sbm sbs jc sf tz se clutches and brakes - sinfo-t.jp · pdf fileelectromagnetic clutches and...
Post on 05-Mar-2018
215 Views
Preview:
TRANSCRIPT
DMP TYPE POWER BOX EMP TYPE CONTROLLER CSM TYPE CONTROL BOARD
DOUBLE OVEREXCITATION QUADRUPLE OVEREXCITATIONPRINTED CIRCUIT TYPE
Our clutches and brakes used in various equipment including industrial equipment, information equipment and recreation facilities play an important part in automation ormotion control systems in terms of power transmission and control.
The machines shown here are only a sampling of what is available.
ELECTROMAGNETICCLUTCHES AND BRAKES
CONSTANT VOLTAGE/CONSTANT CURRENT POWER SOURCEPS TYPE
ROLL DIAMETER PROPORTIONAL TYPEAUTOMATIC TENSION CONTROL SYSTEMPCD TYPE
MICRO DEVIATIONAUTOMATIC TENSION CONTROL SYSTEMPCF TYPE
POWER BOX AND CONTROLLER
NC SBR SBM ERS BO
ERS
JCC
SBS
AR
SBM
POB
EPR
JCC
SE
SFC
TZ
SBS
EP/EPS
JEP
JEP
NC-T
TB
SBM SBS JC SF TZ
X-ray device
Elevating unitfor stairways
MRI
Welfare vehicle
Conveyor
Crane Forklift
Automated guidedvehicle(AGV)
Labelling device
Mills
Shearing machine
Flying sheu
Press
Rolling mills
Automatic screwcutting lathe
Engine lathe
Machining centerDrilling machine
NC machine tool
Bottle filling machine
Packaging machine
Bag elaborating machine
POB
Machinerytool Steel
Metalprocessing
Wrapping/Packagingmachinery
Transport /DeliverymachineryMedical
Welfareequipment
1609B1○SE70-001CODE
Formerly
Shiba NBF Tower, 1-30, Shiba-daimon 1-chome, Minato-ku, Tokyo, 105-8564, JapanTEL +81-3-5473-1826 FAX +81-3-5473-1845
SINFONIA TECHNOLOGY CO., LTD. continually upgrades and improves its products. Actual features and specifications may therefore differ slightly from those described in this catalog.
96 Robinson Road, #13-02 SIF Building, Singapore 068899TEL +65-6223-6122 FAX +65-6225-2729
Graha Paramita 8th Floor Suite E Jl. Denpasar Raya Block D2 KAV. 8 Kuningan, Jakarta 12940, IndonesiaTEL 021-252-3606 (hunting) FAX 021-252-3608
Room3006, Building B Far East International Plaza, No 317, Xian Xia Road, Changning District, Shanghai, ChinaZip Code:200051TEL +86-21-6275-0606 FAX +86-21-3209-8975
12th Floor Room 1205, 319 Chamchuri S�uare Building, Phayathai Road, Pathumwan Bangkok 10330, ThailandTEL +66-2160-5068 FAX +66-2160-5069
http://www.sinfo-t.jp
For safe and reliable operation, it is essential to read the user,s manual carefullybefore using this equipment.
2007 4A SPrinted in Japan
Our clutches and brakes
used in various equipment including industrial equipment,
information equipment and recreation facilities play
an important part in automation or
motion control systems.
We have a new slogan in Japan; “ECOing” a combination of “eco” and “ing”. This is to promote eco-friendly technological development and manufacturing.Our ecological activities are of course not limited to Japan and practiced in many countries around the world.
This catalogue, passed E3PA standard, is printed in eco-friendly way by using FSC® paper and vegetable oil ink.
天地8mmまで縮小可能
DMP TYPE POWER BOX EMP TYPE CONTROLLER CSM TYPE CONTROL BOARD
DOUBLE OVEREXCITATION QUADRUPLE OVEREXCITATIONPRINTED CIRCUIT TYPE
Our clutches and brakes used in various equipment including industrial equipment, information equipment and recreation facilities play an important part in automation ormotion control systems in terms of power transmission and control.
The machines shown here are only a sampling of what is available.
ELECTROMAGNETICCLUTCHES AND BRAKES
CONSTANT VOLTAGE/CONSTANT CURRENT POWER SOURCEPS TYPE
ROLL DIAMETER PROPORTIONAL TYPEAUTOMATIC TENSION CONTROL SYSTEMPCD TYPE
MICRO DEVIATIONAUTOMATIC TENSION CONTROL SYSTEMPCF TYPE
POWER BOX AND CONTROLLER
NC SBR SBM ERS BO
ERS
JCC
SBS
AR
SBM
POB
EPR
JCC
SE
SFC
TZ
SBS
EP/EPS
JEP
JEP
NC-T
TB
SBM SBS JC SF TZ
X-ray device
Elevating unitfor stairways
MRI
Welfare vehicle
Conveyor
Crane Forklift
Automated guidedvehicle(AGV)
Labelling device
Mills
Shearing machine
Flying sheu
Press
Rolling mills
Automatic screwcutting lathe
Engine lathe
Machining centerDrilling machine
NC machine tool
Bottle filling machine
Packaging machine
Bag elaborating machine
POB
Machinerytool Steel
Metalprocessing
Wrapping/Packagingmachinery
Transport /DeliverymachineryMedical
Welfareequipment
BB
POC
PTB
POC
PTB
PRB-HPRB-H
HO
PMC
TB
ERS EP/EPS JCC JEP
PMC
HO
BO
MP
JC
NC-H
SBR ERS SBM TZ
TZ
Ticket vending machine
Productioninformation terminal
Label printer
Copy machine
Facsimile
Gravure printing machine
Slitter
Offset printer
Laminator
Automatic paperfolding machine
Spool supplyingdevice
Wood cutting machine
Index table
Vending machineElevator
Automatic pipewinding machine Automatic spinning
machine
Pleating
Draw false twisttexturing machine
Painting robot
Carrier robot
Welding robot
Automaticassembling machine
We are an all-around maker of electromagnetic clutches and brakes, amply meeting all kinds of requirements of its customers on a firm technological basis, allowing the development and production of superlative clutches and brakes.
Officeequipment /IT device
Robot /Assemblingmachine
Others
Textilemachinery
Paper processing/printing machinery
For Automation of All Kinds of Mechanisms Electromagnetic Clutches and Brakes
SELC&BDRY, SINGLE-PLATECLUTCHES /BRAKES
Spring drive with auto-gap device.Highly responsive and accurate in action.Distinguished in heat dissipation.Silent construction with no squeal noise.Asbestos-free facing.
SELC&B CLUTCHJC SERIESTHROUGH SHAFT TYPE
SELC&B CLUTCHJCC SERIESSPRIT SHAFT TYPE
SELC&B BRAKEJB SERIES
SELC&B UNITJEP SERIESEASILY MOUNTEDCLUTCH /BRAKE UNIT
WARNER DRY, SINGLE-PLATECLUTCHES/BRAKES
Equipped with an auto-gap device which eliminates the needfor troublesome adjustment during whole life.Extremely accurate; in response and quick permitwide torque control.Large heat-radiation capacity and can withstand exceedinglyfrequent operation and heavy use.Compact and easy to install; long life ensured by theirunique construction and materials.Easy to use and easy to instaII; can be readily mountedon the machine.No need for combination design, machining or centering.Wide variety of compound product series which combine motor,reduction gear, speed change gear, etc. into single units.
WARNER CLUTCHSFC SERIESBUFF SHAFT TYPE
WARNER CLUTCHSF SERIESTHROUGH SHAFT TYPE
WARNER BRAKEPB/RF SERIESFRICTION DISC UNTITEDWITH FIELD
ARM-BRAKEAR SERIESSHAFT MOUNTED BRAKEWITH HOLDING ARM
ELECTRO-SHEAVEES SERIESSHAFT MOUNTED CLUTCHWITH PULLEY
ELECTRO-PACKEP SERIESEASILY MOUNTEDCLUTCH/BRAKE UNIT
CLUTCH-COUPLERCLC SERIESEASILY MOUNTEDCLUTCH UNIT
REVER-PACKRP SERIESNORMAL AND REVERSALDRIVE UNIT WITHBEVEL GEARS
CYCLO-PACKCHHCM SERIESMOTORIZED CLUTCH/BRAKEUNIT WITH CYCROREDUCER
PAN-CAKE TYPEDRY, SINGLE-PLATE CLUTCHES/BRAKES
Very slim type with reduced width.Leaf-spring drive type with quick response and no back-lash.Outstanding durability ensured by a unique clover-shape leaf spring.Easy to install;a variety of convenient multifunction units available.
PAN-CAKE TYPECLUTCHNC SERIES
PAN-CAKE TYPEBRAKENB SERIES
ENGINEDRY, SINGLE-PLATE CLUTCHES/BRAKES
Feature a leaf-spring construction especially developed for engines.Strong against impact loads and vibrations, outstandingin durability and reliability.So compact that little installation space is needed.Coil rest type which requires minimal maintenance and inspection.
ENGINE CLUTCHSF SERIES
MICRODRY, SINGLE-PLATE CLUTCHES/BRAKES
Smallest of all dry, single-disk clutches.Quick in response and extremely accurate;no drag torque.Need no adjustment and maintain stable characteristics for a long time.Feature most suitable for highly frequent operation.
MICRO CLUTCHBO SERIES
MICRO BLAKEBB SERIES
MINI PACKMP SERIESMICRO CLUTCH/BRAKE UNIT
FAIL-SAFE BRAKES/HOLDING BRAKESNon-exciting electromagnetic brakes.ERS series features permanent magnet;SBR is spring-activated.ERS are dry, single-face brakes;SBR are dry, dual-plate brakes.Most suitable as emergency brakes, safety brakes,or holding brakes for motors and robots.
FAIL SAFE BRAKEERS SERIES
SER-PACKEPR SERIESCLUTCH(SFC)/BRAKE(ERS)UNIT
HOLDING BRAKESBR SERIES
DRY TYPE, MULTIPLE-DISCLARGE SIZECLUTCHSE SERIESNON-EXCITING DRIVE TYPEROTATING COIL TYPE
DRY TYPE,MULTIPLE-DISCBRAKESBS SERIESSPRING ENGAGED TYPE
TOOTHED CLUTCHESToothed clutches/brakes small in size yetcapable of transmitting great torque reliably.No drag torque;no drag or heat generationeven under light load.Trapezoidal tooth profile ensures smoothcoupling and outstanding ON /OFFcharacteristics.Single-position type which simplifies couplingat a fixed position.
TOOTHEDCLUTCHTO SERIESSTATIONARY COIL TYPE
TOOTHEDCLUTCHTR SERIESROTATING COIL TYPE
SINGLE-POSITIONCLUTCHSPO SERIESSTATIONARY COIL TYPE
SINGLE-POSITIONCLUTCHTZ SERIESBALL BEARINGATTACHMENT TYPE
SINGLE-POSITIONCLUTCHSTZ SERIESBALL BEARINGATTACHMENT TYPE
HYSTERESISCLUTCHES/BRAKES
Constant in torque regardless ofthe number of slip speed.No shock when coupling; outstandingin torque repeatability.
HYSTERESISCLUTCHHO SERIESSTATIONARY COIL TYPE
HYSTERESISBRAKEHB SERIES
PARTICLECLUTCHES/BRAKES
Permit wide-range, high-accuracy torquecontrol through current control.Outstanding in response and highest in constant-torque characteristic regardless of slip speed.Available in continuous slip operation and mostsuitable for highly frequent operation.Long life because of their excellent durability.No shock when coupling or braking;outstanding in torque repeatability.
PARTICLE CLUTCHPOC SERIESNATURAL COOLINGWITH SHAFT
PARTICLE CLUTCHPHC-R SERIESSELF-VENTILATIONWITH HOLLOW SHAFT
MICRO TYPEPARTICLE CLUTCHPMC SERIESSTATIONARY COIL
PARTICLE BRAKEPOB SERIESNATURAL COOLINGWITH SHAFT
PARTICLE BRAKEPHB SERIESNATURAL COOLINGWITH HOLLOW SHAFT
PARTICLE BRAKEPRB-H SERIESNATURAL COOLING BRAKE(WITH SIDE FIN)
TENSION BRAKESIncorporate a friction disk and an armaturefor slip service.Feature great durability and fully withstandcontinuous slip service.Permit wide-range torque control, and hencehighly accurate control.Various types of control systems available sothat outstanding tension control systemscan be designed.
TENSION BRAKETB SERIESPIN DRAIVE TYPEOPTIMUM FORWINDING BRAKE
DRY TYPEMULTIPLE-DISCCLUTCHES/BRAKES
Small in size, yet large in torque capacity.Most suitable for cases where clutch/brakeinstallation space is limlited.Most suitable for cases where clutch /brakedimensions are limited.
Rated Torque: 6~400Nm
Rated Torque:1250~16600Nm
Rated Torque: 6~400Nm
SELC&B UNITWITH MOTORJEM SERIES
Rated Torque: 6~50Nm
Rated Torque:7~1800Nm
Rated Torque:7~1800Nm Rated Torque:
7~1800Nm
Rated Torque:7~180Nm
Rated Torque:70~650Nm
Rated Torque:3~200Nm
Rated Torque:130~3000Nm
Rated Torque:3~200Nm
Rated Torque:7~1800Nm
Rated Torque:15~1500Nm
DRY TYPE,MULTIPLE-DISCBRAKESBM SERIESSPRING ENGAGED TYPE
Rated Torque:2~37Nm
Rated Torque:20~800Nm
Rated Torque:20~50000Nm
Rated Torque:63~400Nm
Rated Torque:63~1600Nm
Rated Torque:0.06~1Nm
Rated Torque:0.06~1Nm
Rated Torque:3~800Nm
Rated Torque:6~200Nm
Rated Torque:1~4Nm
Rated Torque:3~800Nm
Rated Torque:6~200Nm
Rated Torque:12~200Nm
Rated Torque:3~380Nm
PARTICLE BRAKEPTB SERIESHEAT PIPE COOLING TYPE
Rated Torque:25~200Nm
Rated Torque:20~800Nm
Rated Torque:0.25~15Nm
Rated Torque:0.25~15Nm Rated Torque:
0.5~15Nm
Rated Torque:2~350Nm Rated Torque:
7~650Nm
Rated Torque:0.3~53Nm
Rated Torque:7~1800Nm Rated Torque:
7~28NmMotor Capacity:
0.2~7.5kW
Rated Torque: 6~400Nm
Rated Torque: 6~400Nm
MICRO TYPEPARTICLE BRAKEPMB SERIESSTATIONARY COIL
Rated Torque:0.5~2Nm
BB
POC
PTB
POC
PTB
PRB-HPRB-H
HO
PMC
TB
ERS EP/EPS JCC JEP
PMC
HO
BO
MP
JC
NC-H
SBR ERS SBM TZ
TZ
Ticket vending machine
Productioninformation terminal
Label printer
Copy machine
Facsimile
Gravure printing machine
Slitter
Offset printer
Laminator
Automatic paperfolding machine
Spool supplyingdevice
Wood cutting machine
Index table
Vending machineElevator
Automatic pipewinding machine Automatic spinning
machine
Pleating
Draw false twisttexturing machine
Painting robot
Carrier robot
Welding robot
Automaticassembling machine
We are an all-around maker of electromagnetic clutches and brakes, amply meeting all kinds of requirements of its customers on a firm technological basis, allowing the development and production of superlative clutches and brakes.
Officeequipment /IT device
Robot /Assemblingmachine
Others
Textilemachinery
Paper processing/printing machinery
For Automation of All Kinds of Mechanisms Electromagnetic Clutches and Brakes
SELC&BDRY, SINGLE-PLATECLUTCHES /BRAKES
Spring drive with auto-gap device.Highly responsive and accurate in action.Distinguished in heat dissipation.Silent construction with no squeal noise.Asbestos-free facing.
SELC&B CLUTCHJC SERIESTHROUGH SHAFT TYPE
SELC&B CLUTCHJCC SERIESSPRIT SHAFT TYPE
SELC&B BRAKEJB SERIES
SELC&B UNITJEP SERIESEASILY MOUNTEDCLUTCH /BRAKE UNIT
WARNER DRY, SINGLE-PLATECLUTCHES/BRAKES
Equipped with an auto-gap device which eliminates the needfor troublesome adjustment during whole life.Extremely accurate; in response and quick permitwide torque control.Large heat-radiation capacity and can withstand exceedinglyfrequent operation and heavy use.Compact and easy to install; long life ensured by theirunique construction and materials.Easy to use and easy to instaII; can be readily mountedon the machine.No need for combination design, machining or centering.Wide variety of compound product series which combine motor,reduction gear, speed change gear, etc. into single units.
WARNER CLUTCHSFC SERIESBUFF SHAFT TYPE
WARNER CLUTCHSF SERIESTHROUGH SHAFT TYPE
WARNER BRAKEPB/RF SERIESFRICTION DISC UNTITEDWITH FIELD
ARM-BRAKEAR SERIESSHAFT MOUNTED BRAKEWITH HOLDING ARM
ELECTRO-SHEAVEES SERIESSHAFT MOUNTED CLUTCHWITH PULLEY
ELECTRO-PACKEP SERIESEASILY MOUNTEDCLUTCH/BRAKE UNIT
CLUTCH-COUPLERCLC SERIESEASILY MOUNTEDCLUTCH UNIT
REVER-PACKRP SERIESNORMAL AND REVERSALDRIVE UNIT WITHBEVEL GEARS
CYCLO-PACKCHHCM SERIESMOTORIZED CLUTCH/BRAKEUNIT WITH CYCROREDUCER
PAN-CAKE TYPEDRY, SINGLE-PLATE CLUTCHES/BRAKES
Very slim type with reduced width.Leaf-spring drive type with quick response and no back-lash.Outstanding durability ensured by a unique clover-shape leaf spring.Easy to install;a variety of convenient multifunction units available.
PAN-CAKE TYPECLUTCHNC SERIES
PAN-CAKE TYPEBRAKENB SERIES
ENGINEDRY, SINGLE-PLATE CLUTCHES/BRAKES
Feature a leaf-spring construction especially developed for engines.Strong against impact loads and vibrations, outstandingin durability and reliability.So compact that little installation space is needed.Coil rest type which requires minimal maintenance and inspection.
ENGINE CLUTCHSF SERIES
MICRODRY, SINGLE-PLATE CLUTCHES/BRAKES
Smallest of all dry, single-disk clutches.Quick in response and extremely accurate;no drag torque.Need no adjustment and maintain stable characteristics for a long time.Feature most suitable for highly frequent operation.
MICRO CLUTCHBO SERIES
MICRO BLAKEBB SERIES
MINI PACKMP SERIESMICRO CLUTCH/BRAKE UNIT
FAIL-SAFE BRAKES/HOLDING BRAKESNon-exciting electromagnetic brakes.ERS series features permanent magnet;SBR is spring-activated.ERS are dry, single-face brakes;SBR are dry, dual-plate brakes.Most suitable as emergency brakes, safety brakes,or holding brakes for motors and robots.
FAIL SAFE BRAKEERS SERIES
SER-PACKEPR SERIESCLUTCH(SFC)/BRAKE(ERS)UNIT
HOLDING BRAKESBR SERIES
DRY TYPE, MULTIPLE-DISCLARGE SIZECLUTCHSE SERIESNON-EXCITING DRIVE TYPEROTATING COIL TYPE
DRY TYPE,MULTIPLE-DISCBRAKESBS SERIESSPRING ENGAGED TYPE
TOOTHED CLUTCHESToothed clutches/brakes small in size yetcapable of transmitting great torque reliably.No drag torque;no drag or heat generationeven under light load.Trapezoidal tooth profile ensures smoothcoupling and outstanding ON /OFFcharacteristics.Single-position type which simplifies couplingat a fixed position.
TOOTHEDCLUTCHTO SERIESSTATIONARY COIL TYPE
TOOTHEDCLUTCHTR SERIESROTATING COIL TYPE
SINGLE-POSITIONCLUTCHSPO SERIESSTATIONARY COIL TYPE
SINGLE-POSITIONCLUTCHTZ SERIESBALL BEARINGATTACHMENT TYPE
SINGLE-POSITIONCLUTCHSTZ SERIESBALL BEARINGATTACHMENT TYPE
HYSTERESISCLUTCHES/BRAKES
Constant in torque regardless ofthe number of slip speed.No shock when coupling; outstandingin torque repeatability.
HYSTERESISCLUTCHHO SERIESSTATIONARY COIL TYPE
HYSTERESISBRAKEHB SERIES
PARTICLECLUTCHES/BRAKES
Permit wide-range, high-accuracy torquecontrol through current control.Outstanding in response and highest in constant-torque characteristic regardless of slip speed.Available in continuous slip operation and mostsuitable for highly frequent operation.Long life because of their excellent durability.No shock when coupling or braking;outstanding in torque repeatability.
PARTICLE CLUTCHPOC SERIESNATURAL COOLINGWITH SHAFT
PARTICLE CLUTCHPHC-R SERIESSELF-VENTILATIONWITH HOLLOW SHAFT
MICRO TYPEPARTICLE CLUTCHPMC SERIESSTATIONARY COIL
PARTICLE BRAKEPOB SERIESNATURAL COOLINGWITH SHAFT
PARTICLE BRAKEPHB SERIESNATURAL COOLINGWITH HOLLOW SHAFT
PARTICLE BRAKEPRB-H SERIESNATURAL COOLING BRAKE(WITH SIDE FIN)
TENSION BRAKESIncorporate a friction disk and an armaturefor slip service.Feature great durability and fully withstandcontinuous slip service.Permit wide-range torque control, and hencehighly accurate control.Various types of control systems available sothat outstanding tension control systemscan be designed.
TENSION BRAKETB SERIESPIN DRAIVE TYPEOPTIMUM FORWINDING BRAKE
DRY TYPEMULTIPLE-DISCCLUTCHES/BRAKES
Small in size, yet large in torque capacity.Most suitable for cases where clutch/brakeinstallation space is limlited.Most suitable for cases where clutch /brakedimensions are limited.
Rated Torque: 6~400Nm
Rated Torque:1250~16600Nm
Rated Torque: 6~400Nm
SELC&B UNITWITH MOTORJEM SERIES
Rated Torque: 6~50Nm
Rated Torque:7~1800Nm
Rated Torque:7~1800Nm Rated Torque:
7~1800Nm
Rated Torque:7~180Nm
Rated Torque:70~650Nm
Rated Torque:3~200Nm
Rated Torque:130~3000Nm
Rated Torque:3~200Nm
Rated Torque:7~1800Nm
Rated Torque:15~1500Nm
DRY TYPE,MULTIPLE-DISCBRAKESBM SERIESSPRING ENGAGED TYPE
Rated Torque:2~37Nm
Rated Torque:20~800Nm
Rated Torque:20~50000Nm
Rated Torque:63~400Nm
Rated Torque:63~1600Nm
Rated Torque:0.06~1Nm
Rated Torque:0.06~1Nm
Rated Torque:3~800Nm
Rated Torque:6~200Nm
Rated Torque:1~4Nm
Rated Torque:3~800Nm
Rated Torque:6~200Nm
Rated Torque:12~200Nm
Rated Torque:3~380Nm
PARTICLE BRAKEPTB SERIESHEAT PIPE COOLING TYPE
Rated Torque:25~200Nm
Rated Torque:20~800Nm
Rated Torque:0.25~15Nm
Rated Torque:0.25~15Nm Rated Torque:
0.5~15Nm
Rated Torque:2~350Nm Rated Torque:
7~650Nm
Rated Torque:0.3~53Nm
Rated Torque:7~1800Nm Rated Torque:
7~28NmMotor Capacity:
0.2~7.5kW
Rated Torque: 6~400Nm
Rated Torque: 6~400Nm
MICRO TYPEPARTICLE BRAKEPMB SERIESSTATIONARY COIL
Rated Torque:0.5~2Nm
top related