rohs lookup 212 - pennengineering · pennengineering(–rohs(compliance(chart(–212 page%3%of%49...
Post on 25-Mar-2020
8 Views
Preview:
TRANSCRIPT
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 1 of 49
Type Plating Plating Description Compliant StatusStandard Finish
A4 None No finish suffixCompliant with no exemptions required Yes
AC None No finish suffixCompliant with no exemptions required Yes
AEA:ALUM-‐MAXTITE ANODIZED Anodized per AMS-‐A-‐8625
Compliant with no exemptions required Yes
AECH:4037-‐MAXTITE CS
Cadmium and Clear Chromate
Not compliant because finish contains hexavalent chromium Yes
AECH:4037-‐MAXTITE CSI
Cadmium and Yellow Chromate
Not compliant because finish contains hexavalent chromium No
AECH:4037-‐MAXTITE ZN Zinc Nickel
Not compliant because finish contains hexavalent chromium No
AECH:4037-‐MAXTITE ZNR
RoHS Zinc and Clear Chromate
Compliant with no exemptions required No
AECH:4037-‐MAXTITE ZY Zinc and Yellow Chromate
Not compliant because finish contains hexavalent chromium No
AECH:4037-‐MAXTITE ZYR
RoHS Zinc and Yellow Chromate
Compliant with no exemptions required No
AECK ZI Zinc and clear chromateCompliant with no exemptions required Yes
AECK ZN Zinc NickelCompliant with no exemptions required No
AECR ZI Zinc and clear chromateCompliant with no exemptions required Yes
AECR ZN Zinc NickelCompliant with no exemptions required No
AEFH ZI Zinc and clear chromateCompliant with no exemptions required Yes
AEFH ZN Zinc NickelCompliant with no exemptions required No
AEFHH ZI Zinc and clear chromateCompliant with no exemptions required Yes
AEFHH ZN Zinc NickelCompliant with no exemptions required No
AEFK ZI Zinc and clear chromateCompliant with no exemptions required Yes
AEFK ZN Zinc NickelCompliant with no exemptions required No
AEFR ZI Zinc and clear chromateCompliant with no exemptions required Yes
AEFR ZN Zinc NickelCompliant with no exemptions required No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 2 of 49
Type Plating Plating Description Compliant StatusStandard Finish
AEHA 1 Clear protective coatingCompliant with no exemptions required Yes
AEHS 10 RoHS Zinc/ClearCompliant with no exemptions required No
AEHS 2Cadmium and Clear Chromate
Not compliant because finish contains hexavalent chromium No
AEHS 3 Zinc and Clear Chromate
Not compliant because finish contains hexavalent chromium No
AEHS 4 Zinc and Yellow Chromate
Please contact the factory at RoHS@pemnet.com for further information. No
AEHS 5 Zinc and Black Chromate
Not compliant because finish contains hexavalent chromium No
AEHS 6 Tin Plate
Not compliant because finish contains hexavalent chromium No
AEHS 7Cadmium and Yellow Chromate
Not compliant because finish contains hexavalent chromium No
AEHS 8 RoHS Zinc/YellowCompliant with no exemptions required Yes
AEHS 9Tin/Zinc and Yellow Chromate
Not compliant because finish contains hexavalent chromium No
AEKA 1 Clear protective coatingCompliant with no exemptions required Yes
AEKS 10 RoHS Zinc/ClearCompliant with no exemptions required No
AEKS 2Cadmium and Clear Chromate
Not compliant because finish contains hexavalent chromium No
AEKS 3 Zinc and Clear Chromate
Not compliant because finish contains hexavalent chromium No
AEKS 4 Zinc and Yellow Chromate
Please contact the factory at RoHS@pemnet.com for further information. No
AEKS 5 Zinc and Black Chromate
Not compliant because finish contains hexavalent chromium No
AEKS 6 Tin Plate
Not compliant because finish contains hexavalent chromium No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 3 of 49
Type Plating Plating Description Compliant StatusStandard Finish
AEKS 7Cadmium and Yellow Chromate
Not compliant because finish contains hexavalent chromium No
AEKS 8 RoHS Zinc/YellowCompliant with no exemptions required Yes
AEKS 9Tin/Zinc and Yellow Chromate
Not compliant because finish contains hexavalent chromium No
AELA 1 Clear protective coatingCompliant with no exemptions required Yes
AELS 10 RoHS Zinc/ClearCompliant with no exemptions required No
AELS 2Cadmium and Clear Chromate
Not compliant because finish contains hexavalent chromium No
AELS 3 Zinc and Clear Chromate
Not compliant because finish contains hexavalent chromium No
AELS 4 Zinc and Yellow Chromate
Please contact the factory at RoHS@pemnet.com for further information. No
AELS 5 Zinc and Black Chromate
Not compliant because finish contains hexavalent chromium No
AELS 6 Tin Plate
Not compliant because finish contains hexavalent chromium No
AELS 7Cadmium and Yellow Chromate
Not compliant because finish contains hexavalent chromium No
AELS 8 RoHS Zinc/YellowCompliant with no exemptions required Yes
AELS 9Tin/Zinc and Yellow Chromate
Not compliant because finish contains hexavalent chromium No
AENM:316-‐SS-‐MAXTITE PASSIVATE
Passivation per AMS-‐2700 (QQ-‐P-‐35) Type II
Compliant with no exemptions required Yes
AEOS 10 RoHS Zinc/ClearCompliant with no exemptions required Yes
AEOS 2Cadmium and Clear Chromate
Not compliant because finish contains hexavalent chromium No
AEOS 3 Zinc and Clear Chromate
Not compliant because finish contains hexavalent chromium No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 4 of 49
Type Plating Plating Description Compliant StatusStandard Finish
AEOS 4 Zinc and Yellow Chromate
Please contact the factory at RoHS@pemnet.com for further information. No
AEOS 5 Zinc and Black Chromate
Not compliant because finish contains hexavalent chromium No
AEOS 6 Tin Plate
Not compliant because finish contains hexavalent chromium No
AEOS 7Cadmium and Yellow Chromate
Not compliant because finish contains hexavalent chromium No
AEOS 8 RoHS Zinc/YellowCompliant with no exemptions required No
AEOS 9Tin/Zinc and Yellow Chromate
Not compliant because finish contains hexavalent chromium No
AES:PLUSTITE 10 RoHS Zinc/ClearCompliant with no exemptions required No
AES:PLUSTITE 2Cadmium and Clear Chromate
Not compliant because finish contains hexavalent chromium No
AES:PLUSTITE 3 Zinc and Clear Chromate
Not compliant because finish contains hexavalent chromium No
AES:PLUSTITE 4 Zinc and Yellow Chromate
Please contact the factory at RoHS@pemnet.com for further information. No
AES:PLUSTITE 5 Zinc and Black Chromate
Not compliant because finish contains hexavalent chromium No
AES:PLUSTITE 6 Tin Plate
Not compliant because finish contains hexavalent chromium No
AES:PLUSTITE 7Cadmium and Yellow Chromate
Not compliant because finish contains hexavalent chromium No
AES:PLUSTITE 8 RoHS Zinc/YellowCompliant with no exemptions required No
AES:PLUSTITE 9Tin/Zinc and Yellow Chromate
Not compliant because finish contains hexavalent chromium No
AES:PLUSTITE ZYRRoHS Zinc and Yellow Chromate
Compliant with no exemptions required Yes
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 5 of 49
Type Plating Plating Description Compliant StatusStandard Finish
AES:STEEL-‐MAXTITE CS
Cadmium and Clear Chromate
Not compliant because finish contains hexavalent chromium Yes
AES:STEEL-‐MAXTITE CSI
Cadmium and Yellow Chromate
Not compliant because finish contains hexavalent chromium No
AES:STEEL-‐MAXTITE ZN Zinc Nickel
Not compliant because finish contains hexavalent chromium No
AES:STEEL-‐MAXTITE ZNR
RoHS Zinc and Clear Chromate
Compliant with no exemptions required No
AES:STEEL-‐MAXTITE ZY Zinc and Yellow Chromate
Not compliant because finish contains hexavalent chromium No
AES:STEEL-‐MAXTITE ZYR
RoHS Zinc and Yellow Chromate
Compliant with no exemptions required No
AES:STEEL-‐MAXTITE-‐FULL-‐HEX CS
Cadmium and Clear Chromate
Not compliant because finish contains hexavalent chromium Yes
AES:STEEL-‐MAXTITE-‐FULL-‐HEX CSI
Cadmium and Yellow Chromate
Not compliant because finish contains hexavalent chromium No
AES:STEEL-‐MAXTITE-‐FULL-‐HEX ZN Zinc Nickel
Not compliant because finish contains hexavalent chromium No
AES:STEEL-‐MAXTITE-‐FULL-‐HEX ZNR
RoHS Zinc and Clear Chromate
Compliant with no exemptions required No
AES:STEEL-‐MAXTITE-‐FULL-‐HEX ZY Zinc and Yellow Chromate
Not compliant because finish contains hexavalent chromium No
AES:STEEL-‐MAXTITE-‐FULL-‐HEX ZYR
RoHS Zinc and Yellow Chromate
Compliant with no exemptions required No
AES:STUD-‐SERIES 10 RoHS Zinc/ClearCompliant with no exemptions required No
AES:STUD-‐SERIES 2Cadmium and Clear Chromate
Not compliant because finish contains hexavalent chromium No
AES:STUD-‐SERIES 3 Zinc and Clear Chromate
Not compliant because finish contains hexavalent chromium No
AES:STUD-‐SERIES 4 Zinc and Yellow Chromate
Please contact the factory at RoHS@pemnet.com for further information. No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 6 of 49
Type Plating Plating Description Compliant StatusStandard Finish
AES:STUD-‐SERIES 5 Zinc and Black Chromate
Not compliant because finish contains hexavalent chromium No
AES:STUD-‐SERIES 6 Tin Plate
Not compliant because finish contains hexavalent chromium No
AES:STUD-‐SERIES 7Cadmium and Yellow Chromate
Not compliant because finish contains hexavalent chromium No
AES:STUD-‐SERIES 9Tin/Zinc and Yellow Chromate
Not compliant because finish contains hexavalent chromium No
AES:STUD-‐SERIESno designation RoHS Zinc/Yellow
Compliant with no exemptions required Yes
AESS:430-‐SS-‐MAXTITE PASSIVATE
Passivation per AMS-‐2700 (QQ-‐P-‐35) Type II
Compliant with no exemptions required Yes
AETA 2Cadmium and Clear Chromate
Not compliant because finish contains hexavalent chromium Yes
AETC 2Cadmium and Clear Chromate
Not compliant because finish contains hexavalent chromium Yes
AETH ZI Zinc and clear chromateCompliant with no exemptions required Yes
AETH ZN Zinc NickelCompliant with no exemptions required No
AETHC None No finish suffixCompliant with no exemptions required Yes
AETHH ZI Zinc and clear chromateCompliant with no exemptions required Yes
AETHH ZN Zinc NickelCompliant with no exemptions required No
AETK ZI Zinc and clear chromateCompliant with no exemptions required Yes
AETK ZN Zinc NickelCompliant with no exemptions required No
AETR ZI Zinc and clear chromateCompliant with no exemptions required Yes
AETR ZN Zinc NickelCompliant with no exemptions required No
AETS 2Cadmium and Clear Chromate
Not compliant because finish contains hexavalent chromium Yes
AS BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 7 of 49
Type Plating Plating Description Compliant StatusStandard Finish
AS BO Black OxideCompliant using exemption for up to 0.35% lead in steel No
AS BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No
AS CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
AS CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
AS CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No
AS CU Copper flashCompliant using exemption for up to 0.35% lead in steel No
AS DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
AS ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
AS ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No
AS X No FinishCompliant using exemption for up to 0.35% lead in steel No
AS X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No
AS ZB Zinc and black chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after September 15, 2006 No
AS ZC Zinc and yellow chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after March 1, 2006. No
AS ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes
AS ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 0.35% lead in steel No
B BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
B BO Black OxideCompliant using exemption for up to 0.35% lead in steel No
B BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No
B CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 8 of 49
Type Plating Plating Description Compliant StatusStandard Finish
B CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
B CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No
B CU Copper flashCompliant using exemption for up to 0.35% lead in steel No
B DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
B ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
B ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No
B X No FinishCompliant using exemption for up to 0.35% lead in steel No
B X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No
B ZB Zinc and black chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after September 15, 2006 No
B ZC Zinc and yellow chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after March 1, 2006. No
B ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes
B ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 0.35% lead in steel No
BS None No finish suffixCompliant with no exemptions required Yes
BSO BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
BSO BO Black OxideCompliant using exemption for up to 0.35% lead in steel No
BSO BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No
BSO CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
BSO CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
BSO CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 9 of 49
Type Plating Plating Description Compliant StatusStandard Finish
BSO CU Copper flashCompliant using exemption for up to 0.35% lead in steel No
BSO DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
BSO ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
BSO ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No
BSO X No FinishCompliant using exemption for up to 0.35% lead in steel No
BSO X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No
BSO ZB Zinc and black chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after September 15, 2006 No
BSO ZC Zinc and yellow chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after March 1, 2006. No
BSO ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes
BSO ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 0.35% lead in steel No
BSO4 None No finish suffixCompliant with no exemptions required Yes
BSOA None No finish suffixCompliant with no exemptions required Yes
BSON BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
BSON BO Black OxideCompliant using exemption for up to 0.35% lead in steel No
BSON BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No
BSON CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
BSON CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
BSON CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No
BSON CU Copper flashCompliant using exemption for up to 0.35% lead in steel No
BSON DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 10 of 49
Type Plating Plating Description Compliant StatusStandard Finish
BSON ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
BSON ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No
BSON X No FinishCompliant using exemption for up to 0.35% lead in steel No
BSON X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No
BSON ZB Zinc and black chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after September 15, 2006 No
BSON ZC Zinc and yellow chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after March 1, 2006. No
BSON ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes
BSON ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 0.35% lead in steel No
BSOS None No finish suffixCompliant with no exemptions required Yes
CFHA None No finish suffixCompliant with no exemptions required Yes
CFHC None No finish suffixCompliant with no exemptions required Yes
CFN BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
CFN BO Black OxideCompliant using exemption for up to 0.35% lead in steel No
CFN BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No
CFN CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
CFN CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
CFN CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No
CFN CU Copper flashCompliant using exemption for up to 0.35% lead in steel No
CFN DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
CFN ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 11 of 49
Type Plating Plating Description Compliant StatusStandard Finish
CFN ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No
CFN X No FinishCompliant using exemption for up to 0.35% lead in steel No
CFN X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No
CFN ZB Zinc and black chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after September 15, 2006 No
CFN ZC Zinc and yellow chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after March 1, 2006. No
CFN ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes
CFN ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 0.35% lead in steel No
CHA None No finish suffixCompliant with no exemptions required Yes
CHC None No finish suffixCompliant with no exemptions required Yes
CLA None No finish suffixCompliant with no exemptions required Yes
CLC BN Black NitrideCompliant with no exemptions required No
CLC BO Black OxideCompliant with no exemptions required No
CLC None No finish suffixCompliant with no exemptions required Yes
CLS None No finish suffixCompliant with no exemptions required Yes
CLSS BN Black NitrideCompliant with no exemptions required No
CLSS BO Black OxideCompliant with no exemptions required No
CLSS None No finish suffixCompliant with no exemptions required Yes
CSOS None No finish suffixCompliant with no exemptions required Yes
CSS BN Black NitrideCompliant with no exemptions required No
CSS BO Black OxideCompliant with no exemptions required No
CSS None No finish suffixCompliant with no exemptions required Yes
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 12 of 49
Type Plating Plating Description Compliant StatusStandard Finish
DSO BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
DSO BO Black OxideCompliant using exemption for up to 0.35% lead in steel No
DSO BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No
DSO CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
DSO CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
DSO CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No
DSO CU Copper flashCompliant using exemption for up to 0.35% lead in steel No
DSO DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
DSO ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
DSO ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No
DSO X No FinishCompliant using exemption for up to 0.35% lead in steel No
DSO X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No
DSO ZB Zinc and black chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after September 15, 2006 No
DSO ZC Zinc and yellow chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after March 1, 2006. No
DSO ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes
DSO ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 0.35% lead in steel No
DSOS None No finish suffixCompliant with no exemptions required Yes
F BN Black NitrideCompliant with no exemptions required No
F BO Black OxideCompliant with no exemptions required No
F None No finish suffixCompliant with no exemptions required Yes
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 13 of 49
Type Plating Plating Description Compliant StatusStandard Finish
F10 BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
F10 BO Black OxideCompliant using exemption for up to 0.35% lead in steel No
F10 BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No
F10 CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
F10 CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
F10 CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No
F10 CU Copper flashCompliant using exemption for up to 0.35% lead in steel No
F10 DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
F10 ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
F10 ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No
F10 X No FinishCompliant using exemption for up to 0.35% lead in steel No
F10 X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No
F10 ZB Zinc and black chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after September 15, 2006 No
F10 ZC Zinc and yellow chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after March 1, 2006. No
F10 ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes
F10 ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 0.35% lead in steel No
FE EFDry film lube over cadmium
Not compliant because the dry film lubricant contains a lead compound No
FE MD Dry film lubeCompliant with no exemptions required Yes
FE SF Dry film lube over silver
Not compliant because the dry film lubricant contains a lead compound No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 14 of 49
Type Plating Plating Description Compliant StatusStandard Finish
FEO EFDry film lube over cadmium
Not compliant because the dry film lubricant contains a lead compound No
FEO MD Dry film lubeCompliant with no exemptions required Yes
FEO SF Dry film lube over silver
Not compliant because the dry film lubricant contains a lead compound No
FEOX BN Black NitrideCompliant with no exemptions required No
FEOX BO Black OxideCompliant with no exemptions required No
FEOX None No finish suffixCompliant with no exemptions required Yes
FEX BN Black NitrideCompliant with no exemptions required No
FEX BO Black OxideCompliant with no exemptions required No
FEX None No finish suffixCompliant with no exemptions required Yes
FH BN Black NitrideCompliant with no exemptions required No
FH BO Black OxideCompliant with no exemptions required No
FH BZ Zinc and blue dyeCompliant with no exemptions required No
FH CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
FH CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
FH CN Bright nickel over copperCompliant with no exemptions required No
FH CU Copper flashCompliant with no exemptions required No
FH DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
FH ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
FH ET ElectrotinCompliant with no exemptions required No
FH X No FinishCompliant with no exemptions required No
FH X17 Zinc and clear dyed yellowCompliant with no exemptions required No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 15 of 49
Type Plating Plating Description Compliant StatusStandard Finish
FH ZB Zinc and black chromate
Compliant with no exemptions required, date coded on or after September 15, 2006 No
FH ZC Zinc and yellow chromate
Compliant with no exemptions required, date coded on or after March 1, 2006 No
FH ZI Zinc and clear chromateCompliant with no exemptions required Yes
FH ZTZinc and clear chromate, 96 hr.
Compliant with no exemptions required No
FH4 None No finish suffixCompliant with no exemptions required Yes
FHA None No finish suffixCompliant with no exemptions required Yes
FHL BN Black NitrideCompliant with no exemptions required No
FHL BO Black OxideCompliant with no exemptions required No
FHL BZ Zinc and blue dyeCompliant with no exemptions required No
FHL CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
FHL CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
FHL CN Bright nickel over copperCompliant with no exemptions required No
FHL CU Copper flashCompliant with no exemptions required No
FHL DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
FHL ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
FHL ET ElectrotinCompliant with no exemptions required No
FHL X No FinishCompliant with no exemptions required No
FHL X17 Zinc and clear dyed yellowCompliant with no exemptions required No
FHL ZB Zinc and black chromate
Compliant with no exemptions required, date coded on or after September 15, 2006 No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 16 of 49
Type Plating Plating Description Compliant StatusStandard Finish
FHL ZC Zinc and yellow chromate
Compliant with no exemptions required, date coded on or after March 1, 2006 No
FHL ZI Zinc and clear chromateCompliant with no exemptions required Yes
FHL ZTZinc and clear chromate, 96 hr.
Compliant with no exemptions required No
FHLS None No finish suffixCompliant with no exemptions required Yes
FHP None No finish suffixCompliant with no exemptions required Yes
FHS None No finish suffixCompliant with no exemptions required Yes
H BN Black NitrideCompliant with no exemptions required No
H BO Black OxideCompliant with no exemptions required No
H BZ Zinc and blue dyeCompliant with no exemptions required No
H CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
H CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
H CN Bright nickel over copperCompliant with no exemptions required No
H CU Copper flashCompliant with no exemptions required No
H DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
H ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
H ET ElectrotinCompliant with no exemptions required No
H X No FinishCompliant with no exemptions required Yes
H X17 Zinc and clear dyed yellowCompliant with no exemptions required No
H ZB Zinc and black chromate
Compliant with no exemptions required, date coded on or after September 15, 2006 No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 17 of 49
Type Plating Plating Description Compliant StatusStandard Finish
H ZC Zinc and yellow chromate
Compliant with no exemptions required, date coded on or after March 1, 2006 No
H ZI Zinc and clear chromateCompliant with no exemptions required Yes
H ZTZinc and clear chromate, 96 hr.
Compliant with no exemptions required No
HF109 BN Black NitrideCompliant with no exemptions required No
HF109 BO Black OxideCompliant with no exemptions required No
HF109 BZ Zinc and blue dyeCompliant with no exemptions required No
HF109 CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
HF109 CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
HF109 CN Bright nickel over copperCompliant with no exemptions required No
HF109 CU Copper flashCompliant with no exemptions required No
HF109 DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
HF109 ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
HF109 ET ElectrotinCompliant with no exemptions required No
HF109 X No FinishCompliant with no exemptions required No
HF109 X17 Zinc and clear dyed yellowCompliant with no exemptions required No
HF109 ZB Zinc and black chromate
Compliant with no exemptions required, date coded on or after September 15, 2006 No
HF109 ZC Zinc and yellow chromate
Compliant with no exemptions required, date coded on or after March 1, 2006 No
HF109 ZI Zinc and clear chromateCompliant with no exemptions required Yes
HF109 ZTZinc and clear chromate, 96 hr.
Compliant with no exemptions required No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 18 of 49
Type Plating Plating Description Compliant StatusStandard Finish
HFE BN Black NitrideCompliant with no exemptions required No
HFE BO Black OxideCompliant with no exemptions required No
HFE BZ Zinc and blue dyeCompliant with no exemptions required No
HFE CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
HFE CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
HFE CN Bright nickel over copperCompliant with no exemptions required No
HFE CU Copper flashCompliant with no exemptions required No
HFE DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
HFE ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
HFE ET ElectrotinCompliant with no exemptions required No
HFE X No FinishCompliant with no exemptions required No
HFE X17 Zinc and clear dyed yellowCompliant with no exemptions required No
HFE ZB Zinc and black chromate
Compliant with no exemptions required, date coded on or after September 15, 2006 No
HFE ZC Zinc and yellow chromate
Compliant with no exemptions required, date coded on or after March 1, 2006 No
HFE ZI Zinc and clear chromateCompliant with no exemptions required Yes
HFE ZTZinc and clear chromate, 96 hr.
Compliant with no exemptions required No
HFG8 BN Black NitrideCompliant with no exemptions required No
HFG8 BO Black OxideCompliant with no exemptions required No
HFG8 BZ Zinc and blue dyeCompliant with no exemptions required No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 19 of 49
Type Plating Plating Description Compliant StatusStandard Finish
HFG8 CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
HFG8 CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
HFG8 CN Bright nickel over copperCompliant with no exemptions required No
HFG8 CU Copper flashCompliant with no exemptions required No
HFG8 DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
HFG8 ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
HFG8 ET ElectrotinCompliant with no exemptions required No
HFG8 X No FinishCompliant with no exemptions required No
HFG8 X17 Zinc and clear dyed yellowCompliant with no exemptions required No
HFG8 ZB Zinc and black chromate
Compliant with no exemptions required, date coded on or after September 15, 2006 No
HFG8 ZC Zinc and yellow chromate
Compliant with no exemptions required, date coded on or after March 1, 2006 No
HFG8 ZI Zinc and clear chromateCompliant with no exemptions required Yes
HFG8 ZTZinc and clear chromate, 96 hr.
Compliant with no exemptions required No
HFH BN Black NitrideCompliant with no exemptions required No
HFH BO Black OxideCompliant with no exemptions required No
HFH BZ Zinc and blue dyeCompliant with no exemptions required No
HFH CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
HFH CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
HFH CN Bright nickel over copperCompliant with no exemptions required No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 20 of 49
Type Plating Plating Description Compliant StatusStandard Finish
HFH CU Copper flashCompliant with no exemptions required No
HFH DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
HFH ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
HFH ET ElectrotinCompliant with no exemptions required No
HFH X No FinishCompliant with no exemptions required No
HFH X17 Zinc and clear dyed yellowCompliant with no exemptions required No
HFH ZB Zinc and black chromate
Compliant with no exemptions required, date coded on or after September 15, 2006 No
HFH ZC Zinc and yellow chromate
Compliant with no exemptions required, date coded on or after March 1, 2006 No
HFH ZI Zinc and clear chromateCompliant with no exemptions required Yes
HFH ZTZinc and clear chromate, 96 hr.
Compliant with no exemptions required No
HFHB BN Black NitrideCompliant with no exemptions required No
HFHB BO Black OxideCompliant with no exemptions required No
HFHB BZ Zinc and blue dyeCompliant with no exemptions required No
HFHB CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
HFHB CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
HFHB CN Bright nickel over copperCompliant with no exemptions required No
HFHB CU Copper flashCompliant with no exemptions required No
HFHB DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
HFHB ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
HFHB ET ElectrotinCompliant with no exemptions required No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 21 of 49
Type Plating Plating Description Compliant StatusStandard Finish
HFHB X No FinishCompliant with no exemptions required Yes
HFHB X17 Zinc and clear dyed yellowCompliant with no exemptions required No
HFHB ZB Zinc and black chromate
Compliant with no exemptions required, date coded on or after September 15, 2006 No
HFHB ZC Zinc and yellow chromate
Compliant with no exemptions required, date coded on or after March 1, 2006 No
HFHB ZI Zinc and clear chromateCompliant with no exemptions required No
HFHB ZTZinc and clear chromate, 96 hr.
Compliant with no exemptions required No
HFHS None No finish suffixCompliant with no exemptions required Yes
HN BN Black NitrideCompliant with no exemptions required No
HN BO Black OxideCompliant with no exemptions required No
HN BZ Zinc and blue dyeCompliant with no exemptions required No
HN CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
HN CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
HN CN Bright nickel over copperCompliant with no exemptions required No
HN CU Copper flashCompliant with no exemptions required No
HN DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
HN ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
HN ET ElectrotinCompliant with no exemptions required No
HN X No FinishCompliant with no exemptions required Yes
HN X17 Zinc and clear dyed yellowCompliant with no exemptions required No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 22 of 49
Type Plating Plating Description Compliant StatusStandard Finish
HN ZB Zinc and black chromate
Compliant with no exemptions required, date coded on or after September 15, 2006 No
HN ZC Zinc and yellow chromate
Compliant with no exemptions required, date coded on or after March 1, 2006. No
HN ZI Zinc and clear chromateCompliant with no exemptions required Yes
HN ZTZinc and clear chromate, 96 hr.
Compliant with no exemptions required No
HNL BN Black NitrideCompliant with no exemptions required No
HNL BO Black OxideCompliant with no exemptions required No
HNL BZ Zinc and blue dyeCompliant with no exemptions required No
HNL CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
HNL CN Bright nickel over copperCompliant with no exemptions required No
HNL CU Copper flashCompliant with no exemptions required No
HNL DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
HNL ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
HNL ET ElectrotinCompliant with no exemptions required No
HNL LZ
Zinc w/ clear trivalent chromate + sealant/lubricant
Compliant with no exemptions required Yes
HNL X No FinishCompliant with no exemptions required No
HNL X17 Zinc and clear dyed yellowCompliant with no exemptions required No
HNL ZB Zinc and black chromate
Compliant with no exemptions required, date coded on or after September 15, 2006 No
HNL ZC Zinc and yellow chromate
Compliant with no exemptions required, date coded on or after March 1, 2006 No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 23 of 49
Type Plating Plating Description Compliant StatusStandard Finish
HNL ZI Zinc and clear chromateCompliant with no exemptions required No
HNL ZTZinc and clear chromate, 96 hr.
Compliant with no exemptions required No
IBB None No finish suffix
Compliant using exemption for up to 4.0% lead in copper alloys Yes
IBC BN Black NitrideCompliant with no exemptions required No
IBC BO Black OxideCompliant with no exemptions required No
IBC None No finish suffixCompliant with no exemptions required Yes
IBLC BN Black NitrideCompliant with no exemptions required No
IBLC BO Black OxideCompliant with no exemptions required No
IBLC None No finish suffixCompliant with no exemptions required Yes
IPIS BN Black NitrideCompliant with no exemptions required No
IPIS BO Black OxideCompliant with no exemptions required No
IPIS None No finish suffixCompliant with no exemptions required Yes
ISB None No finish suffix
Compliant using exemption for up to 4.0% lead in copper alloys Yes
ISC BN Black NitrideCompliant with no exemptions required No
ISC BO Black OxideCompliant with no exemptions required No
ISC None No finish suffixCompliant with no exemptions required Yes
ITB None No finish suffix
Compliant using exemption for up to 4.0% lead in copper alloys Yes
ITC BN Black NitrideCompliant with no exemptions required No
ITC BO Black OxideCompliant with no exemptions required No
ITC None No finish suffixCompliant with no exemptions required Yes
IUB None No finish suffix
Compliant using exemption for up to 4.0% lead in copper alloys Yes
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 24 of 49
Type Plating Plating Description Compliant StatusStandard Finish
IUC BN Black NitrideCompliant with no exemptions required No
IUC BO Black OxideCompliant with no exemptions required No
IUC None No finish suffixCompliant with no exemptions required Yes
IUTB None No finish suffix
Compliant using exemption for up to 4.0% lead in copper alloys Yes
IUTC BN Black NitrideCompliant with no exemptions required No
IUTC BO Black OxideCompliant with no exemptions required No
IUTC None No finish suffixCompliant with no exemptions required Yes
KF2 BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
KF2 BO Black OxideCompliant using exemption for up to 0.35% lead in steel No
KF2 BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No
KF2 CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
KF2 CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
KF2 CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No
KF2 CU Copper flashCompliant using exemption for up to 0.35% lead in steel No
KF2 DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
KF2 ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
KF2 ET ElectrotinCompliant using exemption for up to 0.35% lead in steel Yes
KF2 X No FinishCompliant using exemption for up to 0.35% lead in steel No
KF2 X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No
KF2 ZB Zinc and black chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after September 15, 2006 No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 25 of 49
Type Plating Plating Description Compliant StatusStandard Finish
KF2 ZC Zinc and yellow chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after March 1, 2006. No
KF2 ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel No
KF2 ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 0.35% lead in steel No
KFB3 BN Black Nitride
Compliant using exemption for up to 4.0% lead in copper alloys No
KFB3 BO Black Oxide
Compliant using exemption for up to 4.0% lead in copper alloys No
KFB3 BZ Zinc and blue dye
Compliant using exemption for up to 4.0% lead in copper alloys No
KFB3 CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
KFB3 CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
KFB3 CN Bright nickel over copper
Compliant using exemption for up to 4.0% lead in copper alloys No
KFB3 CU Copper flash
Compliant using exemption for up to 4.0% lead in copper alloys No
KFB3 DT Matte Tin
Compliant using exemption for up to 4.0% lead in copper alloys No
KFB3 ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
KFB3 ET Electrotin
Compliant using exemption for up to 4.0% lead in copper alloys Yes
KFB3 X No Finish
Compliant using exemption for up to 4.0% lead in copper alloys No
KFB3 X17 Zinc and clear dyed yellow
Compliant using exemption for up to 4.0% lead in copper alloys No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 26 of 49
Type Plating Plating Description Compliant StatusStandard Finish
KFB3 ZB Zinc and black chromate
Compliant using exemption for up to 4.0% lead in copper alloys, date coded on or after September 15 , 2006 No
KFB3 ZC Zinc and yellow chromate
Compliant using exemption for up to 4.0% lead in copper alloys, date coded on or after March 1, 2006 No
KFB3 ZI Zinc and clear chromate
Compliant using exemption for up to 4.0% lead in copper alloys No
KFB3 ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 4.0% lead in copper alloys No
KFE BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
KFE BO Black OxideCompliant using exemption for up to 0.35% lead in steel No
KFE BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No
KFE CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
KFE CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
KFE CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No
KFE CU Copper flashCompliant using exemption for up to 0.35% lead in steel No
KFE DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
KFE ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
KFE ET ElectrotinCompliant using exemption for up to 0.35% lead in steel Yes
KFE X No FinishCompliant using exemption for up to 0.35% lead in steel No
KFE X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No
KFE ZB Zinc and black chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after September 15, 2006 No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 27 of 49
Type Plating Plating Description Compliant StatusStandard Finish
KFE ZC Zinc and yellow chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after March 1, 2006. No
KFE ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel No
KFE ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 0.35% lead in steel No
KFH BN Black NitrideCompliant with no exemptions required No
KFH BO Black OxideCompliant with no exemptions required No
KFH BZ Zinc and blue dyeCompliant with no exemptions required No
KFH CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
KFH CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
KFH CN Bright nickel over copperCompliant with no exemptions required No
KFH CU Copper flashCompliant with no exemptions required No
KFH DT Matte TinCompliant with no exemptions required No
KFH ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
KFH ET ElectrotinCompliant with no exemptions required Yes
KFH X No FinishCompliant with no exemptions required No
KFH X17 Zinc and clear dyed yellowCompliant with no exemptions required No
KFH ZB Zinc and black chromate
Compliant with no exemptions required, date coded on or after September 15, 2006 No
KFH ZC Zinc and yellow chromate
Compliant with no exemptions required, date coded on or after March 1, 2006 No
KFH ZI Zinc and clear chromateCompliant with no exemptions required No
KFH ZTZinc and clear chromate, 96 hr.
Compliant with no exemptions required No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 28 of 49
Type Plating Plating Description Compliant StatusStandard Finish
KFS2 None No finish suffixCompliant with no exemptions required Yes
KFSE None No finish suffixCompliant with no exemptions required Yes
KSSB BN Black Nitride
Compliant using exemption for up to 4.0% lead in copper alloys No
KSSB BO Black Oxide
Compliant using exemption for up to 4.0% lead in copper alloys No
KSSB BZ Zinc and blue dye
Compliant using exemption for up to 4.0% lead in copper alloys No
KSSB CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
KSSB CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
KSSB CN Bright nickel over copper
Compliant using exemption for up to 4.0% lead in copper alloys No
KSSB CU Copper flash
Compliant using exemption for up to 4.0% lead in copper alloys No
KSSB DT Matte Tin
Compliant using exemption for up to 4.0% lead in copper alloys No
KSSB ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
KSSB ET Electrotin
Compliant using exemption for up to 4.0% lead in copper alloys No
KSSB X No Finish
Compliant using exemption for up to 4.0% lead in copper alloys Yes
KSSB X17 Zinc and clear dyed yellow
Compliant using exemption for up to 4.0% lead in copper alloys No
KSSB ZB Zinc and black chromate
Compliant using exemption for up to 4.0% lead in copper alloys, date coded on or after September 15 , 2006 No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 29 of 49
Type Plating Plating Description Compliant StatusStandard Finish
KSSB ZC Zinc and yellow chromate
Compliant using exemption for up to 4.0% lead in copper alloys, date coded on or after March 1, 2006 No
KSSB ZI Zinc and clear chromate
Compliant using exemption for up to 4.0% lead in copper alloys No
KSSB ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 4.0% lead in copper alloys No
LA4 FDry film lube over cadmium
Not compliant because the dry film lubricant contains a lead compound No
LA4 MD Dry film lubeCompliant with no exemptions required Yes
LA4 SF Dry film lube over silver
Not compliant because the dry film lubricant contains a lead compound No
LAC FDry film lube over cadmium
Not compliant because the dry film lubricant contains a lead compound No
LAC MD Dry film lubeCompliant with no exemptions required Yes
LAC SF Dry film lube over silver
Not compliant because the dry film lubricant contains a lead compound No
LAS MD Dry film lubeCompliant using exemption for up to 0.35% lead in steel Yes
LAS SF Dry film lube over silver
Not compliant because the dry film lubricant contains a lead compound No
LAS ZF Dry film/cad/zinc retainer
Not compliant because the dry film lubricant contains a lead compound No
LK EFDry film lube over cadmium
Not compliant because the dry film lubricant contains a lead compound No
LK MD Dry film lubeCompliant using exemption for up to 0.35% lead in steel Yes
LK SF Dry film lube over silver
Not compliant because the dry film lubricant contains a lead compound No
LKA None No finish suffixCompliant with no exemptions required Yes
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 30 of 49
Type Plating Plating Description Compliant StatusStandard Finish
LKS EFDry film lube over cadmium
Not compliant because the dry film lubricant contains a lead compound No
LKS MD Dry film lubeCompliant with no exemptions required Yes
LKS SF Dry film lube over silver
Not compliant because the dry film lubricant contains a lead compound No
MPP X No FinishCompliant with no exemptions required Yes
MS04 BN Black NitrideCompliant with no exemptions required No
MSO4 BO Black OxideCompliant with no exemptions required No
MSO4 X No FinishCompliant with no exemptions required Yes
N10 BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
N10 BO Black OxideCompliant using exemption for up to 0.35% lead in steel No
N10 BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No
N10 CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
N10 CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
N10 CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No
N10 CU Copper flashCompliant using exemption for up to 0.35% lead in steel No
N10 DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
N10 ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
N10 ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No
N10 X No FinishCompliant using exemption for up to 0.35% lead in steel No
N10 X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No
N10 ZB Zinc and black chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after September 15, 2006 No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 31 of 49
Type Plating Plating Description Compliant StatusStandard Finish
N10 ZC Zinc and yellow chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after March 1, 2006. No
N10 ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes
N10 ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 0.35% lead in steel No
NFPA None No finish suffixCompliant with no exemptions required Yes
NFPC BN Black NitrideCompliant with no exemptions required No
NFPC BO Black OxideCompliant with no exemptions required No
NFPC None No finish suffixCompliant with no exemptions required Yes
PF11 BLBlack anodize/black nitride
Compliant using exemption for up to 0.35% lead in steel No
PF11 None No finish suffixCompliant using exemption for up to 0.35% lead in steel Yes
PF11M BLBlack anodize/black nitride
Compliant using exemption for up to 0.35% lead in steel No
PF11M None No finish suffixCompliant using exemption for up to 0.35% lead in steel Yes
PF11MF BLBlack anodize/black nitride
Compliant with no exemptions required No
PF11MF None No finish suffixCompliant with no exemptions required Yes
PF11MW BLBlack anodize/black nitride
Compliant with no exemptions required No
PF11MW None No finish suffixCompliant with no exemptions required Yes
PF11PM BLBlack anodize/black nitride
Compliant using exemption for up to 0.35% lead in steel No
PF11PM None No finish suffixCompliant using exemption for up to 0.35% lead in steel Yes
PF12 BLBlack anodize/black nitride
Compliant using exemption for up to 0.35% lead in steel No
PF12 None No finish suffixCompliant using exemption for up to 0.35% lead in steel Yes
PF12M BLBlack anodize/black nitride
Compliant using exemption for up to 0.35% lead in steel No
PF12M None No finish suffixCompliant using exemption for up to 0.35% lead in steel Yes
PF12MF BLBlack anodize/black nitride
Compliant with no exemptions required No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 32 of 49
Type Plating Plating Description Compliant StatusStandard Finish
PF12MF None No finish suffixCompliant with no exemptions required Yes
PF12MW BLBlack anodize/black nitride
Compliant with no exemptions required No
PF12MW None No finish suffixCompliant with no exemptions required Yes
PF13 BLBlack anodize/black nitride
Compliant using exemption for up to 0.35% lead in steel No
PF13 None No finish suffixCompliant using exemption for up to 0.35% lead in steel Yes
PF13M BLBlack anodize/black nitride
Compliant using exemption for up to 0.35% lead in steel No
PF13M None No finish suffixCompliant using exemption for up to 0.35% lead in steel Yes
PF14 BLBlack anodize/black nitride
Compliant using exemption for up to 0.35% lead in steel No
PF14 None No finish suffixCompliant using exemption for up to 0.35% lead in steel Yes
PF14M BLBlack anodize/black nitride
Compliant using exemption for up to 0.35% lead in steel No
PF14M None No finish suffixCompliant using exemption for up to 0.35% lead in steel Yes
PF30 BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
PF30 CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel Yes
PF31 BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
PF31 CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel Yes
PF32 BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
PF32 CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel Yes
PF50 BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
PF50 CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel Yes
PF60 BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
PF60 CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel Yes
PF7M CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel Yes
PF7MF None No finish suffixCompliant with no exemptions required Yes
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 33 of 49
Type Plating Plating Description Compliant StatusStandard Finish
PFC2 BN Black NitrideCompliant with no exemptions required No
PFC2 BO Black OxideCompliant with no exemptions required No
PFC2 None No finish suffixCompliant with no exemptions required Yes
PFC2P BN Black NitrideCompliant with no exemptions required No
PFC2P BO Black OxideCompliant with no exemptions required No
PFC2P None No finish suffixCompliant with no exemptions required Yes
PFC4 None No finish suffixCompliant with no exemptions required Yes
PFF ### Numeric color code(s)Compliant with no exemptions required Yes
PFHV BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
PFHV CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel Yes
PFK BN Black NitrideCompliant with no exemptions required No
PFK BO Black OxideCompliant with no exemptions required No
PFK None No finish suffixCompliant with no exemptions required Yes
PFLB None No finish suffix
Compliant using exemption for up to 4.0% lead in copper alloys Yes
PFP ### Numeric color code(s)Compliant using exemption for up to 0.35% lead in steel Yes
PFS ### Numeric color code(s)Compliant with no exemptions required Yes
PFS2 BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
PFS2 BO Black OxideCompliant using exemption for up to 0.35% lead in steel No
PFS2 BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No
PFS2 CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
PFS2 CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 34 of 49
Type Plating Plating Description Compliant StatusStandard Finish
PFS2 CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No
PFS2 CU Copper flashCompliant using exemption for up to 0.35% lead in steel No
PFS2 DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
PFS2 ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
PFS2 ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No
PFS2 X No FinishCompliant using exemption for up to 0.35% lead in steel No
PFS2 X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No
PFS2 ZB Zinc and black chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after September 15, 2006 No
PFS2 ZC Zinc and yellow chromate
Compliant with no exemptions required, date coded on or after March 1, 2006 No
PFS2 ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel No
PFS2 ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 0.35% lead in steel No
PFT ### Numeric color code(s)Compliant with no exemptions required Yes
PKB None No finish suffix
Compliant using exemption for up to 4.0% lead in copper alloys Yes
PL BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No
PL CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
PL CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
PL X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No
PL ZB Zinc and black chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after September 15, 2006 No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 35 of 49
Type Plating Plating Description Compliant StatusStandard Finish
PL ZC Zinc and yellow chromate
Compliant with no exemptions required, date coded on or after March 1, 2006 No
PL ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes
PL ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 0.35% lead in steel No
PLC None No finish suffixCompliant with no exemptions required Yes
PPB None No finish suffix
Compliant using exemption for up to 4.0% lead in copper alloys Yes
PR10 BN Black NitrideCompliant with no exemptions required No
PR10 BO Black OxideCompliant with no exemptions required No
PR10 None No finish suffixCompliant with no exemptions required Yes
PS10 BN Black NitrideCompliant with no exemptions required No
PS10 BO Black OxideCompliant with no exemptions required No
PS10 None No finish suffixCompliant with no exemptions required Yes
PSHP ### Numeric color code(s)Compliant with no exemptions required Yes
PSL2 BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
PSL2 CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel Yes
PTL2 BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
PTL2 CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel Yes
RAA None No finish suffixCompliant with no exemptions required Yes
RAS X No FinishCompliant with no exemptions required No
RAS ZI Zinc and clear chromateCompliant with no exemptions required Yes
S:A-‐ON BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
S:A-‐ON BO Black OxideCompliant using exemption for up to 0.35% lead in steel No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 36 of 49
Type Plating Plating Description Compliant StatusStandard Finish
S:A-‐ON BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No
S:A-‐ON CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
S:A-‐ON CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
S:A-‐ON CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No
S:A-‐ON CU Copper flashCompliant using exemption for up to 0.35% lead in steel No
S:A-‐ON DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
S:A-‐ON ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
S:A-‐ON ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No
S:A-‐ON X No FinishCompliant using exemption for up to 0.35% lead in steel No
S:A-‐ON X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No
S:A-‐ON ZB Zinc and black chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after September 15, 2006 No
S:A-‐ON ZC Zinc and yellow chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after March 1, 2006. No
S:A-‐ON ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes
S:A-‐ON ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 0.35% lead in steel No
S:A-‐OTHER BN Black NitrideCompliant with no exemptions required No
S:A-‐OTHER BO Black OxideCompliant with no exemptions required No
S:A-‐OTHER BZ Zinc and blue dyeCompliant with no exemptions required No
S:A-‐OTHER CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
S:A-‐OTHER CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 37 of 49
Type Plating Plating Description Compliant StatusStandard Finish
S:A-‐OTHER CN Bright nickel over copperCompliant with no exemptions required No
S:A-‐OTHER CU Copper flashCompliant with no exemptions required No
S:A-‐OTHER DT Matte TinCompliant with no exemptions required No
S:A-‐OTHER ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
S:A-‐OTHER ET ElectrotinCompliant with no exemptions required No
S:A-‐OTHER X No FinishCompliant with no exemptions required No
S:A-‐OTHER X17 Zinc and clear dyed yellowCompliant with no exemptions required No
S:A-‐OTHER ZB Zinc and black chromate
Compliant with no exemptions required, date coded on or after September 15, 2006 No
S:A-‐OTHER ZC Zinc and yellow chromate
Compliant with no exemptions required, date coded on or after March 1, 2006 No
S:A-‐OTHER ZI Zinc and clear chromateCompliant with no exemptions required Yes
S:A-‐OTHER ZTZinc and clear chromate, 96 hr.
Compliant with no exemptions required No
SCB ZI Zinc and clear chromateCompliant with no exemptions required Yes
SCBJ ZI Zinc and clear chromateCompliant with no exemptions required Yes
SCBR ZI Zinc and clear chromateCompliant with no exemptions required Yes
SF ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes
SFK ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes
SFP None No finish suffixCompliant with no exemptions required Yes
SFW LZ
Zinc w/ clear trivalent chromate + sealant/lubricant
Compliant using exemption for up to 0.35% lead in steel Yes
SFW ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel No
SGPC None No finish suffixCompliant with no exemptions required Yes
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 38 of 49
Type Plating Plating Description Compliant StatusStandard Finish
SKC None No finish suffixCompliant with no exemptions required Yes
SL:A-‐ON BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
SL:A-‐ON BO Black OxideCompliant using exemption for up to 0.35% lead in steel No
SL:A-‐ON BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No
SL:A-‐ON CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
SL:A-‐ON CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
SL:A-‐ON CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No
SL:A-‐ON CU Copper flashCompliant using exemption for up to 0.35% lead in steel No
SL:A-‐ON DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
SL:A-‐ON ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
SL:A-‐ON ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No
SL:A-‐ON X No FinishCompliant using exemption for up to 0.35% lead in steel No
SL:A-‐ON X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No
SL:A-‐ON ZB Zinc and black chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after September 15, 2006 No
SL:A-‐ON ZC Zinc and yellow chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after March 1, 2006. No
SL:A-‐ON ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes
SL:A-‐ON ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 0.35% lead in steel No
SL:A-‐OTHER BN Black NitrideCompliant with no exemptions required No
SL:A-‐OTHER BO Black OxideCompliant with no exemptions required No
SL:A-‐OTHER BZ Zinc and blue dyeCompliant with no exemptions required No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 39 of 49
Type Plating Plating Description Compliant StatusStandard Finish
SL:A-‐OTHER CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
SL:A-‐OTHER CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
SL:A-‐OTHER CN Bright nickel over copperCompliant with no exemptions required No
SL:A-‐OTHER CU Copper flashCompliant with no exemptions required No
SL:A-‐OTHER DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
SL:A-‐OTHER ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
SL:A-‐OTHER ET ElectrotinCompliant with no exemptions required No
SL:A-‐OTHER X No FinishCompliant with no exemptions required No
SL:A-‐OTHER X17 Zinc and clear dyed yellowCompliant with no exemptions required No
SL:A-‐OTHER ZB Zinc and black chromate
Compliant with no exemptions required, date coded on or after September 15, 2006 No
SL:A-‐OTHER ZC Zinc and yellow chromate
Compliant with no exemptions required, date coded on or after March 1, 2006 No
SL:A-‐OTHER ZI Zinc and clear chromateCompliant with no exemptions required Yes
SL:A-‐OTHER ZTZinc and clear chromate, 96 hr.
Compliant with no exemptions required No
SLPS BN Black NitrideCompliant with no exemptions required No
SLPS BO Black OxideCompliant with no exemptions required No
SLPS None No finish suffixCompliant with no exemptions required Yes
SMPS None No finish suffixCompliant with no exemptions required Yes
SMTPR DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
SMTPR ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
SMTPR ET ElectrotinCompliant using exemption for up to 0.35% lead in steel Yes
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 40 of 49
Type Plating Plating Description Compliant StatusStandard Finish
SMTRA DT Matte TinCompliant with no exemptions required No
SMTRA ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
SMTRA ET ElectrotinCompliant with no exemptions required Yes
SMTSO DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
SMTSO ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
SMTSO ET ElectrotinCompliant using exemption for up to 0.35% lead in steel Yes
SO BN Black Nitride
Type SO fasteners with appropriate finish are compliant. The specific part number and date of manufacture can determine whether the product is either lead free or compliant using the exemption for up to 0.35% lead in steel. No
SO BO Black Oxide
Type SO fasteners with appropriate finish are compliant. The specific part number and date of manufacture can determine whether the product is either lead free or compliant using the exemption for up to 0.35% lead in steel. No
SO BZ Zinc and blue dye
Type SO fasteners with appropriate finish are compliant. The specific part number and date of manufacture can determine whether the product is either lead free or compliant using the exemption for up to 0.35% lead in steel. No
SO CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
SO CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 41 of 49
Type Plating Plating Description Compliant StatusStandard Finish
SO CN Bright nickel over copper
Type SO fasteners with appropriate finish are compliant. The specific part number and date of manufacture can determine whether the product is either lead free or compliant using the exemption for up to 0.35% lead in steel. No
SO CU Copper flash
Type SO fasteners with appropriate finish are compliant. The specific part number and date of manufacture can determine whether the product is either lead free or compliant using the exemption for up to 0.35% lead in steel. No
SO DT Matte Tin
Type SO fasteners with appropriate finish are compliant. The specific part number and date of manufacture can determine whether the product is either lead free or compliant using the exemption for up to 0.35% lead in steel. No
SO ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
SO ET Electrotin
Type SO fasteners with appropriate finish are compliant. The specific part number and date of manufacture can determine whether the product is either lead free or compliant using the exemption for up to 0.35% lead in steel. No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 42 of 49
Type Plating Plating Description Compliant StatusStandard Finish
SO X No Finish
Type SO fasteners with appropriate finish are compliant. The specific part number and date of manufacture can determine whether the product is either lead free or compliant using the exemption for up to 0.35% lead in steel. No
SO X17 Zinc and clear dyed yellow
Type SO fasteners with appropriate finish are compliant. The specific part number and date of manufacture can determine whether the product is either lead free or compliant using the exemption for up to 0.35% lead in steel. No
SO ZB Zinc and black chromate
Type SO fasteners with appropriate finish are compliant. The specific part number and date of manufacture can determine whether the product is either lead free or compliant using the exemption for up to 0.35% lead in steel. No
SO ZC Zinc and yellow chromate
Type SO fasteners with appropriate finish are compliant. The specific part number and date of manufacture can determine whether the product is either lead free or compliant using the exemption for up to 0.35% lead in steel. No
SO ZI Zinc and clear chromate
Type SO fasteners with appropriate finish are compliant. The specific part number and date of manufacture can determine whether the product is either lead free or compliant using the exemption for up to 0.35% lead in steel. Yes
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 43 of 49
Type Plating Plating Description Compliant StatusStandard Finish
SO ZTZinc and clear chromate, 96 hr.
Type SO fasteners with appropriate finish are compliant. The specific part number and date of manufacture can determine whether the product is either lead free or compliant using the exemption for up to 0.35% lead in steel. No
SO4 BN Black NitrideCompliant with no exemptions required No
SO4 BO Black OxideCompliant with no exemptions required No
SO4 None No finish suffixCompliant with no exemptions required Yes
SOA None No finish suffixCompliant with no exemptions required Yes
SOAG None No finish suffixCompliant with no exemptions required Yes
SON BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
SON BO Black OxideCompliant using exemption for up to 0.35% lead in steel No
SON BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No
SON CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
SON CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
SON CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No
SON CU Copper flashCompliant using exemption for up to 0.35% lead in steel No
SON DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
SON ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
SON ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No
SON X No FinishCompliant using exemption for up to 0.35% lead in steel No
SON X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 44 of 49
Type Plating Plating Description Compliant StatusStandard Finish
SON ZB Zinc and black chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after September 15, 2006 No
SON ZC Zinc and yellow chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after March 1, 2006. No
SON ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes
SON ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 0.35% lead in steel No
SOS None No finish suffixCompliant with no exemptions required Yes
SOSG BN Black NitrideCompliant with no exemptions required No
SOSG BO Black OxideCompliant with no exemptions required No
SOSG None No finish suffixCompliant with no exemptions required Yes
SP None No finish suffixCompliant with no exemptions required Yes
SS BN Black NitrideCompliant with no exemptions required No
SS BO Black OxideCompliant with no exemptions required No
SS BZ Zinc and blue dyeCompliant with no exemptions required No
SS CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
SS CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
SS CN Bright nickel over copperCompliant with no exemptions required No
SS CU Copper flashCompliant with no exemptions required No
SS DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
SS ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
SS ET ElectrotinCompliant with no exemptions required No
SS X No FinishCompliant with no exemptions required No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 45 of 49
Type Plating Plating Description Compliant StatusStandard Finish
SS X17 Zinc and clear dyed yellowCompliant with no exemptions required No
SS ZB Zinc and black chromate
Compliant with no exemptions required, date coded on or after September 15, 2006 No
SS ZC Zinc and yellow chromate
Compliant with no exemptions required, date coded on or after March 1, 2006 No
SS ZI Zinc and clear chromateCompliant with no exemptions required Yes
SS ZTZinc and clear chromate, 96 hr.
Compliant with no exemptions required No
SSA None No finish suffixCompliant with no exemptions required Yes
SSC None No finish suffixCompliant with no exemptions required Yes
SSS BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
SSS BO Black OxideCompliant using exemption for up to 0.35% lead in steel No
SSS BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No
SSS CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
SSS CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
SSS CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No
SSS CU Copper flashCompliant using exemption for up to 0.35% lead in steel No
SSS DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
SSS ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
SSS ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No
SSS X No FinishCompliant using exemption for up to 0.35% lead in steel No
SSS X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 46 of 49
Type Plating Plating Description Compliant StatusStandard Finish
SSS ZB Zinc and black chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after September 15, 2006 No
SSS ZC Zinc and yellow chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after March 1, 2006. No
SSS ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes
SSS ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 0.35% lead in steel No
STKB None No finish suffix
Compliant using exemption for up to 4.0% lead in copper alloys Yes
STKC BN Black NitrideCompliant with no exemptions required No
STKC BO Black OxideCompliant with no exemptions required No
STKC None No finish suffixCompliant with no exemptions required Yes
TA None No finish suffixCompliant with no exemptions required Yes
TD X No FinishCompliant with no exemptions required No
TD ZI Zinc and clear chromateCompliant with no exemptions required Yes
TDO X No FinishCompliant with no exemptions required No
TDO ZI Zinc and clear chromateCompliant with no exemptions required Yes
TFH BN Black NitrideCompliant with no exemptions required No
TFH BO Black OxideCompliant with no exemptions required No
TFH BZ Zinc and blue dyeCompliant with no exemptions required No
TFH CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
TFH CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
TFH CN Bright nickel over copperCompliant with no exemptions required No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 47 of 49
Type Plating Plating Description Compliant StatusStandard Finish
TFH CU Copper flashCompliant with no exemptions required No
TFH DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
TFH ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
TFH ET ElectrotinCompliant with no exemptions required No
TFH X No FinishCompliant with no exemptions required No
TFH X17 Zinc and clear dyed yellowCompliant with no exemptions required No
TFH ZB Zinc and black chromate
Compliant with no exemptions required, date coded on or after September 15, 2006 No
TFH ZC Zinc and yellow chromate
Compliant with no exemptions required, date coded on or after March 1, 2006 No
TFH ZI Zinc and clear chromateCompliant with no exemptions required Yes
TFH ZTZinc and clear chromate, 96 hr.
Compliant with no exemptions required No
TFHS None No finish suffixCompliant with no exemptions required Yes
TP4 None No finish suffixCompliant with no exemptions required Yes
TPS None No finish suffixCompliant with no exemptions required Yes
TPXS None No finish suffixCompliant with no exemptions required Yes
TSO BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No
TSO BO Black OxideCompliant using exemption for up to 0.35% lead in steel No
TSO BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No
TSO CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
TSO CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
TSO CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 48 of 49
Type Plating Plating Description Compliant StatusStandard Finish
TSO CU Copper flashCompliant using exemption for up to 0.35% lead in steel No
TSO DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
TSO ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
TSO ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No
TSO X No FinishCompliant using exemption for up to 0.35% lead in steel No
TSO X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No
TSO ZB Zinc and black chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after September 15, 2006 No
TSO ZC Zinc and yellow chromate
Compliant using exemption for up to 0.35% lead in steel, date coded on or after March 1, 2006. No
TSO ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes
TSO ZTZinc and clear chromate, 96 hr.
Compliant using exemption for up to 0.35% lead in steel No
TSOA None No finish suffixCompliant with no exemptions required Yes
TSOS None No finish suffixCompliant with no exemptions required Yes
U BN Black NitrideCompliant with no exemptions required No
U BO Black OxideCompliant with no exemptions required No
U None No finish suffixCompliant with no exemptions required Yes
UL CW Carbo waxCompliant with no exemptions required Yes
WN BN Black NitrideCompliant with no exemptions required No
WN BO Black OxideCompliant with no exemptions required No
WN BZ Zinc and blue dyeCompliant with no exemptions required No
WN CCadmium and yellow chromate
Not compliant because finish contains hexavalent chromium No
PennEngineering – RoHS Compliance Chart – 212
www.pemnet.com Page 49 of 49
Type Plating Plating Description Compliant StatusStandard Finish
WN CICadmium and clear chromate
Not compliant because finish contains hexavalent chromium No
WN CN Bright nickel over copperCompliant with no exemptions required No
WN CU Copper flashCompliant with no exemptions required Yes
WN DT Matte TinCompliant using exemption for up to 0.35% lead in steel No
WN ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No
WN ET ElectrotinCompliant with no exemptions required No
WN X No FinishCompliant with no exemptions required No
WN X17 Zinc and clear dyed yellowCompliant with no exemptions required No
WN ZB Zinc and black chromate
Compliant with no exemptions required, date coded on or after September 15, 2006 No
WN ZC Zinc and yellow chromate
Compliant with no exemptions required, date coded on or after March 1, 2006 No
WN ZI Zinc and clear chromateCompliant with no exemptions required No
WN ZTZinc and clear chromate, 96 hr.
Compliant with no exemptions required No
WNS None No finish suffixCompliant with no exemptions required Yes
YXXNONSTANDARD Non-‐Standard Type
Non standard type, please e-‐mail RoHS@pemnet.com for further assistance No
ZIFC BN Black NitrideCompliant with no exemptions required No
ZIFC BO Black OxideCompliant with no exemptions required No
ZIFC None No finish suffixCompliant with no exemptions required Yes
ZZXNONSTANDARD Non-‐Standard Type
Non standard type, please e-‐mail RoHS@pemnet.com for further assistance No
top related