veneer and trim on masonry, metal or frame construction where decorative art and aesthetic appearances of stone are required. The individual piece of stone are using premixed mortar (exterior) or adhesive (interior) applied on concrete, masonry and brick walls, wood and gypsum board or steel stud walls and metal buildings.
SB, SL, FC , PS, PF and RS Stonecan be used for both interior and exterior applications. It is easily installed directly to the surface of any clean, untreated brick, concrete, or other masonry. Each piece of stone is applied individually with premixed mortar and attaches to the wall surface. On other surfaces, such as wood, wallboard or metal etc., metal lath may be applied first. On some interior projects, the use of masonry adhesive (Ad-05 bonding agent) offers a fast and easy alternative to mortar.
FX and PL Flexible Sandstone are mainly used for interior applications. It can be installed on any structurally sound wall surface, by using Ad-05 bonding agent.
STANDARD SIZES
Dimensionscm x cm
No. of Pieces
per M 2
25 x 50 30 x 60 40 x 80 50 x 100
Weight per Piece - Kg
8 5.56 3.125 2
Thicknessmm
SB, FC, PSSandstone
1.40~1.56 1.98~2.25 3.50~4.00 5.50~6.25 5 ~ 10
FX, PLSandstone
0.50~0.75 0.72~1.08 1.28~1.92 2.00~3.00 3 ~ 7
RS1Ledgestone
5 ~ 15
Note: Special size is available for special order. update: JUNE 2010
15 x 60
11.11
-
-
1.0 ~ 1.2 - - - -
PAO LIN CO., LTD.10 M13 Saladaeng,
Bangnamprieo, Chachoengsao24000 ThaiLand
Tel: (+66) 38-502270 ~ 1Fax: (+66) 38-502272
www.rocktex.com
RockTex® Sandstone & Ledgestone
INSTALLATION PROCESS
RockTex Sandstone veneer used for interior applications can be applied directly to
any clean, untreated:
- Masonry substrate
- Cement based substrate
- Plaster based substrate
- Brickwork substrate
- Gypsum board and wood frame substrate
- Fiber glass, hard plastic and glass substrate
with premixed cement mortar or RockTex Bonding Agent Ad-05.
BEFORE INSTALL ROCKTEX SANDSTONE
A. To Masonry:
RockTex Sandstone veneer can be applied directly to any clean, untreated masonry
surfaces. Painted or sealed masonry must be cleaned by paint remove solvent, surface
grinded, sand blasting, or covered with metal lath before stone veneer can be installed.
B. To Wood Frame Construction:
Any existing wall surface of wood or wood-type products that provides a firm base for
stone veneer can be applied directly with RockTex Bonding Agent Ad-05 on interior
applications. For exterior applications use the diamond wire mesh backed with a
weather-resistant barrier before stone veneer can be installed.
C. To Metal Studs:
RockTex Sandstone veneer can be applied to metal studs. Diamond type metal lath
backed with a weather resistant barrier is then secured to the studs with self- tapping
metal screws. Stone veneer then can be installed using scratch coat method as below.
D. Apply Scratch Coat:
Using Premixed Type N mortar or mixing mortar from the table, add water and blend to
a creamy, paste-like mixture. Using trowel apply a thin layer of this mortar to completely
cover the lath. After drying (24 to 48 Hours) this will provide a rigid backing and assure
firm bonding of the stone veneer.
Mixing Morta Parts by VolumePortland Cement 1Aggregate 2 ~ 3
APPLYING ROCKTEX SANDSTONE:
Using trowel apply mortar 1 cm to 2 cm thick to prepared surface area. Apply mortar
and stone working from the bottom up, if an outside corner is involved in the job, the
corner side should be installed first, then work away from the corner.
RockTex Sandstone generally install with tight-fitted (mortarless) joints, the stones
should be placed butting each other and aligned for level and plumb. To set the stones,
apply the mortar 1 cm thick to its back. Press the stone firmly against the wall and
wiggle it from side to side to ensure a good bond. Check for level and plumb. Using a
trowel, strike off the excess mortar around the edges of the stone prior to placing the
next piece. This will allow the next adjacent piece to fit tightly. Using a clean, wet
sponge wipe any excess mortar from face of the stone.
PAO LIN CO., LTD.10 M13 Saladaeng,
Bangnamprieo, Chachoengsao24000 ThaiLand
Tel: (+66) 38-502270 ~ 1Fax: (+66) 38-502272
www.rocktex.com
RockTex® Sandstone & Ledgestone
INSTALLATION PROCESS
3. Press veneer firmly to the substrate. The corner side should be installed first.
2. Apply bonding agent or mortar on the veneer.
1. Check up level and plumb. 4. The veneer can be fixed with carpenter nailer
5. Fill joint with Joint Filler.
6. Finish.
PAO LIN CO., LTD.10 M13 Saladaeng,
Bangnamprieo, Chachoengsao24000 ThaiLand
Tel: (+66) 38-502270 ~ 1Fax: (+66) 38-502272
www.rocktex.com
RockTex® Sandstone & Ledgestone
FX TYPE INSTALLATION
SUBSTRATE
JOINT FILLER
BONDING AGENT Ad-05
ROCKTEX STONE VENEER(FX TYPE – RESIN BASE)
PLAN VIEW
NOTE: THE SUBSTRATE MUST BE CLEAN AND FREE FROM DIRT AND OTHER FOREIGN MATERIAL BEFORE INSTALLATION OF STONE
THICKNESS 3 – 7 mm
TOP COATING WITHSEALER 3000
PAO LIN CO., LTD.10 M13 Saladaeng,
Bangnamprieo, Chachoengsao24000 ThaiLand
Tel: (+66) 38-502270 ~ 1Fax: (+66) 38-502272
www.rocktex.com
MasonryConcrete
BrickworkGypsumPlywood
Fiber GlassMetal
Hard PlasticGlass
RockTex® Sandstone & Ledgestone
SB TYPE INSTALLATION
SUBSTRATE
JOINT FILLER
BONDING AGENT Ad-05
ROCKTEX STONE VENEER(SB TYPE – CEMENT BASE)
PLAN VIEW
NOTE: THE SUBSTRATE MUST BE CLEAN AND FREE FROM DIRT AND OTHER FOREIGN MATERIAL BEFORE INSTALLATION OF STONE
THICKNESS 5 – 10 mm
TOP COATING WITHSEALER 3000
PAO LIN CO., LTD.10 M13 Saladaeng,
Bangnamprieo, Chachoengsao24000 ThaiLand
Tel: (+66) 38-502270 ~ 1Fax: (+66) 38-502272
www.rocktex.com
MasonryConcrete
BrickworkGypsumPlywood
Fiber GlassMetal
Hard PlasticGlass
RockTex® Sandstone & Ledgestone
SB TYPE INSTALLATION WITH NAIL FIXING
CONCRETE WALL
JOINT FILLER
CONCRETE GALVANIZE NAIL(Ø 1.8mm, Length 25mm)
BONDING AGENT Ad-05
ROCKTEX STONE VENEER(SB TYPE – CEMENT BASE)
PLAN VIEW
FILLER
TOP COATING WITHSEALER 3000
THICKNESS 5 – 10 mm
PAO LIN CO., LTD.10 M13 Saladaeng,
Bangnamprieo, Chachoengsao24000 ThaiLand
Tel: (+66) 38-502270 ~ 1Fax: (+66) 38-502272
www.rocktex.com
3 mm
25 m
m
Ø 1.8mm
CONCRETE GALVANIZE NAIL
RockTex® Sandstone & Ledgestone
UNIT WEIGHT
RockTex Unit WeightKg / sq.M
70 Kg/sq.M
Natural Stone
PAO LIN CO., LTD.10 M13 Saladaeng,
Bangnamprieo, Chachoengsao24000 ThaiLand
Tel: (+66) 38-502270 ~ 1Fax: (+66) 38-502272
www.rocktex.com
11 - 14 Kg/sq.M
RockTexSandstone
Sculpture StoneLedgestone
SB, PS, RS1 type
4 - 7 Kg/sq.M
RockTex Sandstone
Sculpture StoneFX, PL type
RockTexCement Base Solid Type
RockTexResin Base
Flexible Type
PAO LIN CO., LTD.10 M13 Saladaeng, Bangnamprieo, Chachoengsao 24000 ThaiLand
Tel: (+66) 38-502270 ~ 1Fax: (+66) 38-502272
www.rocktex.com
1. Surface preparation and priming.
2. Apply bonding agent.
3. Stick RockTex Sandstone FX type to the surface.
4. Press for tightly bonding..
5. Finish.
FX TYPE INSTALLATION
RockTex® Sandstone & Ledgestone
Bonding Agent Ad-05
DESCRIPTION
RockTex Sandstone Bonding Agent Ad-05 is a water base high performance and
highly flexible paste adhesive, based on acrylic emulsion blend with mineral filler and
specific additives. designed for fixing RockTex Sandstone to any structurally sound
wall surface.
APPLICATION RANGE
RockTex Sandstone Bonding Agent Ad-05 can be used to install on various
substrate such as:
- Masonry substrate
- Cement based substrate
- Plaster based substrate
- Brickwork substrate
- Gypsum board and plywood substrate
- Fiber glass, hard plastic and glass substrate
INSTRUCTION
- The surface must be clean, sound, and free of dust, grease, oil and crumbly material.
for Masonry wall, a primer should be applied before stone veneer can be installed.
- Apply Ad-05 to the prepared surface using a trowel and then level out using a
notched trowel appropriate to the size of the RockTex Sandstone.
- Firmly press the RockTex Sandstone into the adhesive to ensure good adhesion.
- When the installation surface area is narrow, it is also suitable for apply Ad-05 on to
the back side of the RockTex Sandstone.
- Remove any excess of Ad-05 from RockTex Sandstone surface using a sponge.
TECHNICAL DATA
- Appearance: Off-White, Viscous Paste
- Maximum weight of stone for vertical application: 20 Kg/s.q.M
- Adhesion at dry stage: > 0.2 Mpa
- Adhesion in immersion: > 0.12 Mpa
- Density: 1.2
RockTex® Sandstone & Ledgestone
Joint Filler
DESCRIPTION
RockTex Sandstone Joint Filler is a composition of white cement, synthetic resin, selected
sand, additives and mineral pigments, designed for colored grout RockTex Sandstone joints on
interior and exterior wall.
APPLICATION RANGE
RockTex Sandstone Joint Filler can be used to
- Colored grout for joints up to 6mm wide on interior and exterior walls.
- Repair the Rocktex Sandstone surface.
INSTRUCTION
- Mix the Joint Filler with 5% water.
- Start by protecting RockTex Sandstone with marking tape before the spreading of the grout.
- Completely fill the joints using a rubber grouting trowel or an appropriate tool.
- Wait that Joint Filler has started to set (45 to 60 min.).
- Remove excess grout using a sponge.
TECHNICAL DATA
- Density 2.1
- Tensile strength about 3.1 Mpa
PAO LIN CO., LTD.10 M13 Saladaeng,
Bangnamprieo, Chachoengsao24000 ThaiLand
Tel: (+66) 38-502270 ~ 1Fax: (+66) 38-502272
www.rocktex.com
RockTex® Sandstone & Ledgestone
Sealer 3000
DESCRIPTION
Sealer 3000 is an aqueous silane-based system intended to render porous mineral substrates
hydro-and oleophobic, making them easy to clean. It is practically free from volatile organic
components (VOC). Facades treated with Sealer 3000 remain clean longer, show no unsightly
dark water streaks and are less susceptible to the growth of microorganisms such as mold and
algae. Stains caused by common liquids Coffee, cola and oils, dark liquids that are easily
absorbed by untreated surfaces leaving permanent stains, are easily removed from surfaces
treated with Sealer 3000. Even chewing gum and posters don’t stick quite so well, facilitating
their removal.
APPLICATION RANGE
Sealer 3000 can be used to create and easy-clean surface on many porous, mineral-based
building materials. Some examples include:
• Sand limestone masonry
• Sandstone masonry
• Brick masonry
• concrete
• mineral-based stucco
• polished surfaces such as marble and granite
The concentration of Sealer 3000 and the application method both depend on the porosity and
absorbency of the building material to be treated.
PRODUCT CHARACTERISTICS
Sealer 3000
• is a colorless, water-vapor permeable, hydro- and oleophobic treatment
• does not form a sticky silicone film
• beads water and oils on absorbent mineral building materials
• keeps facades clean longer and makes cleaning easier
• slows down the growth of microorganisms
• prevents unsightly water streaks caused by rain
One section of the sand limestone wall shown below was treated with Sealer 3000. The other
section was left untreated. After five years of outdoor weathering, the difference is clear (neither
section was cleaned before the photographs were made):
untreated treated with Sealer 3000
PAO LIN CO., LTD.10 M13 Saladaeng,
Bangnamprieo, Chachoengsao24000 ThaiLand
Tel: (+66) 38-502270 ~ 1Fax: (+66) 38-502272
www.rocktex.com
RockTex® Sandstone & Ledgestone
Sealer 3000
TECHNICAL DATA
Property Value Unit Method
Density (20 °C) approx. 1,06 g/cm3 DIN 51757Appearance yellowish, slightly cloudy liquidViscosity (20 °C) approx. 1,6 mPa.s DIN 53015pH (20 °C, 1:1 in H2O) 4Flash point > 61 °C EN 22719
APPLICATION INFORMATION The facade to be treated must be clean surface-dry. Dirt, grime, efflorescence, algae and moss must be removed. Water absorbed during cleaning must be allowed to dry so that the surface is dry before application begins. Imperfections such as cracks, cracked joints or defective seams must be repaired using appropriate methods. Mortar used for repairs must be fully cured and surface dry. Do not apply the product in rain or strong winds.
Due to the water content, the treatment solution is susceptible to freezing and must not be used at temperatures under 0°C.
The recommended application method is with HVLP (High Volume Low Pressure) equipment. Product application using airless sprayers (low pressure, so-called “flooding” method) is also possible if the substrate is sufficiently absorbent. The ready-to-use solution (a dilution of 1 part Sealer 3000 Concentrate to 2 to 14 parts water) is best applied starting from the bottom and going up the wall. This avoids pretreating the substrate with runoff from above. Avoid using dirty application equipment, which can contaminate the product.
The easy-to-clean effect may be in many cases (especially on very coarse and very porous substrates) be enhanced by additional treatments. The amount of product required for the second and all subsequent treatments is considerably less. Additional treatments should be done using HVLP technology; the resulting droplets must be rubbed in quickly using a brush or swab to distribute the liquid evenly across the surface.
In most cases the hydro- and oleophobic effect forms within just a few minutes (especially in warm, dry weather). Some substrates, such as limestone, are less reactive. In such cases the efficacy may take some days to develop fully. The application should be continuous and uninterrupted so that no overlapping occurs. The aqueous solution of Sealer 3000 Concentrate cannot penetrate a previously treated section. The resulting droplets can cause mottling if not rubbed in with a brush.
Less absorbent substrates should not be treated with highly dilute solutions of Sealer 3000Concentrate. We recommend treating smooth stone surfaces by polishing with undiluted Sealer 3000 Concentrate.
Adjoining areas such as windows, glass, painted surfaces, surfaces to be painted, plants and landscaping should be protected with plastic from overspray. In case of accidental contamination the resulting film can be removed with standard cleaners, silicone removers, mineral spirits or solvents if applied immediately before it hardens.
Sealer 3000 Concentrate reacts with the interface of the mineral substrate’s pores and capillaries to form invisible, hydrophobic interface-compounds. Since previous building material treatments may not be known, a Sealer 3000 test patch is recommended to avoid any undesired side effects.
STORAGEUnopened containers of Sealer 3000 Concentrate have a shelf life of at least 12 months. The product should be stored at temperatures between 0 °C and 40 °C.
PAO LIN CO., LTD.10 M13 Saladaeng,
Bangnamprieo, Chachoengsao24000 ThaiLand
Tel: (+66) 38-502270 ~ 1Fax: (+66) 38-502272
www.rocktex.com
top related