structural and computational iccs20...

www.editrice-esculapio.it

Euro 25,00

Composite materials have aroused a great interest over the last few decades, as proven by the huge number of scientifi c papers and industrial progress. The increase in the use of composite structures in different engineering practices justify the present international meeting where researches from every part of the globe can share and discuss the recent advancements regarding the use of structural components within advanced applications such as buckling, vibrations, repair, reinforcements, concrete, composite laminated materials and more recent metamaterials.

Studies about composite structures are truly multidisciplinary and the given contributions can help other researches and professional engineers in their own fi eld. This Conference is suitable as a reference for engineers and scientists working in the professional fi eld, in the industry and the academia and it gives the possibility to share recent advancements in different engineering practices to the outside world. This book aims to collect selected plenary and key-note lectures of this International Conference.

For this reason, the establishment of this 20th edition of International Conference on Composite Structures has appeared appropriate to continue what has been begun during the previous editions. ICCS wants to be an occasion for many researchers from each part of the globe to meet and discuss about the recent advancements regarding the use of composite structures, sandwich panels, nanotechnology, bio-composites, delamination and fracture, experimental methods, manufacturing and other countless topics that have fi lled many sessions during this conference. As a proof of this event, which has taken place in Paris (France), selected plenary and key-note lectures have been collected in the present book.

TITLES IN THIS SERIES:

F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola Laminated Composite Doubly-Curved Shell Structures - Differential Ge-ometry Higher-Order Structural Theories - 1st Ed. 2016 - ISBN: 978-88-7488-958-7

F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola Laminated Composite Doubly-Curved Shell Structures - Differential and Integral Quadrature Strong Formulation Fi-nite Element Method - 1st Ed. 2016 - ISBN: 978-88-7488-958-7

F. Tornabene, N. Fantuzzi Mechanicsof Laminated Composite Doubly-Curved Shell Structures - 1st Ed. 2014 - ISBN: 9788874886876

SPB2015 - International Conference on Shells Plates and Beams - Editors: A. J.M. Ferreira, E. Viola, F. Tornabene - Ed. 2015 - ISBN: 9788874888863

F. Tornabene, R. Dimitri Stabilit dellequi-librio elastico - 1st Ed. 2015 - ISBN: 9788874888450

U. Andreaus Scienza delle Costru-zioni - Ed. 2016 - Volume unico - ISBN: 9788874889266

A. Taliercio Introduzione alla Mecca-nica dei Solidi - 2nd Ed. 2014 - ISBN: 9788874887781

A. Taliercio Meccanica dei Sistemi di Tra-vi 2nd Ed. 2009 - ISBN: 9788874882069

A. Taliercio, A. Corigliano MeccanicaComputazionale - 1st Ed. 2005 - ISBN: 9788874881888

A. Frangi Cinematica e Statica dei Siste-mi di Corpi Rigidi - 3rd Ed. 2013 - ISBN: 9788874886210

R. Brighenti Analisi Numerica dei Soli-di e delle Strutture - 1st Ed. 2014 - ISBN: 9788874887989

S. Lenci, F. Clementi I compositi nellin-gegneria strutturale - 1st Ed. 2009 - ISBN: 9788874883387

D. Bigoni, A. Di Tommaso, M. Gei, F. Laudiero, D. Zaccaria Geometria delle Masse - 1st Ed. 1995 - ISBN: 9788874887149

STRUCTURAL AND COMPUTATIONAL MECHANICS BOOK SERIES

ISSN 2421-2822

ISBN 978-889-385-041-4

Edited by

Antonio J.M. FerreiraWalid LarbiJean-Franois DeuFrancesco TornabeneNicholas Fantuzzi

The Esculapio Series in Structural and Com-putational Mechanics has been inaugurated with the aim of arranging a series of books in these key fi elds related to academic rese-arch, education and industrial applications. The Esculapio Series publishes high-level texts for academic students, deep studies on good practice and industrial technology, interesting and fundamental research topics related to industrial development and engi-neering practices. The readership encapsu-lates undergraduate and PhD students, re-searchers, scientists and free-lancers within applied mechanics topics. Civil/structural, mechanical, aerospace, naval, nuclear, auto-motive, materials, environmental, electrical, and biomedical engineers could benefi t from this book series. The present book series would be the natural home for authors pro-fi cient in mechanics of materials, mechanics of structures as well as computational and applied mechanics.

The Esculapio Series will focus on the fol-lowing research areas, but not limited to:

Applied mechanics Applied mathematics Computational mechanics Theoretical modeling Engineering structures Typical materials:

concrete, metal, wood, masonry, etc. Classical and advanced numerical

methods Composite Materials Nonlinearities Repair and reinforcements Meta-materials and advanced

materials SMART structural components

STRUCTURAL AND COMPUTATIONAL MECHANICS BOOK SERIES

PROCEEDINGS

Conservatoire National des Arts et Mtiers4-7 September 2017

ICCS2020TH INTERNATIONAL CONFERENCE

ON COMPOSITE STRUCTURES

ICCS20

20Th In

tern

atio

nal Co

nfe

rence

on Co

mposite

Structu

res

Tornabene copertina_ICCS20_proceedings.indd 1 24/07/2017 11:39:28

Conservatoire national des arts et mtiers, Paris, France 4-7 September 2017

PROCEEDINGS CONFERENCE CHAIRS

LOCAL ORGANIZING COMMITTEE

Editor in chief:

Scientific Committee:

Chief assistant:

First edition:

Publishing Manager:Editorial Staff:

4-7 September 2017 Conservatoire national des arts et mtiers (CNAM), France

ICCS20 Conference Proceedings

20th International Conference on Composite Structures

A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N. Fantuzzi



Pierre Ladevze (Professor Emeritus ENS Cachan Scientific Head of the Structures and Systems Division-LMT Cachan, France)

Hu Heng (Wuhan University, China)

Michele dOttavio (Universit Paris Ouest - Nanterre - La Dfense, France)



Bruno Castani (Head of Composite Group, Institut Clment Ader, University of Toulouse, France)

Dai Gil Lee (Korea Advanced Institute of Scince and Technology, South Korea)



Seung Hwan Chang (LINC Chung-Ang University, Seoul Korea)

Paul Weaver (University of Limerick, Ireland, University of Bristol, UK)

Eelco Jansen (Institute of Structural Analysis, Leibniz University Hannover, Germany)



Philippe Boisse (Directeur de l'Ecole Doctorale MEGA de Lyon, France)

Conor McCarthy (University of Limerick, Ireland)

Joo Rama Correia (Instituto Superior Tcnico, CEris, Universidade de Lisboa, Portugal)



Kim Meow Liew (City University of Hong Kong, China)

Erasmo Carrera (MUL2 group, DIMEAS, Politecnico di Torino, Italy) Alfonso Pagani (MUL2 group, DIMEAS, Politecnico di Torino, Italy) Marco Petrolo (MUL2 group, DIMEAS, Politecnico di Torino, Italy)

Gennady Kulikov (Tambov State Technical University, Russia)

Volnei Tita (University of So Paulo, Brazil)



Christophe Binetruy (Ecole Centrale de Nantes, France)



Yunli Guo (Key Laboratory for Liquid-solid Structural Evolution & Processing of Materials (Ministry of Education), Shandong University, China) Qi Dong (Key Laboratory for Liquid-solid Structural Evolution & Processing of Materials (Ministry of Education), Shandong University, China) Yuxi Jia (jia_yuxi@sdu.edu.cn, Key Laboratory for Liquid-solid Structural Evolution & Processing of Materials (Ministry of Education), Shandong University, China)



Baorui Liu (liubr@spacechina.com, Beijing Institute of Structure and Environment Engineering, China) Zhengping Zhang (Beijing Institute of Structure and Environment Engineering, China) Haibo Li (Beijing Institute of Structure and Environment Engineering, China) Fanjin Kong (Beijing Institute of Structure and Environment Engineering, China) Zhenqiang Wu (Beijing Institute of Structure and Environment Engineering, China) Wugang Liu (Beijing Institute of Structure and Environment Engineering, China)

Haitao Tian (hellotht@gmail.com, LEM3 France) Michel Potier-Ferry (LEM3, France) Farid Abed-Meraim (LEM3, France)

Damian Soko owski (sokolowski.dmn@gmail.com, Faculty of Civil Engineering, Architecture and Environmental Engineering d University of Technology, Poland) Marcin Kami ski (Department of Structural Mechanics, d University of Technology Faculty of Civil Engineering, Architecture and Environmental Engineering, Poland)



Aurora Angela Pisano (aurora.pisano@unirc.it, University Mediterranea of Reggio Calabria, Italy) Paolo Fuschi (University Mediterranea of Reggio Calabria, Italy)



Daniel, E.S. Rodrigues (em11175@fe.up.pt, Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI), University of Porto, Portugal) Jorge, Belinha (Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI), University of Porto, Portugal) Aurlio, L. Arajo (Instituto Superior Tcnico, University of Lisbon, Portugal) Antnio, J.M. Ferreira (Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI), University of Porto, Portugal) Lcia, M.J.S. Dinis (Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI), University of Porto, Portugal) Renato, M. Natal (Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI), University of Porto, Portugal)

Giuseppe, Catania (Alma Mater Studiorum University of Bologna, Italy) Matteo, Strozzi (matteo.strozzi2@unibo.it, Alma Mater Studiorum University of Bologna, Italy)



Fuxing Miao (aifxmiao@gmail.com, Ningbo University, China Fenghua Zhou (Ningbo University, China Zhiwei Cui, (Vehicle Optimization Group, General Motors)

Evangelos Sapountzakis (cvsapoun@central.ntua.gr, School of Civil Engineering, National Technical University of Athens, Greece) Ioannis Dikaros (School of Civil Engineering, National Technical University of Athens, Greece)



Xiangkun Sun (LTDS, Ecole Centrale de Lyon, France) Changwei Zhou (Laboratoire d Acoustique de l'Universit du Maine, France) Mohamed Ichchou (mohamed.ichchou@ec-lyon.fr, LTDS, Ecole Centrale de Lyon, France) Abdel-Malek Zine (ICJ, Ecole Centrale de Lyon, France) Jean-Pierre Lain (LTDS, Ecole Centrale de Lyon, France) Stephane Hans (LTDS, Ecole Nationale des Travaux Publics de lEtat, France) Claude Boutin (LTDS, Ecole Nationale des Travaux Publics de lEtat, France)

Viswanathan, Kodakkal Kannan (visu20@yahoo.com, Kuwait College of Science and Technology, Kuwait) Nor Hafizah, Ahmad Kailani (UTM Centre for Industrial and Applied Mathematics, Universiti Teknologi Malaysia, Malaysia) Zainal, Abdul Aziz (UTM Centre for Industrial and Applied Mathematics, Universiti Teknologi Malaysia, Malaysia)



Piotr Lacki (Czestochowa University of Technology, Poland) Anna Derlatka (aderlatka@bud.pcz.czest.pl, Czestochowa University of Technology, Poland)

Avelino Manuel da Silva Dias (avelino.dias@ct.ufrn.br, UFRN, Brazil) Pedro Ponces Camanho (FEUP, Portugal)

Tams Plskei (poloskei@mm.bme.hu, Budapest University of Technokogy and Economics, Department of Applied Mechanics, Hungary)



Balavishnu Udayakumar (balavishnu.iitm@gmail.com, Aerospace Engineering, IIT Madras, India) K.V. Nagendra Gopal (Aerospace Engineering, IIT Madras, India)

Guo-dong Xu (Harbin University of Science and Technology, China) Tao Zeng (taozeng@hrbust.edu.cn, Harbin University of Science and Technology, China) Su Cheng (Harbin University of Science and Technology, China) Zhi-hai Wang (Harbin University of Science and Technology, China)



Riccardo, Vescovini (riccardo.vescovini@polimi.it, Politecnico di Milano, Italy) Lorenzo, Dozio (Politecnico di Milano, Italy) Michele, D'Ottavio (Universit Paris Nanterre, France) Olivier, Polit (Universit Paris Nanterre, France)

Sarat, Panda (sarat.iitm@gmail.com, Indian Institute of Technology(ISM) Dhanbad, India) Amit, Yadav (Indian Institute of Technology(ISM) Dhanbad, India)

Min Hye, Jung (Korea Institute of Carbon Convergence Technology; Chonbuk National University, South Korea) Jeong Seok, Kang (Korea Institute of Carbon Convergence Technology; Chonbuk National University, South Korea) Hans-Christian Frh (Institut fr Textiltechnik (ITA) der RWTH Aachen University, Aachen, Germany) Christoph Greb (Institut fr Textiltechnik (ITA) der RWTH Aachen University, Aachen, Germany) Seong Su, Kim (seongsukim@kaist.ac.kr, Korea Advanced Institute of Science and Technology (KAIST), South Korea)



Dongil Shin (Seoul National University, South Korea) Soomin Choi (Seoul National University, South Korea) Gang-Won Jang (Sejong University, South Korea) Yoon Young Kim (yykim@snu.ac.kr, Seoul National University, South Korea)

Sigong, Zhang (University of Waterloo, Canada) Lei Xu (lxu@uwaterloo.ca, University of Waterloo, Canada)



Xiandong, Zhou (Department of Mechanics and Engineering Science, College of Engineering, Peking University, China) Kefu, Huang (huangkf@sustc.edu.cn, Department of Mechanics and Aerospace Engineering, Southern University of Science and Technology, China) Zheng, Li (Department of Mechanics and Engineering Science, College of Engineering, Peking University, China)

Chang Hongliang (an522219778@hrbeu.edu.cn, College of Aerospace and Civil Engineering, Harbin Engineering University, China) Li Hong (College of Aerospace and Civil Engineering, Harbin Engineering University, China)

Can Serkan Ibrahimoglu (serkan.ibrahimoglu@metu.edu.tr, Middle East Technical University, Aerospace Engineering Department, Turkey) Altan Kayran (Middle East Technical University, Aerospace Engineering Department., Turkey)



Ghazaleh, Soltanieh (Department of Civil and Environmental Engineering, Amirkabir University of Technology, Tehran, Iran) Mohammad Z., Kabir (mzkabir@aut.ac.ir, Department of Civil and Environmental Engineering, Amirkabir University of Technology, Tehran, Iran) Mohammad Shariyat (shariyat@kntu.ac.ir, Faculty of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran)



Sylwester Samborski (s.samborski@pollub.pl, Lublin University of Technology, Poland)

Muthana S M Al-Saymaree (al-saymareems@cardiff.ac.uk, Cardiff University, UK) David Kennedy (Cardiff University, UK) Carol Featherston (Cardiff University, UK)



Alexandre, Loredo (alexandre.loredo@u-bourgogne.fr, Universit de Bourgogne Franche-Comt, France) Olivier, Polit (Universit Paris Nanterre, France) Michele, D'Ottavio (Universit Paris Nanterre, France) Philippe, Vidal (Universit Paris Nanterre, France)

Thi Huyen Cham, Le (thihuyencham.le@u-paris10.fr, Universit Paris Nanterre, France) Michele, D'Ottavio (Universit Paris Nanterre, France) Philippe, Vidal (Universit Paris Nanterre, France) Olivier, Polit (Universit Paris Nanterre, France)



Karolina Wi niewska (karolina.st.wisniewska@doctorate.put.poznan.pl, Institute of Applied Mechanics, Poznan University of Technology, Poland) Ewa Magnucka-Blandzi (Institute of Mathematics, Poznan University of Technology, Poland)



Miroslav Repka (miroslav.repka@savba.sk, Institute of Construction and Architecture, Slovak Academy of Sciences, Slovakia) Vladimir Sladek (Institute of Construction and Architecture, Slovak Academy of Sciences, Slovakia) Jan Sladek (Institute of Construction and Architecture, Slovak Academy of Sciences, Slovakia)

Yu Wang (School of Engineering, RMIT University, Australia) Chuang Feng (chuang.feng@rmit.edu.au, School of Engineering, RMIT University, Australia) Zhan Zhao (School of Engineering, RMIT University, Australia) Lili Li (School of Engineering, RMIT University, Australia) Jie Yang (School of Engineering, RMIT University, Australia)

Iwona Wstawska (iwona.wstawska@put.poznan.pl, Institute of Applied Mechanics, Poznan University of Technology, Poland)



Jamshid, Fazilati (jfazilati@ari.ac.ir, Aerospace Research Institute, Iran)



Vahid, Khalafi (Aerospace Research Institute, Iran) Jamshid, Fazilati (jfazilati@ari.ac.ir, Aerospace Research Institute, Iran)

Viswanathan, Kodakkal Kannan (visu20@yahoo.com, Kuwait College of Science and Technology, Kuwait) Nurul Izyan, Mat Daud (Dept. of mathematical Sciences, Faculty of Science, Universiti Teknologi Malaysia, Malaysia) Jang Hyun, Lee (Dept. of Naval Architecture and ocean Engineering, Inha University, Korea South) Zainal, Abdul Aziz (Dept. of mathematical Sciences, Faculty of Science, Universiti Teknologi Malaysia, Malaysia)



Vinyas, Mahesh (vinyas.mahesh@gmail.com, Department of Mechanical Engineering, National Institute of Technology Karnataka, India) Piyush J Sagar (Department of Mechanical Engineering, National Institute of Technology Karnataka, India) S.C. Kattimani (Department of Mechanical Engineering, National Institute of Technology Karnataka, India)

Vinyas, Mahesh (vinyas.mahesh@gmail.com, Department of Mechanical Engineering, National Institute of Technology Karnataka, India) Piyush J Sagar (Department of Mechanical Engineering, National Institute of Technology Karnataka, India) S.C. Kattimani (Department of Mechanical Engineering, National Institute of Technology Karnataka, India)

Sung Joon, Kim (yaelin@kari.re.kr, Korea Aerospace Research Institute, South Korea) Sang Wook, Park (Korea Aerospace Research Institute, South Korea) Tae-Uk, Kim (Korea Aerospace Research Institute, South Korea)

Mikolaj Smyczynski (mikolaj.smyczynski@put.poznan.pl, Poznan University of Technology, Poland) Piotr Kedzia (Poznan University of Technology, Poland)



Jan Eike Schnabel (Institute of Materials Research, Materials Mechanics, Helmholtz-Zentrum Geesthacht, Germany) Christian Mittelstedt (christian.mittelstedt@klub.tu-darmstadt.de, Technical University of Darmstadt, Institute for lightweight engineering, Germany)

P. Raghu (raghupiska@gmail.com, Indian Institute of Technology, Hyderabad, India) A. Rajagopal (Indian Institute of Technology, Hyderabad, India)

Xiaobo Zhang (x.zhang-6@tudelft.nl, TU Delft, Netherlands) Henk den Besten (TU Delft, Netherlands) Mirek Kaminski (TU Delft, Netherlands)



Francesco Tornabene (francesco.tornabene@unibo.it, DICAM Department, University of Bologna, Italy) Nicholas Fantuzzi (DICAM Department, University of Bologna, Italy) Michele Bacciocchi (DICAM Department, University of Bologna, Italy) Erasmo Viola (DICAM Department, University of Bologna, Italy)

Nicholas Fantuzzi (DICAM Department, University of Bologna, Italy) Francesco Tornabene (francesco.tornabene@unibo.it, DICAM Department, University of Bologna, Italy) Michele Bacciocchi (DICAM Department, University of Bologna, Italy) Erasmo Viola (DICAM Department, University of Bologna, Italy)



Hao Yang (yanghao_lmu@yahoo.com, Jiangsu University of Science and technology, China; and Leiniz University Hannover, Germany) Xiangyang Xu (Leiniz University Hannover, Germany) Wei Xu (Leiniz University Hannover, Germany) Zarandi Mohammad (Leiniz University Hannover, Germany) Ingo Neumann (Leiniz University Hannover, Germany)

Vidal Philippe (philippe.vidal@u-paris10.fr, Universit Paris Nanterre, France) Gallimard Laurent (Universit Paris Nanterre, France) Polit Olivier (Universit Paris Nanterre, France)

Krzysztof, Magnucki (Institute of Rail Vehicles TABOR, Poznan, Poland) Szymon, Milecki (Institute of Rail Vehicles TABOR, Poznan, Poland) Jerzy, Lewinski (Institute of Rail Vehicles TABOR, Poznan, Poland)Piotr, Kedzia (piotr.kedzia@put.poznan.pl, Institute of Applied Mechanics, Poznan University of Technology, Poznan, Poland)



Barbara Tomczyk (barbara.tomczyk@p.lodz.pl Department of Structural Mechanics, Lodz University of Technology, Poland) Pawe Szczerba (Department of Structural Mechanics, Lodz University of Technology, Poland)

Magdalena, Grygorowicz (magdalena.grygorowicz@put.poznan.pl, Poznan University of Technology, Poland) Piotr, Kedzia (Poznan University of Technology, Poland) Krzysztof, Magnucki (Poznan University of Technology, Poland)

Radoslaw J. Mania (Radoslaw.Mania@p.lodz.pl, Lodz University of Technology, Poland) Dominik Banat (Lodz University of Technology, Poland) Monika Kamocka (Lodz University of Technology, Poland)



S.W. Chung (samuelchung00@gmail.com, University of Utah, USA) S.G. Hong (Seoul National University, Korea South)

Daniel, E.S. Rodrigues (em11175@fe.up.pt, Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI), University of Porto, Portugal) Jorge, Belinha (Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI), University of Porto, Portugal) Aurlio, L. Arajo (Instituto Superior Tcnico, University of Lisbon, Portugal) Antnio, J.M. Ferreira (Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI), University of Porto, Portugal) Lcia, M.J.S. Dinis (Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI), University of Porto, Portugal) Renato, M. Natal (Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI), University of Porto, Portugal)



Lidan Xu (College of Aerospace and Civil Engineering Harbin Engineering University, China) Xiaoyu Sun (sunxiaoyu4321@126.com, College of Aerospace and Civil Engineering Harbin Engineering University, China) Jingbiao Liu (College of Aerospace and Civil Engineering Harbin Engineering University, China) Mingfang Shi (College of Aerospace and Civil Engineering Harbin Engineering University, China)

Elsadig, Mahdi (elsadigms@qu.edu.qa, Qatar University, Qatar) Daniel Roberto Hernndez Ochoa (Universidad Antonio Nario, Colombia) Ashkan Vaziri (Department of Mechanical and Industrial Engineering, Northeastern University, USA)



Alicia, Porras (n-porras@uniandes.edu.co, Structural Integrity Research Group, Mechanical Engineering Department, Universidad de los Andes, Colombia) Alejandro, Maranon (Structural Integrity Research Group, Mechanical Engineering Department, Universidad de los Andes, Colombia) Camilo, Hernandez (Sustainable Design in Mechanical Engineering Research Group (DSIM), Mechanical Engineering Department, Escuela Colombiana de Ingenieria Julio Garavito, Colombia)

Minmin Yu (Donghua University, China) Peng Liu (Donghua University, China) Huihui Zhang (zhh1997@gmail.com, Donghua University, China) Huili Shao (Donghua University, China)



Till Valle (till.vallee@ifam.fraunhofer.de, Fraunhofer-Institut fr Fertigungstechnik und Angewandte Materialforschung IFAM, Germany) Marvin Kaufmann (Fraunhofer-Institut fr Fertigungstechnik und Angewandte Materialforschung IFAM, Germany) Jana Kolbe (Fraunhofer-Institut fr Fertigungstechnik und Angewandte Materialforschung IFAM, Germany) Simon Fecht (Fraunhofer-Institut fr Fertigungstechnik und Angewandte Materialforschung IFAM, Germany)

Dujardin, Nicolas (nicolas.dujardin@u-pec.fr, University of Paris-Est, CERTES laboratory EA 3481, France) Feuillet, Vincent (University of Paris-Est, CERTES laboratory EA 3481, France) Fois, Magali (University of Paris-Est, CERTES laboratory EA 3481, France) Polane, Christophe (University of Caen-Normandie, CIMAP UMR 6252, France) Ibos, Laurent (University of Paris-Est, CERTES laboratory EA 3481, France)



Cuynet, Amlie (amelie.cuynet@univ-smb.fr, Laboratoire SYMME - Universit Savoie Mont Blanc, France) Toussaint, Franck (Laboratoire SYMME - Universit Savoie Mont Blanc, France) Roux, Emile (Laboratoire SYMME - Universit Savoie Mont Blanc, France) Lagache, Manuel (Laboratoire SYMME - Universit Savoie Mont Blanc, France) Scida, Daniel (LISM - Universit de Reims Champagne-Ardenne, France) Ayad, Rezak (LISM - Universit de Reims Champagne-Ardenne, France)



Dayong Hu (School of Transportation Science and Engineering, Beihang University, China; Airworthiness Technologies Research Center, Beihang University, China; Advanced Vehicle Research Center, Beihang University, China) Bin Song (binsong@buaa.edu.cn, School of Transportation Science and Engineering, Beihang University, China; Airworthiness Technologies Research Center, Beihang University, China; Advanced Vehicle Research Center, Beihang University, China)

Jyh-Horng, Wu (eric@nchu.edu.tw, National Chung Hsing University, Taiwan) Teng-Chun, Yang (National Chung Hsing University, Taiwan) Yi-Chi, Chien (National Chung Hsing University, Taiwan)

Teng-Chun Yang (Department of Forestry, National Chung Hsing University, Taiwan) Yi-Chi Chien (Department of Forestry, National Chung Hsing University, Taiwan) Jyh-Horng Wu (eric@nchu.edu.tw, Department of Forestry, National Chung Hsing University, Taiwan)



Lautenschlger, Miriam I. (Miriam.Lautenschlaeger@ict.fhg.de, Fraunhofer Institute for Chemical Technology ICT, Germany) Mayer, Lukas (Karlsruhe Institute of Technology KIT, Germany) Gebauer, Julian (Fraunhofer Institute for Chemical Technology ICT, Germany) Weidenmann, Kay A. (Fraunhofer Institute for Chemical Technology ICT, Karlsruhe Institute of Technology KIT, Germany) Henning, Frank (Fraunhofer Institute for Chemical Technology ICT, Germany) Elsner, Peter (Fraunhofer Institute for Chemical Technology ICT, Karlsruhe Institute of Technology KIT, Germany)



S.R. Atashipour (rasoul.atashipour@chalmers.se, Department of Civil and Environmental Engineering, Division of Structural Engineering, Chalmers University of Technology, Sweden) M. Al-Emrani (Department of Civil and Environmental Engineering, Division of Structural Engineering, Chalmers University of Technology, Sweden) K. Frjd (Department of Civil and Environmental Engineering, Division of Structural Engineering, Chalmers University of Technology, Sweden) A. Hellstrm (Department of Civil and Environmental Engineering, Division of Structural Engineering, Chalmers University of Technology, Sweden)

Atiqah Afzaluddin (Universiti Putra Malaysia, Malaysia) Mohammad Jawaid (jawaid_md@yahoo.co.in, Universiti Putra Malaysia, Malaysia) Salit M. Sapuan (Universiti Putra Malaysia, Malaysia) M.R. Ishak (Universiti Putra Malaysia, Malaysia) O. Y. Alothman (King Saud University, Saudi Arabia)

Mariusz, Urbaniak (mariusz.urbaniak@p.lodz.pl, Lodz University of Technology, Poland) Adrian, Gliszczy ski (Lodz University of Technology, Poland)

ukasz, Borkowski (Lodz University of Technology, Poland)



Dujardin, Nicolas (nicolas.dujardin@u-pec.fr, University of Paris-Est, CERTES laboratory EA 3481, France) Fois, Magali (University of Paris-Est, CERTES laboratory EA 3481, France) Grimau, Mario (Universidad Simaon Bolivar, Material Science Departement, Venezuela) Polane, Christophe (University of Caen-Normandie, CIMAP UMR 6252, France)



Carlos, Rivera-Gmez (Universidad de Sevilla, Spain) Carmen, Galn-Marn (cgalan@us.es, Universidad de Sevilla, Spain)

Nawawi Chouw (n.chouw@auckland.ac.nz, University of Auckland, New Zealand)

Hiro, Tanaka (htanaka@mech.eng.osaka-u.ac.jp, Osaka University, Japan) Kaito, Suga (Osaka University, Japan) Naoki, Iwata (Osaka Univeristy, Japan) Dai, Okumura (Osaka University, Japan) Yoji, Shibutani (Osaka University, Japan)



Md Fazlay, Rabbi (U Mass Dartmouth, USA) Sen, Yang (U Mass Dartmouth, USA) Vijaya, Chalivendra (U Mass Dartmouth) Yong, Kim (ykim@umassd.edu, U Mass Dartmouth, USA)

Yousef Dobah (y.dobah@bristol.ac.uk, ACCIS, University of Bristol, UK) Man Ki Bonly To (ACCIS, University of Bristol, UK) Ioannis Zampetakis (ACCIS, University of Bristol, UK) Fabrizio Scarpa (ACCIS, University of Bristol, UK) Anton Shterenlikht (Department of Mechanical Engineering, University of Bristol, UK)



Johannes, Boblenz (johannes.boblenz@dlr.de, German Aerospace Center (DLR), Germany) Christian, Hhne (German Aerospace Center (DLR), Germany)

Ewa M., Spiesz (e.m.spiesz@tudelft.nl, Department of Bionanoscience & Kavli Institute of Nanoscience, Delft University of Technology, The Netherlands) Dominik T., Schmieden (Department of Bionanoscience & Kavli Institute of Nanoscience, Delft University of Technology, The Netherlands) Jakob, Schwiedrzik (Laboratory for Mechanics of Materials and Nanostructures, Empa Swiss Federal Laboratories for Materials Science and Technology, Switzerland) Antonio M., Grande (Faculty of Aerospace Engineering, Delft University of Technology, The Netherlands) Santiago J., Garcia (Faculty of Aerospace Engineering, Delft University of Technology, The Netherlands) Johann, Michler (Laboratory for Mechanics of Materials and Nanostructures, Empa Swiss Federal Laboratories for Materials Science and Technology, Switzerland) Anne S., Meyer (Department of Bionanoscience & Kavli Institute of Nanoscience, Delft University of Technology, The Netherlands) Marie-Eve, Aubin-Tam (Department of Bionanoscience & Kavli Institute of Nanoscience, Delft University of Technology, The Netherlands)



Bin, Zhang (School of Materials Science and Engineering, Northeastern University, China) Yu-Jia, Yang (School of Materials Science and Engineering, Northeastern University, China) Hai-Feng, Tan (School of Materials Science and Engineering, Northeastern University, China) Xue-Mei, Luo (Institute of Metal Research, Chinese Academy of Sciences) Guang-Ping, Zhang (gpzhang@imr.ac.cn, Institute of Metal Research, Chinese Academy of Sciences, China)

Marcela Mihai (marcelas@icmpp.ro, Petru Poni Institute of Macromolecular Chemistry, Romania) Ana-Lavinia Vasiliu (Petru Poni Institute of Macromolecular Chemistry, Romania) Florica Doroftei (Petru Poni Institute of Macromolecular Chemistry, Romania) Stefania Racovita (Petru Poni Institute of Macromolecular Chemistry, Romania)



Djidjelli, Hocine (hocdjidj@yahoo.fr, LMPA, University of Bejaia, Algeria) Boukerrou, Amar (LMPA, University of Bejaia, Algeria) Chenni Abdenour (LMPA, University of Bejaia, Algeria) J. J. Martinez Vega (Laplace, UPS, Toulouse) Yves Grohens (LIMB, University of Lorient, France) Saulnier Benjamain (LIMB, University of Lorient, France)

Young June Yoon (yoon.youngjune@gmail.com, College of Engineering, Center for Integrated General Education, Hanyang University, South Korea)

Xianfeng, Yang (Institute of Solid Mechanics, Beihang University, China) Jingxuan, Ma (Institute of Solid Mechanics, Beihang University, China) Jialing, Yang (jlyangbuaa@aliyun.com, Institute of Solid Mechanics, Beihang University, China) Yuxing, Sun (Institute of Solid Mechanics, Beihang University, China)



Ali Mehboob (School of Mechanical Engineering, Chung-Ang University, South Korea) Seung-Hwan Chang (phigs4@cau.ac.kr, School of Mechanical Engineering, Chung-Ang University, South Korea)

Ali Mehboob (School of Mechanical Engineering, Chung-Ang University, Korea South) Seung-Hwan Chang (phigs4@cau.ac.kr, School of Mechanical Engineering, Chung-Ang University, Korea South)



Silvestre, Pinho (silvestre.pinho@imperial.ac.uk, Imperial College London, Dept. Aeronautics, UK) Gianmaria, Bullegas (Imperial College London, Dept. Aeronautics, UK) Federico, Narducci (Imperial College London, Dept. Aeronautics, UK) Soraia, Pimenta (Imperial College London, Dept. Mechanical Engineering, UK)

Muhsin Aljuboury (muhsin.aljuboury@plymouth.ac.uk, Plymouth University, UK) Md Jahir Rizvi (Plymouth University, UK) Stephen Grove (Plymouth University, UK) Richard Cullen (Plymouth University, UK)



Yu, Zhang (zhangyu@cup.edu.cn, Institute for Offshore Engineering, China University of Petroleum, China) Ziyun, Cheng (Institute for Offshore Engineering, China University of Petroleum-Beijing, China) Xueqi, Yang (Department of Aeronautics and Astronautics, Fudan University, China) Qilin, Shi (Institute for Offshore Engineering, China University of Petroleum-Beijing, China) Menglan, Duan (Institute for Offshore Engineering, China University of Petroleum-Beijing, China)

Rasha El-Ghazawy Ibrahim (basharosh_00@yahoo.com, Polymer Nanocomposites Center, Egyptian Petroleum Research Institute, Egypt) Hamdy M. Naguib (Polymer Nanocomposites Center, Egyptian Petroleum Research Institute, Egypt) Usama F. Kandil (Polymer Nanocomposites Center, Egyptian Petroleum Research Institute, Egypt) Nevine O. Shaker (Polymer Nanocomposites Center, Egyptian Petroleum Research Institute, Egypt) Mahmoud Reda Taha (Department of Civil Engineering, University of New Mexico, USA)



Mahmoud, Helal (Production and Mechanical Design Dept., Faculty of Engineering, Mansoura University, Egypt & Department of Mechanical Engineering, Faculty of Engineering, Taif University, Saudi Arabia) Noha, Fouda (Production and Mechanical Design Dept., Faculty of Engineering, Mansoura University, Egypt) Elsayed, Fathallah (saidhabib2000@hotmail.com, Department of Civil Engineering, Military Technical College, Egypt) Sherif M.M. Abdekhalek (Production and Mechanical Design Dept, Military Technical College, Egypt)

Elsayed, Fathallah (saidhabib2000@hotmail.com, Department of Civil Engineering, Military Technical College, Egypt) Noha, Fouda (Production and Mechanical Design Dept., Faculty of Engineering, Mansoura University, Egypt) Mahmoud, Helal (Production and Mechanical Design Dept., Faculty of Engineering, Mansoura University, Egypt; Department of Mechanical Engineering, Faculty of Engineering, Taif University, Saudi Arabia) Ashraf, Osman (Department of Civil Engineering, Military Technical College, Egypt)

Akbar Esmaeili (akbaresmaeili@yahoo.com, Department of Chemical Engineering, North Tehran Branch, Islamic Azad University, Iran) Sahar Kakavand (Department of Chemical Engineering, North Tehran Branch, Islamic Azad University, Iran)



M. Chwa (Institute of Machine Design, Cracow University of Technology, Poland) A. Muc (Institute of Machine Design, Cracow University of Technology, Poland) A. Stawiarski (Institute of Machine Design, Cracow University of Technology, Poland) P. Romanowicz (Institute of Machine Design, Cracow University of Technology, Poland) M. Barski (Institute of Machine Design, Cracow University of Technology, Poland)

M. Chwal (Institute of Machine Design, Cracow University of Technology, Poland) M. Barski (Institute of Machine Design, Cracow University of Technology, Poland) A. Muc (Institute of Machine Design, Cracow University of Technology, Poland) A. Stawiarski (Institute of Machine Design, Cracow University of Technology, Poland)

A. Muc (Institute of Machine Design, Cracow University of Technology, Poland) B. Szybi ski (Institute of Machine Design, Cracow University of Technology, Poland) P. K dziora (Institute of Machine Design, Cracow University of Technology, Poland) P. Romanowicz (Institute of Machine Design, Cracow University of Technology, Poland)



P. Romanowicz (Institute of Machine Design, Cracow University of Technology, Poland) M. Barski (Institute of Machine Design, Cracow University of Technology, Poland) B. Szybi ski (Institute of Machine Design, Cracow University of Technology, Poland) A. Muc (Institute of Machine Design, Cracow University of Technology, Poland) P. K dziora (Institute of Machine Design, Cracow University of Technology, Poland)

A. Muc (Cracow University of Technology, Institute of Machine Design, Poland) A. Stawiarski (Cracow University of Technology, Institute of Machine Design, Poland) M. Chwa (Cracow University of Technology, Institute of Machine Design, Poland) P. K dziora (Cracow University of Technology, Institute of Machine Design, Poland)



A. Stawiarski (adam.stawiarski@mech.pk.edu.pl, Institute of Machine Design, Cracow University of Technology, Poland) A. Muc (Institute of Machine Design, Cracow University of Technology, Poland) M. Chwa (Institute of Machine Design, Cracow University of Technology, Poland) M. Barski (Institute of Machine Design, Cracow University of Technology, Poland) P. Romanowicz (Institute of Machine Design, Cracow University of Technology, Poland)

A. Muc (Cracow University of Technology, Institute of Machine Design, Poland) M. Siko (Cracow University of Technology, Institute of Machine Design, Poland) P. K dziora (Cracow University of Technology, Institute of Machine Design, Poland)

Liu Ping Zhang Kaifu (zhangkf@nwpu.edu.cn) Hu Wenqiang



Yousef Payandeh (y-payandeh@araku.ac.ir, Department of Materials Science and Engineering, Faculty of Engineering, Arak University, Iran)

Meriem Ghrib (PIMM Laboratory ENSAM, CNAM, CNRS, France) Mikhail Guskov (mikhail.guskov@ensam.eu, PIMM Laboratory ENSAM, CNAM, CNRS, France) Guillaume Vermot Des Roches (SDTools, France) Etienne Balmes (SDTools, France) Marc Rebillat (PIMM Laboratory ENSAM, CNAM, CNRS, France) Nazih Mechbal (PIMM Laboratory ENSAM, CNAM, CNRS, France)



Jingbiao Liu (liujingbiao1213@163.com, College of Aerospace and Civil Engineering, Harbin Engineering University, China) Zhenqing Wang (College of Aerospace and Civil Engineering, Harbin Engineering University, China) Xiaoyu Sun (College of Aerospace and Civil Engineering, Harbin Engineering University, China) Lidan Xu (College of Aerospace and Civil Engineering, Harbin Engineering University, China)

Koffi Snanou Ledi (koffi-senanou.ledi@univ-lorraine.fr, Universit de Lorraine, LEM3, UMR CNRS 7239, France; GI2M CNRS FR3574, France) Mohamed Hamdaoui (Universit de Lorraine, LEM3, UMR CNRS 7239, France; GI2M CNRS FR3574, France) Guillaume Robin (Universit de Lorraine, LEM3, UMR CNRS 7239, France; GI2M CNRS FR3574, France) El Mostafa Daya (Universit de Lorraine, LEM3, UMR CNRS 7239, France; GI2M CNRS FR3574, France)

Qiang, Gao (seagaoqiang@163.com, Fudan University, China) Menglan, Duan (China University of Petroleum, China) Xueqi, Yang (Fudan University, China) Wenbin, Shi (Fudan University, China) Dongwei, Zhao (China University of Petroleum, China) Chen, An (China University of Petroleum, China) Zhongli, Li (Heibei Jingxian Zebang Rubber Technology, Co., Ltd, China)



Xueqi, Yang (xqyang14@fudan.edu.cn, Department of Aeronautics and Astronautics, Fudan University, China) Menglan, Duan (Department of Aeronautics and Astronautics, Fudan University, China & Institute for Offshore Engineering, China University of Petroleum, China) Qiang, Gao (Department of Aeronautics and Astronautics, Fudan University, China) Yu, Zhang (Institute for Offshore Engineering, China University of Petroleum, China) Zhongli, Li (Hebei Jingxian Zebang Rubber Technology, Co., Ltd, Hengshui, China)

Jeong-Hyeon, Kim (honeybee@pusan.ac.kr, Pusan National University, South Korea) Jeong-Dae, Kim (Pusan National University, South Korea) Jae-Hyeok, Ahn (Pusan National University, South Korea) Seul-Kee Kim (Pusan National University, South Korea) Sungkyun, Park (Pusan National University, South Korea) Kang Hyun, Park (Pusan National University, South Korea) Jae-Myung, Lee (Pusan National University, South Korea)

Jinsup, Kim (jinsup.kim@gnu.ac.kr, Gyeongsang National University, South Korea) Minho, Kwon (Gyeongsang National University, South Korea)



Mohamed, Harhash (mohamed.harhash@tu-clausthal.de, Institute of Metallurgy (IMET), Metal Forming and Processing, Clausthal University of Technology (TUC), Germany) Viktoria, Harms (Institute of Metallurgy (IMET), Metal Forming and Processing, Clausthal University of Technology (TUC), Germany) Adele, Carrad (Institut de Physique et Chimie des Materiaux de Strasbourg, IPCMS, UMR 7504 ULP-CNRS, France) Heinz, Palkowski (Institute of Metallurgy (IMET), Metal Forming and Processing, Clausthal University of Technology (TUC), Germany)

Vincent, Pieuchot (pieuchot@mygale.fr, Univ. Bourgogne Franche-Comt, France) Jrme, Rousseau (DRIVE EA1859, Univ. Bourgogne Franche-Comt, France) Shahram, Aivazzadeh (DRIVE EA1859, Univ. Bourgogne Franche-Comt, France)



Nanda, Wirawan (nanda.wirawan@lapan.go.id, National Institute of Aeronautics and Space, Indonesia) Mahesa, Akbar (The University of Sheffield, United Kingdom)

Fabiana Piano (UFRN, Brazil) Raimundo Carlos Silveri Freire Junior (UFRN, Brazil) Avelino Manuel da Silva Dias (avelino.dias@ct.ufrn.br, UFRN, Brazil)

Fabio Gabrieli (fabio.gabrieli@unipd.it, University of Padova, Italy) Antonio Pol (University of Padova, Italy) Klaus Thoeni (University of Newcastle, Australia)



Zheng, Wang (zheng.wang@uni-paderborn.de, Chair of Automotive Lightweight Design, Paderborn University, Germany) Thomas, Troester (Chair of Automotive Lightweight Design, Paderborn University, Germany)

Maxime Sagnard (maxime.sagnard@ensam.eu) Laurent Berthe Romain Ecault Fabienne Touchard Michel Boustie Kai Brune



Matthew, Bowers (WPI Popovic Labs, USA) Chinmay, Harmalkar (WPI Popovic Labs, USA) Saivimal, Sridar (WPI Alumni, USA) Corey, Majeika (WPI Alumni, USA) Christian, Kaan (WPI Alumni, USA) Germano, Iannacchione (WPI Physics, USA) Marko, Popovic (mpopovic@wpi.edu, WPI Popovic Labs, USA)

Patthamaporn Timakul (patthamt@mtec.or.th) Weerada Rattanaprasit Duangduen Atong Pavadee Aungkavattana



Bin Yang (yangbin@ecust.edu.cn, School of Mechanical and Power Engineering, East China University of Science and Technology, China) Fu-Zhen Xuan (School of Mechanical and Power Engineering, East China University of Science and Technology, China)

F. Dahmene (f.dahmene@isgroupe.com, Institut de Soudure, Plateforme RDI CND, France) S. Yaacoubi (Institut de Soudure, Plateforme RDI CND, France) S. Bittendiebel (Institut de Soudure, Plateforme RDI CND, France) A. Maldachowska (Wroclaw University of Science and Technology, Poland) M. Barcikowski (Wroclaw University of Science and Technology, Poland) M. Panek (Wroclaw University of Science and Technology, Poland) N. Alexandre (CEA, DAM, Le Ripault, France) F. Nony (CEA, DAM, Le Ripault, France) O. Bardoux (Air Liquide Research and Development, France) P. Blanc-Vannet (Air Liquide Research and Development, France) P. Breuer (Hexagon Composites, Raufoss, Norway) P-S. Heggem (Hexagon Composites, Raufoss, Norway)



F. Dahmene (f.dahmene@isgroupe.com, Institut de Soudure, Plateforme RDI CND, France) S. Yaacoubi (Institut de Soudure, Plateforme RDI CND, France) S. Bittendiebel (Institut de Soudure, Plateforme RDI CND, France) A. Maldachowska (Wroclaw University of Science and Technology, Poland) M. Barcikowski (Wroclaw University of Science and Technology, Poland) R. Rybczynski (Wroclaw University of Science and Technology, Poland) N. Alexandre (CEA, DAM, Le Ripault, France) F. Nony (CEA, DAM, Le Ripault, France) O. Bardoux (Air Liquide Research and Development, France) P. Blanc-Vannet (Air Liquide Research and Development, France) K. Lasn (Norwegian University of Science and Technology, Trondheim, Norway) A. Echtermeyer (Norwegian University of Science and Technology, Trondheim, Norway) P. Breuer (Hexagon Composites, Raufoss, Norway) P-S. Heggem (Hexagon Composites, Raufoss, Norway)

Syed Idros Bin Syed Abdullah (s.syed-abdullah14@imperial.ac.uk, Department of Aeronautics, Imperial College London, UK) Lorenzo Iannucci (Department of Aeronautics, Imperial College London, UK) Emile Smith Greenhalgh (Department of Aeronautics, Imperial College London, UK)

Pere Badall (Acondicionamiento Tarrasense Asociacin LEITAT, Spain) Mart Verdaguer (Acondicionamiento Tarrasense Asociacin LEITAT, Spain) Adrin Ortega (aortega@leitat.org, Acondicionamiento Tarrasense Asociacin LEITAT, Spain) Zaida Ortega (Universidad de Las Palmas de Gran Canaria, Spain) Mario D. Monzn (Universidad de Las Palmas de Gran Canaria, Spain)



tepn, Hysek (hyseks@fld.czu.cz, Department of Wood Processing, Czech University of Life Sciences Prague, Czech Republic) Ondrej, Schonfelder (Department of Wood Processing, Czech University of Life Sciences Prague, Czech Republic) Adam, Sikora (Department of Wood Processing, Czech University of Life Sciences Prague, Czech Republic)

Huihui Zhang (zhh1997@gmail.com, Donghua University, China) Yuzeng Li (Donghua University, China) Gesheng Yang (Donghua University, China) Qiao Li (Donghua University, China) Minmin Yu (Donghua University, China) Huili Shao (Donghua University, China)



Shamsher Bahadur, Singh (sbsinghbits@gmail.com, Civil Engineering Department, Birla Institute of Technology and Science Pilani, India) Sudhir, Vummadisetti (Civil Engineering Department, Birla Institute of Technology and Science Pilani, India) Himanshu, Chawla (Civil Engineering Department, Birla Institute of Technology and Science Pilani, India)



Farid Taheri (farid.taheri@dal.ca, Mechanical Engineering, Dalhousie University, Canada)

Brandon Horton (CRASH Lab, The State University of New York, USA) Yangkun Song (CRASH Lab The State University of New York, USA) Dawn Jegley (NASA Langley Research Center) Javid Bayandor (bayandor@buffalo.edu, CRASH Lab The State University of New York at Buffalo, USA)



M. L. Ribeiro (malribei@usp.br, EESC-USP, University of So Paulo, So Carlos School of Engineering, Department of Aeronautical Engineering, Brazil) G.F.O. Ferreira (EESC-USP, University of So Paulo, So Carlos School of Engineering, Department of Aeronautical Engineering, Brazil) R. de Medeiros (UDESC, Santa Catarina State University, Department of Mechanical Engineering, Brazil) A.J.M. Ferreira (University of Porto, Faculty of Engineering, Portugal) Volnei Tita (EESC-USP, University of So Paulo, So Carlos School of Engineering, Department of Aeronautical Engineering, Brazil)

Lutfiye Altay (Ege University, Mechanical Engineering Department, Turkey) Baris Oguz Gurses (Ege University, Mechanical Engineering Department, Turkey) Aysun Guven (aguven@ybu.edu.tr, Ankara Y ld r m Beyaz t University, Mechanical Engineering Department Keiren, Turkey) Mehmet Sarikanat (Ege University, Mechanical Engineering Department, Turkey)



Kristof, Vanclooster (Kristof.vanclooster@siemens.com, Siemens Industry Software NV, Belgium) Fabio, Santos (Siemens Industry Software NV, Belgium) Andrei, Sirbu (Siemens Industry Software NV, Belgium) Bert, Van Genechten (Siemens Industry Software NV, Belgium) Laszlo, Farkas (Siemens Industry Software NV, Belgium)

Jason, Denny (j.denny9312@gmail.com, University of Kwa-Zulu Natal, South Africa) Kirsty Veale (University of Kwa-Zulu Natal, South Africa) Sarp Adali (University of Kwa-Zulu Natal, South Africa) Fiona Leverone (University of Kwa-Zulu Natal, South Africa)



Lindner, Marco (marco.lindner@mb.tu-chemnitz.de, Technische Universitt Chemnitz, Germany) Vanselow, Konrad (Technische Universitt Chemnitz, Germany) Gelbrich, Sandra (Research Group: Lightweight Constructions in Civil Engineering; Technische Universitt Chemnitz, Germany) Kroll, Lothar (Head of Department of Lightweight Structures and Polymer Technology, Director of IST, Director of Affiliated Institute CETEX, Dean for Research, International Relations and Gender of the Faculty Mechanical Engineering Technische Universitt Chemnitz, Germany)

Yuefa Zhou (13206523722@163.com, College of Aerospace and Civil Engineering, Harbin Engineering University China) Qunkai Chen (College of Aerospace and Civil Engineering, Harbin Engineering University China) Xiaoxu Guo (College of Aerospace and Civil Engineering, Harbin Engineering University China)



Abakar Malloum Nougra (malloum.abakar.etu@univ-lemans.fr) El Mahi Abderrahim Moustapha Idriss

Qingxun Meng (qingxunmeng@gmail.com, Department of Mechanical Engineering, Northwestern Polytechnical University, China) Kaifu Zhang (Department of Mechanical Engineering, Northwestern Polytechnical University, China) Hui Cheng (Department of Mechanical Engineering, Northwestern Polytechnical University, China) Guoyi Hou (Department of Mechanical Engineering, Northwestern Polytechnical University, China)

Hongjie Sun (sunhongjie1973@163.com, Aerospace Research Institute of Materials & Processing Technology, China) Jianbao Zhang (Aerospace Research Institute of Materials & Processing Technology, China) Yu Zhou (Aerospace Research Institute of Materials & Processing Technology, China) Kai Yi (Aerospace Research Institute of Materials & Processing Technology, China)

Qimao Liu (qimao.liu@se.abb.com ABB Corporate Research Center, Sweden)



Yucheng, Zhong (yzhong1@e.ntu.edu.sg, School of Science, Wuhan University of Technology, China) Ravindrababu, Suraj (Temasek Laboratories @ NTU, Nanyang Technological University, Singapore) Dongfeng, Cao (State Key Laboratory of Materials Synthesis and Processing, Wuhan University of Technology, China) Shuxin, Li (State Key Laboratory of Materials Synthesis and Processing, Wuhan University of Technology, China) Elvin Ser Ming, Chia (DSO National Laboratories, Singapore) Sunil Chandrakant, Joshi (School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore) Zhong, Chen (School of Materials Science and Engineering, Nanyang Technological University, Singapore)

Vahideh Shahedifar (Materials Engineering University of Tabriz, Iran) Mahdi Ghassemi Kakroudi (mg_kakroudi@tabrizu.ac.ir, Materials Engineering University of Tabriz, Iran) Nasser Pourmohammadie Vafa (Materials Engineering University of Tabriz, Iran)



Sara, Garzon-Hernandez (Carlos III University, Madrid, Spain) Daniel, Garca-Gonzlez (University of Oxford, Oxford, UK) Alexis, Rusinek (Lorraine Universit, Metz, France) Rodrigue, Matadi-Boumbimba (Lorraine Universit, Metz, France) Angel, Arias (aariash@ing.uc3m.es, Carlos III University, Madrid, Spain)

Ibrahim Kr ad Trko lu (Amasya University, Technology Faculty, Automotive Eng. Dept., Turkey) Ycel Can (yucel.can@renault.com, R&D Center, Renault Automotive Company, Turkey) Murat Yazici (Uludag University, Engineering Faculty, Automotive Engineering Department, Turkey)

Ycel Can (yucel.can@renault.com, R&D Center, Renault Automotive Company, Turkey) Harun Gl (Uludag University, Engineering Faculty, Automotive Engineering Department, Turkey) Ibrahim Kr ad Trko lu (Amasya University, Technology Faculty, Automotive Eng. Dept., Turkey) Murat Yazici (Uludag University, Engineering Faculty, Automotive Engineering Department, Turkey)



Susanna, Laurenzi (susanna.laurenzi@uniroma1.it, Department of Astronautic, Electrical and Energy Engineering, Sapienza University of Rome, Italy) Fabrizio, Poscente (Thales Alenia Space Italia S.p.A, Italy) Mario, Lanuti (Thales Alenia Space Italia S.p.A, Italy)

Jaroslaw Bienias (j.bienias@pollub.pl, Department of Materials Engineering, Faculty of Mechanical Engineering, Lublin University of Technology, Poland) Monika Ostapiuk (Department of Materials Engineering, Faculty of Mechanical Engineering, Lublin University of Technology, Poland) Barbara Surowska (Department of Materials Engineering, Faculty of Mechanical Engineering, Lublin University of Technology, Poland)



Vasiliki Loukodimou (vaso.loukodimou@cranfield.ac.uk, Cranfield University, UK) Mihalis C. Kazilas (TWI Ltd, UK) Alexandros A. Skordos (Cranfield University, UK)

Liu Ping Zhang Kaifu (zhangkf@nwpu.edu.cn) Hu Wenqiang



Patryk, Jakubczak (p.jakubczak@pollub.pl, Department of Materials Engineering, Faculty of Mechanical Engineering, Lublin University of Technology, Poland) Jaros aw, Bienia (Department of Materials Engineering, Faculty of Mechanical Engineering, Lublin University of Technology, Poland) Krzysztof, Majerski (Department of Materials Engineering, Faculty of Mechanical Engineering, Lublin University of Technology, Poland) Barbara, Surowska (Department of Materials Engineering, Faculty of Mechanical Engineering, Lublin University of Technology, Poland)



Rongqiao, Wang (School of Energy and Power Engineering, Beihang University, China) Long, Zhang (School of Energy and Power Engineering, Beihang University, China) Dianyin, Hu (hdy@buaa.edu.cn, School of Energy and Power Engineering, Beihang University, China) Chongdu, Cho (Department of Mechanical Engineering, Inha University, South Korea) Bo, Li (Department of Mechanical and Aerospace Engineering, Case Western Reserve University, USA)

Susmita Naskar (r01sn15@abdn.ac.uk) Srinivas Sriramula

Susmita Naskar (r01sn15@abdn.ac.uk) Tanmoy Mukhopadhyay Srinivas Sriramula



Hyung-Joon Bang (bang@kier.re.kr, Korea Institute of Energy Research, South Korea) Soo-Hyun Kim (Korea Institute of Energy Research, South Korea)

Hongjie Sun (sunhongjie1973@163.com, Aerospace Research Institute of Materials & Processing Technology, China) Jianbao Xhang (Aerospace Research Institute of Materials & Processing Technology, China) Yu Zhou (Aerospace Research Institute of Materials & Processing Technology, China) Kai Yi (Aerospace Research Institute of Materials & Processing Technology, China)



Carolin Zinn (zinn@lwk.upb.de, Paderborn University, Chair of Materials Science (LWK), Germany) Zheng Wang (Paderborn University, Chair of Automotive Lightweight Design (LiA), Germany) Mirko Schaper (Paderborn University, Chair of Materials Science (LWK), Germany) Thomas Troester (Paderborn University, Chair of Automotive Lightweight Design (LiA), Germany)

David Moncayo (david.moncayo@daimler.com, Daimler AG, Germany) Daniel Coutellier (University of Valenciennes, France) Pedro Ponce Camanho (University of Porto, Portugal) Christian Glggler (DAIMLER AG, Germany)



Marek Barski (mbar@mech.pk.edu.pl, Institute of Machine Design, Faculty of Mechanical Engineering, Cracow University of Technology, Poland) Mateusz Wygoda (Institute of Machine Design, Faculty of Mechanical Engineering, Cracow University of Technology, Poland) Przemys aw Daniel Pastuszak (Institute of Machine Design, Faculty of Mechanical Engineering, Cracow University of Technology, Poland)

Wolff, Johannes (johannes.wolff@dlr.de) Skibbe, Jan



Guangping, Zou (Harbin Engineering University, China) Yuyang, Wang (wyy8888@hrbeu.edu.cn, Harbin Engineering University, China) Zhongliang, Chang (Harbin Engineering University, China)

Jianhua Zhang (zjh@hrbeu.edu.cn, Harbin Engineering University, China) Chengyu Guan (Harbin Engineering University, China) Lili Tong (Harbin Engineering University, China)

Jianhua Zhang (zjh@hrbeu.edu.cn, Harbin Engineering University, China) Chengyu Guan (Harbin Engineering University, China) Won Hee Kang (Western Sydney University, Australia) Lili Tong (Harbin Engineering University, China)



Fatih, Yildiz (Dept. of Mechanical Eng., Erzurum Technical University, Turkey) Salih, Akpinar (salih.akpinar@erzurum.edu.tr, Dept. of Mechanical Eng., Erzurum Technical University, Turkey) Adnan, zel (Dept. of Mechanical Eng., Erzincan University, Turkey)

Halim, Kovaci (Ataturk University, Faculty of Engineering, Department of Mechanical Engineering, Turkey) A. Fatih, Yetim (fatih.yetim@erzurum.edu.tr, Erzurum Technical University, Faculty of Engineering and Architecture, Department of Mechanical Engineering, Turkey) zlem, Baran (Erzincan University, Faculty of Engineering, Department of Mechanical Engineering, Turkey) Ayhan, elik (Ataturk University, Faculty of Engineering, Department of Mechanical Engineering, Turkey)



Ahmed M. Ismail (International Institute for Urban Systems Engineering, Southeast University, China) Mohamed F.M. Fahmy (International Institute for Urban Systems Engineering, Southeast University, China; Civil Engineering Dept., Faculty of Engineering, Assiut University, Egypt) Zhishen Wu (zswu@seu.edu.cn, International Institute for Urban Systems Engineering, Southeast University, China)

Heow Pueh, Lee (mpeleehp@nus.edu.sg, National University of Singapore, Singapore) Tran Le, Ngoc (Singapore Institute of Manufacturing Technology, Singapore) Wern Tze, Teo (Singapore Institute of Manufacturing Technology, Singapore) Umeyr, Kureemun (National University of Singapore, Singapore)

Salih Akpinar (salih.akpinar@erzurum.edu.tr, Erzurum Technical University, Turkey) Adnan Ozel (Erzincan University, Turkey)



Salih Akpinar (salih.akpinar@erzurum.edu.tr, Dept. of Mechanical Eng., Erzurum Technical University, Turkey) Adnan Ozel (Dept. of Mechanical Eng., Erzincan University, Turkey)

Hochard, Christian (hochard@lma.cnrs-mrs.fr, Laboratoire de Mcanique et d'Acoustique, France) Lahellec, Nol (Laboratoire de Mcanique et d'Acoustique, France) Montagnier, Olivier (Laboratoire de Mcanique et d'Acoustique, France)



Pham Chi Vinh (pcvinh@gmail.com, Hanoi University of Science, Faculty of Mathematics, Mechanics and Informatics, Vietnam) Nguyen Thi Kieu (Hanoi Architectural University, Faculty of Civil Engineering, Vietnam)

Kvin Bonnay (kevin.bonnay@irt-jules-verne.fr, IRT Jules Verne & LEM3 UMR CNRS 7239, France) Clment Nony-Davadie (IRT Jules Verne & Arts et Metiers Paristech, LEM3 UMR CNRS 7239, France) Yves Chemisky (Arts et Metiers Paristech, LEM3 UMR CNRS 7239, France) Georges Chatzigeorgiou (Arts et Metiers Paristech, LEM3 UMR CNRS 7239, France) Fodil Meraghni (Arts et Metiers Paristech, LEM3 UMR CNRS 7239, France)



George, Chatzigeorgiou (georges.chatzigeorgiou@ensam.eu, LEM3, UMR 7239, Arts et Mtiers ParisTech, France) Dimitrios, Anagnostou (LEM3, UMR 7239, Arts et Mtiers ParisTech, France) Yves, Chemisky (LEM3, UMR 7239, Arts et Mtiers ParisTech, France) Fodil, Meraghni (LEM3, UMR 7239, Arts et Mtiers ParisTech, France)



Serena, Ferraro (sferraro@caltech.edu, California Institute of Technology, United States) Sergio, Pellegrino (California Institute of Technology, United States)

Aurelio, Araujo (aurelio.araujo@tecnico.ulisboa.pt, IDMEC, Instituto Superior Tecnico, Universidade de Lisboa, Portugal) Filipa, Moleiro (IDMEC, Instituto Superior Tecnico, Universidade de Lisboa, Portugal) Cristovao, Mota Soares (IDMEC, Instituto Superior Tecnico, Universidade de Lisboa, Portugal) Jorge, Belinha (Department of Mechanical Engineering, Faculty of Engineering, University of Porto, Portugal) Antonio, Ferreira (Department of Mechanical Engineering, Faculty of Engineering, University of Porto, Portugal)



ZhenZhou Wang, (zw9e14@soton.ac.uk, University of Southampton, UK) Adam Sobey, (University of Southampton, UK)

Aleksandr Fomin (afominalex@gmail.com, Yuri Gagarin State Technical University of Saratov, Russia) Marina Fomina (Yuri Gagarin State Technical University of Saratov, Russia) Vladimir Koshuro (Yuri Gagarin State Technical University of Saratov, Russia) Igor Rodionov (Yuri Gagarin State Technical University of Saratov, Russia)



Vladimir Koshuro (Yuri Gagarin State Technical University of Saratov, Russia) Marina Fomina (Yuri Gagarin State Technical University of Saratov, Russia) Aleksey Voyko (Yuri Gagarin State Technical University of Saratov, Russia) Igor Rodionov (Yuri Gagarin State Technical University of Saratov, Russia) Andrey Zakharevich (Saratov State University named after N.G. Chernyshevsky, Russia) Aleksandr Skaptsov (Saratov State University named after N.G. Chernyshevsky, Russia) Aleksandr Fomin (afominalex@gmail.com, Yuri Gagarin State Technical University of Saratov, Russia)



Carlos Javier (University of Rhode Island, United States) Helio Matos (University of Rhode Island, United States) James LeBlanc (Naval Undersea Warfare Center, Newport Rhode Island, United States) Arun Shukla (shuklaa@uri.edu, University of Rhode Island, United States)

Magdalena Susniak (susniak@agh.edu.pl, AGH University of Science and Technology, Poland) Konrad Lasek (AGH University of Science and Technology, Poland) Maja Nowak (AGH University of Science and Technology, Poland) Pawe Pa ka (AGH University of Science and Technology, Poland) Bartosz Su kowski (AGH University of Science and Technology, Poland)

Soraia Pimenta (soraia.pimenta@imperial.ac.uk, Imperial College London, UK) David B Anthony (Imperial College London, UK) Gianmaria Bullegas (Imperial College London, UK) Gael Grail (Imperial College London, UK) Milo S P Shaffer (Imperial College London, UK) Silvestre Pinho (Imperial College London, UK) Paul Robinson (Imperial College London, UK)



Shirsendu, Sikdar (ssikdar@imp.gda.pl, Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Poland) Wies aw, Ostachowicz (Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Poland) Joy Pal (Department of Civil Engineering, Indian Institute of Technology Bombay, India) Pawel, Kudela (Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Poland) Maciej, Radzie ski (Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Poland)

Joanna Karwan-Baczewska (jokaba@agh.edu.pl) Aleksandra Franczak



Merve zkutlu (Department of Chemical Engineering, Middle East Tehcnical University, Turkey) Cerag Dilek (Department of Chemical Engineering, Middle East Tehcnical University, Turkey) Gknur Bayram (gbayram@metu.edu.tr, Department of Chemical Engineering, Middle East Tehcnical University, Turkey)

Giuseppina Ambrogio (DIMEG - University of Calabria, Italy) Romina Conte (DIMEG - University of Calabria, Italy) Diego Pulice (DIMEG - University of Calabria, Italy) Francesco Gagliardi (francesco.gagliardi@unical.it, DIMEG - University of Calabria, Italy) Giorgio Simeoli (CRdC Tecnologie scarl, Italy) Pietro Russo (Institute for Polymers, Composites and Biomaterials, Italy) Luigino Filice (DIMEG - University of Calabria, Italy)



Thibaut Vogel (thibaut.vogel@airbus.com, Airbus Group Innovations, France) Pascal Casari (Universit de Nantes, France) Jean-Christophe Walrick (ESTACA Laval, France)



Jie Wang (jie.wang@insa-lyon.fr, Universit de Lyon, LaMCoS, INSA-Lyon, France) Nahiene Hamila (Universit de Lyon, LaMCoS, INSA-Lyon, France) Philippe Boisse (Universit de Lyon, LaMCoS, INSA-Lyon, France)

Trauth, Anna (anna.trauth@kit.edu, Karlsruhe Institute of Technology, Institute for Applied Materials, Germany) Weidenmann, Kay Andr (Karlsruhe Institute of Technology, Institute for Applied Materials, Germany)



Vincenzo, Oliveri (vincenzo.oliveri@ul.ie, Bernal Institute, School of Engineering, University of Limerick, Ireland) Alberto, Milazzo (University of Palermo, Italy) Paul M., Weaver (Bernal Institute, School of Engineering, University of Limerick, Ireland)

Gennady M. Kulikov (gmkulikov@mail.ru, Tambov State Technical University, Russia)



Ilinzeer, Sergej (Karlsruhe Institute of Technology KIT, Germany) Rupp, Peter (peter.rupp2@kit.edu, Karlsruhe Institute of Technology KIT, Germany) Weidenmann, Kay (Karlsruhe Institute of Technology KIT, Germany) Elsner, Peter (Karlsruhe Institute of Technology KIT, Fraunhofer Institute for Chemical Technology ICT, Germany)

Roberto Capozucca (r.capozucca@univpm.it, UNIVPM, Italy) Erica Magagnini (UNIVPM, Italy)



Pawe Czapski (pawel0czapski@gmail.com, Department of Strength of Materials, Lodz University of Technology, Poland) Tomasz Kubiak (Department of Strength of Materials, Lodz University of Technology, Poland)

Ahmed, Amna (amna.ahmed@etud.u-picardie.fr, Laboratoire de Physique des Systmes Complexes, Universite Picardie Jules Verne, France) Chaker, Yassine (Laboratoire de Synthse et Catalyse, Universit de Tiaret, Algrie) Abbas, Ouissam (Centre de Recherche en Agronomie de Wallonie, Belgique) Courty, Matthieu (LRCS, Universite Picardie Jules Verne, France) Chotard, Jean-Noel (LRCS, Universite Picardie Jules Verne, France) Wadouachi, Anne (LG2A, Universite Picardie Jules Verne, France) Bresson, Serge (PSC, Universite Picardie Jules Verne, France)

Chung, S.W. (University of Utah, USA) Hong, S.G. (Seoul National University, South Korea) Ju, G.S. (Yeung Nam University, Tae Gu, South Korea)



Marcela Mihai (marcelas@icmpp.ro, "Petru Poni" Institute of Macromolecular Chemistry, Romania) Ana-Lavinia Vasiliu ("Petru Poni" Institute of Macromolecular Chemistry, Romania) Florica Doroftei (Petru Poni Institute of Macromolecular Chemistry, Romania) Cristian Barbu-Mic ("Petru Poni" Institute of Macromolecular Chemistry, Romania) Stefania Racovita ("Petru Poni" Institute of Macromolecular Chemistry, Romania)

Mohamed Amine Benhenni (benhennia8@gmail.com, Facult des Sciences appliques, Laboratoire Technologie Industrielle, Universit Tiaret, Algeria) Belkacem Adim (Facult des Sciences appliques, Laboratoire de gomatique et dveloppement durable, Universit Tiaret, Algeria) Tahar Hassaine Daouadji (Facult des Sciences appliques, Laboratoire de gomatique et dveloppement durable, Universit Tiaret, Algeria) Ahmed Bouzidane (Facult des Sciences appliques, Laboratoire Technologie Industrielle, Universit Tiaret, Algeria) Boussad Abbes (Laoratoire crespi Moulin de la housse, Universit de Reims, France) Yu Ming Li (Laoratoire crespi Moulin de la housse, Universit de Reims, France)



Marian, Babiak (Department of Wood Processing, Czech University of Life Sciences Prague) Milan, Gaff (Department of Wood Processing, Czech University of Life Sciences Prague) tepn, Hysek (Department of Wood Processing, Czech University of Life Sciences Prague) Adam, Sikora (Department of Wood Processing, Czech University of Life Sciences)

Marian, Babiak (Department of Wood Processing, Czech University of Life Sciences, Czech Republic) Milan, Gaff (gaffmilan@gmail.com, Department of Wood Processing, Czech University of Life Sciences, Czech Republic) tepn, Hysek (Department of Wood Processing, Czech University of Life Sciences, Czech Republic) Adam, Sikora (Department of Wood Processing, Czech University of Life Sciences, Czech Republic)

Milan, Gaff (gaffmilan@gmail.com, Department of Wood Processing, Czech University of Life Sciences, Czech Republic) Marian, Babiak (Department of Wood Processing, Czech University of Life Sciences, Czech Republic)

Milan, Gaff (gaffmilan@gmail.com, Department of Wood Processing, Czech University of Life Sciences Prague, Czech Republic) Marian, Babiak (Department of Wood Processing, Czech University of Life Sciences Prague, Czech Republic)



Milan, Gaff (Department of Wood Processing, Czech University of Life Sciences Prague) tepn, Hysek, Department of Wood Processing, Czech University of Life Sciences Prague) Adam, Sikora, Department of Wood Processing, Czech University of Life Sciences Prague

tepn, Hysek (Department of Wood Processing, Czech University of Life Sciences Prague) Milan, Gaff (Department of Wood Processing, Czech University of Life Sciences Prague) Adam, Sikora (Department of Wood Processing, Czech University of Life Sciences Prague)

Adam, Sikora (Department of Wood Processing, Czech University of Life Sciences Prague) Milan, Gaff (Department of Wood Processing, Czech University of Life Sciences Prague) tepn, Hysek (Department of Wood Processing, Czech University of Life Sciences Prague)



Hak Gu Lee (hakgulee@kau.ac.kr, Korea Aerospace University, South Korea) Jungwan Lee (KIMS, South Korea)

Amar Boukerrou (aboukerrou@yahoo.fr, Universiy of Bejaia, Algeria) Dalila Hammiche (University of Bejaia, Algeria) Hocine Djidjelli (University of Bejaia, Algeria)

Jean Gulla (jean.gulla@iut-tarbes.fr, Institut Clment Ader, France) Xiaojing Gong (Institut Clment Ader, France) Arthur Cantarel (Institut Clment Ader, France) Marie-Laetitia Pastor (Institut Clment Ader, France)



Mohammad Arsalan, Khan (mohd.arsalan.khan@hotmail.co.uk, Aligarh Muslim University, India) Gaurav, Singh (Aligarh Muslim University, India) Jamal, Ahmad (Aligarh Muslim University, India)

Mohammad Arsalan, Khan (mohd.arsalan.khan@hotmail.co.uk, Aligarh Muslim University, India) Ahmed, Elsheikh (University of Dundee, United Kingdom) Iqtedar Ahmad, Khan (University of Dundee, United Kingdom)



Binod, Aryal (b.aryal@student.unsw.edu.au, School of Engineering and Information Technology, University of New South Wales at The Australian Defence Force Academy, Australia) Evgeny V., Morozov (School of Engineering and Information Technology, University of New South Wales at The Australian Defence Force Academy, Australia) Krishna, Shankar (School of Engineering and Information Technology, University of New South Wales at The Australian Defence Force Academy, Australia) Ahmed M., Thabet (School of Environment, Science and Engineering, Southern Cross University, Australia) Peter J., Moore (School of Engineering and Information Technology, University of New South Wales at The Australian Defence Force Academy, Australia)

Jihed Zghal (jihed.zghal@ec-nantes.fr, GeM UMR CNRS-Centrale Nantes, France) Amine Ammar (LAMPA, Arts et Metiers ParisTech, France) Francisco Chinesta (High Performance Computing Institute ICI , Centrale Nantes, France) Christophe Binetruy (GeM UMR CNRS-Centrale Nantes, France) Emmanuelle Abisset-Chavanne (High Performance Computing Institute ICI , Centrale Nantes, France)



Sorin Miclos (miclos@inoe.ro, National Institute of R&D for Optoelectronics INOE-2000, Romania) Dan Savastru (National Institute of R&D for Optoelectronics INOE-2000, Romania) Roxana Savastru (National Institute of R&D for Optoelectronics INOE-2000, Romania) Ion Lancranjan (National Institute of R&D for Optoelectronics INOE-2000, Romania)



Dan Savastru (National Institute of R&D for Optoelectronics INOE-2000, Romania) Sorin Miclos (miclos@inoe.ro, National Institute of R&D for Optoelectronics INOE-2000, Romania) Roxana Savastru (National Institute of R&D for Optoelectronics INOE-2000, Romania) Ion Lancranjan (National Institute of R&D for Optoelectronics INOE-2000, Romania)

Ester Jaln (Department of Continuum Mechanics and Structural Analysis, Universidad Carlos III de Madrid, Spain) Jos Antonio Loya (Department of Continuum Mechanics and Structural Analysis, Universidad Carlos III de Madrid, Spain) Carlos Santiuste (csantius@ing.uc3m.es, Department of Continuum Mechanics and Structural Analysis, Universidad Carlos III de Madrid, Spain)



Marcin Kami ski (Marcin.Kaminski@p.lodz.pl, Department of Structural Mechanics, Faculty of Civil Engineering, Architecture and Environmental Engineering, Poland)

Iclal Avinc Akpinar (Independent Researcher, Turkey) Salih Akpinar (salih.akpinar@erzurum.edu.tr, Erzurum Technical University, Turkey) Belin Kanar (Erzurum Technical University, Turkey) Hamit Akbulut (Ataturk University, Turkey) Adnan Ozel (Erzincan University, Turkey)

Chung, S.W. (samuelchung00@gmail.com, University of Utah, USA) Hong, S.G. (Seoul National University, South Korea)



Vladimir Sladek (vladimir.sladek@savba.sk, Institute of Construction and Architecture, Slovak Academy of Sciences, Slovakia) Miroslav Repka (Institute of Construction and Architecture, Slovak Academy of Sciences, Slovakia) Jan Sladek (Institute of Construction and Architecture, Slovak Academy of Sciences, Slovakia)

Min-Gu Han (School of Mechanical Engineering, Chung-Ang University, Korea South) Seung-Woo Jeon (School of Mechanical System Engineering, Chung-Ang University, Korea South) Sung-Woo Lee (School of Mechanical Engineering, Chung-Ang University, Korea South) Yong Hyeon Cho (Korea Railroad Research Institute, Korea South) Seung-Hwan Chang (phigs4@cau.ac.kr, School of Mechanical Engineering, Chung-Ang University, Korea South)

Ji-Hun Bae (School of Mechanical Engineering, Chung-Ang University, Korea South) Min-Gu Han (School of Mechanical Engineering, Chung-Ang University, Korea South) Seung-Hwan Chang (phigs4@cau.ac.kr, School of Mechanical Engineering, Chung-Ang University, Korea South)



U.N.D. Perera (Department of Civil Engineering, University of Moratuwa, Sri Lanka) J.C.P.H. Gamage (kgamage@uom.lk, Department of Civil Engineering, University of Moratuwa, Sri Lanka)

J.C.P.H. Gamage (kgamage@uom.lk, University of Moratuwa, Sri Lanka) H.A. Dissanayake (University of Moratuwa, Sri Lanka)

Dong-Hyun, Kim (Department of Mechanical Convergence Engineering, Hanyang University, South Korea) Kyu-Hyun, Jung (Department of Mechanical Convergence Engineering, Hanyang University, South Korea) Dug-Joong, Kim (Department of Mechanical Convergence Engineering, Hanyang University, South Korea) Jae-Young, Lim (Hyundai Motor Group R&D division, South Korea) Byeung-Gun, Nam (Hyundai Motor Group R&D division, South Korea) Hak-Sung, Kim (kima@hanyang.ac.kr, Department of Mechanical Convergence Engineering, Hanyang University, South Korea; Institute of Nano Science and Technology, Hanyang University, South Korea)



Do-Hyoung, Kim (Hanyang University, South Korea) Ku-Hyun, Jung (Hanyang Uni

structural and computational iccs20...

Documents

3/86 · -xps 6wduwv 'hdg 9hklfoh %dwwhulhv 3oxj dqg 3od\...

iraq tsc paper piii126 v13 1701 - environmental science ......

vlfdo surshuwlhv wkdw · doorzlqj hqjlqhhuv wr ghvljq...

isabe 2019 24087 merkler final - centreline · 2021. 3....

28670 bro lng terminal - linde engineering · 6dihw\ dqg...

bijemgroup profile (4apr16) final · 93urgxfw ghyhorsphqw...

dqg dv jxdugldqvri wkhlu plqru fklog vlwxdwhg -88/ … ·...

abodez & acorn holdings - cambridge, ma · 2014. 11....

benchmark infrastructure & cost guide v2019-1 · ghvljq dqg...

&855,&8/80 9,7$( '5 $6,) $/, %+$77, · ³6 @$5(1( %$6('...

dqg hujrqrplf ghvljq hqvxuhv wkh 3urihvvlrqdov … · 7...

$oh[dqguh...

adobe photoshop pdf · 2015-10-02 · ©disney r 3dlqw d...

&$86( 12 bbbbbbbbbbbbbbbbbbbbbb 3odlqwlii (/, /,//< $1'...

de d )250,6$12 $qwrqlr dqg '( 0$77(,6 *ldqiudqfr f et al...

radiolabs company profile 2019 preda€¦ · 5dglr/dev lv d...

inst354esg1 spring2020 perine (v2) - ischool...&rxuvh 'hvljq...

project case study rehabilitation of the pulaski skyway...

inventor curved surfaces modeling curved surfaces

resume paolo fornasiero 2017 - cnr...³1hz gluhfwlrqv lq...