slotted keys shot counters for mold · 2019-02-26 · 1215 1216 mold accessories slotted keys shot...

1215 1216

Mold Accessories

SLOTTED KEYS SHOT COUNTERS FOR MOLD

Type R

KED KES KEG S45C

KEDS KESS KEGS SUS316

Bh9

Bh9

Bh9

H

L L L

1.6

1.6 25 25

6.3

C

6.3

H

6.3

6.3

H

6.3

6.3

B/2 B/2

KEDKEDS (Stainless steel)

KESKESS (Stainless steel)

KEGKEGS (Stainless steel)

JIS B1301－1996V Tensile strength: 600N/mm2 or more

Part Number L

H

ToleranceC

Type Bh9

KEDKEDS (Stainless steel)

KESKESS (Stainless steel)

KEGKEGS (Stainless steel)

2 0－0.025

10 15 20 2 0－0.025 0.16～0.253 10 15 20 25 30 3

40－0.030

10 12 15 16 18 20 25 30 35 40 45 50 40－0.0305 10 12 15 16 18 20 25 30 35 40 45 50 5

0.25～0.406 10 12 15 16 18 20 25 30 35 40 45 50 55 60 6

70－0.036

15 20 25 30 35 40 45 50 55 60 7

0－0.036

8 15 16 18 20 25 30 35 40 45 50 55 60 70 80

0－0.090

10 15 18 20 25 30 35 40 45 50 55 60 70 80 8

0.40～0.60

12

0－0.043

20 25 30 35 40 45 50 55 60 70 80

14 30 35 40 45 50 55 60 70 80 90 9

15 30 35 40 45 50 55 60 70 80 9010

16 40 45 50 55 60 70 80 90 100

18 40 45 50 55 60 70 80 90 100 110 11 0－0.110

L Tolerance

10 0－0.15

12 15 16 18 0－0.18

20 25 30 0－0.21

35 40 45 50 0－0.25

55 60 70 80 0－0.30

90 100 110 0－0.35

Part Number － L

KED6 － 30

Part Number － LM－CVPLM－CVEXM－CVR － 64.2

Part Number － L(C)

KED6 － LC28

Alteration Code Spec. 1Code

Full length

alteration

LC

LC

L dimension can be designated in 1mm increments.

B LC range B LC range2 5～20 10 15～ 803 6～30 12 20～ 804 8～50 14 25～ 905 8～50 15 25～ 906 10～60 16 35～1007 15～60 18 35～1108 15～80

①Shot Counter

②Actuation Block

ID Plates for tool identification

V Manufactured by PROGRESSIVE Corporation. Counter View is a trademark of PROGRESSIVE Corporation. PAT. PEND.

9 9 9 9 9 8 0NP65080

L±0.1

5

6

PROGRESSIVE

Actuator Rod

Counter Pin

No.8－32UNCInch screw

Serial number

NP65080

26 12.7

20 6.35

47.5

24

4.5

38 28 38 28

26

18

PROGRESSIVE

1 Shot Counter

Serial number

Counter Pin 2 Actuation BlockM－CVPL (Parting line mount type) only ①M－CVEX (External mount type) ①＋②

M－CVR (Round type)

V ID Plate design is subject to change without prior notice.

① R Glass-filled nylon housingP Socket Head Cap Screws M4－25 (2 pieces)

ID Plates for tool identificationMaximum operating temperature 120℃

R Glass-filled nylon housingMaximum operating temperature 120℃

R S45CP Actuator RodS Electroless nickel plated

① R SteelP Socket Head Cap Screws M4－25 (2 pieces)

M－CVR1. Bore the holes for the counter and actuator rod to the dimensions shown in the figure

below, from the rear of the movable mold plate.2. Slot an opening for the display panel of the counter to the dimensions shown in the

figure below.3. Ensure that the actuator rod protrudes 4.0mm above the parting line and decide L

dimension depending on the mold plate thickness.4. Screw the actuator rod into the plunger and insert the counter from the rear of the mold plate.5.Retain the bottom of the counter with the support plate.

■Mounting dimensions and methodM－CVPL (Parting line mount type) M－CVEX (External mount type)

NP65080

38＋

0.3

＋0.

1

28

R8

PROGRESSIVE

*48 26＋0.2

0

24

Movable mold plate

(Movable mold plate side chart)

P.L. Mold Closed

ActuationBlock

Fixed mold plate

Movable mold plateShot Counter

φ22

.25＋

0.12

0

4±0.25 12.5±0.12

φ7

0 0 0 0 0 0 0NP65080 19.

050

－0.0

2

max.R0.75

PROGRESSIVE

46.75

T

＋0.120

41.25＋0.25

0

max.R0.75

Movable mold plateSupport plate (Movable mold plate side chart)

Actuator Rod

Plate thickness

V Installation dimension shown in above figure is just for reference purpose.V Stroke distance of the counter pin for counting function is set at 3.75mm or more.

If the stroke is less than 3.75mm, the counter will not work.Conversely, when the stroke exceeds 4.25mm, the counter may be damaged.

Part Number U/Price1～9

M－CVPL(only ①)

Part Number U/Price1～9

M－CVEX(①＋②)

Part Number

L0.1mm increments

U/Price1～9

M－CVR 60.0～124.0

■Method of specifying the L dimension

L＝Movable mold plate thickness T＋actuator rod protrusion of 4.0mmV Specify taking into account the tolerance of the mold plate thickness T.V The protruding part of the actuator rod is the stroke of the actuator

rod. If the stroke is less than 3.75mm, the counter will not work. Conversely, if the stroke exceeds 4.25mm, the counter may be damaged when the mold closes.

■Features・Counting is actuated mechanically, no miscount will occur if counter is installed correctly.・ Each counter has a different serial number that will be used to identify the counter with the mold. V Counters are sold in random order.・ ID Plate for tool identification is included for M-CVPL and M-CVEX only. Apply the adhesive seal at the back of the ID Plate to the front of the counter.

■NotesV The Counter is non-resettable mechanical.V For mold testing purposes, the 7-digit indicator does not start from 0(a value of 9999980 will be shown).V M－CVR Counter: Ensure that the actuator rod has a stroke of 4.0mm±0.25.

M－CVPL, M－CVEX:CounterView™ Shot Counter is a registered trademark of Progressive Components International Corporation, covered by US Patent No.5,571,539, Canadian Patent No. 2,166,237, European Patent No. EP726129 and Others pending.

M－CVR:CounterView™ Shot Counter is a registered trademark of Progressive Components International Corporation, covered by US Patent No.5,571,539, Canadian Patent No. 2,166,237, European Patent No. EP726129, S.African Patent No. 2005/5337 and Asia and others pending.

QuotationQuotation

QuotationQuotation

QuotationQuotation

QuotationQuotationQuotationQuotationQuotationQuotation

Quo

tati

on

Quo

tati

on

V Non JIS material definition is listed on P.1351 - 1352

QuotationQuotation

QuotationQuotation