san francisco cobblestone - basalite · front cover san francisco cobblestone paversin special...
Post on 19-May-2020
2 Views
Preview:
TRANSCRIPT
Great Hardscapes Start Here®
ALBERTA • BRITISH COLUMBIA • CALIFORNIA • COLORADO • IDAHO • NEVADA • OREGON • WASHINGTON • WYOMING
©2017 Basalite® Concrete Products, LLC. All trademarks ® are registered trademarks. BA064_NV 1800 5/17/2017
PAVERS | WALLS | OUTDOOR LIVING KITS
a division of Basalite Building Products
Front cover San Francisco Cobblestone Pavers in special order custom color and back cover in Mendocino
Find Or Follow Us On
www.basalite.com
San FranciscoCobblestone
INTERLOCKING PAVING STONES
355 Greg StreetSparks, NV 89431775-358-1200
SquareWeight: 6 lbs
Units/Pallet: 512Sq. Ft./Pallet: 107
RectangleWeight: 8 lbs
Units/Pallet: 384Sq. Ft./Pallet: 121
MegaWeight: 19 lbsUnits/Pallet: 160Sq. Ft./Pallet: 102
5.5”
60 mm
5.5”
60 mm
8.25”5.5”
11” 8.25”
60 mm
SPECIFICATIONS
San Francisco Cobblestone Pavers in Positano
Printed colors shown in this brochure may vary from actual product colors.We recommend selecting colors from actual product samples.
PATTERNSTo see additional San Francisco Cobblestone patterns please visit basalite.com.
*The installation instructions and illustrations shown are a basic overview of the paver installation methods. Because installation methods vary per product, please refer to the Basalite product specific installation guide, the Standard ICPI installation method, ICPI.org or visit www.basalite.com.
1. Excavate unsuitable, unstable or unconsolidated subgrade material and compact the area whichhas been cleared. Backfill and level with dense graded aggregate suitable for base material (typically3” - 6” for pedestrian/light vehicular traffic and 8” - 10” for driveway applications), or as otherwisedirected by site engineer/architect/landscape architect.
2. Install edge restraint using concrete curb, concrete toe or edging.
3. Place bedding course of sharp, normal-weight screening or concrete sand to a uniform depth ofapproximately 1” leveled to grade.
4. Install Basalite Pavers hand tight with joints approximately 1/8”. Where required, cut stones withan approved cutter to fit accurately.
5. Tamp pavers with mechanical vibrator, uniformly level true to grade and free of movement.
6. Fill voids in joints by sweeping dry, fine, sharp sand over pavers.
PAVER INSTALLATION*
Edge Restraint
Compacted Aggregate Base
Compacted Soil Subgrade
Joint Sand
Basalite® Paver Base
Basalite® Interlocking Paving Stones
All Purpose Sand
Random 140% Mega, 20% Rectangle, 40% Square
Interlace80% Rectangle, 20% Square
Random Cobble60% Mega, 30% Rectangle, 10% Square
Mega Pattern Two67% Mega, 30% Rectangle
For designs that require more formal styling, this paver offers
the traditional look and feel of centuries-old cobbled block.
Don’t forget to include complementary walls and stairs
to complete your hardscape.
San FranciscoCobblestoneINTERLOCKING PAVING STONES8p8
STOCK COLORSCustom colors are available by specialorder - please contact your local dealer.
Positano
Venice
Sienna
Naples
Carmel
Comstock Blend
Donner Blend
Marin
Mendocino
Pacifica
top related