rotary may 2020 24p 01 d · rotary instruments rotary instruments. iso n0. length (mm) medium order...
Post on 21-Oct-2020
4 Views
Preview:
TRANSCRIPT
-
actualsize
0.8
008M 009M 010M 012M
0.9 1.0 1.2
012C
014M
014C
016M
016C
018M
018C
1.4 1.6 1.8 2.1
021M
021C
023M
023C
018F 021F 023F
018XF 021XF 023XF
2.3
ROUND
2.7
010M
010C
012M
012C
014M
014C
2.7 2.7
PEAR
010 012 014830 830 830
008 009 010 012 014 016 018 021 0232.0 2.0 3.0 3.0
INVERTED CONE WITH COLLAR
009 010 012 014
014M012M010M009M
014C
1.2 1.6 1.6
014M
4.0
INVERTED CONE
018 014014012801 801 801 801 801 801 801 801 801 806 806 806 806805 807805805
012M
012C 014C
018M
018C
014M
014C
016M
016C
1.6016801L
ISO No.Size Ø 1/10 mmLength (mm)
Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
Fine Order No.Red Ring 40µm
10.03.0
008M 009M
4.0 6.03.0 4.0 6.03.0 4.0 6.0
CYLINDER
8.0 8.0 10.0
CYLINDER ROUND END
TAPER FLAT END
8.0 10.08.0 8.0014M
014C
014F
016M
016C
016F
014M 016M
016C014C
018M
018C
8.0 10.0 10.0 10.0
TAPER ROUND END (CHAMFER) WHEEL ROUNDEDGE
012010 012014 016016014008 009 010 010 012 014 010 012 014880880 881848 848847847835 835 835 835L 835 835 836 836 836
009C
010M
010C
010M
010C
012M
012C
014M
014C
010M
010C
012M
012C
014M
014C
014M
014C
016M
016C
014M
014C
012M
012C
012M
012C
012F
010M
010C
010F 012F
016M 018M
016C
014 016 014 016 018856 856 850 850 850
1.0041909
041M
041C
10.0018848
018C
HORSELEY DIAMOND BURS FG BULK PACK
$59.95 $59.95 $59.95 $59.95$59.95 $59.95 $59.95 $59.95$59.95 $68.75 $68.75 $68.75
025M
025C
025F
025XF
2.5025801
$79.75
031M
031C
031F
031XF
3.1031801
$79.75 $59.95 $59.95 $59.95$59.95$59.95 $59.95 $68.75 $59.95$68.75
25 pcs/pack $59.95 $59.95 $59.95 $59.95 $68.75$59.95 $59.95 $59.95 $59.95 $59.95 $59.95 $59.95 $59.95 $59.95 $59.95 $59.95 $59.95 $59.95$59.95 $59.95 $59.95 $68.75 $79.95
ISO No.Size Ø 1/10 mmLength (mm)
Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
Fine Order No.Red Ring 40µm
SuperFine Order No.Yellow Ring 20µm
014M
014C
014F
014XF
016M
016C
016F
016XF
021M
021F
021XF
5.0 5.0 5.0
PEAR LONG
014 016 021830L 830L 830L
021C
8.0
010XF
8.0 10.0 10.0 10.0 10.0 11.5 11.5
POINTED CONE
010M
010F
012XF
012M
012F
010XF
010M
010F
3.5 4.5
EGG
4.5023M
023C
023F
023XF
018M
018C
018F
018XF
023M
023C
023F
023XF
018M
018C
018F
018XF
5.0
POINTED BUD
10.0010 012 010 012 014 016 012 016 018 023018 023012 014012 014858 858 859 859 859 859 859L 859L 379 379368 368863 863862 862
8.0
012C
012XF
012M
012F
014XF
014M
014F
012C
012XF010XF
012M
010C
010M
012F
014C
014XF
014M
014F
012XF
012M
012F
012C
012XF
012M
012F
014XF
014M
014F
016C
016XF
016M
016F
016C
016XF
016M
016F
10.08.0010862
010F
8.0
FLA
ME
25 pcs/pack
ISO No.Size Ø 1/10 mmLength (mm)
Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
Fine Order No.Red Ring 40µm
SuperFine Order No.Yellow Ring 20µm
25 pcs/pack
$59.95 $68.75$59.95$59.95 $59.95 $59.95 $59.95 $59.95$59.95 $59.95 $59.95 $59.95$59.95$59.95$59.95 $59.95 $68.75$68.75 $68.75$68.75
May2020
- - - -005 006 007 008
1009 010
20123
0144
0165
0186
0217
0238
ROUND
EDENTA STEEL BURS
Steel Burs RA, 6 pcs/packsize 005-023 ......... $9.90size 025-031 ........ $19.80
0238
0259
02710
02911
03112
actualsize
Buy 5 get 1 (same number)
Buy 5 get1
(same package)
DENTAL MANDRELS STAINLESS STEEL
Dental Mandrels, 6 pcs/packM01 HP ........... $19.80M02 RA ........... $19.80M03 Pop On ... $33.55
M04 Super-Snap® Type ... $27.50M05 OneGloss® Type ....... $27.50M06 Snap-On Prophy ....... $27.50M08 FG/RA Adaptors ....... $38.50
M02
RA
HP
M01
M03
Po
p O
n D
isc
M06
Sna
p-O
n P
rop
hy C
up
M04 M08
Sup
er-S
nap
® T
ype
FG/R
A A
dap
tor
M05
One
Glo
ss®
Typ
e
ROTARYINSTRUMENTSROTARYINSTRUMENTS
-
ISO N0.Length (mm)
Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
Fine Order No.Red Ring 40µm
SuperFine Order No.Yellow Ring 20µm5 Diamond Burs
per box
Fig No.
ISO N0.Length (mm)
Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
5 Diamond Bursper box
Fig No.
ISO N0.Length (mm)
Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
5 Diamond Bursper box
Fig No.
ISO N0.Length (mm)
Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
Fine Order No.Red Ring 40µm
SuperFine Order No.Yellow Ring 20µm5 Diamond Burs
per box
Fig No.
ISO N0.Length (mm)
Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
Fine Order No.Red Ring 40µm
SuperFine Order No.Yellow Ring 20µm5 Diamond Burs
per box
Fig No.
100801/008
0.8100
$19.80
101801/009
0.9101
$19.80
102801/010
1.0102
$19.80
103801/012
1.2103
C103
$19.80
104801/014
1.4104
C104
$19.80
105801/016
1.6105
C105
$19.80
106801/018
1.8106
C106
F106
$22.00
360801/021
2.1360
C360
F360
XF360
$22.00
361801/023
2.3361
C361
F361
XF361
$22.00
362801/025
2.5362
C362
F362
XF362
$24.75
410801/031
3.1410
C410
F410
XF410
$24.75
105L801L/016
1.6105L
C105L
$24.75
131806/009
2.0131
$19.80
132806/010
2.0132
C132
$19.80
133806/012
3.0133
C133
$19.80
134806/014
3.0134
C134
$19.80
135806/016
3.0135
$19.80
ROUND INVERTED CONE WITH COLLAR
120805/008
1.0120
$19.80
121805/009
1.0121
$19.80
122805/010
1.0122
C122
$19.80
123805/012
1.2123
C123
$19.80
124805/014
1.6124
C124
$19.80
125805/016
1.6125
C125
$19.80
126805/018
1.6126
C126
$22.00
226807/014
4.0226
C226
$19.80
227807/016
4.0227
C227
$19.80
230830/010
2.7230
C230
$19.80
230B830/012
2.7230B
C230B
$19.80
231830/014
2.7231
C231
$19.80
232830/016
2.7232
C232
$19.80
366A830L/014
5.0366A
C366A
F366A
XF366A
$19.80
366830L/016
5.0366
C366
F366
XF366
$19.80
367830L/018
5.0367
C367
F367
XF367
$22.00
368830L/022
5.0368
C368
F368
XF368
$22.00
525832/033
5.0525
C525
$24.75
305847/012
8.0305
C305
$19.80
237846/016
6.0237
C237
$19.80
236846/014
6.0236
C236
$19.80
235846/012
6.0235
C235
$19.80
306847/014
8.0306
C306
$19.80
307847/016
8.0307
C307
$19.80
308847/018
8.0308
C308
$22.00
401847/021
8.0401
C401
$22.00
409847/025
8.0409
C409
$24.75
310848/012
10.0310
C310
$19.80
311848/014
10.0311
C311
$19.80
312848/016
10.0312
C312
$19.80
313848/018
10.0313
C313
$22.00
402848/021
10.0402
C402
$22.00
411848/025
9.0411
C411
$24.75
403848L/018
12.0403
C403
$24.75
PEARINVERTED CONE
201835/008
3.0201
$19.80
201B835/009
3.0201B
C201B
$19.80
202835/010
3.0202
C202
$19.80
203835L/010
4.0203
C203
$19.80
204835/012
4.0204
C204
$19.80
205835/014
4.0205
C205
$19.80
206A836/010
6.0206A
C206A
$19.80
206836/012
6.0206
C206
$19.80 $19.80 $19.80 $19.80 $19.80
206B836/014
6.0206B
C206B
301837/012
8.0301
C301
302837/014
8.0302
C302
302B837/016
8.0302B
C302B
303837/018
8.0303
$22.00
276836KR/018
6.0276
C276
$24.75
238836KR/012
6.0
C238
$22.00
431836KR/023
6.0431
C431
$24.75
301A837KR/012
8.0301A
C301A
$22.00
302A837KR/014
8.0302KR
C302A
$22.00
303A837KR/018
8.0303A
C303A C433
$24.75
433837KR/023
8.0433
$24.75
263846KR/018
6.0263
C263
$24.75
463846KR/023
6.0463
$24.75
355847KR/018
8.0355
C355
$24.75
455847KR/023
8.0455
C455
$24.75
CYLINDER
CYLINDERROUND EDGE
TAPER ROUND EDGE
243849/009
4.0243
$19.80
244849/010
4.0244
$19.80
245849/012
4.0245
$19.80
246849/014
4.0246
$19.80
251855/012
6.0251
$19.80
252855/014
6.0252
C252
$19.80
253855/016
6.0253
C253
$19.80
TAPER ROUND END
270838/008
3.0270
$19.80
270B838/009
3.0270B
C270B
$19.80 $19.80 $19.80 $19.80 $19.80 $19.80 $19.80
271838/010
3.0271
C271
272838L/010
4.0272
C272
273838/012
4.0273
C273
347880/010
8.0347
C347
F347
$19.80
348880/012
8.0348
C348
F348
$19.80
349880/014
8.0349
C349
F349
$19.80
349B880/016
8.0349B
C349B
349C880/018
8.0349C
C349C
$22.00
350882/012
10.0350
C350
F350
351882/014
10.0351
C351
F351
CYLINDER ROUND END
281853/010
4.0281
F281
XF281
$19.80
283852/010
6.0283
F283
XF283
$19.80
284852/012
6.0284
F284
XF284
$19.80
330858/010
8.0330
F330
XF330
$19.80
331858/012
8.0331
F331
XF331
$19.80
332858/014
8.0332
F332
XF332
$19.80
333858/016
8.0333
F333
XF333
$19.80
335859/010
10.0335
F335
XF335
$19.80
336859/012
10.0336
C336
F336
XF336
$19.80
336B859/014
10.0336B
C336B
F336B
XF336B
$19.80
337859/016
10.0337
C337
F337
XF337
$19.80
338859/018
10.0338
C338
F338
XF338
$22.00
412859/021
10.0412
C412
F412
XF412
$22.00
336L859L/012
11.5336L
C336L
F336L
XF336L
$22.00
337L859L/016
11.5337L
C337L
F337L
XF337L
$22.00
POINTED CONE
TAPER FLAT END
INT
ER
PR
OX
IMA
L
378392/016
5.0378
F378
XF378
$22.00
HORSELEYDIAMONDBURS FG
actual size
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-7192
Diamond Burs FG
For every 2 boxes ofHorseley Diamond Burs FG purchased (any mix)get one 050 Bur Dispenser (FG or MIX)
(for Bur Dispenser details, please refer to p.3)
Buy 5 get 1 (same number)
-
ISO N0.Length (mm)
Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
Fine Order No.Red Ring 40µm
SuperFine Order No.Yellow Ring 20µm
5 Diamond Bursper box
Fig No.
ISO N0.Length (mm)
Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
Fine Order No.Red Ring 40µm
SuperFine Order No.Yellow Ring 20µm5 Diamond Burs
per box
Fig No.
ISO N0.Length (mm)
Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
Fine Order No.Red Ring 40µm
SuperFine Order No.Yellow Ring 20µm5 Diamond Burs
per box
Fig No.
ISO N0.Length (mm)
5 Diamond Bursper box
Medium Order No.Without Ring 115µm
Fig No.
320A856/010
8.0
C320A
F320A
XF320A
$19.80
320856/012
8.0320
C320
F320
XF320
$19.80
321856/014
8.0321
C321
F321
XF321
$19.80
322856/016
8.0322
C322
F322
XF322
$19.80
323856/018
8.0323
C323
F323
XF323
$22.00
344A863/012
10.0344A
C344A
F344A
XF344A
$22.00
323B856B/018
8.5323B
C323B
$22.00
344B863/014
10.0344B
C344B
F344B
XF344B
$22.00
404856/021
8.0404
C404
$22.00
344C863/016
10.0344C
C344C
F344C
XF344C
$22.00
344863/018
10.0344
C344
F344
XF344
$24.75
372C878K/018
8.0372C
C372C
F372C
$24.75
405878K/021
8.0405
C405
F405
$24.75
373A879K/010
10.0373A
C373A
$22.00
324850/012
10.0324
C324
F324
XF324
$19.80
446863/024
10.0446
C446
F446
XF446
$27.50
373B879K/012
10.0373B
C373B
F373B
$22.00
373C879K/014
10.0373C
C373C
F373C
$22.00
373879K/016
10.0373
C373
F373
$22.00
374879K/018
10.0374
F374
$24.75
408879K/021
10.0408
C408
F408
$24.75
218877/012
6.0218
C218
F218
$22.00
217877/010
6.0217
C217
F217
$22.00
216876/010
4.0216
C216
F216
$22.00
315878/010
8.0
C315
F315
$22.00
316878/012
8.0316
C316
F316
$22.00
317878/014
8.0317
C317
F317
$22.00
318A879/012
10.0318A
C318A
F318A
$22.00
318879/014
10.0318
C318
F318
$22.00
319879/016
10.0319
C319
F319
$22.00
256884/010
6.0256
C256
F256
$22.00
257884/012
6.0257
C257
F257
$22.00
352A885/010
8.0352A
C352A
F352A
$22.00
352885/012
8.0352
C352
F352
$22.00
352B885/014
8.0352B
C352B
F352B
$22.00
357A886/012
10.0357A
C357A
$22.00
357886/014
10.0357
C357
$22.00
358886/016
10.0358
C358
$22.00
324B850/014
10.0324B
C324B
F324B
XF324B
$19.80
325850/016
10.0325
C325
F325
XF325
$19.80
326850/018
10.0326
C326
F326
XF326
$22.00
326B850B/018
10.5326B
C326B
$22.00
406850/021
10.5406
C406
$22.00
TAPER ROUND END (CHAMFER)
435909/037
1.0435
C435
$24.75
436909/041
1.0436
C436
$24.75
516909/046
1.5516
C516
$27.50
WHEELROUND EDGE
419899/027
7.0419
C419
$24.75
400811/031
4.0
C400
$24.75
500811/032
4.2500
C500
$24.75
501811/037
7.0501
C501
$24.75
502811/047
7.0502
C502
$27.50
BARREL
340862/010
8.0340
C340
F340
XF340
$22.00
341862/012
8.0341
C341
F341
XF341
$22.00
342862/014
8.0342
C342
F342
XF342
$22.00
343862/016
8.0343
C343
F343
XF343
$22.00
FLAME
165889/009
3.5165
F165
XF165
$22.00
FLAME
286860/010
4.0286
C286
F286
XF286
$22.00
287860/012
5.0287
C287
F287
XF287
$22.00
288860/014
5.0288
C288
F288
XF288
$22.00
289860/016
5.0289
C289
F289
XF289
$22.00
FLAME
255379/014
3.0255
F255
XF255
$22.00
396379/018
3.5396
C396
F396
XF396
$24.75
416379/023
4.5416
C416
F416
XF416
$24.75
EGG
241368/016
3.5241
C241
F241
XF241
$22.00
296368/018
4.5296
C296
F296
XF296
$24.75
300368/023
5.0300
C300
F300
XF300
$24.75
530369/033
5.5530
C530
$27.50
POINTED BUD
220877K/012
7.0
C220
F220
$22.00
221877K/014
7.0221
C221
F221
$22.00
222877K/016
8.0222
C222
F222
$22.00
223877K/018
7.0223
C223
F223
$24.75
GINGIVAL CURETTAGE
BEVELED CYLINDER
372B878K/016
8.0372B
C372B
F372B
$22.00
370878K/010
8.0370
C370
F370
$22.00
371878K012
8.0371
C371
F371
$22.00
372878K/014
8.0372
C372
F372
$22.00
HORSELEYDIAMONDBURS FG
S101S801/009
0.9S101
$27.50
S103S801/012
1.2S103
$27.50
S105S801/016
1.6S105
$27.50
S106S801/018
1.8S106
$27.50
S360S801/021
2.1S360
$27.50
S132S806/010
2.0S132
$27.50
S133S806/012
3.0S133
$27.50
S201S835/008
3.0S201
$27.50 $27.50 $27.50 $27.50 $27.50 $27.50 $33.55 $33.55
S201BS835/009
3.0S201B
S202S835/010
4.0S202
S203S835L/010
4.0S203
S204S835/012
4.0S204
S283S852/010
6.0S283
S300S368/023
5.0S300
S368S830L/022
5.0S368
ISO N0.Length (mm)
5 Diamond Bursper box
Medium Order No.Without Ring 115µm
Fig No.
actualsize
actualsize
• Specially designed for cleaning and autoclaving of burs• Locks open or closed for processing• Medical grade plastic, autoclavable up to 135ºC• Size: 75 mm x 35 mm x 10 mm
050-FG, Bur Dispenser 12 FG .............. $16.50050-MIX Bur Dispenser 6 FG + 6 RA ... $16.50
COLOURSCOLOURS Blue Light Blue Green Yellow White Light Beige Lavender
050-MIX
050-FG
AUTOCLAVABLE PLASTIC BUR DISPENSERS HORSELEYDIAMOND BURS
SHORT SHANKS FG
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719 3
Diamond Burs FG
Buy 5 get 1 Buy 5 get 1 (same number)
For every 2 boxes of Horseley Diamond Burs FG purchased (any mix)get one 050 Bur Dispenser (FG or MIX) (for Bur Dispenser details, please refer to above)
Buy 5 get 1 (same number)
-
805 805 805010 012 0141.0 1.0 1.6
010M 012M 014M
012C 014C
INVERTED CONE INVERTED CONEWITH COLLAR
$22.00 $22.00 $22.00 $22.00 $22.00 $24.75$22.00$22.00$22.00$22.00$22.00
8060102.0
010M
8060123.0
012M
012C
8060143.0
014M
014C
Length (mm)Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
Fine Order No.Red Ring 40µm
SuperFine Order No.Yellow Ring 20µm
ISO No.
5 Diamond Bursper box
Size Ø 1/10 mm801 801 801 801 801 801 801 801 801 801 801 801 801007 008 009 010 012 014 016 018 021 023 025 029 0350.7 0.8 0.9 1.0 1.2 1.4 1.6 1.8 2.1 2.3 2.5 2.9 3.5
007M 008M 009M 010M 012M 014M 016M 018M 021M 023M 025M 029M 035M
012C 014C 016C 018C 021C 023C 025C 029C 035C
018F 021F 023F 025F
018SF 021SF 023SF 025SF
ROUND
$33.55 $24.75 $24.75 $27.50 $33.55 $38.50$27.50$27.50$24.75$24.75$24.75$22.00$22.00 $22.00 $22.00 $22.00 $22.00 $22.00
ISOBUR DIAMOND BURS FGLONG ROUND
0141.4 1.6 2.3 2.9 3.5
801L 801L 801L 801L 801L016 023 029
014M 016M
035
023M
014C 016C 023C 029C 035C
Length (mm)Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
ISO No.
5 Diamond Bursper box
Size Ø 1/10 mm
014F 016F 029F 035F
016SF
807 807 807 807 807
INVERTED CONE
0103.0 3.5 3.5 4.0 5.0
012 014 016 018
010M 012M 014M 016M 018M
FLAT END CYLINDER KR CYLINDERMODIFIED SHOULDERKR CYLINDERMODIFIED SHOULDER
835 835 835 835 835 835007 008 009 010 012 0143.0 3.0 3.0 4.0 4.0 4.0
007M 008M 009M 010M 012M 014M
009C 010C 012C 014C
835KR 835KR 835KR 835KR008 010 012 0143.0 4.0 4.0 4.0
008M 010M 012M 014M
010C 012C 014C
836KR 836KR 836KR 836KR008 010 012 0146.0 6.0 6.0 6.0
008M 010M 012M 014M
012C 014C
$24.75$24.75$24.75$24.75$24.75$22.00$22.00$22.00$22.00$22.00$22.00 $24.75$24.75$24.75
Length (mm)Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
ISO No.
5 Diamond Bursper box
Size Ø 1/10 mm
845KR 845KR 845KR016 018 0254.0 4.0 4.0
016M 018M
016C 018C 025C
846 846 846012 014 0166.0 6.0 6.0
012M 014M 016M
012C 014C 016C
847 847 847 847 847010 012 014 016 0188.0 8.0 8.0 8.0 8.0
010M 012M 014M 016M 018M
012C 014C 016C 018C
KR FLAT ENDTAPER
FLAT ENDTAPER
FLAT END TAPER ROUND END TAPER
8490094.0
009M
8490104.0
010M
8490254.0
025M
025C
$33.55$24.75$22.00$22.00$22.00$22.00$22.00$22.00$22.00 $33.55$27.50$24.75$27.50$24.75
Length (mm)Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
ISO No.
5 Diamond Bursper box
Size Ø 1/10 mm
822 822 822 822008 009 010 0122.0 2.0 2.0 3.0
008M 009M 010M 012M
012 014 016 018 0214.0 5.0 5.0 5.0 5.0
012M 014M 016M 018M 021M
012C 014C 016C 018C 021C
014SC 016SC
012F 014F 016F 018F
012SF 014SF 016SF 021SF
PEAR LONG PEAR
830 830 830 830L 830L 830L 830L 830L009 010 012 2.7 2.7 2.7
009M 010M 012M
012C
PEAR
$24.75$24.75$22.00$22.00$22.00$22.00$22.00$22.00$22.00$22.00$22.00$22.00
Length (mm)Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
SuperCoarse Order No.Black Ring 180µm
Fine Order No.Red Ring 40µm
SuperFine Order No.Yellow Ring 20µm
ISO No.
5 Diamond Bursper box
Size Ø 1/10 mm
012C
909 909037 0401.0 1.0
037M 040M
037C 040C
037SC 040SC
$33.55$33.55$33.55
WHEEL
8170470.5
047C
WHEEL
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-7194
Diamond Burs FG
For every 2 boxes ofISOBUR Diamond Burs
FG purchased (any mix)get one 050 Bur Dispenser
(FG or MIX) (for Bur Dispenser details, please refer to p.3)
Buy 5 get 1 (same number)
-
ISOBUR DIAMOND BURS FG
862 862 862 862 862009 010 012 014 0168.0 8.0 8.0 8.0 8.0
009M 010M 012M 014M 016M
010C 012C 014C 016C
009F 010F 012F 014F 016F
009SF 010SF 012SF 014SF
$24.75 $24.75 $24.75 $24.75 $24.75
863 863 863 863010 012 014 01610.0 10.0 10.0 10.0
010M 012M 014M 016M
012C 014C 016C
010F 012F 014F 016F
010SF 012SF 014SF
$24.75 $24.75 $24.75 $24.75 $24.75
8830103.0
010M
010F
$24.75
8880128.0
012M
012C
012F
012SF
$24.75
889 889009 0103.5 4.0
009M 010M
009F 010F
009SF 010SF
$24.75 $24.75
FLAME FLAME FLAME FLAME FLAME
Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
Fine Order No.Red Ring 40µm
SuperFine Order No.Yellow Ring 20µm
ISO No.
5 Diamond Bursper box
Length (mm)Size Ø 1/10 mm
864
FLAME
012
012F
12.0
880 880 880 880010 012 014 0166.0 6.0 6.0 6.0
010M 012M 014M 016M
012C 014C 016C
010F 012F 014F
$24.75 $24.75 $24.7 $24.75 $24.75 $24.75 $24.75 $27.505 $24.75
ROUND END CYLINDERROUND END CYLINDER
860 860 860 860010 012 014 0164.0 5.0 5.0 5.0
010M 012M 014M 016M
012C 014C 016C
010F 012F 014F 016F
010SF 012SF 014SF
$24.75 $24.75 $24.75 $24.75
861 861012 0146.0 6.0
012M 014M
012C 014C
012F 014F
012SF 014SF
$24.75 $24.75
FLAMEFLAME
Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
Fine Order No.Red Ring 40µm
SuperFine Order No.Yellow Ring 20µm
ISO No.
5 Diamond Bursper box
Length (mm)Size Ø 1/10 mm
8.0 8.0010 012
8.0014
8.0016
8.0018
012M 014M 016M 018M
010C 012C 014C 016C 018C
012F 014F 016F
881 881 881 881 881
actual size
882 882012 01410.0 10.0
012M 014M
012C 014C
012F 014F
$24.75 $24.75
ROUND ENDCYLINDER
858 858 858010 012 0148.0 8.0 8.0
010M 014M
010C 012C
010F 012F 014F
010SF 012SF 014SF
$24.75 $24.75 $24.75
859 859 859 859 859010 012 014 016 01810.0 10.0 10.0 10.0 10.0
010M 012M 014M 016M 018M
010C 012C 014C 016C 018C
010F 012F 014F 016F 018F
010SF 012SF 014SF 016SF 018SF
$24.75 $24.75 $24.75 $24.75 $27. $24.75 $24.75 $24.75 $27.50 $33.5550
NEEDLE NEEDLE
859L 859L 859L
LONG NEEDLE
11.5 11.5 11.5010 014 016
016C
010F 014F 016F
014SF
010M 014M 016MMedium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
Fine Order No.Red Ring 40µm
SuperFine Order No.Yellow Ring 20µm
ISO No.
5 Diamond Bursper box
Length (mm)Size Ø 1/10 mm
OCCLUSALCONTOURING
8330213.5
021F
021SF
8330313.5
031F
031SF
$24.75 $24.75$24.75 $24.75 $24.75 $24.75
878 878 878 878
MODIFIED BEVELED CYLINDER
8.0 8.0008 010
8.0014
8.0016
008M 010M
014C 016C010C
010F
879L 879L
12.0 12.0
MODIFIED BEVELED CYLINDERLONG VERSION
012 014
012M 014M
014C
$24.75 $24.75 $24.75 $24.75
MODIFIED BEVELED CYLINDER
10.0 10.0 10.0 10.0010 012 014 016
010M 012M
010C 012C 014C 016C
879 879 879 879
KR FLAT END TAPER
8.0 8.0 8.0016847KR 847KR 847KR
018 023
016M
016C
018M
018C 023C
$24.75 $27.50 $27.50
Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
Fine Order No.Red Ring 40µm
ISO No.
5 Diamond Bursper box
Length (mm)Size Ø 1/10 mm
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719 5
Diamond Burs FG
SHORT SHANK
0104.0
835 801
SS010C
012
SS012M
Length (mm)Size Ø 1/10 mm
Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
ISO No.
5 pcs/pack
SS014C SS016C SS018C
8.0 8.0 8.0
856014
856016
856018
FLAT ENDCYLINDER ROUND
ROUND END TAPER MODIFIED BEVELED CYLINDER
1.2
$24.75 $24.75 $27.50 $27.50 $27.50
For every 2 boxes ofISOBUR Diamond Burs FG purchased (any mix)get one 050 Bur Dispenser (FG or MIX)
(for Bur Dispenser details, please refer to p.3)
Buy 5 get 1 (same number)
-
ROUND END TAPER (CHAMFER)FLAT END TAPER
ROUND END TAPER (CHAMFER)EXTRA LONG
ISO No.Size 1/10 mmLength mm
848 848 848 848 848010 012 014 016 01810.0 10.0 10.0 10.0 10.0
010M 012M 014M 016M 018M
012C 014C 016C 018C
5 Diamond Bursper box
850 850 850 850 850 850010 012 014 016 018 02310.0 10.0 10.0 10.0 10.0 10.0
010M 012M 014M 016M 018M
010C 012C 014C 016C 018C 023C
014SC 016SC 018SC
010F 012F 014F 016F 018F
010SF 012SF 014SF 016SF 018SF
850L 850L 850L 850L012 014 016 01811.5 11.5 11.5 11.5
014M 016M 018M
012C 014C 016C 018C
014SC 016SC 018SC
012F 014F 016F
$33.55$27.50$27.50$27.50$27.50 $27.50$24.75$24.75$24.75$24.75$27.50$24.75$24.75$24.75$24.75
BULLET
3900163.5
016M
016C
016F
016SF
$24.75
368 368 368016 018 023
379 379 379016 018 023
3.5 4.5 5.0
016M 018M 023M
016C 018C 023C
018SC 023SC
016F 018F 023F
016SF 018SF 023SF
$24.75 $27.50 $27. $33.5550
3.5 3.5 4.5
016M 018M 023M
016C 018C 023C
018SC 023SC
016F 018F 023F
016SF 018SF 023SF
$24.75 $27.50 $27. $33.55 $33.55 $38.5050
FOOTBALLFOOTBALL POINTED
Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
SuperCoarse Order No.Black Ring 180µm
Fine Order No.Red Ring 40µm
SuperFine Order No.Yellow Ring 20µm
ISO No.
5 Diamond Bursper box
Length (mm)Size Ø 1/10 mm
POINTEDFOOTBALL
0255.5
369
025M
025C
025F
025SF
811 811 8110334.2 7.0 7.0
037 047
047M
033C 037C 047C
BARREL
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-7196
Diamond Burs FG
Length (mm)Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
Fine Order No.Red Ring 40µm
ISO No.
5 Diamond Bursper box
LONG CYLINDER
10.0 10.0 10.0 10.0010837 837 837 837
012 014 016
010M 012M 014M
010C 012C 014C 016C
8.0 8.0 8.0 8.0010837KR 837KR 837KR 837KR
012 014 016
010M 012M 014M 016M
012C 014C 016C
Size Ø 1/10 mm
ISOBUR DIAMOND BURS FGKR CYLINDER
$24.75$24.75 $24.75 $24.75 $24.75 $24.75 $24.75 $24.75
840
010 012 0140.1 0.1 0.1
010M 012M 014M
839 840839 840839
010 012 0140.1 0.1 0.1
010M 012M 014M
010F 012F 014F
END CUTTING FLAT END CUTTING TAPER
$27.50$27.50$27.50$27.50$27.50$27.50
856L 856L 856L014 016 0189.0 9.0 9.0
014M 016M
014C 016C 018C
016SC 018SC
016F 018F
$27.50 $27.50 $33.55
856 856 856 856 856 856 856010 012 014 016 018 021 0258.0 8.0 8.0 8.0 8.0 8.0 8.0
010M 012M 014M 016M 018M 021M 025M
012C 014C 016C 018C 021C 025C
014SC 016SC 018SC 021SC
012F 014F 016F 018F 021F 025F
012SF 014SF 016SF
$24.75 $24.75 $24.75 $24.75 $27.50 $27.50 $33.55
855 855 855012 014 0256.0 6.0 7.0
012M 014M 025M
012C 014C 025C
025SC
012F 014F
$24.75 $24.75 $33.55
852 852010 0124.0 6.0
010M 012M
010F 012F
010SF 012SF
$24.75 $24.75
XMAS TREEROUND END TAPER(CHAMFER)
ROUND END TAPER(CHAMFER)
ROUND END TAPER LONG(CHAMFER)
actualsize
Medium Order No.Without Ring 115µmCoarse Order No.Green Ring 150µm
SuperCoarse Order No.Black Ring 180µm
Fine Order No.Red Ring 40µm
SuperFine Order No.Yellow Ring 20µm
ISO No.
5 Diamond Bursper box
Length (mm)Size Ø 1/10 mm
Special micro sized heads for minimal invasive, restorative dentistry and children’s dentistry (paedodontology).
ISOBUR DIAMOND BURS FG
ISO No.Size 1/10 mmLength mm
801 805 805 835 838 838L 846 852 860 883 889007M-KID 008M-KID 010M-KID 008M-KID 007M-KID 007M-KID 012M-KID 007M-KID 007M-KID 007M-KID 007M-KID
- 1.0 1.0 3.0 2.0 3.5 6.0 2.0 2.0 2.0 3.5
FINE 40µm actualsize
Kiddies Fine FGeach $8.80• Kiddies are specially designed for preparation in a child’s mouth
and for difficult-to-reach areas• The specially designed tiny heads can easily clean and open fissures for sealing• The shorter FG shank allows for precise work even in the rear molar area• The tooth can be gently prepared with fine grit instruments
• Highest precision during production guarantees unequalled concentric run of the instruments• The special UniMatrix® diamond coating improves stability of the instrument which results in extreme durbility and long-life• A wide variety of shapes is available for patient and technique-oriented selection.
For every 2 boxes ofISOBUR Diamond Burs
FG purchased (any mix)get one 050 Bur Dispenser
(FG or MIX) (for Bur Dispenser details, please refer to p.3)
Buy 5 get 1 (same number)
Buy 5 get1
-
TURBO CHALLENGE!ISO TURBO DIAMONDS incorporate Unimatrix® diamond bonding with stainless shanks. Turbo Diamonds have a diamond free zone or “continual spiral of blank space” which offers several advantages:• The diamond free zone breaks the surface contact of the instrument at the operative site, allowing water to flow promoting a cooler and cleaner cut. This maximizes cutting efficiency and eliminates excessive heat generation• Diamond free zones act like flutes on a bur which remove debris from the operative site. Since diamonds cut by grinding versus the chipping action of a carbide,Turbo’s will not catch or grab at amalgam or metal• The continual spiral design of the Turbo Diamonds leaves precise, smooth axial walled preparations• Turbo Diamonds are available in friction grip (FG) Super coarse only (180 µm diamond particle)
T8560128.0
012SC$11.55
T8560148.0
014SC$11.55
T8560168.0
016SC$11.55
T8560188.0
018SC$12.65
T8560258.0
025SC$14.85
T830L0185.0
018SC$12.65
T3790234.5
023SC$12.65
ISO No.Size 1/10 mmLength (mm)
Super Coarse Order No.Black Ring 180 m
each
T85001410.0
014SC$11.55
T85001610.0
016SC$11.55
T85001810.0
018SC$12.65
T8470148.0
014SC$11.55
T8470168.0
016SC$11.55
T8470188.0
018SC$12.65
actual size
TURBO DIAMOND ISOBURS FG
LONG PEAR
Diamond-free cooling zonesabsorb normal heat generation,
resulting in fast reduction while remaining cool
ROUND END TAPER (CHAMFER) FOOTBALLROUND END TAPER (CHAMFER)FLAT END TAPER
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719 7
Diamond Burs FG
ISO No.
Length (mm)Medium Order No.Without Ring 125µm
Fine Order No.Red Ring 40µm
970 980 985023 027 0311.6 1.6 1.7
023M 027M 031M
023F 027F 031F
ISOBUR DIAMOND BURS FG AND
actualsize
actualsize
actual sizeFig No.ISO Ref.
Length mm
W102W801/010
1.0W102
W104W801/014
1.4W104
W106W801/108
1.8W106
W361W801/023
2.3W361
W201BW835/009
3.0W201B
W204W835/012
4.0W204
W206BW836/014
6.0W206B
W237W846/016
6.0W237
W296W368/018
4.5W296
each
HORSELEY DIAMONDBURS
ISOBUR DIAMOND BURS FGDEPTH MARKERS
ISO No.
Length (mm)
828 828026 0301.0 1.0
0.5mm 0.7mm026M 030M
834A0313.5
1.0mm031M
8340166.0
0.3mm016M
8340216.0
0.5mm021M
Depth of cutting
3 pcs/pack
each
Medium Order No.Without Ring 115µm
Fine Order No.Red Ring 40µm
SuperFine Order No.Yellow Ring 20µm
ISO No.
EDENTA DIAMOND BURS RAL/RAXL
831
831-RAL 012F
831-RAL 012M
831L831L-RAXL 012M
831L-RAXL 012F
831L-RAXL 012SF
832L832L-RAXL 014M
832L-RAXL 014F
832L-RAXL 014SF
832832-RAL 014M
832-RAL 014F
832-RAL 014SF831-RAL 012SF
$49.50
$9.90 $11.55 $12.65
$49.50$49.50 $49.50
opt.
12’0
00 rp
m
opt.
12’0
00 rp
m
opt.
12’0
00 rp
m
opt.
12’0
00 rp
m
RAL RALRAXL RAXL
1.0 1.2 1.4 1.6 1.8 2.3 2.9
ROUND
1.0 1.6012RA 014RA
INVERTED CONE
FLAT END CYLINDER
014805
012805
029RA
029801
023RA
023801
018RA
018801
016RA
016801
014RA
014801
012RA
012801
010RA
010801
$38.50
1.0010RA
010805
$38.50 $38.50
$38.50$38.50
4.0 4.0 4.0 4.0012RA 014RA
014835
012835
$38.50
4.0010RA
010835
3.5016RA
016368
$38.50
014RA
014845
$38.50
010RA
010845
$38.50
$44.55$38.50$38.50$38.50$38.50$38.50$38.50
EDENTADIAMONDBURS
FOOTBALLPOINTED
Length (mm)Size Ø 1/10 mm
Medium Order No.Without Ring 115µm
ISO No.
6 pcs/pack
Length (mm)Size Ø 1/10 mm
Medium Order No.Without Ring 115µm
ISO No.
6 pcs/pack
Size Ø 1/10 mm
Medium Order No.Without Ring 115µm
Medium Order No.Without Ring 125µm
FLAT END TAPER
Size Ø 1/10 mm
Buy 5 get1
Buy 5 get1
Buy 5 get1 Buy 5 get 1
Buy 5 get 1
Buy 5 get1
(same number)
$13.75 $14.85 $14.85 $13.75 $14.85
Diamond Bur RAeach $6.60
-
EDENTA TRIMMERS FGTissue Trimmer STT/FG-Shank:Designed for soft-tissue surgery, the STT ceramic tissue trimmer is a rotary instrument that can be used as an alternative to electrosurgery and surgical blades. The biocompatible hard oxide point is said to cut tissue without burning. Applications include modelling gingiva, opening the sulcus for impression, freeing deep cavities, lacerating inter-radicular granulation-tissue, removing gingival hyperplasia/papillectomies, and exposing intra-osseous implant sections and retinated teeth.Speed: Air turbine 300.000 - 500.00 rpmTo be used without any water/spray cooling
Order No. STT249 FG 0165.0016
STT250 FG 0168.0016ISO Size 1/10 mm
Length (mm)
Soft Tissue Trimmer FGeach … $99.00
Recovering implants Excising Mucosa
actual size
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-7198
Sundries
1,5
8,5GF844 TwoGrit DiamondSpecial diamond instrument used for preparing and finishing without changing the instrument when preparing for a veneer. The working section of the Two Grit diamond instruments consists of two different diamond grits.The main conical section is coated with coarse diamond grit and the tip with fine diamond grit. The coarse grit enables rapid material removal and the fine diamond grit of the tip guarantees a perfectly finished preparation margin. Speed opt. 70,000 - 140,000 rpm.
opt.
70’0
00
- 140
’000
rpm
opt.
70’0
00
- 140
’000
rpm
$68.75
L (mm)
5 pcs/box014 016
Order No. GF844FG014
$68.75
10.0 10.0GF844FG016
Size Ø ¹/10 (mm)
GF844ROUND END TAPER
EDENTA DIAMOND BURS FG
$68.75 $68.75 $68.75 $68.755 pcs/packOrder No.
max
. 160
’000
rpm
max
. 160
’000
rpm
max
. 20’
000
rpm
max
. 20’
000
rpmEDENTA INTRAORAL
FINISHING BURS FGWORK ON
Intraoral Trimming of Titanium AbutmentsThe use of titanium abutments in implant prosthetics requires special instruments for adjustments and adaptation, for example recontouring for adapting the path of insertion of the restoration on the titanium abutments. The tungsten carbide instruments witha coarse cross-cut, which were specially developed for trimming titanium alloys, guarantee optimal contouring of titanium materials(Figure 1). The titanium surfaces are then finished using the congruently shaped red ring finishers (Figure 2).
TC847KRG.FG.016
(1)
TC336.FG.016
(2)
CONTOURING FINISHING
TC847KRGFG016 TC379GFG023 TC336FG016 TC379FG023
EDENTA FG/FGL/RA/RALThe perfect completion of a bracket treatment. New adhesive remover, specially designed for this task.Removes adhesive residues, does not damage the enamel and creates smooth surfaces.• The special blades remove the resin without injuring the tooth• The safety bevel at the end of the blades reduces the risk of cutting striations in the enamel surface• The various lengths of blade simplify trimming smaller and larger areas• The safe-tip prevents injury to the gingival margin• Available in FG or RA
Adhesive Removers, 5 pcs/boxC22AGK-FG …............. $99.55C22ALGK-FGL …......... $99.55C22AGK-RA …............. $99.55C22ALGK-RAL …......... $99.55
C22
ALG
K-F
GL
C22
AG
K-F
G
C22
ALG
K-R
AL
C22
AG
K-R
A
Safety chamfer sectionto void flute forming
Smooth dome-shaped instrumenthead for gingival protection
$77.55
Size Ø ¹/10 (mm)L (mm)
6 pcs/pack
10.0050
Order No. 1332RA
$77.55
6.0030
1333RA
$49.50
Size Ø ¹/10 (mm)L (mm)
12 pcs/pack
10.0050
Order No. 0352RA
$49.50
10.0050
0362RA
$49.50
10.0050
0372RASTEP 1 2 3
OrthoFlex Polisher (adhesive remover)There are several methods used for removal of residual resin after debonding of orthodontic brackets. Therefore, the method of removal of the residual resin is very important to avoid damages on enamel. However, carbide burs are harder than enamel and when used at high speed, can damage the underlying enamel. We recommend using our new developed OrthoFlex Polisher which produces the finest scratch pattern with the least enamel loss. Advantages of the OrthoFlex polisher: Used for reliable, gentle removal of residual adhesive without damaging the natural tooth structure achieved by a special grit, which despite having a high polishing capacity is not harder than the natural tooth structure. Especially reliable alternative to adhesive or cement residue removal using rotary diamond or metal instruments. After removal of the adhesive the teeth are re-polished using: Exa Cerapol 1 = pre-polishing enamel, 2 = polishing enamel, Cerapol Super 3 = natural high-lustre polish.
Exa CerapolCerapol Super
ORTHOFLEX POLISHERS RA
OrthoFlex
max
. 15’
000
rpm
max
. 15’
000
rpm
max
. 10’
000
rpm
max
. 10’
000
rpm
max
. 5’0
00 rp
m
STODDARD FG
max. 300’000 rpm
$27.50 $33.55 $13.75 $13.75 $14.85$14.85 $14.855 pcs/pack
6.01.6
6.02.1
L (mm)Ø (mm)
0.3 0.5T (mm)
ISO Order No. D834.016 D834.021
actualsize
DIAMONDBURS FG
ISO No.
Length (mm)
828 828026 0301.0 1.0
0.5 mm 0.7 mm026M 030M
834A0313.5
1.0 mm031M
8340166.0
0.3 mm016M
8340216.0
0.5 mm021M
Depth of cutting
each
Size Ø 1/10 mm
Medium Order No.Without Ring 125µm
Buy 5 get1
Buy 5 get 1
Buy 5 get 1
Buy 5 get 1
Buy 5 get 1
Buy 5 get1
(same number)
-
max
. 100
’000
rpm
opt.
80’
000
rpm
max
. 100
’000
rpm
max
. 120
’000
rpm
max
. 120
’000
rpm
max
. 160
’000
rpm
max
. 120
’000
rpm
max
. 120
’000
rpm
$99.55
L (mm)
5 pcs/box
009 009
Order No. H152FG009
$99.55
9.0 9.0H152FGL009
Size Ø ¹/10 (mm)
L (mm)
5 pcs/box
013 016
Order No. 802LFG01310.0 10.0
802LFG016
021
$39.60$39.60$39.60
10.0802LFG021
Size Ø ¹/10 (mm)
$68.75
L (mm)
3 pcs/box
014
Order No. G254FGXXL0146.0
Size Ø ¹/10 (mm)
$77.55
L (mm)
3 pcs/box
016
Order No. D254FGXXL01610.0
Size Ø ¹/10 (mm)
H152 EndoburSpecial endodontic drill with a long, conical blade configuration for producing a funnel-shaped access into the pulp chamber. The rounded, safe end drill tip prevents penetration into the root canal walls and the floor of the pulp chamber during drilling. Maximum motor speed 120,000 rpm, apply only light pressure during preparation.
EDENTA H152 CARBIDE BURS FG/FGL
EDENTA 802L DIAMOND BURS FG
EDENTA DIAMOND BURS FGXXL
EDENTA DIAMOND BURS FGXXL
H152
CONICAL SPECIALLY LONG
802L EndoburSpecial endodontic drill for reducing the pulp chamber roof and extending the access opening for successful root canal treatment. The long diamond coated instrument neck facilitates in producing a straight access to the root canal and creating a funnel-shaped access to the pulp chamber. The special diamond grit guarantees rapid and gentle removal of the tooth structure. Speed opt. 120,000 - 160,000 rpm. Apply only light pressure during preparation.
802L
LONG ROUND WITH COLLAR
G254 Surgery DiamondSurgery diamond instrument used for removal and smoothing of bone surfaces as well as separation of teeth and effectivemachining of the tooth structure in tooth osteotomy. The special design and coordinated diamond grit guarantee gentle trimmingof the bone and tooth structure with minimal heat build-up. Speed max. 100,000 rpm. Apply only light pressure during preparation.
G254SurgeryDiamond
D254 Surgery DiamondSurgery diamond instrument used for atraumatic separation of teeth and effective machining of the tooth structure duringapicectomy. The coordinated diamond grit guarantees gentle trimming of the tooth structure with minimum heat build-up. Not recommended for machining bone. Speed max. 100,000 rpm. Apply only light pressure during preparation.
D254
SurgeryDiamond
3 mm
10°
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719 9
Sundries
$99.55
L (mm)
Ø (mm)
5 pcs/pack
11.01.6
Order No. C151
max. 300’000 rpm
For a variety of procedures:-• Initial endodontic access• Sectioning of impacted molars• Separating roots• Removing a broken root stump• Cutting a tooth horizontally
STODDARD
CARBIDE BURSFGXL
$39.60
L (mm)
Ø (mm)
5 pcs/pack
10.01.4
Order No. D857
max. 300’000 rpm
STODDARD DIA DIAMOND BURS FG
STODDARD
CARBIDE BURSFGXL
$99.55
L (mm)
Ø (mm)
5 pcs/pack
9.01.6
Order No. C152
max. 300’000 rpm
STODDARD DIAMOND BURS FG
$39.60
L (mm)
Ø (mm)
5 pcs/pack
10.01.4
Order No. D802K
max. 300’000 rpm
After initial penetration, these long, tapered burs create a funnel shape for easier access in the pulp chamber. The rounded, non-cutting safe-end tip prevents penetration of the pulp chamber floor or the root canal walls
Safe ended tip diamond burs used to remove the pulp chamber roof withoutdamaging the chamber floor
The DIA-ENDO II is a combination of a round and cone shaped diamond which allows access into the pulp chamber and preparation of the chamber walls, in one operation
Buy 5 get1
Buy 5 get 1
Buy 5 get 1
Buy 5 get 1
Buy 5 get 1
Buy 5 get 1
Buy 5 get 1 Buy 5 get 1
-
Diamond coated bone cutter for bone incisions, removaland precision finishing. Also ideal for severing tooth roots.
Advantages:The combination of special shaping and diamond coating results inclose contact with bone structure, less heat development as well as abetter removal of bone chips and tooth structure.
Always cool the area properly.
Grit:green/coarse = 151 µm - ISO 534
EDENTA OSTEOTOM GSD1 DIAMOND BURS
• Tungsten carbide bone cutter C163A with A cut design foroptimum cutting capacity and precise preparation
• Atraumatic treatment provided by optimum chip removal, resultingin improved surface quality of the prepared bone material
• The high stability of the tungsten carbide bone cutter and the A cutdesign ensure optimum cutting capacity
EDENTA C163A TUNGSTEN CARBIDE HP/RALMinimally Invasive and Precise Preparation in Oral Surgery
C163A.014 HP Bone Cutter 3 pcs/box .... $115.50C163A.014 RAL Bone Cutter 3 pcs/box .. $115.50
C163A.014HP
C163A.014RA
Max. 100,000 rpmAlways use with water coolant
Order No.HP Order No. GSD1
01612.0
FG016
$89.65
01812.0
RA018FG018
$89.65
02112.0
HP021RA021FG021
$99.55
02312.0
HP023RA023
$99.55
RA Order No. GSD1FG Order No. GSD13 Diamond Burs
per box
ISO Size 1/10 mmLength (mm)
actualsize
EDENTA C254A TUNGSTEN CARBIDE FGXL/FGXXL
C254AFGXL012
C254AFGXXL012
C254A Bone CutterBone cutter used for preparing bone and tooth structure. The special A-cut blades guarantee very quiet instrument running at the highest cutting capacity with maximum conservation of the tooth structure to be prepared. The long, slimline neck provides excellent visibility during preparation. Indications: Exposing and removing impacted wisdom teeth, apicectomies, preparation of bone structure and a bone lid, separating teeth and tooth roots. Drive: Only use a micromotor and red contra-angle. Do not use in a turbine as there is the risk of injury. Speed opt. 80,000 rpm. Apply only light pressure during preparation.
opt.
80’0
00 rp
m
max
. 100
’000
rpm
$115.50
L (mm)
3 pcs/box
012 012
Order No. C254AFGXL012
$115.50
6.0 6.0
C254AFGXXL012
C254A
BONE CUTTER
Size Ø ¹/10 (mm)
Oral Surgery Burs HP5 pcs/box … $68.75
EDENTA LINDEMANN CARBIDE BURS HP/RAL/FGXL/RAXL
Length (mm)
RAL Order No.RAXL Order No.
FG Order No.3 Carbide Burs
per box
HP Order No.
C1610169.0
C161HP016C161RAL016
C161RAXL016C161FGXL016
$99.55
C1620169.0
C162HP016C162RAL016
C162RAXL016C162FGXL016
$99.55
C16602110.0
C166HP021C166RAL021
C166RAXL021
$99.55
C16702310.0
C167HP023
C167RAXL023
$99.55
ISO Size 1/10 mmNo.
actualsize
actualsize
C161 C162 C166 C167
HP length = 44 mmRAL length = 26 mmRAXL length = 34 mmFGXL = 25 mm
Shape Fissure Round
STODDARD
BURS HPTUNGSTEN CARBIDE
023 HP016 HPSize
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-71910
Surgical Burs
RAL Order No. C141RAXL Order No. C141
HP Order No. C141027
HP027RAL027
RAXL027
$68.75
031HP031
RAL031RAXL031
$68.75
035HP035
RAL035RAXL035
$77.55
040HP040
RAL040RAXL040
$94.05
050HP050
RAXL050
$99.003 Carbide Bursper box
ISO Size 1/10 mm
RAL Order No. C141ARAXL Order No. C141A
HP Order No. C141A027
HP027RAL027
RAXL027
$77.55
031HP031
RAL031RAXL031
$77.55
035HP035
RAL035RAXL035
$94.05
040HP040
RAL040
$99.00
050HP050
$115.503 Carbide Bursper box
1ISO Size /10 mm
EDENTA CARBIDE BURSHP/RAL/RAXL
actual sizeC141AC141
HP length = 44 mmRAL length = 26 mmRAXL length = 34 mm
Buy 5 get 1 (same number)
Buy 5 get1
(same number)
Buy 5 get 1 (same number)
Buy 5 get1
Buy 5 get 1
Buy 5 get 1
-
ISO Size 1/10 mm
FG Order No.1US No.
Length (mm)0050.51/4
FG005
HP005
0060.61/2
FG006RA006HP006
0070.7
HP007
0080.81
FG008RA008HP008
0090.9
HP009
0101.02
FG010RA010HP010
0121.23
FG012RA012HP012
0141.44
FG014RA014HP014
0161.65
FG016RA016HP016
0181.86
FG018RA018HP018
0212.17
FG021RA021HP021
0232.38
RA023HP023
0272.710
FG027RA027HP027
RA Order No.1HP Order No.1
0080.834
FG008
HP008
0101.035
FG010 FG014RA010HP010
0121.236
RA012HP012
0141.437
RA014HP014
ISO Size 1/10 mm
FG Order No.2 US No.
Length(mm)
RA Order No.2 HP Order No.2
1
0081.6330
FG008RA008
0091.7
RA009
0101.7331
FG010RA010
0121.8332
FG012
ISO Size 1/10 mm
FG Order No.7US No.
Length(mm)
RA Order No.7
0083.4555
HP008
0094.2556
FG009
HP009
0104.2557
FG010RA010HP010
0124.2558
FG012RA012HP012
0144.4559
RA014
ISO Size 1/10 mm
FG Order No.31US No.
Length(mm)
RA Order No.31HP Order No.31
0104.2
1557FG010
0124.2
1558FG012RA012HP012
0144.4
1559
RA014HP014
ISO Size 1/10 mm
FG Order No.31RUS No.
Length(mm)
RA Order No.31R HP Order No.31R
7 31R31
EDENTA CARBIDE BURS FG (12,16 and 30 Blades)
12 BladesOrder No.30 BladesOrder No.
US No.Length (mm)
0093.6
7901TC246FG009
TC246UFFG009
0103.6
7902TC246FG010
0123.7
7903TC246FG012
ISO Size 1/10 mm
12 BladesOrder No.30 BladesOrder No.
Length (mm)0125.4
TC246LFG012
TC246LUFFG012
ISO Size 1/10 mm
12 BladesOrder No.
30 BladesOrder No.
Length (mm)0143.5
TC390FG014
0163.5
TC390FG016TC390UF
FG016
0183.7
TC390FG018
ISO Size 1/10 mm
12 BladesOrder No.30 BladesOrder No.
Length (mm)0143.1
TC379FG014TC379UF
FG014
0183.5
TC379FG018
TC379UFFG018
0234.2
TC379FG023TC379UF
FG023
ISO Size 1/10 mm
TC246TC379TC390TC246L
8 BladesOrder No.
Length(mm)0146.0
TC134FG014
0149.0
TC135FG014
ISO Size 1/10 mm
TC134 TC135
actual size
EDENTA CARBIDE BURS FG/RA/HP2
Carbide Burs FG
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719 11
actual size
12 BladesOrder No.
US No.Length (mm)
0141.2
7004TC41
FG014
0181.6
7006TC41
FG018
0232.067008TC41
FG023
0272.457009TC41
FG027
ISO Size 1/10 mm
12 BladesOrder No.
US No.Length (mm)
0123.5
7103TC46
FG012
0143.5
7104TC46
FG014
0183.8
7106TC46
FG018
0234.6
7108TC46
FG023
ISO Size 1/10 mm
12 BladesOrder No.
Length (mm)ISO Size 1/10 mm 010
8.0TC283FG010
0128.0
TC283FG012
0148.0
TC283FG014
TC283TC46TC41
Order No.C34
0102.1
FG010
0122.1
FG012
ISO Size 1/10 mmLength (mm)
C34
Order No.C34L
0103.5
FG010
0123.5
FG012
ISO Size 1/10 mmLength (mm)
C34LEDENTA C34 TC FG
For Crown- & Bridge - Metal Separation• Optimal cutting geometry• High material reduction• Virtually vibration-free• Long term performance
User recommendationsResin Veneers can be separated directly with the C34TC Crown Cutter.Ceramic Veneers must first be removed by a suitablediamond instrument. Thereafter, the metal crown can beseparated with the C34 TC Crown Cutter.Maximum Speed : 120,000 - 160,000 rpmSpeed recommendations : Micromotor: precious metals= 100,000 µpm, Non-precious metals = 100,000 µpm,Air turbine: precious metals = 160,000 µpm, Non-precious metals = unsuitableContact pressure : 0.5 N
actual size
Single Size 6 pcs/box … $44.55
FG Carbide Burs, 5 pieces/boxSize 005-023 ... $27.50Size 025-027 ... $58.58
RA/HP Carbide Burs, 6 pieces/boxSize 005-023 ... $34.65Size 025-027 ... $58.85
8 Blades Fine Trimming Burs Trimming Burs
FG 6 pcs/box ........... $68.7512 Blades Fine FG 6 pcs/box ........... $68.7530 Blades Ultra Fine Finishing Burs FG 6 pcs/box .. $94.05
5114 Diamond Disc RAeach … $49.50Caution: Use spray
coolant when preparingMax. 20,000 rpm
To remove an all-porcelain restoration cut therestoration along the length of the axial wall tothe centre of the occlusal surface or incisal edgeusing a sinter diamond disc Order no. 5114RA.Then bend the restoration open with a suitableinstrument to make it fracture
EDENTA 5114RA DIAMOND DISC RA Removing all-porcelain restorations
actu
al s
ize
Buy 5 get 1
Buy 5 get 1
Buy 5 get 1 (same number)
Buy 5 get 1 (same number)
-
actual size
HP Order No.Length mm
each
0120.02314.0
$29.15
0220.02316.0
$29.15
0320.02316.0
$29.15
0420.02316.0
$29.15
0820.0238.0
$29.15
1720.0238.0
$29.15
5120.06012.2
$44.55
5220.06012.2
$44.55
HP Order No.Length mm
each
5320.060 5420.06012.2
$44.55 $44.55
13.9
5520.06015.9
$44.55 $44.55 $44.55 $44.55 $44.55 $44.55 $44.55 $44.55 $44.55
5620.04512.9
5720.04014.1
5820.06012.5
6120.0408.9
6320.0609.4
6420.03111.5
7020.06011.0
7220.06014.2
HP Order No.Length mm
each
0130.02314.0
$38.50
0230.02316.0
$38.50
0430.02316.0
$38.50
0730.0238.0
$38.50
0830.0238.0
$38.50
5630.04512.9
$49.50
5730.04014.1
$49.50
5730.04514.1
$49.50
HP Order No.Length mm
each
0240.02316.0
$38.50
0840.0238.0
$38.50
5740.04514.1
$49.50
HP Order No.Length mm
each
0124.02314.0
$29.15
2024.02310.5
$29.15
2124.0239.0
$29.15
5424.06013.9
$49.50
6924.04013.7
$49.50
7224.04011.5
$49.50
EDENTA BURS HP
FINECROSS-CUT
• For acrylics andprecious metals
FINECROSS-CUT
• For acrylics andprecious metals
SUPER FINECROSS-CUT
• For precious andnon-precious
metals,composite and
ceramics
DIAMOND CUTwith PRISMA
SURFACE
• For increasedsurface retention onthe metal framework(by more than 100%)
for ceramic andacrylic crown and
bridge work.
SPIRAL FINE CUT
• For preciousmetals, excellent
cuttingperformance ontitanium and NP
alloys
Size 1/10mm 023 023 023 060 040 040
Size 1/10mm 023 023 045
Size 1/10mm 023 023 023 023 023 045 040 045
Size 1/10mm
060 060
060 045 040 060 040 060 031 060 060
Size 1/10mm 023 023 023 023 023 023 060 060
12
Steel and Carbide Burs
1030.0237.0
$38.50023
ISO Size 1/10 mm
UK Size
ISO Size 1/10 mm
UK Size
-
006-
-
007-
-
0081
009-
-
0102
0123
0144
0165
0186
0217
0238
005 006 007 0081
009 0102
0123
0144
0165
0186
0217
0238
0259
02710
02911
03112
ROUND
INVERTED CONE
006-
007-
007-
0081
0081
009-
009-
0102
0102
0123
0123
0144
0144
0165
0165
0186
0186
0217
0217
0238
0238
FLAT FISSURE TAPERED FISSURE
EDENTA BURSHP or RA
actual size
Steel Burs HP or RA, 6 pcs/packFig 1-2, size 005-023............ $9.90Fig 1, size 025-031 ............. $19.80Fig 36-38, size 006-023...... $14.85
Fig. 1
Fig.2
Fig. 36 Fig.38
ISO Size 1/10 mm
UK SizeISO Size 1/10 mm
UK Size
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719
Buy 5 get 1 (same number)
Buy 5 get 1 (same number)
-
Length mm
each
14.0 17.0 8.0 8.0 7.0 5.3 8.0 4.2 8.0 3.9 3.5 2.0
Length mm
each
12.2 12.2 13.9 15.0 12.9 12.5 8.9 9.4 11.5 11.5 14.2
Length mm
each
12.2 12.2 13.9 15.0 12.9 12.5 13.9 9.4 11.5 11.5 14.2
Length mm
each
12.2 12.2 12.2 13.9 15.0 12.9 13.9 12.5
Length mm
each
12.2 12.2 12.2 13.9 15.0 12.9 13.9 12.5
Length mm
each
14.0 12.2 14.1 14.2 9.0
EDENTA CARBIDE BURS HP
For acrylicsand metals
For acrylicsand metals
For acrylicsand
preciousmetals
For bulkabrasion on
acrylics orplasters
For bulkreduction on
acrylics orplastics
For bulkabrasion on
acrylics orplasters
For bulkreduction on
acrylics orplastics
For softrelining
materials,mouth
guards orany softacrylics
actual size
BRASS BURBRUSH
actualsize
HP6pcs
FG/HPeach
FG/HPeach
Spiral10pcs
Sandpaper10pcs
Sandpaper10pcs
Size 1/10 mm 023 023 023 023 023 023 016 010 023 023 012 023
Size 1/10 mm 060 060 060 060 045 060 040 060 031 040 060
Size 1/10 mm 060 060 060 060 045 060 060 060 031 040 060
Size 1/10 mm 060 060 060 060 060 045 060 060
Size 1/10 mm 060 060 060 060 060 045 060 060
Size 1/10 mm 023 060 045 060 040
•
•
•
••
•
•
•
Grey Brown White
• Telescopic handle with brass wire bristles
HP Order No. 0110.023 0610.023 0710.023 0810.023 1010.023 1110.023 1210.016 1310.010 1710.023 1810.023 3510.012 7110.023
5210.060 5310.060 5410.060 5510.060 5610.045 5810.060 6110.040 6310.060 6410.031 7210.040 7210.060
5270.060 5370.060 5470.060 5570.060 5670.045 5870.060 5970.060 6370.060 6470.031 7270.040 7270.060
5180.060 5280.060 5380.060 5480.060 5580.060 5680.045 5485.060 5885.060
5150.060 5250.060 5350.060 5450.060 5550.060 5650.045 5455.060 5855.060
0175.023 5275.060 5775.045 7275.060 7775.040
HP Order No.
HP Order No.
HP Order No.
HP Order No.
HP Order No.
STANDARDCROSS-CUT
STANDARDCROSS-CUT
STANDARDPLAIN-CUT
COARSEPLAIN-CUT
SUPERCOARSE
PLAIN-CUT
COARSECROSS-CUT SUPERCOARSE
CROSS-CUT
COARSESTRAIGHT
BLADECROSS-CUT
Coarse Medium Fine
M01 4025 4022 4004 4013 4015
$24.75 $24.75 $24.75 $24.75 $24.75 $24.75 $24.75 $18.15 $24.75 $24.75 $24.75 $24.75
$39.60 $39.60 $39.60 $39.60 $39.60 $39.60 $39.60 $39.60 $39.60 $39.60 $39.60
$38.50 $38.50 $38.50 $38.50 $38.50 $38.50 $38.50 $38.50 $38.50 $38.50 $38.50
$39.60 $39.60 $39.60 $39.60 $39.60 $39.60 $44.55 $44.55
$44.55 $44.55 $44.55 $44.55 $44.55 $44.55 $49.50 $49.50
$38.50 $49.50 $49.50 $49.50 $44.55
Big Points HP, 6 pcs/boxSingle Grit............ $49.50Assorted Grits...... $49.50
$19.80 $11.55 $16.50 $27.50 $27.50 $24.75
actual sizeEDENTA MANDRELSAND BUR ADAPTORS HP
1110Brass Bur Brush
$27.50
SHOFU BIG POINTS HPfor acrylic polishing
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719 13
Sundries
Buy 5 get1
Buy 5 get 1
Buy 5 get 1 (same number)
-
STANDARDCOLOURS
Blue
Light Blue
Green
Yellow
White
Light Beige
Lavender
Length mmSize 1/10 mmHPHP OrdOrdeerr NoNo
18.015000676711
18.015000676722
21.007000676733
15.505500676799
20.007000677677
24.510000676744
18.011000676755
20.011000676676
Length mmSize 1/10 mmHPHP OrdOrdeerr NoNo
18.015000666611
18.015000666622
21.007000666633
15.505500666699
20.007000666677
24.510000666644
18.011000666655
20.011000666666
Length mmSize 1/10 mmHPHP OrdOrdeerr NoNo
18.015000665511
18.015000665522
21.007000665533
15.505500665599
20.007000665577
24.510000665544
18.011000665555
20.011000665566
actual sizeCoarse Grit
Medium Grit
Fine Grit
EDENTA EXA ACRYLIC POLISHING POINTS HP
Edenta EXA Acrylic Polishing Points HP6 pcs/box (same shape/grit) … $44.55
AUTOCLAVABLE PLASTIC BUR DISPENSERS
050-MIX050-FG
AUTOCLAVABLE PLASTIC BUR BLOCKS• Locks open or closed for processing• Medical grade plastic, autoclavable up to 134°C • Size: W55 mm x D12 mm x H34 mm• Colours available : Light Beige, Dark Blue and Light Blue
• Specially designed for cleaning and autoclaving of burs• Locks open or closed for processing• Medical grade plastic, autoclavable up to 135ºC• Size: 75 mm x 35 mm x 10 mm
050-FG, Bur Dispenser 12 FG .............. $16.50050-MIX Bur Dispenser 6 FG + 6 RA ... $16.50
380-FG Plastic Bur Block12 FG Holes ... $19.80
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-71914
Sundries
EDENTA BLUE ACRYLIC POLISHING HP KIT
0630Blue Acrylic
Polishing Kit ... $55.00
• Advanced surface treatment system for rapid trimming (blue), smoothing (light blue) and high-gloss polish (yellow)• New type of long-chain silicones with specific abrasive bodies which ensure controlled and rapid reduction combined with a smooth prepolish
ALUMINIUM BUR BLOCKS HP
STODDARDCLEANINGBRUSH
• Specially designed for ultrasonic cleaning and autoclaving of burs• Sturdy construction, fully autoclavable• Available colours: Silver or Blue• Size: W54 mm x D28 mm x H62 mm
037S-II Aluminium
Bur Block6 HP Holes
$27.50
BUR002 Cleaning Brush
$12.65
Buy 5 get1
Buy 5 get1
Buy 5 get1
Buy 5 get 1 Buy 5 get 1
AUTOCLAVABLE ALUMINIUM BUR BLOCKS
• Ideal for storage of dental burs• Special design for ultrasonic cleaning and autoclaving of burs• Sturdy construction, fully autoclavable up to 134C°
038-FG
040-RA
037-HP2880-FG
039-MIX
2880-MIX
2832-FG
2832-MIX
Bur Block ( Colours: Blue, Red or Yellow )040-RA 12 RA W58 mm x D25 mm x H31 mm ...................... $24.75
Bur Block (Colours: Silver or Blue)037-HP 6 HP W54 mm x D28 mm x H62 mm ........................ $27.50038-FG 15 FG W58 mm x D25 mm x H31 mm ..................... $24.75039-MIX 10 FG + 5 RA W58 mm x D25 mm x H31 mm ......... $24.752832-FG 32 FG W80 mm x D42 mm x H33 mm ................... $68.752832-MIX 16 FG + 16 RA W80 mm x D42 mm x H33 mm ..... $77.552880-FG 80 FG W100 mm x D75 mm x H33 mm ................. $88.552880-MIX 40 FG + 40 RA W100 mm x D75 mm x H33 mm ... $99.55
Buy 5 get1 (same item)
Buy 5 get 1 (same number)
-
Standard Order No.Short Shank Order No.
ISO Size 1/10 mmLength (mm)
Each
401M
0103
$4.95
401
0114
$4.95
30113010164.5
$4.95
301M
0134
$4.95
201S
0147
$6.60
2011201016
7$6.60
101S
01410
$6.60
101SR
01410
$6.60
101110101610
$6.60
101L1101L01810
$7.70
202
0215
$7.70
202S
0175
$7.70
103
0229
$7.70
301CR
0184
$7.70
202CR
0215
$7.70
201CR
0187
$7.70
101CR
01910
$7.70
103CR
02310
$7.70
206CR
0273.5
$8.25
207CR
0313.5
$8.25
201SR
0147
$6.60
201R1201R
0167
$6.60
104R1104R
01610
$6.60
101R1101R
01610
$6.60
102R
0179
$7.70
103R
0229
$7.70
105R
02211.5
$7.70
106RD
0219
$7.70
107RD
0239
$7.70
Standard Order No.Short Shank Order No.
ISO Size 1/10 mmLength (mm)
Each
304
0166
$4.95
20412040138
$6.60
104110401610
$6.60
104L
01810
$7.70
4111411011
4$4.95
411M
0103
$4.95
31113110134.5
$4.95
211
0147
$6.60
214
0125
$6.60
311RM
0134.5
$6.60
212R
0106
$6.60
213R
0128
$6.60
114S
0108
$6.60
114
0128
$6.60
316
0134
$6.60
215S
0127.5
$6.60
215
0147.5
$6.60
216
0177.5
$6.60
115
01310
$6.60
116
01510
$6.60
421M
0101
$4.95
42114210151.5
$4.95
321M
0161.4
$4.95
321
0181.7
$4.95
Standard Order No.Short Shank Order No.
ISO Size 1/10 mmLength (mm)
Each
421SS1421SS
0102.2
$4.95
421S
0143.5
$4.95
321S1321S
0163.5
$4.95
150
0355.7
$8.25
440SS
0100.9
$4.95
440S
0131.2
$4.95
44014400151.3
$4.95
34013400181.6
$4.95
461R
0092
$4.95
462R
0111.7
$4.95
319
0193.4
$7.70
364R
0154.5
$6.60
265R
0215
$7.70
144
0325
$8.25
165R
0257
$7.70
330
0250.5
$7.70
130
0500.7
$8.25
111
0451.7
$8.25
117
0325
$8.25
145
0294.9
$8.25
148
0325
$8.25
149
0394
$8.25
121
0263.6
$8.25
122
0364
$8.25
246
0334
$8.25
SHOFU DIAMOND BURS FG
Medium(115 Microns)
Medium(115 Microns)
Medium(115 Microns)
actual size
depth of cutting0.5 mm 1.0 mm
Standard Order No.Short Shank Order No.
ISO Size 1/10 mmLength (mm)
Each
SF201
0157
$6.60
SF101SF1101
01510
$6.60
SF301CR
0184
$8.25
SF202CR
0215
$8.25
SF201CR
0187
$8.25
SF101CR
01910
$8.25
SF103CR
02310
$8.25
SF206CR
0273.5
$8.25
SF207CR
0313.5
$8.25
SF104R
01510
$6.60
SF102R
0169
$6.60
SF102RD
0189
$8.25
SF106RD
0219
$8.25
SF107RD
0239
$8.25
SF204
0108
$6.60
SF215
0127.5
$6.60
SF114
0138
$6.60
SF318
0232
$7.70
SF319
0143.4
$6.60
SF416
0164
$6.60
SF217
0176
$7.70
SF219
0195
$7.70
SF150
0355.7
$8.25
SF440
0151.3
$6.60
SF265R
0205
$7.70
SF313R
0163.3
$6.60
SF145
0294.9
$8.25
F201R
0157
$6.60
F104R
01510
$6.60
F102R
0169
$6.60
F105R
02111.5
$7.70
F204
0128
$6.60
F104
01510
$6.60
F215F12150137.5
$6.60
F216
0167.5
$6.60
F440R
0070.7
$6.60
680F
0109
$7.70
682F
0129
$7.70
684F
0149
$7.70
Standard Order No.Short Shank Order No.
ISO Size 1/10 mmLength (mm)
Each
C101
01710
$7.70
C202
0225
$7.70
C102R
0189
$7.70
C104LL
02210
$7.70
C165R
0257
$7.70
C101X
01710
$7.70
C103X
02310
$7.70
C105RX
02312
$7.70
680C
0109
$7.70
682C682S012
9$7.70
684C684S014
9$7.70
Superfine(25 Microns)
Yellow
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719 15
Sundries
0955 All CeramicPreparation Set FG
$148.50
The demand for ceramics in dentistry is at an all time high. Newer ceramic materials available today produce superb ceramic restorations. This is challenging the dental professional to consider newer materials, aesthetics, function, and clinical expertise when preparing an all ceramic restoration. Under the guidance of Dr.Takao Maruyama of Osaka University,Dr. Yoshihiko Mutobe and Shofu have developed a new all ceramic preparation system utilizing ceramic diamond burs to prepare an all ceramic restoration.
SHOFU
PREPARATION KIT FG
• Designed by experts in the field of restorative dentistry to provide efficiency and accuracy during crown and bridge preparation• Speedy, simple and accurate tooth preparation can be done with 14 kinds of specially selected FG Diamond Points• Usable for a wide range of crown and bridge preparation work such as, PFM of full metal crowns and bridges, full ceramic restorations, Veneers, Inlays and Onlays• The Diamond Points are hygienically organized in an autoclavable aluminum bur block for convenient sterilization and replacement
each$148.50
SHOFU ALL
PREPARATIONSET FG
Coarse(135 Microns)
Green
TISS
UE P
ROTE
CTIV
E
END
CUTT
ING
Fine(60 Microns)
Red
TISS
UE P
ROTE
CTIV
E
END
CUTT
ING
Buy 5 get1
Buy 5 get 1
For every 5 pieces of Shofu Diamond Burs FG purchased (any mix)get one 050 Bur Dispenser (FG or MIX) (for Bur Block details, please refer to p.3)
Buy 5 get 1 (same number)
-
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-71916
The Enamel Adjustment Kit has three Dura-White stones for adjusting natural dentition and porcelain and nine Ceramisté points for intra-oral polishing.
The Porcelain Adjustment Kit has three Dura-White stones for adjusting and nine Ceramisté points for polishing at chairside.
SHOFU VENEER KIT SHOFU POLISHING KITS
0317 Kit RA .... $79.750318 Kit FG .... $79.75
SHOFU ADJUSTMENT KIT HP
0311 Kit HP ..... $59.95
This kit is designedfor finishinginterproximal andsubgingivalcomposite fillings. It has six Dura-Greeand six Dura-Whistones in CN1 andFL2 shapes.ten
• Design for adjustmentand polishing of acrylicdentures and applianceschairside or in thelaboratory.
• The kit includes 8Silicone Acrypoints and 4Robot Carbide Burs forfast, smooth adjustmentand polishing
SHOFU FINISHING KITS RA/FG
SHOFU CONTOURINGAND FINISHING KIT HP
• No metal centre, will not gouge or discolour composite• Improved mandrel design• For safe, fast polishing without changing or inverting discs
These abrasives areimpregnated withpolishing ingredientsto provide fast, brilliantresults without pumice ortin oxide. The kit includesthree each Brownie cups and mini-points, two each Greenie cups andmini-points, one each Supergreenie cup and mini-point.Cups are for proximals, Mini points for occlusals.
0310Composite Polishing
Kit RA$59.95
SHOFU POLISHING KIT RA
0329Acrylic Kit HP
$148.50
SHOFU 0505
MINI KIT RA
SHOFU POLISHING KIT HP
SHOFU AND ADJUSTMENT KITS HP
0307 Enamel Kit RA ..... $59.950301 Porcelain Kit HP .. $59.95
SHOFU POLISHING KITS RA/FG
For finishing andsuperpolishing castgold/precious alloys,this kit includes sixBrownie, threeGreenie and threeSupergreeniepolishing points inKN7, PC2 and WH6shapes.
This kit is designed for finishing and polishing alltypes of composite materials. It has two Dura-Greenand two Dura-White stones, six CompoSite points,and one each Composite Fine cup and disk.
0303 Kit HP ... $59.95
Designed for chairside adjustment of nickel-chrome or chrome-cobalt prosthesis and for polishing adjusted surfaces, this kit has ten Lab. Series White stones for adjusting and two Hardie mounted points for finishing and polishing.
Designed by Dr. George A. Freedman, this kitcontains an optimal selection of instruments to assist thepractitioner in all aspects of porcelain veneer placement:one regular-grit and two fine grit FG Robot diamond points,three T & F-grit Hybrid points, two CA Dura-White stones,six CA Ceramiste points, and two CA Ceramisté cups.
0300 Kit RA/FG … $115.50
Designed by Dr. Ronald E. Goldstein,this kit has fourteen assortedCeramisté cup and Midi-point shapesfor complete polishing.
SHOFU HYBRID DIAMOND BURS FG (in Carbide Bur Shapes) (115 microns)
Order No.Carbide Shape
09012
09034
09056
090734
090935
0911245
0913331
0915556/56
0917557/57
0919558/58
0921700/170
0923701/171
Order No.Carbide Shape
09257006
09277104
09297106
09317404
09337406
09357803
09377901
09397903
0941LT1
0943LT2
actual size
actual size
Hybrid Regular Diamond Bur FG … $4.95
Hybrid T&FSuperfine
Diamond Bur FGeach $7.70
SHOFU HYBRID DIAMOND BURS FG (in Carbide Bur Shapes) SUPERFINE (25 microns)
0308 Amalgam Polishing Kit RA ... $59.950309 Amalgam Polishing Kit FG ... $59.95
0306 Kit RA ... $59.950302 Kit FG ... $59.95
Sundries
Buy 5 get1
0505 Super SnapMini Kit RA
$59.95
Buy 5 get 1 Buy 5 get 1
Buy 5 get 1
Buy 5 get 1 Buy 5 get 1
Buy 5 get 1 Buy 5 get 1
Buy 5 get 1
Buy 5 get 1
Buy 5 get1
(same number)
-
SHOFU ® / ® ®/ SILICONE POINTS RA, FG and HPFor Amalgam and Cast Alloy. Eliminate the bother of messy pumice and tix oxide. Usethese popular silicone cups, points, disks and wheels that are impregnated with highquality polishing ingredients for fast, and brilliant finishes on amalgam,gold and castalloys. Use our Brownies to achieve a smooth surface, Greenies for lustrous polish andSupergreenies (with yellow banded shank)for superpolish.
Gold andPrecious AlloyPolishing
ShapeBrownies HP Order No.
(Initial Polishing) RA Order No.
Greenies HP Order No.(Lustrous Polishing) RA Order No.
Supergreenies HP Order No.(Super Polishing) RA Order No.
MiniBHP280403
GHP280404
404B
BulletBHP13SBRA13SGHP13SGRA13S
PC2027202820275028502780288
KN5BHP5
GHP5
KN7027102810274028402770287
WH6027302830276
0279
Floppie0458
0459
actual size actual size
Brownie / Greenie / Supergreenie12 pcs/box ... $49.50
GritsRA Order No.FG Order No.
04030413
Greenie Greenie04040414
Supergreenie Supergreenie404B414B
BrownieBrownie04010411
04020412
402A412A
AmalgamPolishing
• The elimination of expensive and messy polishing pastes• Cost-effective, long-lasting durable heads
actual size actual size
CeraMasterfor Ceramic
CompoMasterfor Composite
SHOFU CeraMaster®and CompoMaster®THE NEW
POLISHERSRA/HP
SHOFU SILICONE POINTS RA, FG AND HP
ShapeOrder No.Standard(Pre-polishing)Order No.Ultra (Polishing)Order No.Ultra II (Final Polishing)
BulletRA0251RA0254RA0257
KnifeRA0252RA0255RA0258
WheelRA0253RA0256RA0259
CupRA251ARA254ARA257A
Midi-PointRA253ARA256ARA259A
Cup
FG257B
Midi-PointFG253BFG256BFG259B
KN7HP0261HP0264HP0267
PC2HP0262HP0265HP0268
WH6HP0263HP0266HP0269
RA
FG
HPactual size
• Specific designs for polishing porcelain and composite restorations• Unique blend of silicone and diamond• A choice of shapes to suite the polishing of all surfaces
• CA and HP shanks for chairside or laboratory use• A glaze-like polish to pocelain estorations• A faster and easier method of polishing
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719 17
Bullet
0118
WH6KN7Mini-PointCupKnife
011101170116
0112 0113 01140118C
0111C0117C0119C0116C
0112C 0113C 0114CShape
Finishing Coarse(yellow band)
Finishing and polishing(yellow and white band)
RA Order No.HP Order No.RA Order No.HP Order No. 0119
Bullet
0128
WH6KN7Mini-PointCupKnife
012101270126
0122 0123 01240128C
0121C0127C0129C0126C
0122C 0123C 0124CShape
Finishing Coarse(blue band)
Finishing and polishing(blue and white band)
RA Order No.HP Order No.RA Order No.HP Order No. 0129
Diamond Bur Kits and Polishing Points
For Porcelain and Enamel. Made specifically for finishing and polishingporcelain and enamel, Ceramiste points, cups and wheels provide the best in silicone technoloy. In grit gradation, our Standard points are for finishing, Ultra points(yellow band) for polishing and Ultra ll points(white band) for superpolishing. Cups andMidi-Points come in CA and FG shanks.
SHOFU POLISHERS CA
0322 CompositeTechnique Kit CA
12 pcs/box ... $79.75
Indication: For perfect polishing of anterior and posterior composite restorations without scratching surroundingtooth structure. Final polishing can be obtained easily without ditching the restorative material.
Specification:Available in two grits and 8 different shapes as follow:CompoSite Polisher – Aluminium oxide (approx. 40 microns)CompoSite Fine Polisher – Zirconium (approx. 20 microns shank marked with colour band)
Shape
CompoSite Polisher RAAluminium oxide (40µm)CompoSite Polisher FGAluminium oxide (40µm)
CompoSite Fine Polisher RAZirconium (20µm)
CompoSite Fine Polisher FGZirconium (20µm)
Composite SiliconePoints RA/FG
12 pcs/box ... $59.95
Bullet
0191RA
0291RA
Knife
0192RA
0292RA
Wheel
0193RA
0293RA
Disk
0194RA
0294RA
Cup
0195RA
0295RA
Pear
0196RA
196BFG
0296RA
296BFG
Inverted Cone
0197RA
0297RA
Midi
0198RA
0199FG
0298RA
0299FG
actual size
CeraMaster RA Single Shape, 3 pcs/box .... $68.75CeraMaster HP Single Shape, 3 pcs/box .... $68.75CeraMaster RA Assorted, 4 pcs/box ............ $79.75(one each bullet, knife, cup and mini-point)CeraMaster HP Assorted, 4 pcs/box ............ $79.75(one each bullet, KN7, WH6 and mini-point)
CompoMaster RA Single Shape, 3 pcs/box ... $68.75CompoMaster HP Single Shape, 3 pcs/box ... $68.75CompoMaster RA Assorted, 4 pcs/box ........... $79.75(one each bullet, knife, cup and mini-point)CompoMaster HP Assorted, 4 pcs/box ........... $79.75(one each bullet, KN7, WH6 and mini-point)
Buy 5 get 1 (same item)
Buy 5 get1 (same item)
Ceramisté Points12 pcs/box .... $59.95
Buy 5 get 1
Buy 5 get 1
-
SHOFU SUPER-SNAP IntroductionThe final step in polishing, it provides a smooth surface with minimal secondary scratches for a natural enamel-like luster. A highly polished surface also prevents staining and plaque accumulation for a durable restoration with greater resistance to secondary cariesSuper-Buff is a specially designed aluminum oxide impregnated felt disk with easy to use snap-on system for superpolishing all direct resins.IndicationDeveloped to achieve a high gloss polishing of all types of direct tooth coloured restorations
Recommended Speed: Range 8,000-12,000 rpm / Max. 15,000 rpm Contact Pressure 0.8NUsage: Moisten completely before use
Benefits• Integrated polishing paste in the disk ensures faster polishing of restorations while keeping the work area clean• Disks can be soaked in water until soft and flexible to activate polishing compound just before use• Thick disk design enables super polishing of occlusal surfaces efficiently• Able to super polish multiple surfaces in a single bound without the mess of polishing pastes
Super-Snap Buff 0535 Set CA ....................... $68.75L523 25’s Disk Standard ... $33.55L524 25’s Disk Mini ........... $33.55
High gloss polish in a snap, with no messy paste … no risk of cross contamination
SHOFU SUPER-SNAP AND SUPER-SNAP SYSTEMThe new improved Super-Snap system has made an evolution to perfection. The number of polishing steps has been reduced and the range of grits has been expanded. For optimal safety in polishing, the disks do not have metal centres, and the shanks are protected for maximum safety when working interproximally. The final polishing disks are double-sided, giving you maximum convenience and performance. The redesigned mandrel holds the disks firmly to ensure a safe grip. Finishing and polishing of composite has never easier and now Super Snap Ultra-thin, colour-coded disks indicate the grit and function to take you step-by-step to the finest restorations you can achieve. In addition, colour-coded polystrips have been added to complete the evolution of the new Super Snap Technique Kit.
$126.50/kit $59.95/kit $27.50/box
50 pcs/box ... $27.50
[PN 0506] Super-Snap X-TREME Kit ... $55.00/kit50 Green / 50 Red X-TREME Standard Disks
[PN 0507] Super-SnapX-TREME Kit ... $55.00/kit50 Green / 50 Red X-TREME Mini Disks
Super-Snap Rainbow Kit[PN 0500]
[PN L511] Green X-TREME Standard Disks[PN L531] Green X-TREME Mini Disks[PN L512] Red X-TREME Standard Disks[PN L532] Red X-TREME Mini Disks
100 x Standard disks,80 x Mini disks, 40 x polystrips2 x Dura-White Stones(FL2 & CN1), Composite FineMidi-Point, 4 x CA MetalMandrels
32 x Standard disks,16 x Mini disks,Composite Fine Midi-Point,CA Metal Mandrel
Super-Snap Mini Kit [PN 0505]
100 x PolystripsBlack (Coarse) & Violet (Medium)
100 x PolystripsGreen (Fine) & Red (Superfine)
Super-Snap Polystrips
• Thin, double-sided Disks (only for fine & super fine grits) For safe, fast polishing without changing or inverting discs• Improved Mandrel Design Holds disks firmly for maximum control• No Metal Centre Will not gouge or discolour composite• New Black Coarse Disks Uniform (coarse grit) particles for fast, smooth composite contouring.
• Thin Polystrips Interproximal finishing and polishing strips. Colour coded: Black/Violet (Coarse/Medium grits) Green/Red (Fine/Superfine grits)• New Kit Design Semi-circular design for convenient access and easy identification of different grits of disks & strips.• More Disks New kit contains 180 Disks (3 times more than the previous kit)
[PN L526]
[PN L525]
Super-Snap X-TREME (extra thickness) Refills
ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-71918
Abrasives and Polishing Materials
Super-Snap X-TREME (extra thickness) Kits
Super-SnapRefills
50 pcs/box$27.50
0439Super-Snap
Mandrels6 pcs/box
$33.55
SHAPE CATEGORY Contouring
Black (coarse) Violet (medium) Green (fine) Red (super fine)
Finishing Polishing Super-Polishing
Polishing Super-Polishing
Colour/Grit
SHAPE CATEGORY
Refills (50 pcs/box) PN L506 L507 L508 L509 L528 L522 L501 L519 L502 L521
Green (fine) Red (super fine)L511 L531 L512 L532
Colour/GritRefills (50 pcs/box) PN
Super-
top related