sonora 4spi-20 polarity locker power inserter - 20 volts
Post on 28-Oct-2014
86 Views
Preview:
DESCRIPTION
TRANSCRIPT
S I T U A T I O N
F E A T U R E S
D E S C R I P T I O N
A P P L I C AT I O N N O T E S
SS I T U A T I O N
FF E A T U R E S
D E S C R I P T I O N
AA P P L I C AT I O N N O T E S
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com info@sonoradesign.com
Revised Mar 15 2012
DBS devices require DC voltages on the coax input
or output connector and the RF signals must pass
through the power inserter.
Sonora power inserters couple regulated DC voltage
on coax cables while allowing the DBS signal to
pass through the inserter. DC Power originates from
switching, short circuit protected transformers.
DBS devices operate at a range of voltages and
currents. Power inserters and a power adaptors are
sold separately or packaged together. DC can be
inserted in one direction (HRFPI) or both directions
(HRFPIB) on the coax.
• DBS compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . DBS Ka/Ku
• Frequency Response . . . . . . . . . . . . . . . 2 MHz to 2400 MHz
• Indoor/Outdoor Case: . . . . . . . . . . . . . . Die cast RF shielded
• Switching Power Supply: . . . . . . . . short circuit protected . . . . . . . . . . . . . . . . . . . . . . . . . . . Regulated Output Voltage
Power inserters couple DC power on coax cables to
DBS LNBs, line amplifi ers and switches.
HRFPI ................................................................... 2 -2400 MHz ..........................(1) “Polarity” single direction inserter
HRFPIB................................................................. 2 -2400 MHz ..............................(1) “Polarity” bidirectional inserter
4SPI ..................................................................... 2 -2400 MHz ......................(4) “Polarity” single directional inserter
PS2x8 ...................................................................... DC Splitter .............................. (2) “F” DC INPUTS to (8) “F” DC OUT
PS12250 .......................................................... 12 V, 0.25 Amp .........switching regulated “F” connector transformer
PS121000A ........................................................12 V, 1.0 Amp ........switching regulated “F” connector transformer
PS201200 ...........................................................20 V, 1.2 Amp .........switching regulated “F” connector transformer
PS242000A ........................................................24 V, 2.0 Amp .............switching regulated “F”, AC cord transformer
4SPI-20 ...............................................................20 V, 1.2 Amp .............................................& 4SPI (4) polarity inserter
HRPIR20 .............................................................20 V, 1.2 Amp ..................................& HRFPI single direction inserter
HRPIR242 ...........................................................24 V, 2.0 Amp ..................................& HRFPI single direction inserter
HRPIR242B .........................................................24 V, 2.0 Amp .................................... & HRFPIB bidirectional inserter
PS8-242000 ................................................. (1) 24 V, 2.0 Amp ......................................................... & PS2x8 DC splitter
PS8-244000 .................................(2) 24 V, 2.0 Amp Supplies ......................................................... & PS2x8 DC splitter
SOLUTION
RELATED CONSIDERATIONS
4SPI
HRFPIHRFPIB
POWER SUPPLIESC
OA
X D
C IN
SE
RT
ER
S
PS2x8
PS201200
PS242000A
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com info@sonoradesign.com
Revised Mar 15 2012
2POWER SUPPLIESL
NB
PO
WE
RIN
G
SINGLE LNB POWERING
PS20
1200HRF
PI
16 V Min
95 A stacked polarity LNB or
even polarity LNB requires
a minimum of 16 volts at
its input. Model HRFPIR20p owe r ins e r te r s in clu d e
model HRFPI and model
PS201200 power supply.
LNB current is typically less
than 200 mA. Using solid
copper RG-6 coax with a loop
resistance of 4 ohms per 100,
the maximum cable length
can be calculated.
(20 V - 16 V) / (4 ohms x 0.2
Amp) = 500 feet.
Model SL5 LNBs employ current management to
minimize the current carried per coax. (500 mA total)
18 V = 200 mA, 18V 22kHz = 200 mA, 13V = 50 mA, 13V
22kHz = 50 mA.
SL5 POWERING
24 Vdc 2 Amp
18 Vdc, 0.2A 16 Vdc Minimum
16 Vdc Minimum
(4) coax to SL5
SWM8 Powering of SL5
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
SWM8
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
24V2A HRPIR
242B
18 Vdc, 0.2A
13 Vdc, 50mA
13 Vdc, 50mA
10199
SL5103
110 119
200 ft Max
Starting at 18v, the max Switch to LNB distance is 200ft.
Increasing the voltage to 20 volts allows the dish to be
up to 400 feet from the LNB (includes the in-line current
to power the LA144a amplifi ers)
4SPIS1 S2 S3 S4
Model 4SPI-20 power inserter can power (4) LNBs.
MULTIPLE LNB POWERING
OUTPUTVDC DiSEqC INPUT
INPUTVDC DiSEqC OUT
VDC AMP & LNB
Slope Compensated28 dB Gain 175 to 2400 MHz
LA281a1 DBS AMPLIFIERLLA281a DBS AMPLIFIER
VDC AMP & LNB
12 to 20 VDCAMP
12 to 20 VDCAMP
5V
SEQ
95
100 feet RG-6
AC Power may not be available at the location of
the amplifi er.
Power may be inserted
on the output coax
using model HRFPIto send power to the
amplifi er and through
to the LNB.
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com info@sonoradesign.com
Revised Mar 15 2012
3COAX POWER SUPPLY
Parameter UNIT PS12250
Rated Input Voltage Vac 100 to 240
Operating Input Range Vac 90 to 264
Rated Input Frequency Hz 47 to 63
Rated Input Current A 0.15 max
No Load Input Current mA < 15
Maximum Input Power W 5.01
AC Input Connector Type US PIN
Nominal DC Output Voltage Vdc 12
Rated load current A 0.25 max
Minimum load current A 0.0 A
Ripple & Noise mVp-p 100
DC Output Cable Feet 1
Switching Effi ciency % 59
DC Power Connector Type Each (1) F Female
DC Adaptor included Each (1) F71 Male to Male
Short Circuit Protection Yes, Multi fuse
Dimensions L x W x H mm 56 x 35 x 24
Environmental Requirements Indoor use only
Ambient Temperature range ºC 0 to + 45
Humidity Shall survive 90% relative humidity
over operating temperature
Safety Ratings Agencies USA
Canada
Europe
Japan
Taiwan
China
Britain
UL60950
CSA C22.2 NO.950
TUV/VDE-EN60950
J60950(H14)/J55001(H14)
CNS13438
GB4943-2001
EN60950-1:2000
PS12250 12 V DC Power Supply
• 0.25 Amp
• UL Approved
• Small Footprint
• F-Connector for DC Output
• Overload Protection
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com info@sonoradesign.com
Revised Mar 15 2012
4COAX POWER SUPPLY
Parameter UNIT PS121000A
Rated Input Voltage Vac 100 to 240
Operating Input Range Vac 90 to 264
Rated Input Frequency Hz 47 to 63
Rated Input Current A 0.4 max
No Load Input Current mA < 20
Maximum Input Power W 16.58
AC Input Cable Feet 6
AC Input connector Mini 2 pin
Nominal DC Output Voltage Vdc 12
Rated load current A 1 max
Minimum load current A 0.05A
Ripple & Noise mVp-p 120
DC Output Cable Feet 6
Switching Effi ciency % 72
DC Power Connector Type Each (1) F Female
DC Adaptor included Each (1) F71 Male to Male
Short Circuit Protection Yes, Multi fuse
Dimensions L x W x H mm 110 x 53 x 37
Environmental Requirements Indoor use only
Ambient Temperature range ºC 0 to + 45
Humidity Shall survive 90% relative humidity
over operating temperature
Safety Ratings Agencies USA
Canada
Europe
Japan
Taiwan
China
Britain
UL60950-1
CSA C22.2 NO.950
TUV/VDE-EN60950-1
J60950(H14)/J55001(H14)
CNS13438
GB4943-2001
EN60950-1:2000
PS121000A 12 V DC Power Supply
• 1 Amp
• UL Approved
• Interchangeable AC Cord
• F-Connector for DC Output
• Overload Protection
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com info@sonoradesign.com
Revised Mar 15 2012
5COAX POWER SUPPLY
Parameter UNIT PS201200
Rated Input Voltage Vac 100 to 240
Operating Input Range Vac 90 to 264
Rated Input Frequency Hz 47 to 63
Rated Input Current A 0.6 max
No Load Input Current mA < 25
Maximum Input Power W 30.53
AC Input connector 2 Conductor Wall, US PIN
Nominal DC Output Voltage Vdc 20
Rated load current A 1.2 max
Minimum load current A 0.0
Ripple & Noise mVp-p 150
DC Output Cable Feet 6
Switching Effi ciency % 78.6
DC Power Connector Type Each (1) F Female
DC Adaptor included Each (1) F71 Male to Male
Short Circuit Protection Yes, Multi fuse
Dimensions L x W x H mm 82 x 44 x 48
Environmental Requirements Indoor use only
Ambient Temperature range ºC 0 to + 45
Humidity Shall survive 90% relative humidity
over operating temperature
Safety Ratings Agencies USA
Canada
Europe
Japan
Taiwan
China
Britain
UL60950-1
CSA C22.2 NO.950
TUV/VDE-EN60950
J60950(H14)/J55001(H14)
CNS13438
GB4943-2001
EN60950-1:2004
PS201200 DC Power Supply
• 1.2 Amp
• UL Approved
• Wall Mount
• F-Connector for DC Output
• Overload Protection
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com info@sonoradesign.com
Revised Mar 15 2012
6COAX POWER SUPPLY
Parameter UNIT PS242000A
Rated Input Voltage Vac 100 to 240
Operating Input Range Vac 90 to 264
Rated Input Frequency Hz 47 to 63
Rated Input Current A 1.2 max
No Load Input Current mA < 20
Maximum Input Power W 58.6
AC Input Cable Feet 6
AC Input connector Mini 2 pin
Nominal DC Output Voltage Vdc 24
Rated load current A 2.08 max
Minimum load current A 0.05A
Ripple & Noise mVp-p 240
Switching Effi ciency % 85
DC Output Cable Feet 6
DC Power Connector Type Each (1) F Female
DC Adaptor included Each (1) F71 Male to Male
Short Circuit Protection Yes, Multi fuse
Dimensions L x W x H mm 110 x 53 x 37
Environmental Requirements Indoor use only
Ambient Temperature range ºC 0 to + 45
Humidity Shall survive 90% relative humidity
over operating temperature
Safety Ratings Agencies USA
Canada
Europe
Japan
Taiwan
China
Britain
UL60950-1
CSA C22.2 NO.950
TUV/VDE-EN60950-1
J60950(H14)/J55001(H14)
CNS13438
GB4943-2001
EN60950-1:2000
PS242000A DC Power Supply
• 2.08 Amp (50 Watt)
• UL Approved
• Interchangeable AC Cord
• F-Connector for DC Output
• Overload Protection
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com info@sonoradesign.com
Revised Mar 15 2012
7COAX POWER SUPPLY & INSERTER
Parameter UNIT PS121000A
Rated Input Voltage Vac 100 to 240
Operating Input Range Vac 90 to 264
Rated Input Frequency Hz 47 to 63
Rated Input Current A 0.4 max
No Load Input Current mA < 20
Maximum Input Power W 16.58
AC Input Cable Feet 6
AC Input connector Mini 2 pin
Nominal DC Output Voltage Vdc 12
Rated load current A 1 max
Minimum load current A 0.05A
Ripple & Noise mVp-p 120
DC Output Cable Feet 6
Switching Effi ciency % 72
DC Power Connector Type Each (1) F Female
DC Adaptor included Each (1) F71 Male to Male
Short Circuit Protection Yes, Multi fuse
Dimensions L x W x H mm 110 x 53 x 37
Environmental Requirements Indoor use only
Ambient Temperature range ºC 0 to + 45
Humidity Shall survive 90% relative humidity
over operating temperature
Safety Ratings Agencies USA
Canada
Europe
Japan
Taiwan
China
Britain
UL60950-1
CSA C22.2 NO.950
TUV/VDE-EN60950-1
J60950(H14)/J55001(H14)
CNS13438
GB4943-2001
EN60950-1:2000
Parameter Unit HRFPIDC Input Connector Each (1) F Female
DC Input Current A 3 max
RF+ DC Each (1) F Female
RF ONLY Each (1) F Female
RF Input to RF Output MHz 2 to 2400 MHz
RF Input to RF Output dB 1 dB max
RF Input Return Loss dB > 14 dB
RF Output Return Loss dB >14 dB
HRPIR121 12 V DC Power Supply & Inserter
• 1 Amp
• UL Approved
• Interchangeable AC Cord
• F-Connector for DC Output
• Overload Protection
• DC Power Inserter HRFPI
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com info@sonoradesign.com
Revised Mar 15 2012
8COAX POWER SUPPLY & INSERTER
Parameter UNIT PS201200
Rated Input Voltage Vac 100 to 240
Operating Input Range Vac 90 to 264
Rated Input Frequency Hz 47 to 63
Rated Input Current A 0.6 max
No Load Input Current mA < 25
Maximum Input Power W 30.53
AC Input connector 2 Conductor Wall, US PIN
Nominal DC Output Voltage Vdc 20
Rated load current A 1.2 max
Minimum load current A 0.0
Ripple & Noise mVp-p 150
DC Output Cable Feet 6
Switching Effi ciency % 78.6
DC Power Connector Type Each (1) F Female
DC Adaptor included Each (1) F71 Male to Male
Short Circuit Protection Yes, Multi fuse
Dimensions L x W x H mm 82 x 44 x 48
Environmental Requirements Indoor use only
Ambient Temperature range ºC 0 to + 45
Humidity Shall survive 90% relative humidity
over operating temperature
Safety Ratings Agencies USA
Canada
Europe
Japan
Taiwan
China
Britain
UL60950-1
CSA C22.2 NO.950
TUV/VDE-EN60950
J60950(H14)/J55001(H14)
CNS13438
GB4943-2001
EN60950-1:2004
Parameter Unit HRFPIDC Input Connector Each (1) F Female
DC Input Current A 3 max
RF+ DC Each (1) F Female
RF ONLY Each (1) F Female
RF Input to RF Output MHz 2 to 2400 MHz
RF Input to RF Output dB 1 dB max
RF Input Return Loss dB > 14 dB
RF Output Return Loss dB >14 dB
HRPIR20 20V DC Power Supply & Inserter
• 1.2 Amp
• UL Approved
• Wall Mount
• F-Connector for DC Output
• Overload Protection
• DC Power Inserter HRFPI
PS20
1200HRF
PI
16 V Min
95
A stacked polarity LNB or even polarity
LNB requires a minimum of 16 volts
at its input. Model HRFPIR20 power
inserters include model HRFPI and model
PS201200 power supply.
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com info@sonoradesign.com
Revised Mar 15 2012
9COAX POWER SUPPLY & INSERTER
Parameter UNIT PS242000A
Rated Input Voltage Vac 100 to 240
Operating Input Range Vac 90 to 264
Rated Input Frequency Hz 47 to 63
Rated Input Current A 1.2 max
Maximum Input Power W 58.6
AC Input Cable Feet 6
AC Input connector Mini 2 pin
Nominal DC Output Voltage Vdc 24
Rated load current A 2.08 max
Minimum load current A 0.05A
Ripple & Noise mVp-p 240
DC Output Cable Feet 6
DC Power Connector Type Each (1) F Female
DC Adaptor included Each (1) F71 Male to Male
Short Circuit Protection Yes, Multi fuse
Dimensions L x W x H mm 110 x 53 x 37
Environmental Requirements Indoor use only
Ambient Temperature range ºC 0 to + 45
Humidity Shall survive 90% relative humidity
over operating temperature
Safety Ratings Agencies USA
Canada
Europe
Japan
Taiwan
China
Britain
UL60950-1
CSA C22.2 NO.950
TUV/VDE-EN60950-1
J60950(H14)/J55001(H14)
CNS13438
GB4943-2001
EN60950-1:2000
Parameter Unit HRFPIDC Input Connector Each (1) F Female
DC Input Current A 3 max
RF+ DC Each (1) F Female
RF ONLY Each (1) F Female
RF Input to RF Output MHz 2 to 2400 MHz
RF Input to RF Output dB 1 dB max
RF Input Return Loss dB > 14 dB
RF Output Return Loss dB >14 dB
HRPIR242 24V DC Power Supply & Inserter
• 2.08 Amp (50 Watt)
• UL Approved PS242000A• Interchangeable AC Cord
• F-Connector for DC Input
• Overload Protection
• DC Power Inserter HRFPI
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com info@sonoradesign.com
Revised Mar 15 2012
10DIRECTV SWiM COAX POWER SUPPLY & INSERTER
Parameter UNIT PS242000A
Rated Input Voltage Vac 100 to 240
Operating Input Range Vac 90 to 264
Rated Input Frequency Hz 47 to 63
Rated Input Current A 1.2 max
Maximum Input Power W 58.6
AC Input Cable Feet 6
AC Input connector Mini 2 pin
Nominal DC Output Voltage Vdc 24
Rated load current A 2.08 max
Minimum load current A 0.05A
Ripple & Noise mVp-p 240
DC Output Cable Feet 6
DC Power Connector Type Each (1) F Female
DC Adaptor included Each (1) F71 Male to Male
Short Circuit Protection Yes, Multi fuse
Dimensions L x W x H mm 110 x 53 x 37
Environmental Requirements Indoor use only
Ambient Temperature range ºC 0 to + 45
Humidity Shall survive 90% relative humidity
over operating temperature
Safety Ratings Agencies USA
Canada
Europe
Japan
Taiwan
China
Britain
UL60950-1
CSA C22.2 NO.950
TUV/VDE-EN60950-1
J60950(H14)/J55001(H14)
CNS13438
GB4943-2001
EN60950-1:2000
Parameter Unit HRFPIBDC Input Connector Each (1) F Female
DC Input Current A 3 max
RF Input + DC Output Each (1) F Female
RF Output + DC Output Each (1) F Female
RF Input to RF Output MHz 2 to 2400 MHz
RF Input to RF Output dB 1 dB max
RF Input Return Loss dB > 14 dB
RF Output Return Loss dB >14 dB
HRPIR242B 24 V DC Power Supply & Inserter
• 2.08 Amp (50 Watt)
• UL Approved PS242000A• Interchangeable AC Cord
• F-Connector for DC Input
• Overload Protection
• DC Power Inserter HRFPIB for (2) Outputs
Model HRPIR242B powers (2) SWM8switches via legacy port 3. The total
current draw at 24 volts is less than 800
mA.
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
SWM8
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
SWM8
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
DC
DC+RF
HRFPIBDC+RF
PS242000A
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com info@sonoradesign.com
Revised Mar 15 2012
11
Parameter UNIT PS242000A
Rated Input Voltage Vac 100 to 240
Operating Input Range Vac 90 to 264
Rated Input Frequency Hz 47 to 63
Rated Input Current A 1.2 max
Maximum Input Power W 58.6
AC Input Cable Feet 6
AC Input connector Mini 2 pin
Nominal DC Output Voltage Vdc 24
Rated load current A 2.08 max
Minimum load current A 0.05A
Ripple & Noise mVp-p 240
DC Output Cable Feet 6
DC Power Connector Type Each (1) F Female
DC Adaptor included Each (1) F71 Male to Male
Short Circuit Protection Yes, Multi fuse
Dimensions L x W x H mm 110 x 53 x 37
Environmental Requirements Indoor use only
Ambient Temperature range ºC 0 to + 45
Humidity Shall survive 90% relative humidity
over operating temperature
Safety Ratings Agencies USA
Canada
Europe
Japan
Taiwan
China
Britain
UL60950-1
CSA C22.2 NO.950
TUV/VDE-EN60950-1
J60950(H14)/J55001(H14)
CNS13438
GB4943-2001
EN60950-1:2000
Parameter Unit PS2x8DC Input Connectors Each (2) F Female
DC Input Current A 5 max
DC1 Outputs Each (4) F Female
DC2 Outputs Each (4) F Female
PS8-242000 Power Supply & DC Splitter
• 2.08 Amp (50 Watt)
• (1) UL Approved PS242000A• Interchangeable AC Cord
• F-Connector for DC Input
• Overload Protection
• DC Power Splitter PS2x8
PS8-242000
PS2x8P1
P2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
S W M 8
99º/101º18V 13V
18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
S W M 8
99º/101º18V 13V
18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
S W M 8
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
S W M 8
99º/101º18V 13V
18V22k
13V22k
FlexPort1
FlexPort2
PS242000A
Model PS8-242000 provides 24 volts at 2
amps of current to up to (4) outputs. Four
SWM8 switches or (2) SWM16 switches
may be powered with this model.
DIRECTV SWiM COAX POWER SUPPLY & DC SPLITTER
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com info@sonoradesign.com
Revised Mar 15 2012
12
Parameter UNIT PS242000A
Rated Input Voltage Vac 100 to 240
Operating Input Range Vac 90 to 264
Rated Input Frequency Hz 47 to 63
Rated Input Current A 1.2 max
Maximum Input Power W 58.6
AC Input Cable Feet 6
AC Input connector Mini 2 pin
Nominal DC Output Voltage Vdc 24
Rated load current A 2.08 max
Minimum load current A 0.05A
Ripple & Noise mVp-p 240
DC Output Cable Feet 6
DC Power Connector Type Each (1) F Female
DC Adaptor included Each (1) F71 Male to Male
Short Circuit Protection Yes, Multi fuse
Dimensions L x W x H mm 110 x 53 x 37
Environmental Requirements Indoor use only
Ambient Temperature range ºC 0 to + 45
Humidity Shall survive 90% relative humidity
over operating temperature
Safety Ratings Agencies USA
Canada
Europe
Japan
Taiwan
China
Britain
UL60950-1
CSA C22.2 NO.950
TUV/VDE-EN60950-1
J60950(H14)/J55001(H14)
CNS13438
GB4943-2001
EN60950-1:2000
Parameter Unit PS2x8DC Input Connectors Each (2) F Female
DC Input Current A 5 max
DC1 Outputs Each (4) F Female
DC2 Outputs Each (4) F Female
PS8-244000 Power Supply & DC Splitter
• (2) x 2.08 Amp
• (2) UL Approved PS242000A• Interchangeable AC Cord
• F-Connector for DC Input
• Overload Protection
• DC Power Splitter PS2x8
Legacy 1
Legacy 3
Legacy 4
FLEX1 OUT
FLEX2 OUT
Legacy 2
SWM2
SWM1 PWR
DC/PWR
S W M 1 6
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 4
FLEX1 OUT
FLEX2 OUT
Legacy 2
SWM2
SWM1 PWR
DC/PWR
S W M 1 6
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
PS2x8P1
P2
PS8-244000
SWM-FAN
Legacy 1
Legacy 3
Legacy 4
FLEX1 OUT
FLEX2 OUT
Legacy 2
SWM2
SWM1 PWR
DC/PWR
S W M 1 6
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 4
FLEX1 OUT
FLEX2 OUT
Legacy 2
SWM2
SWM1 PWR
DC/PWR
S W M 1 6
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
PS
24
20
00
A
PS242000A
Model PS8-244000 provides 24 volts at
4 amps of current to (8) outputs. Eight
SWM8 switches or (4) SWM16 switches
may be powered with this model.
DIRECTV SWiM COAX POWER SUPPLY & DC SPLITTER
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com info@sonoradesign.com
Revised Mar 15 2012
13
Model
PS242000Apowers a
SWM8 switch
via the Legacy
3 connector. The
SWM8 generates the
DC voltages for the LNB.
Model HRPIR242B powers (2)
SWM8 switches via legacy
por t 3. The
total current
draw is less
t h a n 8 0 0
mA.
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
SWM8
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
SWM8
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
DC
DC+RF
HRFPIBDC+RF
PS242000A
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
SWM8
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
10199
103
110 119
PS242000A
POWER SUPPLIESS
WM
8 S
WIT
CH
PO
WE
RIN
G
Model SWM8 can be powered via Legacy Port 3.
The current draw was measured at three voltages:
• 29 V = 324 mA = 9.40 watts
• 24 V = 385 mA = 9.24 watts
• 20V = 460 mA = 9.20 watts
Model SL5 LNBs employ current management to
minimize the current carried per coax. (500 mA total)
18 V = 200 mA, 18V 22kHz = 200 mA, 13V = 50 mA,
13V 22kHz = 50 mA.
Model HRPIR242B powers (1) SWM16 switch and (1)
SWM8 switch. Model SD SWM-E2 splitter pass DC
from only one SWM so a single switch talks to the
dish. The total current is less than 1.5 Amps.
SWM8 POWERING
24 Vdc 2 Amp
18 Vdc, 0.2A 16 Vdc Minimum
16 Vdc Minimum
(4) coax to SL5
SWM8 Powering of SL5
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
SWM8
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
24V2A HRPIR
242B
18 Vdc, 0.2A
13 Vdc, 50mA
13 Vdc, 50mA
10199
SL5103
110 119
200 ft Max
PS8-242000
PS2x8P1
P2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
S W M 8
99º/101º18V 13V
18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
S W M 8
99º/101º18V 13V
18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
S W M 8
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
S W M 8
99º/101º18V 13V
18V22k
13V22k
FlexPort1
FlexPort2
PS242000A
Model PS8-242000provides 24 volts at
2 amps of current
to up to (4) outputs.
A s e c o n d P S 2 4 -2000A supply can be
added later to power
a d d i t i o n a l S W M
switches.
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
S W M 8
99º/101º 103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
FACE DOWN
Legacy 1
Legacy 3
Legacy 4
FLEX1 OUT
FLEX2 OUT
Legacy 2
SWM2
SWM1 PWR
DC / PWR
S W M 1 6
99º/101º 103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
DC
DC+RF DC+RFHRFPIB2-2300 MHz
PS242000A
10199
SL5103
110 119
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com info@sonoradesign.com
Revised Mar 15 2012
14
PS2x8P1
P2 PS8-244000
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
S W M 8
99º/101º18V 13V
18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
S W M 8
99º/101º18V 13V
18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
S W M 8
99º/101º18V 13V
18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
S W M 8
99º/101º18V 13V
18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
S W M 8
99º/101º18V 13V
18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
S W M 8
99º/101º18V 13V
18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
S W M 8
99º/101º18V 13V
18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
S W M 8
99º/101º18V 13V
18V22k
13V22k
FlexPort1
FlexPort2
HRFPIB
SWM-FAN
PS
24
20
00
A
PS242000A
POWER SUPPLIES
Model PS8-244000 provides 24 volts at 4 amps of
current to up to (8) outputs. Powering (4) SWM8
switches is provided by power supply 1.
SW
M S
WIT
CH
PO
WE
RIN
G
The second power supply powers the other (4)
SWM8 switches. The current use per supply is (4) x
385 mA = 1.54 Amps. NO SL5 powering is allowed
with this confi guration.
Put 4 in a box and you have the heat of a 40 watt
light bulb. Put (8) in a box and the heat is like a 75
watt bulb. Model SWM-FAN provides airfl ow for lock
boxes housing SWM8 switches.
Model HRFPIB is used to split the DC of one supply
to power model SWM-FAN. (105 mA)
Model SWM16 can be powered via the DC/PWR port.
The current draw was measured at three voltages:
• 29 V = 607 mA = 17.6 watts
• 24 V = 720 mA = 17.3 watts
• 20 V = 860 mA = 17.3 watts
Model PS8-244000 provides 24 volts at 4 amps of
current to up to (8) outputs. Powering (2) SWM16
switches draws 1.4 Amps from power supply 1.
The second power supply powers the other (2) SWM8
switches. The current use for supply 2 is (2) x 720 mA +
105 mA (fan) = 1.5 Amps. NO SL5 powering is allowed
with this confi guration.
SWM16 POWERING
Legacy 1
Legacy 3
Legacy 4
FLEX1 OUT
FLEX2 OUT
Legacy 2
SWM2
SWM1 PWR
DC/PWR
S W M 1 6
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 4
FLEX1 OUT
FLEX2 OUT
Legacy 2
SWM2
SWM1 PWR
DC/PWR
S W M 1 6
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
PS2x8P1
P2
PS8-244000
SWM-FAN
Legacy 1
Legacy 3
Legacy 4
FLEX1 OUT
FLEX2 OUT
Legacy 2
SWM2
SWM1 PWR
DC/PWR
S W M 1 6
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 4
FLEX1 OUT
FLEX2 OUT
Legacy 2
SWM2
SWM1 PWR
DC/PWR
S W M 1 6
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
PS
24
20
00
A
PS242000A
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com info@sonoradesign.com
Revised Mar 15 2012
15POWER SUPPLIESS
WM
8 S
WIT
CH
PO
WE
RIN
G
SWM8 to SL5 Communication
Issue : Too many SWM8’s talking to the SL5.
What is the aff ect of combining the multiple SWM LNB
power and 22 kHz tones?
Multiple 22 kHz signals when combined can create
constructive and destructive interference. 180º out of
phase combining will reduce the 22 kHz signal to zero!
Solution: Model 4SATPL-T is a polarity locker that
generates a fresh set of voltages and 22 kHz tones
while blocking the 22 kHz signals generated by
multiple switches.
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
SWM8
99º/101º18V 13V
18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
SWM8
99º/101º18V 13V
18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
SWM8
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
HRvS4 HRvS4 HRvS4 HRvS4
18
28V, 1.5A
101
99
103
110 119
PI-28
PI-28
PI-28
50 ft
150 ft
100 ft
20 V
19.8 V
20.2 VIN PHASE 22 KHZ
DESTRUCTIVE PHASE SHIFT 22 KHZ
CONSTRUCTIVE PHASE SHIFT 22 KHZ
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
SWM8
99º/101º18V 13V
18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
SWM8
99º/101º18V 13V
18V22k
13V22k
FlexPort1
FlexPort2
Legacy 1
Legacy 3
Legacy 2
OFF-AIR
SWM1 PWR
SWM2
SWM8
99º/101º
103º/110º/119º
18V 13V18V22k
13V22k
FlexPort1
FlexPort2
HRvS4 HRvS4 HRvS4 HRvS4
18
28V, 1.5A
101
99
103
110 119
PI-28
PI-28
PI-28
50 ft
150 ft
100 ft
HRPID1422APOLARITY LOCKER
2420v
101ºLHCP
14v 20v22k
14v22k
110/119ºRHCP
101ºRHCP
119ºRHCP
PS24
2000
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com info@sonoradesign.com
Revised Mar 15 2012
16POWER SUPPLIESL
NB
PO
WE
RIN
G
Model SL5S LNBs include an (8) tuner SWM switch. A
single coax runs from the LNB to the PI-21 power supply.
SL5S POWERING
top related