save money and improve your products with 3d printing and rapid prototyping

Rapid prototyping creates full-sized models

of physical parts with three-dimensional

Computer Aided Design (CAD).

2/24/2015 Rapid Prototyping and 3D Printing 2

2/24/2015 Rapid Prototyping and 3D Printing 3

2/24/2015 Rapid Prototyping and 3D Printing 4

2/24/2015 Rapid Prototyping and 3D Printing 5

Military Component Manufacturers

Consumer Products

2/24/2015 Rapid Prototyping and 3D Printing 6

2/24/2015 Rapid Prototyping and 3D Printing 7

2/24/2015 Rapid Prototyping and 3D Printing 8

The original additive manufacturing

process, SLA uses an ultraviolet laser to

trace patterns, layer by layer, in a vat of

liquid ultraviolet resin to cure and harden.

2/24/2015 Rapid Prototyping and 3D Printing 9

Accurate and fast, SLA is still commonly

used for low volume production.

2/24/2015 Rapid Prototyping and 3D Printing 10

2/24/2015 Rapid Prototyping and 3D Printing 11

Selective Laser Sintering, or SLS, employs a

laser to melt plastic powder into 3D

models.

2/24/2015 Rapid Prototyping and 3D Printing 12

Stronger and more stable than SLA, SLS is

not as accurate as FDM or SLA components.

2/24/2015 Rapid Prototyping and 3D Printing 13

2/24/2015 Rapid Prototyping and 3D Printing 14

Fused Deposition

Modeling layers plastic

material down by

extruding melted

material through a

nozzle, controlling the

flow of material as it’s

extruded.

2/24/2015 Rapid Prototyping and 3D Printing 15

Those layers begin to harden immediately

after being extruded.

2/24/2015 Rapid Prototyping and 3D Printing 16

Highly accurate, FDM can utilize the same

materials that will be used for finished

parts, creating prototypes up to 80% as

strong as finished injection molded parts

will be.

2/24/2015 Rapid Prototyping and 3D Printing 17

2/24/2015 Rapid Prototyping and 3D Printing 18

Urethane cast parts

CNC milling

CNC machining

2/24/2015 Rapid Prototyping and 3D Printing 19

Early Supplier Involvement ensures product

designer and manufacturer are well

informed on all factors of a new design.

2/24/2015 Rapid Prototyping and 3D Printing 20

Cycle times of product (as designed)

Longevity of the design

Resources necessary to make changes

Design scenarios and usage cases

2/24/2015 Rapid Prototyping and 3D Printing 21

This reduces the risk of design errors and the

potential for delays.

PRODUCTION DELAYS $$$

2/24/2015 Rapid Prototyping and 3D Printing 22

Uneven wall

thickness

Unstable part

dimensions

Part variability

Slow cycle times

2/24/2015 Rapid Prototyping and 3D Printing 23

PROTOTYPE

Design iterations happen

FAST, decreasing overall

development time

Designs can be tested

prior to manufacturing

Using FDM, prototypes

can be produced that

are as strong as finished

products

NO PROTOTYPE

May require substantial

modifications requiring

expensive retooling if

issues are discovered

Project unknowns make

accurate estimates

difficult

2/24/2015 Rapid Prototyping and 3D Printing 24

Bundled tool

modifications, make

small changes prior

to full retooling

3D printed short-run

injection molds

Lightweighting

On-site replacement

parts

2/24/2015 Rapid Prototyping and 3D Printing 25

Rapid prototyping leads to better products

with shorter development time, saving

valuable resources and avoiding costly

delays in production.

It provides benefits to product designer,

manufacturer, and end user.

2/24/2015 Rapid Prototyping and 3D Printing 26

Visit us at www.kaso.com

Check us out on LinkedIn https://www.linkedin.com/company/kaso-plastics

2/24/2015 Rapid Prototyping and 3D Printing 27