semi-automatic valve applicator menu
Post on 26-Aug-2014
289 Views
Preview:
DESCRIPTION
TRANSCRIPT
Semi-automatic valve applicator Description
Use process:
1 Assemble the machine
First of all,Don’t connect the power supply and the air compressor.
2.Tighten the Peumatic Valve
Peumatic valve
3.Connect The trachea like this.
4.You need to check the balance of The Die-Head and the Base.
The Die-Head and the Base need to Anastomosis.
Base
Die-Head
If not exactly match,please push this lever
And then adjust this Machine Part.
Keep it balance and exactly match
5.socket on the poor,
Adjust this four srews until the die-head and the base exactly match.
图:6. turn on the power switch, adjust the temperature table ,the company have adjust the temperature and the seconds.
If you use the Aluminum Foil bag,the thickness is 10C,the temperature you need to adjust it for 205-210 ,and the ℃second is 0.75s-1s.
If you use the Craft paper coffee bag,the thickness is 10C,the temperature you need to adjust higher than 220 ,and the second set up to 1-1.5s.℃
regulation of temperature table
Euro socket
Constant temperature table
Real-time temperature
Preset temperature--u must adjust to208℃
Process
U must adjust it 1seconds.
(2)This button can help u easy to adjust the temperature u can change the position of the number.
(3)Set down key
7.Air table (out of the box, adjust) and solenoid valves
The power switch
Process
Peumatic Meter
Peumatic valve
8.Heating rings
9. foot switch, step on down, the pressure valve pressure
valve, walks,
Heating rings
Foot switch
Peumatic Cylinder
This Pipeline connect to the air compressor and this machine u must buy it yourself.
top related