stormscope brochure 2015 ss brochure 2005 layout€¦ · model wx-1000 series lynx ... this...
Post on 16-Aug-2020
7 Views
Preview:
TRANSCRIPT
M O D E L W X - 9 5 0 G
LIGHTNING FAST
Like all Stormscope systems, the WX-1000 Series provides early
detection of storm cells, and displays lightning at ranges up to 200
nautical miles. Simply turn your system on and monitor thunderstorm
activity even before you leave the ground. Pick four selectable ranges,
two separate views, a built-in checklist, and a timer to keep track of your
elapsed time on approach. The WX-1000E Series can be configured to
display lightning on an EFIS or radar indicator.
Designed specifically to monitor lighting from the ground, the WX-
950G provides two modes of operation — cell mode and strike mode.
In cell mode, the display shows storm areas with the greatest intensity.
In strike mode, the WX-950G detects and maps individual strikes,
allowing you to monitor sporadic electrical activity that may indicate
the beginnings of a storm. Ranges of 25, 50, 100 and 200 nm are
available in 360° view or 120° forward looking view.
WX-1000E w-optional 429 EFIS output
View Stormscope real-time lightning data as well as subscription-free ADS-B weather & traffic data on the same display
STORMSCOPE ®
Aviation Products
MODEL WX-1000 SERIES LYNX®
NGT-9000 Transponder & Display System S P E C I F I C A T I O N S
This brochure consists of L3 Aviation Products general capabilities information that does not contain controlled technical data as defined within the International Traffic in Arms (ITAR) Part 120.10 or Export Administration Regulations (EAR) Part 734.7-11.
Aviation Products
5353 52nd Street SE
Grand Rapids, MI 49512
Tel: 800.253.9525 (toll-free in the U.S.) / 616.949.6600
Fax: 616.285.4224
www.L3AvationProducts.com
©2017 L3 Aviation Products • Printed in USA
L-3 Aviation Products is a leading provider of
commercial and military avionics, as well as MRO
services. We manufacture a diverse line of safety- and
efficiency-enhancing products that sets the standard
for next-generation cockpit requirements.
Visit us online at www.L3AviationProducts.com
Display (L x W x H) Display dependent 8.3 in. x 3.4 in. x 3.4 in. (21 cm x 8.6 cm x 8.6 cm)
Antenna (L x W x H) 6.9 in. x 3.5 in. x 1.0 in. (17.4 cm x 8.7 cm x 2.5 cm) 10.0 in. x 4.5 in. x 1.1 in. (25.6 cm x 11.4 cm x 2.9 cm)
Processor (L x W x H) 12 in. x 2.2 in. x 5.6 in. (30.5 cm x 5.6 cm x 14.2 cm) 12.7 in. x 4.9 in. x 3.4 in. (32.2 cm x 12.4 cm x 8.6 cm)
Display Weight Display dependent 2.30 lbs. (1.00 kg)
Antenna Weight 0.84 lbs. (0.38 kg) without doubler 2.00 lbs. (0.91 kg) with doubler
Processor Weight 2.50 lbs. (1.13 kg) including mounting tray 6.67 lbs. (3.02 kg) without double
Electrical Input 11 to 32 VDC 10.5 to 32 VDC
Electrical Current .082 A @ 12 VDC / .038 A @ 28 VDC 28 Watts / Gyro excitation (400Hz): 5-50 Volts peak
Compliances FAA TSO C110A / JTSO Approved FAA TSO C110A / Various Foreign Approvals
Display Limits Display dependent -20O to +55O C (-4O to +131O F) / 55,000 feet max
Antenna Limits -55O to +70O C (-67O to +158O F) / 55,000 feet max -55O to +70O C (-67O to +158O F) / 55,000 feet max
Processor Limits -55O to +70O C (-67O to +158O F) / 55,000 feet max -55O to +70O C (-67O to +158O F) / 55,000 feet max
* Please contact L3 Aviation Products for specifications on the WX-950G
WX-500 WX-1000 SERIES
WX-1000 SERIES FEATURES
• 360° or 120° selectable view out to 200 nm range
• Electrical discharge information stored on all ranges simultaneously
• “CLEAR” function helps determine whether cells are building or dissipating
• Optional dedicated high resolution CRT display
• Six installer-programmable checklists
• Used by the military as the AN/AMS-2 and carries national stock numbers (1,2)
• Heading stabilized when configured with a compatible heading system (1,2)
• Uses an RS232 or RS422 input from a compatible Loran/GPS (2)
• Available with ARINC 429 EFIS output (2)
• Creates Loran/GPS-generated Course Deviation Indicator (CDI) (2)
(1) Model WX-1000+ features(2) Model WX-1000E features
WX-950G FEATURES
• Designed as a Ground Based Weather Station
• Operates in 25, 50, 100 and 200 nm ranges
• Features selectable strike and cell modes
• Displays multiple views:
– 360° view of electrical activity in all directions
– forward looking 120° view
• Uses a high resolution, 3-inch ATI display/processor for optimumimage precision
When paired with the L3 Stormscope WX-500
Lightning Detection System, the Lynx NGT-9000
screen will display real-time lightning data at ranges of
25-200 nmi. Even with datalink weather, nothing
provides the accuracy and timeliness of a Stormscope
system for mapping lightning activity and associated
weather threats like wind-shear, turbulence and hail.
The WX-500 lets you choose between strike and cell
mode, depending on your preference. Minimizing the
transponder screen enables pilots to view traffic and
lightning on the same display, providing a complete
picture of hazards surrounding your aircraft.
The Lynx NGT-9000 is a Mode S ES transponder that
also provides ADS-B weather and traffic information.
The unit’s subscription-free weather data is divided
between two pages - the first page showing NEXRAD
weather and restricted airspace (TFRs) and a second
page showing Winds and Temps Aloft data. The
weather data is overlaid on a moving map which can
be customized in both detail and range. Combining a
Lynx system with a Stormscope system provides the
complete weather picture. Learn more at L3Lynx.com.
Stormscope Brochure 2015_SS Brochure 2005 Layout.qxd 2/1/2017 11:51 AM Page 2
MATURE STAGEDatalink weather displays radar images showing areas of precipitation. The cloud-to-groundlightning service available through datalink accounts for only 20% of all lightning activityand is presented in a delayed snapshot.
Stormscope plots real-time lightning - within the cloud, between clouds and cloud to ground.
DISSIPATING STAGEDatalink and radar show the onset of heavy precipitation.
Stormscope aids in identifying a lightning-free route around precipitation.
Datalink + Stormscope = The whole weather picture.
CUMULUS STAGEAs the thunderstorm builds, (+) and (-) ions are separated by convective airflow. Lightning isthe electrical discharge between these oppositely charged areas of the thunderstorm and isinstantly mapped by Stormscope.
Radar and datalink weather show precipitation only. There is no radar image yet as the stormis usually precipitation-free at this early stage.
- Intra-Cloud Lightning- Cloud-to-Cloud Lightning- Windshear- Turbulence
- Hail- Low Ceilings- Low Visibility- Icing Conditions
- Microbursts- Squall Lines- Tornadoes
- Intra-Cloud Lightning- Cloud-to-Cloud Lightning
- Cloud-to-Ground Lightning- Low Ceilings
- Light Precipitation-Heavy Rainfall -Minimal Lightning Activity
Displaying lightning information at ranges of 25-200 nm,
the Stormscope® WX-500 is designed to interface with
most multi-function displays (MFD). With the WX-500,
you can view lightning information directly on your MFD
— either on a dedicated page or overlaid on the moving
map. Even if your MFD already has datalink weather,
nothing provides the accuracy and timeliness of a
Stormscope system for mapping ALL lightning activity.
The WX-500 lets you choose between strike and cell
mode, depending on your preference. By adding the
Stormscope WX-500, lightning information can be
superimposed over datalink weather or radar returns
(display dependent). The operating modes of the
Stormscope WX-500 are controlled directly through your
MFD or radar indicator (with RGC350), eliminating the
cost of an extra controller.
WX-500 FEATURES
• Up to 200 nm range
• Pilot selectable strike and cell modes
• Display of airspace in 120° forward and 360° surrounding views
• Heading stabilized when configured with compatible system
• Stores lightning data on all ranges simultaneously
• Strike rate indicator
• View lightning on multiple displays at the same time
• View on dedicated page or overlaid on moving map
Stormscope model WX-500 integrated onto typical MFD
S T O R M S C O P EM O D E L W X - 5 0 0
L3 Lynx NGT-9000 ADS-B Transponder & Display System
Garmin G1000, G900, GTN Series, GNS400/500 Series, GMX-200
Avidyne FlightMax, Entegra, EX500/600, EX5000, MHD300, IFD540
Select Radar Indicators (most Radar Indicators using the RGC-350)
Apollo MX-20, UPSAT MX-20, Goodrich i-linc
Cobham (Chelton) 3D Synthetic Vision EFIS
Aspen Avionics Evolution Series
Sandel ST3400, 3500, 4500
Moving (Map) Terrain MFD
Bendix King KMD-850, 550
OP Technologies
DISPLAY OPTIONS
If you have questions about your display, please call an L3 Aviation Products representative for an updated interface listing.
Stormscope Brochure 2015_SS Brochure 2005 Layout.qxd 2/1/2017 11:51 AM Page 1
MATURE STAGEDatalink weather displays radar images showing areas of precipitation. The cloud-to-groundlightning service available through datalink accounts for only 20% of all lightning activityand is presented in a delayed snapshot.
Stormscope plots real-time lightning - within the cloud, between clouds and cloud to ground.
DISSIPATING STAGEDatalink and radar show the onset of heavy precipitation.
Stormscope aids in identifying a lightning-free route around precipitation.
Datalink + Stormscope = The whole weather picture.
CUMULUS STAGEAs the thunderstorm builds, (+) and (-) ions are separated by convective airflow. Lightning isthe electrical discharge between these oppositely charged areas of the thunderstorm and isinstantly mapped by Stormscope.
Radar and datalink weather show precipitation only. There is no radar image yet as the stormis usually precipitation-free at this early stage.
- Intra-Cloud Lightning- Cloud-to-Cloud Lightning- Windshear- Turbulence
- Hail- Low Ceilings- Low Visibility- Icing Conditions
- Microbursts- Squall Lines- Tornadoes
- Intra-Cloud Lightning- Cloud-to-Cloud Lightning
- Cloud-to-Ground Lightning- Low Ceilings
- Light Precipitation-Heavy Rainfall -Minimal Lightning Activity
Displaying lightning information at ranges of 25-200 nm,
the Stormscope® WX-500 is designed to interface with
most multi-function displays (MFD). With the WX-500,
you can view lightning information directly on your MFD
— either on a dedicated page or overlaid on the moving
map. Even if your MFD already has datalink weather,
nothing provides the accuracy and timeliness of a
Stormscope system for mapping ALL lightning activity.
The WX-500 lets you choose between strike and cell
mode, depending on your preference. By adding the
Stormscope WX-500, lightning information can be
superimposed over datalink weather or radar returns
(display dependent). The operating modes of the
Stormscope WX-500 are controlled directly through your
MFD or radar indicator (with RGC350), eliminating the
cost of an extra controller.
WX-500 FEATURES
• Up to 200 nm range
• Pilot selectable strike and cell modes
• Display of airspace in 120° forward and 360° surrounding views
• Heading stabilized when configured with compatible system
• Stores lightning data on all ranges simultaneously
• Strike rate indicator
• View lightning on multiple displays at the same time
• View on dedicated page or overlaid on moving map
Stormscope model WX-500 integrated onto typical MFD
S T O R M S C O P EM O D E L W X - 5 0 0
L3 Lynx NGT-9000 ADS-B Transponder & Display System
Garmin G1000, G900, GTN Series, GNS400/500 Series, GMX-200
Avidyne FlightMax, Entegra, EX500/600, EX5000, MHD300, IFD540
Select Radar Indicators (most Radar Indicators using the RGC-350)
Apollo MX-20, UPSAT MX-20, Goodrich i-linc
Cobham (Chelton) 3D Synthetic Vision EFIS
Aspen Avionics Evolution Series
Sandel ST3400, 3500, 4500
Moving (Map) Terrain MFD
Bendix King KMD-850, 550
OP Technologies
DISPLAY OPTIONS
If you have questions about your display, please call an L3 Aviation Products representative for an updated interface listing.
Stormscope Brochure 2015_SS Brochure 2005 Layout.qxd 2/1/2017 11:51 AM Page 1
M O D E L W X - 9 5 0 G
LIGHTNING FAST
Like all Stormscope systems, the WX-1000 Series provides early
detection of storm cells, and displays lightning at ranges up to 200
nautical miles. Simply turn your system on and monitor thunderstorm
activity even before you leave the ground. Pick four selectable ranges,
two separate views, a built-in checklist, and a timer to keep track of your
elapsed time on approach. The WX-1000E Series can be configured to
display lightning on an EFIS or radar indicator.
Designed specifically to monitor lighting from the ground, the WX-
950G provides two modes of operation — cell mode and strike mode.
In cell mode, the display shows storm areas with the greatest intensity.
In strike mode, the WX-950G detects and maps individual strikes,
allowing you to monitor sporadic electrical activity that may indicate
the beginnings of a storm. Ranges of 25, 50, 100 and 200 nm are
available in 360° view or 120° forward looking view.
WX-1000E w-optional 429 EFIS output
View Stormscope real-time lightning data as well as subscription-free ADS-B weather & traffic data on the same display
STORMSCOPE ®
Aviation Products
MODEL WX-1000 SERIES LYNX®
NGT-9000 Transponder & Display System S P E C I F I C A T I O N S
This brochure consists of L3 Aviation Products general capabilities information that does not contain controlled technical data as defined within the International Traffic in Arms (ITAR) Part 120.10 or Export Administration Regulations (EAR) Part 734.7-11.
Aviation Products
5353 52nd Street SE
Grand Rapids, MI 49512
Tel: 800.253.9525 (toll-free in the U.S.) / 616.949.6600
Fax: 616.285.4224
www.L3AvationProducts.com
©2017 L3 Aviation Products • Printed in USA
L-3 Aviation Products is a leading provider of
commercial and military avionics, as well as MRO
services. We manufacture a diverse line of safety- and
efficiency-enhancing products that sets the standard
for next-generation cockpit requirements.
Visit us online at www.L3AviationProducts.com
Display (L x W x H) Display dependent 8.3 in. x 3.4 in. x 3.4 in. (21 cm x 8.6 cm x 8.6 cm)
Antenna (L x W x H) 6.9 in. x 3.5 in. x 1.0 in. (17.4 cm x 8.7 cm x 2.5 cm) 10.0 in. x 4.5 in. x 1.1 in. (25.6 cm x 11.4 cm x 2.9 cm)
Processor (L x W x H) 12 in. x 2.2 in. x 5.6 in. (30.5 cm x 5.6 cm x 14.2 cm) 12.7 in. x 4.9 in. x 3.4 in. (32.2 cm x 12.4 cm x 8.6 cm)
Display Weight Display dependent 2.30 lbs. (1.00 kg)
Antenna Weight 0.84 lbs. (0.38 kg) without doubler 2.00 lbs. (0.91 kg) with doubler
Processor Weight 2.50 lbs. (1.13 kg) including mounting tray 6.67 lbs. (3.02 kg) without double
Electrical Input 11 to 32 VDC 10.5 to 32 VDC
Electrical Current .082 A @ 12 VDC / .038 A @ 28 VDC 28 Watts / Gyro excitation (400Hz): 5-50 Volts peak
Compliances FAA TSO C110A / JTSO Approved FAA TSO C110A / Various Foreign Approvals
Display Limits Display dependent -20O to +55O C (-4O to +131O F) / 55,000 feet max
Antenna Limits -55O to +70O C (-67O to +158O F) / 55,000 feet max -55O to +70O C (-67O to +158O F) / 55,000 feet max
Processor Limits -55O to +70O C (-67O to +158O F) / 55,000 feet max -55O to +70O C (-67O to +158O F) / 55,000 feet max
* Please contact L3 Aviation Products for specifications on the WX-950G
WX-500 WX-1000 SERIES
WX-1000 SERIES FEATURES
• 360° or 120° selectable view out to 200 nm range
• Electrical discharge information stored on all ranges simultaneously
• “CLEAR” function helps determine whether cells are building or dissipating
• Optional dedicated high resolution CRT display
• Six installer-programmable checklists
• Used by the military as the AN/AMS-2 and carries national stock numbers (1,2)
• Heading stabilized when configured with a compatible heading system (1,2)
• Uses an RS232 or RS422 input from a compatible Loran/GPS (2)
• Available with ARINC 429 EFIS output (2)
• Creates Loran/GPS-generated Course Deviation Indicator (CDI) (2)
(1) Model WX-1000+ features(2) Model WX-1000E features
WX-950G FEATURES
• Designed as a Ground Based Weather Station
• Operates in 25, 50, 100 and 200 nm ranges
• Features selectable strike and cell modes
• Displays multiple views:
– 360° view of electrical activity in all directions
– forward looking 120° view
• Uses a high resolution, 3-inch ATI display/processor for optimumimage precision
When paired with the L3 Stormscope WX-500
Lightning Detection System, the Lynx NGT-9000
screen will display real-time lightning data at ranges of
25-200 nmi. Even with datalink weather, nothing
provides the accuracy and timeliness of a Stormscope
system for mapping lightning activity and associated
weather threats like wind-shear, turbulence and hail.
The WX-500 lets you choose between strike and cell
mode, depending on your preference. Minimizing the
transponder screen enables pilots to view traffic and
lightning on the same display, providing a complete
picture of hazards surrounding your aircraft.
The Lynx NGT-9000 is a Mode S ES transponder that
also provides ADS-B weather and traffic information.
The unit’s subscription-free weather data is divided
between two pages - the first page showing NEXRAD
weather and restricted airspace (TFRs) and a second
page showing Winds and Temps Aloft data. The
weather data is overlaid on a moving map which can
be customized in both detail and range. Combining a
Lynx system with a Stormscope system provides the
complete weather picture. Learn more at L3Lynx.com.
Stormscope Brochure 2015_SS Brochure 2005 Layout.qxd 2/1/2017 11:51 AM Page 2
M O D E L W X - 9 5 0 G
LIGHTNING FAST
Like all Stormscope systems, the WX-1000 Series provides early
detection of storm cells, and displays lightning at ranges up to 200
nautical miles. Simply turn your system on and monitor thunderstorm
activity even before you leave the ground. Pick four selectable ranges,
two separate views, a built-in checklist, and a timer to keep track of your
elapsed time on approach. The WX-1000E Series can be configured to
display lightning on an EFIS or radar indicator.
Designed specifically to monitor lighting from the ground, the WX-
950G provides two modes of operation — cell mode and strike mode.
In cell mode, the display shows storm areas with the greatest intensity.
In strike mode, the WX-950G detects and maps individual strikes,
allowing you to monitor sporadic electrical activity that may indicate
the beginnings of a storm. Ranges of 25, 50, 100 and 200 nm are
available in 360° view or 120° forward looking view.
WX-1000E w-optional 429 EFIS output
View Stormscope real-time lightning data as well as subscription-free ADS-B weather & traffic data on the same display
STORMSCOPE ®
Aviation Products
MODEL WX-1000 SERIES LYNX®
NGT-9000 Transponder & Display System S P E C I F I C A T I O N S
This brochure consists of L3 Aviation Products general capabilities information that does not contain controlled technical data as defined within the International Traffic in Arms (ITAR) Part 120.10 or Export Administration Regulations (EAR) Part 734.7-11.
Aviation Products
5353 52nd Street SE
Grand Rapids, MI 49512
Tel: 800.253.9525 (toll-free in the U.S.) / 616.949.6600
Fax: 616.285.4224
www.L3AvationProducts.com
©2017 L3 Aviation Products • Printed in USA
L-3 Aviation Products is a leading provider of
commercial and military avionics, as well as MRO
services. We manufacture a diverse line of safety- and
efficiency-enhancing products that sets the standard
for next-generation cockpit requirements.
Visit us online at www.L3AviationProducts.com
Display (L x W x H) Display dependent 8.3 in. x 3.4 in. x 3.4 in. (21 cm x 8.6 cm x 8.6 cm)
Antenna (L x W x H) 6.9 in. x 3.5 in. x 1.0 in. (17.4 cm x 8.7 cm x 2.5 cm) 10.0 in. x 4.5 in. x 1.1 in. (25.6 cm x 11.4 cm x 2.9 cm)
Processor (L x W x H) 12 in. x 2.2 in. x 5.6 in. (30.5 cm x 5.6 cm x 14.2 cm) 12.7 in. x 4.9 in. x 3.4 in. (32.2 cm x 12.4 cm x 8.6 cm)
Display Weight Display dependent 2.30 lbs. (1.00 kg)
Antenna Weight 0.84 lbs. (0.38 kg) without doubler 2.00 lbs. (0.91 kg) with doubler
Processor Weight 2.50 lbs. (1.13 kg) including mounting tray 6.67 lbs. (3.02 kg) without double
Electrical Input 11 to 32 VDC 10.5 to 32 VDC
Electrical Current .082 A @ 12 VDC / .038 A @ 28 VDC 28 Watts / Gyro excitation (400Hz): 5-50 Volts peak
Compliances FAA TSO C110A / JTSO Approved FAA TSO C110A / Various Foreign Approvals
Display Limits Display dependent -20O to +55O C (-4O to +131O F) / 55,000 feet max
Antenna Limits -55O to +70O C (-67O to +158O F) / 55,000 feet max -55O to +70O C (-67O to +158O F) / 55,000 feet max
Processor Limits -55O to +70O C (-67O to +158O F) / 55,000 feet max -55O to +70O C (-67O to +158O F) / 55,000 feet max
* Please contact L3 Aviation Products for specifications on the WX-950G
WX-500 WX-1000 SERIES
WX-1000 SERIES FEATURES
• 360° or 120° selectable view out to 200 nm range
• Electrical discharge information stored on all ranges simultaneously
• “CLEAR” function helps determine whether cells are building or dissipating
• Optional dedicated high resolution CRT display
• Six installer-programmable checklists
• Used by the military as the AN/AMS-2 and carries national stock numbers (1,2)
• Heading stabilized when configured with a compatible heading system (1,2)
• Uses an RS232 or RS422 input from a compatible Loran/GPS (2)
• Available with ARINC 429 EFIS output (2)
• Creates Loran/GPS-generated Course Deviation Indicator (CDI) (2)
(1) Model WX-1000+ features(2) Model WX-1000E features
WX-950G FEATURES
• Designed as a Ground Based Weather Station
• Operates in 25, 50, 100 and 200 nm ranges
• Features selectable strike and cell modes
• Displays multiple views:
– 360° view of electrical activity in all directions
– forward looking 120° view
• Uses a high resolution, 3-inch ATI display/processor for optimumimage precision
When paired with the L3 Stormscope WX-500
Lightning Detection System, the Lynx NGT-9000
screen will display real-time lightning data at ranges of
25-200 nmi. Even with datalink weather, nothing
provides the accuracy and timeliness of a Stormscope
system for mapping lightning activity and associated
weather threats like wind-shear, turbulence and hail.
The WX-500 lets you choose between strike and cell
mode, depending on your preference. Minimizing the
transponder screen enables pilots to view traffic and
lightning on the same display, providing a complete
picture of hazards surrounding your aircraft.
The Lynx NGT-9000 is a Mode S ES transponder that
also provides ADS-B weather and traffic information.
The unit’s subscription-free weather data is divided
between two pages - the first page showing NEXRAD
weather and restricted airspace (TFRs) and a second
page showing Winds and Temps Aloft data. The
weather data is overlaid on a moving map which can
be customized in both detail and range. Combining a
Lynx system with a Stormscope system provides the
complete weather picture. Learn more at L3Lynx.com.
Stormscope Brochure 2015_SS Brochure 2005 Layout.qxd 2/1/2017 11:51 AM Page 2
M O D E L W X - 9 5 0 G
LIGHTNING FAST
Like all Stormscope systems, the WX-1000 Series provides early
detection of storm cells, and displays lightning at ranges up to 200
nautical miles. Simply turn your system on and monitor thunderstorm
activity even before you leave the ground. Pick four selectable ranges,
two separate views, a built-in checklist, and a timer to keep track of your
elapsed time on approach. The WX-1000E Series can be configured to
display lightning on an EFIS or radar indicator.
Designed specifically to monitor lighting from the ground, the WX-
950G provides two modes of operation — cell mode and strike mode.
In cell mode, the display shows storm areas with the greatest intensity.
In strike mode, the WX-950G detects and maps individual strikes,
allowing you to monitor sporadic electrical activity that may indicate
the beginnings of a storm. Ranges of 25, 50, 100 and 200 nm are
available in 360° view or 120° forward looking view.
WX-1000E w-optional 429 EFIS output
View Stormscope real-time lightning data as well as subscription-free ADS-B weather & traffic data on the same display
STORMSCOPE ®
Aviation Products
MODEL WX-1000 SERIES LYNX®
NGT-9000 Transponder & Display System S P E C I F I C A T I O N S
This brochure consists of L3 Aviation Products general capabilities information that does not contain controlled technical data as defined within the International Traffic in Arms (ITAR) Part 120.10 or Export Administration Regulations (EAR) Part 734.7-11.
Aviation Products
5353 52nd Street SE
Grand Rapids, MI 49512
Tel: 800.253.9525 (toll-free in the U.S.) / 616.949.6600
Fax: 616.285.4224
www.L3AvationProducts.com
©2017 L3 Aviation Products • Printed in USA
L3 Aviation Products is a leading provider of
commercial and military avionics, as well as MRO
services. We manufacture a diverse line of safety- and
efficiency-enhancing products that sets the standard
for next-generation cockpit requirements.
Visit us online at www.L3AviationProducts.com
Display (L x W x H) Display dependent 8.3 in. x 3.4 in. x 3.4 in. (21 cm x 8.6 cm x 8.6 cm)
Antenna (L x W x H) 6.9 in. x 3.5 in. x 1.0 in. (17.4 cm x 8.7 cm x 2.5 cm) 10.0 in. x 4.5 in. x 1.1 in. (25.6 cm x 11.4 cm x 2.9 cm)
Processor (L x W x H) 12 in. x 2.2 in. x 5.6 in. (30.5 cm x 5.6 cm x 14.2 cm) 12.7 in. x 4.9 in. x 3.4 in. (32.2 cm x 12.4 cm x 8.6 cm)
Display Weight Display dependent 2.30 lbs. (1.00 kg)
Antenna Weight 0.84 lbs. (0.38 kg) without doubler 2.00 lbs. (0.91 kg) with doubler
Processor Weight 2.50 lbs. (1.13 kg) including mounting tray 6.67 lbs. (3.02 kg) without double
Electrical Input 11 to 32 VDC 10.5 to 32 VDC
Electrical Current .082 A @ 12 VDC / .038 A @ 28 VDC 28 Watts / Gyro excitation (400Hz): 5-50 Volts peak
Compliances FAA TSO C110A / JTSO Approved FAA TSO C110A / Various Foreign Approvals
Display Limits Display dependent -20O to +55O C (-4O to +131O F) / 55,000 feet max
Antenna Limits -55O to +70O C (-67O to +158O F) / 55,000 feet max -55O to +70O C (-67O to +158O F) / 55,000 feet max
Processor Limits -55O to +70O C (-67O to +158O F) / 55,000 feet max -55O to +70O C (-67O to +158O F) / 55,000 feet max
* Please contact L3 Aviation Products for specifications on the WX-950G
WX-500 WX-1000 SERIES
WX-1000 SERIES FEATURES
• 360° or 120° selectable view out to 200 nm range
• Electrical discharge information stored on all ranges simultaneously
• “CLEAR” function helps determine whether cells are building or dissipating
• Optional dedicated high resolution CRT display
• Six installer-programmable checklists
• Used by the military as the AN/AMS-2 and carries national stock numbers (1,2)
• Heading stabilized when configured with a compatible heading system (1,2)
• Uses an RS232 or RS422 input from a compatible Loran/GPS (2)
• Available with ARINC 429 EFIS output (2)
• Creates Loran/GPS-generated Course Deviation Indicator (CDI) (2)
(1) Model WX-1000+ features(2) Model WX-1000E features
WX-950G FEATURES
• Designed as a Ground Based Weather Station
• Operates in 25, 50, 100 and 200 nm ranges
• Features selectable strike and cell modes
• Displays multiple views:
– 360° view of electrical activity in all directions
– forward looking 120° view
• Uses a high resolution, 3-inch ATI display/processor for optimumimage precision
When paired with the L3 Stormscope WX-500
Lightning Detection System, the Lynx NGT-9000
screen will display real-time lightning data at ranges of
25-200 nmi. Even with datalink weather, nothing
provides the accuracy and timeliness of a Stormscope
system for mapping lightning activity and associated
weather threats like wind-shear, turbulence and hail.
The WX-500 lets you choose between strike and cell
mode, depending on your preference. Minimizing the
transponder screen enables pilots to view traffic and
lightning on the same display, providing a complete
picture of hazards surrounding your aircraft.
The Lynx NGT-9000 is a Mode S ES transponder that
also provides ADS-B weather and traffic information.
The unit’s subscription-free weather data is divided
between two pages - the first page showing NEXRAD
weather and restricted airspace (TFRs) and a second
page showing Winds and Temps Aloft data. The
weather data is overlaid on a moving map which can
be customized in both detail and range. Combining a
Lynx system with a Stormscope system provides the
complete weather picture. Learn more at L3Lynx.com.
Stormscope Brochure 2015_SS Brochure 2005 Layout.qxd 2/1/2017 11:58 AM Page 2
top related